160 manufacturers · 18,987 products

Pre-terminated Control Cable, couplers and splitters connect the Room Controller or DLVP power module and devices simplifying the Click & Go connection enabling automatic functionality upon power up. Cables are pre-terminated with industry standard RJ45 connectors.

The OSW-P-1001-MV Passive Infrared Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. In Automatic On Mode, the lights turn ON when a person enters the room. In Manual On Mode, the lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as one of the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with Incandescent, LED, Fluorescent, CFL, MLV, ELV or 1/2 HP motor load.

The DSRC-FMOIR is an open loop daylight sensor that measures the natural light contribution in order to automatically adjust the lighting zones. It is part of the Room Controller and DLVP system and provides three easily distinguished light levels, Low (3-300 lux), High (30-3000 lux), and Direct Sun (300-30000 lux). The high light sensor range is selected by default, although this can be adjusted using the IR handheld programmer.

The 37 pin receptacle kit is used with the Greengate Patient Control Station to provide an interface to the Greengate Lighting control panel, Nurse Call System and the entertainment System. The 37 Pin receptacle kit includes: Three pigtails, Stainless steel wall plate, Receptacle/dummy plug, Class 2 low voltage wiring.

The 0-10 Volt Slide Dimmer provides full-range classic linear-slide dimming for 0-10V compatible dimmable light sources. These units are ideal for light commercial applications and are compatible with decorator style devices and wallplates. The preset “ON/OFF” switch automatically returns controlled light(s) to a preset level without disturbing the brightness level. The device is designed for both Single-pole (one location) and 3-way (multi-location) applications.

The Dual Technology Low Voltage Occupancy Sensing Wall Switch is a motion sensing lighting control that is used for energy savings and convenience and utilizes an isolated form-C relay that integrates directly with lighting control, building, and HVAC systems. The ONW-D-1001-SP combines Ultrasonic and Passive Infrared (PIR) sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings. HVAC mode allows the load connected to the Form C BAS relay to remain ON when the lights are turned OFF manually.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. The ONW-D-1001-MV-N combines Ultrasonic and Passive Infrared (PIR) sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The Room Controller Wallstation Coupler is used when a primary wallstation is needed to control multiple room controller or DLVP units. When the Wallstation Coupler is connected to multiple wallstations, the primary wallstation will override any scene currently selected by any connected wallstation.

Combining the functionality of a switchpack, a sensor, and a 0-10V dimmer, this convenient wallbox device saves labor costs and reduces installation times. What's more: it meets all the latest energy codes and standards, including Title 24.

The passive infrared Extreme Temperature Sensor provides consistent, stable coverage where extreme heat, cold or humidity must be accommodated, and where there are wide fluctuations in temperature. Temperature compensating circuitry stabilizes sensitivity at temperatures –40°F to 125°F (-40°C to 52°C). Ambient light control circuit to avoid False ON/OFF from brief changes in background light. Lighting sweep function with selectable DIP Switch prevents unnecessary “lights ON” following power sweeps in facilities with computer control systems

The MicroSet Ultrasonic Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The ultrasonic sensor uses the Doppler principle. It produces a low intensity, inaudible sound and detects changes in sound waves caused by motion, such as walking into the room, reaching for the telephone, or turning in a chair. They are volumetric in nature and therefore not line-of-sight dependent. Since they fill the space with these sound waves, they are excellent in bathrooms with stalls, enclosed hallways, or other oddly shaped rooms. In addition, they are much more sensitive to smaller motions. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Outdoor Contact Input Photosensor is a system accessory for Greengate lighting control systems. It allows control of lighting levels based on how much natural light is present and is intended for outdoor use. This system accessory is used in conjunction with a lighting control panel to switch circuits ON or OFF based on outdoor light levels. The Outdoor Contact Input Photosensor connects to the control panel low voltage switch inputs. The photosensor constantly monitors the level of sunlight and provides a signal to the lighting control panel when the light level crosses the switching threshold.

The Analog Photosensor is a system accessory for Greengate lighting control systems. It allows control of lighting levels based on how much natural light is present. Photosensors use a lens to gather light energy and provide an electrical signal to a controller device that is proportional to the measured light level. The sensor sensitivity is fixed, and based upon the sensor range selected. Available in indoor, outdoor, atrium, and skylight configurations.

