160 manufacturers · 18,987 products

The WaveLinx LITE Industrial Sidecar Sensor Kit (WIM-WH-SKIT) is an integral part of the WaveLinx Lite Connected Lighting System and offers 120-277VAC 6-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx LITE Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The PRO Outdoor Fixture High / Low Mount Sensor (SWPD*) offers passive infrared (PIR) occupancy with a photocell for closed loop daylight sensing. The sensors are IP66 rated for outdoor site and indoor environments with installation heights up to 40 feet and coverage up to 5000 square feet. Easy tool-less fixture connection (Zhaga Book 18 socket) with out of the box controls functionality. Available color options: white, black and bronze.

The WaveLinx PRO Industrial Sidecar Sensor Kit (SWPD*-WH-SKIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The WaveLinx PRO Outdoor Lighting Control (WOLC) Module extends the WaveLinx System’s controls capability to a building’s surroundings or site such as parking lots and short pathways. The WOLC Module is individually addressable and installs on top of a light pole via an ANSI 136.41-compliant, 7-pin twist-lock connector. It can switch luminaires ON/OFF via an integrated high current relay and dim luminaires equipped with 0-10V dimming drivers or ballasts. It communicates with the WaveLinx Wireless Area Controller over an IEEE 802.15.4 network.

The WaveLinx Wired Universal Source Controller (SC-UN) lighting control panel sets a new standard in architectural lighting control. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, real-time individual circuit power metering and Phase Sense technology designed to ensure control even during individual phase failure.

The WaveLinx PRO Industrial Fixture Mount High / Low Bay Sensors (SWPD*) offer passive infrared (PIR) occupancy with a photocell for closed loop daylight sensing. The sensors are IP66 rated for warehouse, manufacturing and industrial spaces with installation heights up to 40 feet and coverage up to 2500 square feet. Easy tool-less fixture connection (Zhaga Book 18 socket) with out of the box controls functionality.

CORE Insights App (TRX-INSOCC) is a Space Analytics software application that allows users to monitor, compare and analyze their space usage to increase workplace effectiveness. It gives you dashboards to visualize space occupancy information in real-time and historical time ranges.

The LITE Wireless Outdoor Fixture High / Low Mount Sensor (WLS2 / WLS4) offers passive infrared (PIR) occupancy and a photocell for daylight sensing for installation heights up to 40 feet. The sensor operates on Bluetooth® 4.2 mesh network and offer simple tool-less integration into WaveLinx outdoor light fixtures equipped with the 4-pin Zhaga Book 18 compliant socket. The mobile application allows you to map the sensor to any area or control zone, select occupancy or vacancy, occupied and unoccupied light levels and set the hold time.

The LITE Wireless Tilemount Sensor Kit (WTK) is an accessory to the WaveLinx LITE (WLC) system which may be used with out-of-the-box functionality or commissioned via the WaveLinx LITE mobile application. The wireless tilemount sensor kit is typically used to provide occupancy sensing and daylight dimming for luminaries that cannot include integrated occupancy and daylight sensors.

WaveLinx PRO Integrated Components are available to allow luminaire manufacturers to incorporate WaveLinx Integrated Sensors into their lineup to support WaveLinx project sales. WaveLinx integrated sensor luminaires are an integral of the WaveLinx Wireless System providing motion detection, daylighting, and wireless radio with each having out of the box functionality.

