160 manufacturers · 18,987 products

The GKO Gekko features a sleek wedge form factor in two housing sizes, with a wide range of CCT and lumen package options. Complete with sensor and battery options, the GKO produces zero uplight in any configuration for maximum versatility.

HALO's LT Recessed LED Trims are all-purpose LED Trims designed to install into new construction or remodel recessed housings. Choose the perfect color temperature lighting for the project using the switch and select one of five positions between warm white (2700K) and daylight (5000K). The LT Series offer a non-conductive dead-front trim and regressed diffuse flat lens with multiple versions with a variety of lumen outputs for tackling various ceiling heights. When looking for a low-cost alternative to HALO's mainstay RL Series, the LT product line is an excellent choice.

Endurance™ Motion Sensor in Architectural Black

Horizontal Step and Wall Light with Photocell in Black Aluminum

Delivered Lumens: 475lm 2700K, 3000K CRI: 85 Power: 6W Input: 9-15 VAC, 50/60Hz Rated Life: 70000 Hours Construction: Corrosion resistant aluminum alloy Continuously adjustable beam angles, indexed at 20°, 35°, 60° IP66 Rated, protected against high-pressure water jets Constant output for 9V-15V input Can be used as an uplight or downlight 2700K or 3000K color temperature Mounting stake, detachable shroud, 6' lead wire and direct burial gel-filled wire nuts included MLV dimmable with remote MLV dimmer Transformer required Can be mounted on ceiling or wall in all orientations

Delivered Lumens: 2000lm 2700K, 3000K, 4000K CRI: 85 Power: 15-35W Input: 9-15 VAC, 50/60Hz Rated Life: 50000 Hours Construction: Corrosion resistant aluminum alloy Adjustable and lockable beam angle Integral dimmer IP66 Rated, protected against high-pressure water jets Includes a detachable shroud Factory sealed water-tight fixtures Mounting stake, 6' lead wire and direct burial gel-filled wire nuts included Maintains constant lumen output against voltage drop Not suitable to use with external dimmers Transformer required Can be mounted on ceiling or wall in all orientations

Delivered Lumens: 2150lm 3000K, 4000K CRI: 85 Power: 13-31W Input: 120 VAC, 50/60Hz Rated Life: 50000 Hours Construction: Solid die-cast brass Adjustable and lockable beam angle Integral dimmer IP66 Rated, protected against high-pressure water jets Includes a detachable shroud Factory sealed water-tight fixtures 6' lead wire and direct burial gel-filled wire nuts included Maintains constant lumen output against voltage drop Not suitable to use with external dimmers Driver concealed within the fixture Can be mounted on ceiling or wall in all orientations

Delivered Lumens: 1160lm 2700K, 3000K, 4000K CRI: 85 Power: 1-18W Input: 9-15 VAC, 50/60Hz Rated Life: 70000 Hours Construction: Corrosion resistant aluminum alloy Adjustable and lockable beam angle Integral dimmer Includes a detachable shroud Factory sealed water-tight fixtures Mounting stake, 6' lead wire and direct burial gel-filled wire nuts included Maintains constant lumen output against voltage drop MLV dimmable with remote MLV dimmer Transformer required Can be mounted on ceiling or wall in all orientations

Delivered Lumens: Up to 900lm 3000K CRI: 85 Power: 3.5-14.5W Input: 120 VAC, 50/60Hz Rated Life: 50000 Hours Construction: Solid die-cast brass Adjustable and lockable beam angle Integral dimmer Includes a detachable shroud Factory sealed water-tight fixtures Not suitable to use with external dimmers Driver concealed within the fixture Can be mounted on ceiling or wall in all orientations

Model#: UMC-98001 A modern style die-cast aluminum catenary suspended decorative lantern with excellent downward light distribution. Outstanding visual appeal and precision optical system gives very low glare rating, whilst reducing light pollution. Occupancy and Daylight sensors can be incorporated into the luminaire. Color temperature 2700K, 3000K, 3500K and 4000K, LED CRI >80 and life time 50,000 Hours. Stainless steel screws. Durable silicone rubber gasket and clear tempered glass. Powder paint with high corrosion resistance with chemical chromatised protection. Integral control gear. Customer specifice wattages can be provided, please contact the factory for more information.

The LITE Industrial Fixture Mount High / Low Bay Sensors (WIK-WH / WIM-WH) are an integral part of the WaveLinx LITE system and offer passive infrared (PIR) occupancy and a photocell for closed loop daylighting. WaveLinx industrial sensors offer installation heights up to 45 feet and have coverage patterns up to 5000 square feet (see sensor specifications - field of view). When part of the WaveLinx LITE system, the sensor operates on a wireless mesh network based on IEEE 802.15.1 standards. The sensors offer simple tool-less integration into WaveLinx industrial light fixtures equipped with the 4-pin Zhaga Book 18 compliant socket. Once installed, sensors receive power from their co-located light fixture with no batteries to replace. The sensor in combination with the WaveLinx LITE Mobile application allows you to gain considerable energy savings from occupancy and daylight sensing lighting control. The WaveLinx LITE Mobile application allows you to map the sensor to any area or control zone, select occupancy or vacancy, occupied and unoccupied light levels and set the hold time.

The WaveLinx LITE Industrial Sidecar Sensor Kit (WIM-WH-SKIT) is an integral part of the WaveLinx Lite Connected Lighting System and offers 120-277VAC 6-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx LITE Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The PRO Outdoor Fixture High / Low Mount Sensor (SWPD*) offers passive infrared (PIR) occupancy with a photocell for closed loop daylight sensing. The sensors are IP66 rated for outdoor site and indoor environments with installation heights up to 40 feet and coverage up to 5000 square feet. Easy tool-less fixture connection (Zhaga Book 18 socket) with out of the box controls functionality. Available color options: white, black and bronze.

The WaveLinx PRO Industrial Sidecar Sensor Kit (SWPD*-WH-SKIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The WaveLinx PRO Industrial Fixture Mount High / Low Bay Sensors (SWPD*) offer passive infrared (PIR) occupancy with a photocell for closed loop daylight sensing. The sensors are IP66 rated for warehouse, manufacturing and industrial spaces with installation heights up to 40 feet and coverage up to 2500 square feet. Easy tool-less fixture connection (Zhaga Book 18 socket) with out of the box controls functionality.

The WaveLinx PRO Industrial Standalone Sensor Kit (SWPD*-KIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous 0-10V dimming control of LED and non-LED loads. The intended use of the kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx Industrial integrated sensor. Alternatively, the WaveLinx Industrial Standalone Sensor Kit can provide occupancy inputs to the WaveLinx system when not directly connected to loads.

Take smart lighting to the next level with the UNB Network Lighting Control Telecell, the world’s most deployed wireless controller, proudly powered by Telensa. With over 2 million nodes installed globally and more than a decade of proven performance, this compact powerhouse is no larger than a standard photocell and is available for every luminaire type, including decorative fixtures. Engineered for reliability and scalability, the Telecell provides robust control and monitoring capabilities across expansive networks.

Delivering reliable, city-wide lighting control, the Ultra Narrow Band (UNB) Network Lighting Control Base Station from Trellix Infrastructure is built for scale and simplicity. Powered by Telensa, this base station enables dedicated wireless connectivity for thousands of connected lighting fixtures, ensuring seamless operations with minimal ongoing costs. Designed for rapid deployment and long-term performance, it’s the smart choice for future-ready infrastructure.