The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OMC-DT sensors are also equipped with MicroSet self-adjusting technology which provides an adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. MicroSet self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period. Available as Buy American compliant.

The Dual Technology Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-DMV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OAWC-DT sensors are also equipped with MicroSet self-adjusting technology which provides an adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. Self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period. Manual On feature for use with 1 or 2 momentary switches controlling 1 or more Switchpacks.

The Passive Infrared (PIR) Single Relay Vacancy Sensing Wall Switch with Night Light is a lighting control and wall switch all-in-one that is used for energy savings and convenience. VNLW-P-1001-MV-N is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. The night light activates when the sensor turns the lights OFF. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Passive Infrared Low Voltage Occupancy Sensing Wall Switch is a motion sensing lighting control and that is used for energy savings and convenience. The wall switch that utilizes an isolated Form-C relay that integrates directly with lighting control, building, and HVAC systems. The ONW-P-1001-SP is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings. HVAC mode allows the load connected to the Form C BAS relay to remain ON when the lights are turned OFF manually.

The TSW-MV is ideal for conformance to energy codes where assurance is needed that lights are turned OFF when not in use and an occupancy sensor is not the best application.

The MicroSet Passive Infrared Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. For units to sense motion, the person must cross between two segments. PIR sensors are considered line-of sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Forward Power Dimmers are system accessories for Cooper lighting control systems. It allows dimming control of 2 or 3-wire loads via 0-10V control signals. Each module includes a backbox, heatsink, temperature sensor to monitor operating temperature.

Scene wallstations are pre-engraved low voltage switches that operate on 24 VDC power supplied by the Room Controller or DLVP power module. Each scene wallstation is designed to fit in a standard decorator opening and has two QuickConnect ports for local network connections to eliminate wiring errors. Scene wallstations are Click & Go ready and work immediately upon power up. Click & Go scene wallstations are fully functional out-of-the-box but can be customized to meet your needs using the Room Controller Personal Remote to adjust and save the scene settings.

The Heavy Duty Switchpack provides 15 VDC operating voltage to all low voltage, 15 VDC, occupancy sensors and daylighting controllers. A single powerpack can provide power for up to five sensors. Up to ten switchpacks can be connected to one sensor for control of multiple circuits. Isolated contacts may also be used to control HVAC, contactors, motors, etc.

The MicroSet Passive Infrared Line Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor is available in both single and dual load control.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-MV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The EISSBox™ is a Virtual End Node (VEN) device installed at the customer site and receives secure OpenADR 2.0 web services from the Utility and provides a signal to the lighting control system.

The SP20-RD4 is the latest addition to the Greengate Switchpacks family, delivering a wide array of switching solutions in a single unit. This robust powerpack is designed to deliver unmatched performance. The SP20-RD4 features robust and reliable mechanical latching relays, exclusive fail-safe circuitry, daylight harvesting, bi-level switching and is configurable for energy code requirements. The switchpack is specifically designed to handle high inrush electronic ballast loads and offer unmatched durability and service.

1200VA, 120/277 Volt AC 60Hz, Single-Pole & 3-Way, WBSD-010M-C1 Preset Electro-Mechanical Electronic 0-10VDC Fluorescent Slide Dimmer, 0-10VDC LED Power Supply Dimmer, Suitable for use with Class 1 or Class 2 wiring - White face assembled on device, Ivory and Light Almond color change kits included. The WBSD-010M-C1 can control a load directly or connect to the SP20-RD4 as a manual pushbutton to toggle the load.

The Distributed Low-Voltage Power System personal remote is a handheld IR device used to customize the intensity of LED lighting control zones to achieve a desired lighting scene. The personal remote can also be used to save a created lighting scene to a scene wall station and a scene button on the personal remote for easy recall. The personal remote communicates with the system through an IR interface which is part of an open-loop daylight sensor or closed-loop fixture integrated sensor.

The VSW-P-0801-120 Passive Infrared Single or Multi-way Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. The VSW-P-0801-120 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with incandescent, LED, fluorescent, CFL, MLV, ELV or 1/6 HP motor load.