The WaveLinx PRO Area Controller with IP66-Outdoor Rated Enclosure (WAC2-POE-OUT-EN) is the main component of the WaveLinx Pro wireless connected lighting (WCL) system. WaveLinx Pro eliminates the cost and complexity of typical wireless control system commissioning while providing a flexible and reconfigurable topology for on the fly space adjustments. The WaveLinx Pro system meets modern code and utility requirements, delivers energy and cost savings, while enabling buildings to become smart buildings. The WAC coordinates between the WaveLinx Pro smart and connected Mobile App and various WaveLinx Pro devices to create communications and a building ecosystem that provides out-of-the-box functionality and leverages Cooper Lighting Solutions patent pending automatic code commissioning features. Using standard-based wireless mesh compliant topology the WAC communicates to various WaveLinx Pro standard-based devices to provide area, lighting zone configuration, monitoring, and control. The WAC provides centralized coordination of multiple areas for partial ON/partial OFF scheduling, demand response (Trellix application required), lighting, occupancy and daylight settings and scene control. A single WAC can be connected to the building Local Area Network (LAN) to coordinate 49 user-defined and one construction area, or multiple WAC’s can exist on a building LAN to scale the system to hundreds of areas all accessible for setup, configuration and control through the WaveLinx Pro Mobile App.

The WaveLinx LITE Switchpack (RSP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The powerpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. The Switchpack integrates into the LITE system by forming a mesh networking while communicating with other LITE devices using Bluetooth protocol.

The remote PRO Outdoor Sensor Extender / Multiplier (RSWPD) housing incorporates a WaveLinx SWPD4 and SWPD5 wireless sensor, and is available in two distinct configurations: In the first configuration (RSWPD-WE), the device acts as a Wireless Extender. It is placed in a location where no WaveLinx enabled luminaire is present, thus providing a way for the wireless system to find a node from which to hop. This is an ideal configuration for when the WaveLinx WAC is too far from the first luminaire. In the second configuration (RSWPD-CM), the device acts as a Control Multiplier to distribute the commands from the WaveLinx system solution to multiple sensorless luminaires at once.

WaveLinx DALI panels integrate DALI-2 certified drivers (DT6 and DT8) and peripherals into the WaveLinx lighting control. Available in three sizes with up to six DALI-2 hubs, they feature factory pre-wiring, LED diagnostics, and mobile app commissioning. Ideal for small to large projects, WaveLinx DALI ensures flexibility, easy installation, and seamless integration with other technologies (like WaveLinx CAT and PRO) v WaveLinx Area Controller.

WaveLinx Wired is your wired solution for high complexity lighting control specifications, including energy management, architectural and DMX control within a single system. The WaveLinx Wired IL Area Controllers (ILS / ILM / ILL) feature modular design control panels with digital, 0-10V dimming, relay modules, bridge interface, and ethernet gateway.

Securely create, set up, and maintain lighting controls projects from mobile device. The mobile app provides Android™ and Apple® users a cloud connection to initiate new projects with up to 28 unique areas per project site. and automatic features like occupancy or vacancy mode, sensor sensitivity, daylight dimming calibration, etc. Additionally, the app’s connection to the cloud portal offers a secure method for site access to be transferred if the installer were not the owner / occupant.

The WaveLinx PRO Tilemount Sensor Kit Without Control Module (WTE) provides motion sensing, daylight dimming and real-time location data. The external plenum rated power supply, WLX-PS-SENSOR, can be used to power the WaveLinx Wireless Tilemount Sensor Kit and the low voltage power supply can power up to 16 sensors. Multiple pre-terminated plenum-rated cable options are also available to simplify the wiring.

The WaveLinx DALI Digital to Analog Converter (DAC-DC1 / DAC-DC2) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting Solutions two wire communications bus.

The IR Remote (ACC-P-RT) streamlines installers' or set-up technicians' processes when commissioning WaveLinx PRO-enabled or WaveLinx LITE-enabled sensors. The IR Remote allows the installer to communicate directly with the integrated sensor and send commands. Most commonly used commands for WaveLinx PRO include enabling/disabling pairing mode, reverse identification, enabling/disabling closed loop daylighting, adjusting daylight light levels and occupancy sensor sensitivity, resetting a sensor to default factory and performing more advanced functions such as assigning point guards for large zone applications. WaveLinx LITE functionality provides reverse identification functionality during provisioning.

