160 manufacturers · 18,987 products

The GKO Gekko features a sleek wedge form factor in two housing sizes, with a wide range of CCT and lumen package options. Complete with sensor and battery options, the GKO produces zero uplight in any configuration for maximum versatility.

The Lumière Eon 303 Bollard luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is constructed from machined and extruded aluminum creating a sealed optical compartment. The LED bollard provides a zero uplight solution with a fixed head in 8.5W, 15.5W, or 30.6W configurations. The Eon Bollard luminaires are ideal for pathway or general ground mount illumination where greater lateral or forward throw illumination is needed. Photocell control options are available.

Delivered Lumens: Up to 2095lm CBCP: Up to 1436 CCT: 3000K CRI: 85 Power: 19W, 27W Input: 120-277 VAC, 50/60Hz ELV Dimming: 100-15% 0-10V Dimming: 100-30% Rated Life: 100000 Hours Construction: Die-cast aluminum Factory sealed LED Light Engine 20° forward throw illumination Photo/motion sensor compatible (sold separately) Built-in level for easy adjustment Suitable to install in all directions Driver concealed within the fixture Can be mounted on wall vertically or upside down

The Javalin Street Light is a powerful and reliable LED street lighting solution. From 30W to 200W output at 150lm/w, it is DLC certified and has a 5-year warranty. It is IP66 rated and IK10 impact resistant, and features auto disconnect for LED power supply maintenance. Smart lighting control is available via Photocell/Wireless Control System or Dimming. 8 standard NEMA lens optics are available, with 20 additional options upon request. It comes in a range of color temperatures from 3000K to 6500K.

The WaveLinx LITE Industrial Sidecar Sensor Kit (WIM-WH-SKIT) is an integral part of the WaveLinx Lite Connected Lighting System and offers 120-277VAC 6-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx LITE Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The WaveLinx PRO Industrial Sidecar Sensor Kit (SWPD*-WH-SKIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The remote PRO Outdoor Sensor Extender / Multiplier (RSWPD) housing incorporates a WaveLinx SWPD4 and SWPD5 wireless sensor, and is available in two distinct configurations: In the first configuration (RSWPD-WE), the device acts as a Wireless Extender. It is placed in a location where no WaveLinx enabled luminaire is present, thus providing a way for the wireless system to find a node from which to hop. This is an ideal configuration for when the WaveLinx WAC is too far from the first luminaire. In the second configuration (RSWPD-CM), the device acts as a Control Multiplier to distribute the commands from the WaveLinx system solution to multiple sensorless luminaires at once.

The WaveLinx PRO Industrial Standalone Sensor Kit (SWPD*-KIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous 0-10V dimming control of LED and non-LED loads. The intended use of the kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx Industrial integrated sensor. Alternatively, the WaveLinx Industrial Standalone Sensor Kit can provide occupancy inputs to the WaveLinx system when not directly connected to loads.

• 120-277 VAC, 50/60Hz • 360 degree, maximum coverage 60′ diameter from 40′ height • 0-10V • Operating temperature: -40 – 158 °F  • IP66 for PIR Lens

Take smart lighting to the next level with the UNB Network Lighting Control Telecell, the world’s most deployed wireless controller, proudly powered by Telensa. With over 2 million nodes installed globally and more than a decade of proven performance, this compact powerhouse is no larger than a standard photocell and is available for every luminaire type, including decorative fixtures. Engineered for reliability and scalability, the Telecell provides robust control and monitoring capabilities across expansive networks.

Delivering reliable, city-wide lighting control, the Ultra Narrow Band (UNB) Network Lighting Control Base Station from Trellix Infrastructure is built for scale and simplicity. Powered by Telensa, this base station enables dedicated wireless connectivity for thousands of connected lighting fixtures, ensuring seamless operations with minimal ongoing costs. Designed for rapid deployment and long-term performance, it’s the smart choice for future-ready infrastructure.