The Momentary Decorator Switch is a system accessory for the Greengate Lighting Control System. This switch is recommended for most low voltage switching applications and fits a standard decorator wallplate. The Momentary Decorator Switch is a low voltage contact closure device used with Greengate Lighting Control Panels and Occupancy Sensors. When toggled, the switch momentarily makes a contact closure to the lighting control panel or occupancy sensor, sending an “ON” signal. When not pressed, the switch is in the (open) position.

The Momentary Toggle Switch is a low voltage contact closure switch used with Greengate Lighting Control Panels. When toggled up or down, the switch momentarily makes a contact closure to the lighting control panel, sending an “On” signal and has a center “Off” position. These switches have 0.050” (1.27mm) zinc-plated thick steel mounting straps for corrosion resistance and the combination slot/Phillips head mounting and terminal screws make for ease of installation.

The BMS Pro products are feature-rich, high performance protocol translators which allows data exchange between Cooper's (Greengate, WaveLinx Wired and Fifth Light) lighting control systems and the Building Automation Systems and other third party systems using standard based communication protocols. The BMS Pro 2 converts Cooper’s Greengate, WaveLinx Wired and Fifth Light lighting control systems’ protocols to BACnet/IP, BACnet MS/TP, Modbus TCP/IP, Modbus RTU.

Fifth Light’s Lighting Control Panel (LCP) is used to control and operate all lighting devices using Digital and Addressable Lighting Interface (DALI) and low-voltage analog signals. It houses the lighting controller, lighting management software and various types of lighting interface modules. Modular design capable to support up to 32 DALI Bus Cards, 48 Digital input cards and 9 Analog Input interfaces hence providing lighting engineers and contractors the flexibility and scalability needed to support all sizes and types of lighting applications, i.e. from small or large facilities, fluorescent to LED, local to networked architecture. Intuitive web based user interface allowing users to manage their lighting system from different computing platforms (desktops, laptops, smart phones, tablets) with access the lighting control network. Factory assembled and pre-wired Lighting Control Panel ready to be installed by the electrical contractor with minimal wiring and eliminating non-valued added on-site panel assembly and wire termination work. LED diagnostics indicators and built-in commissioning mode allowing contractors to easily test and commission the DALI Bus hence reducing the overall commissioning time of a DALI based lighting management system. Built to operate as a local Lighting Control Panel or as part of a distributed lighting control network with multiple lighting control panels and a Central Server Unit for a centralized management of large lighting control system.

Fifth Light’s Relay Panel provides scalable and modular On/Off control over a lighting panel as part of a DALI system for convenient control of multiple On/Off loads.

Fifth Light’s Lighting Management Software (LMS) allows facility managers to design, configure and maintain their facility’s lighting system. The LMS governs all the devices connected to the Fifth Light lighting control panels and the control strategies for each of these devices. Using this intuitive, web-based software application, facility managers are able to easily analyze the building’s lighting system usage and quickly update the system to improve the energy consumption.

Fifth Light‘s XML integration module permits 3rd party systems to control and manage the addressable lighting control system. It allows facility managers to provide energy savings and user comfort by easily integrating multiple systems using Web Services.

The Fifth Light Virtual Central Manager is an virtualization-ready application tested and certified for a virtual environment powered by VMWare® software. The virtualization-ready application consists of the lighting management software application and the required operating system to run the application. In today’s economy, facility managers must find ways to do more with less, which means reducing operating costs while maintaining the building’s systems. The Fifth Light Virtual Central Manager provides the following benefits. Reducing Hardware Cost – With the Virtual Central Manager, there is no need for dedicated hardware to run the Central Manager. Facility and Utility Cost – In addition to removing the need for dedicated computer hardware, the Virtual Central Manager also reduces the space, power and maintenance required to run the lighting control system. System Availability – The Virtual Central Manager allows users to update their OS, applications and hardware without having to worry about disrupting daily building operations or having hardware/software compatibility issues.

The Fifth Light Sensor Powerpack provides power to low voltage sensors and communicates occupancy data status to the Fifth Light system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.

The Multi-Sensor (OCS-D-P06 / OCS-D-P12) combines daylight sensing and occupancy detection into a single device. The Multi-Sensor communicates over the two wire communication bus and allows for all device settings and groups to be adjusted remotely.