The CAT Dimming Switchpack (RSP-C-010-Z1) is a lighting control device designed to control loads and power the CAT devices. Each unit consists of 120-277VAC 20A latching relay used to turn on/off LED and non-LED loads and a continuous 0-10V dimming control used to dim/raise fixtures' light level. The CAT Dimming Switchpack is equipped with two RJ 45 connectors to connect the unit to other CAT devices over standard CAT5 cables using WaveLinx CAT protocol. The unit also provides power to the CAT devices over the same CAT5 cables by transforming Class 1 line voltage (120/277 VAC) to Class 2 low voltage (24 VDC). The unit has an elongated chase nipple that allows it to be attached either directly through a 1/2" knockout into a junction box or inside an adjacent box for meeting specific local code requirements in ceiling plenums.

The WaveLinx PRO Industrial Standalone Sensor Kit (SWPD*-KIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous 0-10V dimming control of LED and non-LED loads. The intended use of the kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx Industrial integrated sensor. Alternatively, the WaveLinx Industrial Standalone Sensor Kit can provide occupancy inputs to the WaveLinx system when not directly connected to loads.

• Single integrated unit for all fixture control components • Push connector terminals for easy installation • Energy monitoring to qualify for the highest utility rebate levels and lifetime visibility to fixture health • Connector for Avi-on motion/ALS sensor (coming soon) • Innovative software only UL 924 Listing • UL Listed • Plenum rated (UL2043) • Outdoor antenna and Class 1 Dual channel (CCT) • Special order options available

• Provides line voltage On/Off switching and 0-10VDC dimming control • Works with ballasts or LED drivers • High and low modes fully adjustable from 0-10V • Time delay from 10 seconds to 60 minutes • Optional cut off delay • Adjustable ramp up and fade down times • High inrush stability zero crossing circuitry for realiable, long-life operation latching relay is durable for all load • UL773A and FCC

Limited Warranty: 5 yearsSize & Wattage:12 inch 24WColor Temperature: CCT adjustable Lumen output: 1300 lumen • Dimmable • Black/White finish • Day/night motion sensor integrated

Limited Warranty: 10 yearsWattage: 250W/340WColor Temperature: Standard 4000K & 5000KEfficacy: Up to 163 LPWLumen output: 40100 – 55500 lumen • 1-10V dimming • Optional accessories: Internal motion sensor

Limited Warranty: 5 yearsWattage: 30W/60WColor Temperature: CCT Adjustable Efficacy: Up to 120LPWLumen output: 3600 – 7200 lumen • 0-10V dimming • Optional accessories: Twist lock photocell/ Internal motion sensor • Standard DLC 5.1

Limited Warranty: 5 yearsWattage Selectable: 45W/70W/87W/130W 3CCT: 3000K/4000K/5000KEfficacy: Up to 120LPWLumen output: 5500-15800 lumen • 1-10V dimming • Optional accessories: Internal Motion sensor/ Twist lock photocell (Factory Install Only)

Limited Warranty: 5 yearsWattage: 2ft 15/20/25W or  • 4ft 24W/32W/40W(Wattage Selectable)Color Temperature: CCT Adjustable 30/40/50KEfficacy: Up to 130 LPWLumen output: 4550-5850  lumen • 0-10V dimming • Optional accessories: internal battery backup and external motion sensor

• AC input voltage range: 100-277V • Low power consumption and high reliability • 8-15s delay when turn off • Strong anti interference ability • Switch life is greater than 5000 cycles • Approved application patent • Suitable for dry and humid environment

Limited Warranty: 5 yearsWattage: 15W • Size:  6InchColor Temperature Adjustable: 5CCT 2700K/3000K/3500K/4000K/5000KEfficacy: Up to 67 LPWLumen output: 1000 lumen • Non dimmable • Suitable for wet location

Limited Warranty: 10 yearsWattage: 350WColor Temperature: Standard 4000K / 5000KEfficacy: Up to 138 LPWLumen output: 48,000 lumen • 1-10V dimming • Optional accessories: Internal photocell

Limited Warranty: 5 yearsWattage: 15WColor Temperature: 3000K/4000K/5000K/3CCTEfficacy: Up to 70 LPW • Oil bronze/white/black finish options • Photocell included

