160 manufacturers · 18,987 products

The GKO Gekko features a sleek wedge form factor in two housing sizes, with a wide range of CCT and lumen package options. Complete with sensor and battery options, the GKO produces zero uplight in any configuration for maximum versatility.

The Lumière Eon 303 Bollard luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is constructed from machined and extruded aluminum creating a sealed optical compartment. The LED bollard provides a zero uplight solution with a fixed head in 8.5W, 15.5W, or 30.6W configurations. The Eon Bollard luminaires are ideal for pathway or general ground mount illumination where greater lateral or forward throw illumination is needed. Photocell control options are available.

HALO's LT Recessed LED Trims are all-purpose LED Trims designed to install into new construction or remodel recessed housings. Choose the perfect color temperature lighting for the project using the switch and select one of five positions between warm white (2700K) and daylight (5000K). The LT Series offer a non-conductive dead-front trim and regressed diffuse flat lens with multiple versions with a variety of lumen outputs for tackling various ceiling heights. When looking for a low-cost alternative to HALO's mainstay RL Series, the LT product line is an excellent choice.

Delivered Lumens: 475lm 2700K, 3000K CRI: 85 Power: 6W Input: 9-15 VAC, 50/60Hz Rated Life: 70000 Hours Construction: Corrosion resistant aluminum alloy Continuously adjustable beam angles, indexed at 20°, 35°, 60° IP66 Rated, protected against high-pressure water jets Constant output for 9V-15V input Can be used as an uplight or downlight 2700K or 3000K color temperature Mounting stake, detachable shroud, 6' lead wire and direct burial gel-filled wire nuts included MLV dimmable with remote MLV dimmer Transformer required Can be mounted on ceiling or wall in all orientations

Delivered Lumens: 2000lm 2700K, 3000K, 4000K CRI: 85 Power: 15-35W Input: 9-15 VAC, 50/60Hz Rated Life: 50000 Hours Construction: Corrosion resistant aluminum alloy Adjustable and lockable beam angle Integral dimmer IP66 Rated, protected against high-pressure water jets Includes a detachable shroud Factory sealed water-tight fixtures Mounting stake, 6' lead wire and direct burial gel-filled wire nuts included Maintains constant lumen output against voltage drop Not suitable to use with external dimmers Transformer required Can be mounted on ceiling or wall in all orientations

Delivered Lumens: 1160lm 2700K, 3000K, 4000K CRI: 85 Power: 1-18W Input: 9-15 VAC, 50/60Hz Rated Life: 70000 Hours Construction: Corrosion resistant aluminum alloy Adjustable and lockable beam angle Integral dimmer Includes a detachable shroud Factory sealed water-tight fixtures Mounting stake, 6' lead wire and direct burial gel-filled wire nuts included Maintains constant lumen output against voltage drop MLV dimmable with remote MLV dimmer Transformer required Can be mounted on ceiling or wall in all orientations

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: UMC-98001 A modern style die-cast aluminum catenary suspended decorative lantern with excellent downward light distribution. Outstanding visual appeal and precision optical system gives very low glare rating, whilst reducing light pollution. Occupancy and Daylight sensors can be incorporated into the luminaire. Color temperature 2700K, 3000K, 3500K and 4000K, LED CRI >80 and life time 50,000 Hours. Stainless steel screws. Durable silicone rubber gasket and clear tempered glass. Powder paint with high corrosion resistance with chemical chromatised protection. Integral control gear. Customer specifice wattages can be provided, please contact the factory for more information.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: USE-900XX  A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.