The Digital to Analog Converter (DAC) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting two wire communications bus.

Flexile Midnight

The Nevis Outdoor Large Floor Lamp by Sean Lavin for Tech Lighting is incredibly versatile. Its clean lines, tapered spun metal shade and slim frame combine for a simple and beautiful modern silhouette. The integrated LED light highlights any indoor or outdoor living space, inviting an allure of coastal presence and vacation living. • Modern outdoor floor lamp with aluminum spun metal drum shade • Highlights any indoor or outdoor living space, inviting an allure of coastal presence and vacation living • Ideal for residential, hospitality and commercial applications • Includes winterized cover • Integrated 3-step touch-dimmer. Includes 8 feet of cloth cord • Protected by a 5-year warranty. Please visit the “About Us” Page on techlighting.com for more for warranty details

The Karam Medium Table Lamp by Sean Lavin for Tech Lighting invites function and elegance to a space, joining texture and scale to its contrasting design elements. The hand-combed artisanal ceramic base and smooth sleek brass shade convey a distinctive layering of light with a distinctly natural feel. • Hand combed ceramic base • Natural brass shade • Includes integrated in-line dimmer with 6 feet black cloth cord • This item is made of natural brass. It is a living finish that will patina and warm with age which adds richness. If it gets an uneven patina or spots, a brass cleaner can restore the finish • Protected by a 5-year warranty. Please visit the “About Us” Page on techlighting.com for more for warranty details

The Karam Large Table Lamp by Sean Lavin for Tech Lighting invites function and elegance to a space, joining texture and scale to its contrasting design elements. The hand-combed artisanal ceramic base and smooth sleek brass shade convey a distinctive layering of light with a distinctly natural feel. • Hand combed ceramic base • Natural brass shade • Includes integrated in-line dimmer with 6 feet black cloth cord • This item is made of natural brass. It is a living finish that will patina and warm with age which adds richness. If it gets an uneven patina or spots, a brass cleaner can restore the finish • Protected by a 5-year warranty. Please visit the “About Us” Page on techlighting.com for more for warranty details

The Lucia Outdoor Large Floor Lamp by Sean Lavin for Tech Lighting is incredibly versatile. Its clean lines, slightly tapered cylindrical metal shade and slim frame combine for a simple and beautiful modern silhouette. The integrated LED light highlights any indoor or outdoor living space, inviting an allure of coastal presence and vacation living. • Modern outdoor floor lamp with aluminum spun metal drum shade • Highlights any indoor or outdoor living space, inviting an allure of coastal presence and vacation living • Ideal for residential, hospitality and commercial applications • Includes winterized cover • Integrated 3-step touch-dimmer. Includes 8 feet of cloth cord • Protected by a 5-year warranty. Please visit the “About Us” Page on techlighting.com for more for warranty details

The Karla Table Lamp by Sean Lavin for Tech Lighting inspired by the Bauhaus movement celebrating the embodiment of artistic form and function through the design of a ballerina’s perfectly arced silhouette. The dramatic backwards curve holds an LED light guide panel beautifully illuminate the surrounding area. Offered in modern finishes. • Inspired by the Bauhaus movement celebrating the embodiment of artistic form and function through the design of a ballerina’s perfectly arced silhouette. • Offered in modern finishes • This item is made of natural brass. It is a living finish that will patina and warm with age which adds richness. If it gets an uneven patina or spots, a brass cleaner can restore the finish • Designed with an integrated 3-step touch-dimmer. • Includes 6 feet of black cloth cord • Protected by a 5-year warranty. Please visit the “About Us” Page on techlighting.com for more for warranty details

Klee 18 Table Lamp by Sean Lavin for Tech Lighting is inspired by the Bauhaus movement with minimalist straight lines and a thin LED light guide panel set on a beautiful White Marble base. Great for task lighting, the Klee 18 Table Lamp arm rotates 35° in each direction to place light where you need it most. An integrated 3-step touch dimmer is conveniently designed to achieve your desired ambiance. Available in modern finishes. Complete the look with the entire Klee collection, including Chandelier, Wall Sconce and Floor Lamp. • Klee is inspired by the Bauhaus movement with minimalist straight lines and a thin LED light guide panel. • Available in modern finishes • Includes 6 feet of black cloth cord • Integrated 3-step touch-dimmer • This item is made of natural brass. It is a living finish that will patina and warm with age which adds richness. If it gets an uneven patina or spots, a brass cleaner can restore the finish • Protected by a 5-year warranty. Please visit the “About Us” Page on techlighting.com for more for warranty details