Limited Warranty: 5 yearsWattage: 135W / 200WColor Temperature: Standard 4000K / 5000KEfficacy: Up to 133 LPWLumen output: 18000lm – 26000lm • 1-10V dimming • Mounting option: Trunnion mount/Slipfitter mount • Optional accessories: Internal photocell

Limited Warranty: 5 yearsWattage: 15W5000K/25W3CCT(30K/40K/50K)Efficacy: Up to 140 LPWLumen output: 2100lm/2952lm • Dimmable • Photocell included

Limited Warranty: 5 yearsWattage: 10WColor Temperature: Standard 3000K/4000K/5000KEfficacy: Up to 100LPWLumen output: 990lm • Non-dimmable • Optional accessories: Internal Photocell

• 120-277 VAC, 50/60Hz • 360 degree, maximum coverage 60′ diameter from 40′ height • 0-10V • Operating temperature: -40 – 158 °F  • IP66 for PIR Lens

CELESTE™ Dim-to-Warm Linear Lighting delivers outstanding color rendering and dynamic performance for experiential environments like residences, restaurants and entertainment spaces. Advanced on-board circuitry eliminates the need for proprietary control systems in favor of a dimmer and power supply.

The LINE H mini ceiling light is made in three different sizes (mini / midi / maxi). LINE H can be hung in a meeting room, in a study above a desk, dining room or kitchen. LINE H mini has a light flux with 3120 lumens, warm white light, 145 ° beam and DALI dimmer. LINE H is available in white and black.

The suspended ceiling lamp LINE H midi is produced in three different sizes (mini / midi / maxi). LINE H can be hung in a meeting room, in a study above a desk, dining room or kitchen. LINE H midi has 4080 lumens of light flux, warm white light, 145 ° beam and DALI dimmer. LINE H is available in white and black.

The surface-mounted ceiling lamp LINE C mini is manufactured in three different sizes (mini / midi / maxi). LINE C can be inserted between wooden beams to give a playful style pinch to the ceiling. LINE C mini has a light flux with 3120 lumens, warm white light, 145 ° beam and DALI dimmer.

The suspended ceiling lamp LINE H maxi is manufactured in three different sizes (mini / midi / maxi). LINE H can be hung in a meeting room, in a study above a desk, dining room or kitchen. LINE H maxi has a light flux with 6120 lumens, warm white light, 145 ° beam and DALI dimmer. LINE H is available in white and black.

The LINE C midi ceiling light is manufactured in three different sizes (mini / midi / maxi). LINE C can be inserted between wooden beams to give a playful style pinch to the ceiling. LINE C midi has 4080 lumens of light flux, warm white light, 145 ° beam and DALI dimmer. LINE C is available in white and black.

Surface mounted ceiling light LINE C maxi is produced in three different sizes (mini / midi / maxi). LINE C can be inserted between wooden beams to give a playful style pinch to the ceiling. LINE C maxi has a light flux with 6120 lumens, warm white light, 145 ° beam and DALI dimmer. LINE C is available in white and black.

The gooseneck light is easy to install directly to a wall. The optional photocell provides reliable dusk-to-dawn operation and the multi-volt electronics allows for 120-277V operation.

Parking Lot Light 2nd Generation with Photocell

RS-232 Remote Control Circuit Breaker Panel Have as many RS-232 controlled circuits as you need in one power panel. You can mix RS-232 controlled motorized branch breakers and standard QO breakers together for a single power panel solution. The panelboard is big and roomy with lots of space to work (250% more room than a load center), which makes it the electricians’ favorite! Big as it is, the SCP still saves valuable wall space when compared to traditional relay-based control systems. The SCP comes with 200% neutrals to reduce neutral overheating caused by switch-mode power supplies. The SCP series also offers bolt-on breakers as an option to traditional plug-on models, and can control one, two or three pole breakers. Saves space compared to breaker panel + relay panel installations Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Easy set-up, no on-site commissioning or factory start-up required Simple jumper system sets RS-232 addressing Individual or zone control of circuits IP / serial integration with Building Management Systems Automatic load shedding feature standard Brownout / Power outage shut-down standard Branch current monitoring available SurgeX in-panel surge elimination modules – optional