The Klee 43 Floor Lamp by Sean Lavin for Tech Lighting features a modern minimalist design with clean, geometric lines inspired by the Bauhaus movement. Great for task lighting, a thin light guide panel with integrated LEDs is placed at the end of a 43" metal rod. Illuminated arm rotates in each direction 35° to place light where you need it most. An integrated 3-step touch dimmer is conveniently designed to achieve your desired ambiance. Available in modern finishes. Complete the look with the entire Klee collection, including Chandelier, Wall Sconce, Table Lamp and a larger size Floor Lamp. • Klee 43 Floor Lamp features a modern minimalist design with clean, geometric lines inspired by the Bauhaus movement. • Includes 6 feet of black cloth cord • Great for task lighting, integrated LED arm rotates in each direction 35° to place light where you need it most. • An integrated 3-step touch dimmer conveniently designed to achieve your desired ambiance. • This item is made of natural brass. It is a living finish that will patina and warm with age which adds richness. If it gets an uneven patina or spots, a brass cleaner can restore the finish • Protected by a 5-year warranty. please visit the “About Us” Page on techlighting.com for more for warranty details

Klee 70 Table Lamp by Sean Lavin for Tech Lighting features a modern minimalist design with clean, geometric lines inspired by the Bauhaus movement. Designed with an integrated 3-step touch-dimmer to achieve your desired ambiance. Available in modern finishes. Complete the look with the full Klee Collection including a shorter Floor Lamp with pivoting head, Table Lamp, Wall Sconce and Chandelier. • Features a modern minimalist design with clean, geometric lines inspired by the Bauhaus movement. • Available in modern finishes • Includes 6 feet of black cloth cord • Integrated 3-step touch-dimmer • This item is made of natural brass. It is a living finish that will patina and warm with age which adds richness. If it gets an uneven patina or spots, a brass cleaner can restore the finish • Protected by a 5-year warranty. Please visit the “About Us” Page on techlighting.com for more for warranty details

The Kadia 16 Table Lamp by Sean Lavin was designed to reflect the balance between form and function. Featuring linear geometry, the thin illuminating arm is counter balanced with a robust base. Offered in modern finishes. The modern fixture includes an integrated 3-step touch dimmer to conveniently achieve your preferred ambiance. • Contemporary Modern Style • Featuring linear geometry, a thin illuminating arm is counter balanced with a robust base • Designed to reflect the balance between form and function • Fixture includes an integrated 3-step touch dimmer to conveniently achieve your preferred ambiance. Includes 6 feet of black cloth cord • This item is made of natural brass. It is a living finish that will patina and warm with age which adds richness. If it gets an uneven patina or spots, a brass cleaner can restore the finish • Protected by a 5-year warranty. Please visit the “About Us” Page on techlighting.com for more for warranty details

The Mina Table Lamp by Sean Lavin for Tech Lighting features an elegant sphere of pure optic crystal elegantly resting on a metal or marble base. This beautiful orb is laser-etched and further illuminated by a powerful firing hidden LED making this a glowing work of art when illuminated and modern décor when unilluminated. Available in modern finishes. Designed with an integrated 3-step touch dimmer conveniently designed to achieve your desired ambiance. Complete the look with coordinating Mina Wall Sconce and Line-Voltage Pendants. • A beautiful resting crystal orb, laser-etched and illuminated by a powerful firing LED. • This item is made of natural brass. It is a living finish that will patina and warm with age which adds richness. If it gets an uneven patina or spots, a brass cleaner can restore the finish • Complete the look with coordinating Line-Voltage Pendants and Wall Sconce • Integrated 3-step touch-dimmer • Includes 6 feet of black cloth cord • Protected by a 5-year warranty, please visit the “About Us” Page on techlighting.com for more for warranty details

The Rohe Table Lamp by Sean Lavin for Tech Lighting is the essence of modern appeal with its tall body and symmetrical geometry providing general and task illumination. Inspired by the city skyline of Chicago, this table lamp emulates the classic structure of architectural beauty. Designed with a rolling dimmer switch in the 6 foot cord, the Rohe is modern art when turned off and modern lighting when illuminated. Available in modern finishes. • Designed with appreciation of the city skyline architecture, Rohe reflects modern appeal with its tall body and symmetrical geometry • Available in modern finishes • Includes 6 feet of black cloth cord • Rolling dimmer-switch included in cord • This item is made of natural brass. It is a living finish that will patina and warm with age which adds richness. If it gets an uneven patina or spots, a brass cleaner can restore the finish • Protected by a 5-year warranty. Please visit the “About Us” Page on techlighting.com for more for warranty details

Grace by Sean Lavin for Tech Lighting is designed with two rings that illuminate this contemporary chandelier. A large weathered oak outer ring has organic texture complemented by a decorative black inner ring housing gently diffused upward and downward LEDs. Featuring integrated LED technology on the inner ring, the Grace chandelier provides a graceful halo of light. Lamping options are compatible with most dimmers. Refer to the Dimming Chart for more information. • Halo of light is gracefully created by two rings with integrated LED technology • Available as a weathered oak ring with a black inner ring • Ships with 12 feet of field-cuttable cable • Dimmable with low-voltage electronic dimmer • Protected by a 5-year warranty. please visit the “About Us” Page on techlighting.com for more for warranty details

Grace by Sean Lavin for Tech Lighting is designed with two rings that illuminate this contemporary chandelier. A large weathered oak outer ring has organic texture complemented by a decorative black inner ring housing gently diffused upward and downward LEDs. Featuring integrated LED technology on the inner ring, the Grace chandelier provides a graceful halo of light. Lamping options are compatible with most dimmers. Refer to the Dimming Chart for more information • Halo of light is gracefully created by two rings with integrated LED technology • Available as a weathered oak ring with a black inner ring • Ships with 12 feet of field-cuttable cable • Dimmable with low-voltage electronic dimmer • Protected by a 5-year warranty. please visit the “About Us” Page on techlighting.com for more for warranty details

LED includes 25 watt, 1149 delivered lumen, 2700K or 3000K LED module. Dimmable with low-voltage electronic or triac dimmer. ADA compliant. May be mounted vertically or horizontally.

Includes three 12" stems, two 6" stems and one 3" stem. LED includes (8) 6.3 watt, 56 watts total, 3011 total delivered lumens 90 CRI 3000K LED module. Dimmable with a low-voltage electronic dimmer. 120v or 277v. Can be installed o ... (See Spec Sheet)

The Everett Table Lamp by Sean Lavin for Tech Lighting complements the American Modern lifestyle with simple geometric shapes and a modern frame suspending a thin LED acrylic panel. This fixture is functional and decorative with a design that reflects modern art when off and functional lighting when turned on. An integrated 3-step touch-dimmer is conveniently embedded in the design to achieve your desired ambiance. Offered in modern finishes. • Complementing the American Modern lifestyle with simple geometric shapes and a modern frame suspending a thin LED acrylic panel. • Offered in modern finishes • Includes 6 feet of black cloth cord • Designed with an integrated 3-step touch-dimmer • This item is made of natural brass. It is a living finish that will patina and warm with age which adds richness. If it gets an uneven patina or spots, a brass cleaner can restore the finish • Protected by a 5-year warranty. Please visit the “About Us” Page on techlighting.com for more for warranty details

This PHXF Series CLOSED (120-277VAC) outdoor sign is designed with high-intensity, LED reflected, backlit illumination and a block letter-style message face. The sign message is viewable in daylight conditions when off and can be illuminated at night or in low light conditions to optimize readability.It is designed with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.

This PHXF Series COVID-19 VACCINE REGISTRATION w/ Left Arrow outdoor sign is designed with high-intensity, LED reflected, backlit illumination and a block letter-style message face. The sign message is viewable in daylight conditions when off and can be illuminated at night or in low light conditions to optimize readability.It is designed with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded all-weather frame and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.