Mission Revival Bellâ„¢ The Mission Revival Bell, or MRL, is an embodiment of the Mission Revival architectural style merged with the technology of LED sources and unsurpassed lighting control. This perfect combination of stylized beauty and optical power is available in two sizes, the MRL20, with a 20" diameter and MRL25, with a 25" diameter. Both are dark sky friendly and carry a BUG rating of U0. The MRL utilizes Sun Valley's PLEDâ„¢ high value optical system with field replaceable and field rotatable optics. The PLEDâ„¢ system can be configured in the larger unit for up to 220 watts providing up to 25,000 lumens, adequate for even parking lots; available with 10 photometric distributions plus house side shielding; for every application requirement.

The Trellix Outdoor Multisensor (OMS) delivers multimodal sensing for smart city lighting. Radar motion enables light on demand while sensors monitor daylight, noise, temperature, and pole tilt. Deploy with Trellix LMS for data insights or use standalone Bluetooth mode.

Take smart lighting to the next level with the UNB Network Lighting Control Telecell, the world’s most deployed wireless controller, proudly powered by Telensa. With over 2 million nodes installed globally and more than a decade of proven performance, this compact powerhouse is no larger than a standard photocell and is available for every luminaire type, including decorative fixtures. Engineered for reliability and scalability, the Telecell provides robust control and monitoring capabilities across expansive networks.

Delivering reliable, city-wide lighting control, the Ultra Narrow Band (UNB) Network Lighting Control Base Station from Trellix Infrastructure is built for scale and simplicity. Powered by Telensa, this base station enables dedicated wireless connectivity for thousands of connected lighting fixtures, ensuring seamless operations with minimal ongoing costs. Designed for rapid deployment and long-term performance, it’s the smart choice for future-ready infrastructure.

The PLANet® Lighting Management System (LMS) stands at the forefront of lighting control, boasting Telensa's 15+ years of global industry leadership and the successful installation of over two million telecells worldwide. This cutting-edge system utilizes a long-range, low-power radio network for seamless deployment, ensuring compatibility with leading network lighting controls through TALQ compliance. Designed to handle lighting operations of any scale—be it city, regional, or utility levels—PLANet LMS marries sophistication with user-friendly simplicity, offering a customizable and intuitive interface for enhanced functionality, tracking power consumption, energy optimization across public lighting networks, and reporting.

The XAS All-Selectable Area Site series delivers powerful, high-performance illumination with exceptional flexibility for a wide range of outdoor applications. Available in 180W and 300W configurations, it provides adjustable outputs up to 46,000 lumens, with selectable 3000K, 4000K, and 5000K color temperatures and Type III, IV, and V distributions. Each fixture features versatile mounting options and a twistlock photocell for streamlined installation and control. Designed for parking lots, roadways, and large outdoor spaces, the XAS series ensures reliable, efficient, and adaptable lighting performance.

Premium pre-assembled lighting contactor panel with astronomical timeclock, 2–24 poles, NEMA 1 or NEMA 3R, 120/277V. Plug-and-play. UL 508A certified.

Cost-effective pre-assembled lighting relay panel with 7-day timeclock, 3–12 poles, NEMA 1 or NEMA 3R. Budget-friendly alternative.

Complete DMX lighting control kits from simple 70-scene touchscreen wall stations to Pharos-based dynamic color-changing systems with app control.

The AMCP-SR10 is a versatile, field-customizable LED canopy light with selectable output from 3,000 to 12,000 lumens. It features CCT selection (3000K/4000K/5000K), a switchable built-in photocell, and a sensor-ready receptacle for PIR or microwave sensors. Designed for easy installation, the fixture is DLC Premium listed, IP65 rated, and available in white or bronze finishes.