160 manufacturers · 18,987 products

The Momentary Toggle Switch is a low voltage contact closure switch used with Greengate Lighting Control Panels. When toggled up or down, the switch momentarily makes a contact closure to the lighting control panel, sending an “On” signal and has a center “Off” position. These switches have 0.050” (1.27mm) zinc-plated thick steel mounting straps for corrosion resistance and the combination slot/Phillips head mounting and terminal screws make for ease of installation.

Fifth Light’s Relay Panel provides scalable and modular On/Off control over a lighting panel as part of a DALI system for convenient control of multiple On/Off loads.

The Fifth Light Sensor Powerpack provides power to low voltage sensors and communicates occupancy data status to the Fifth Light system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.

The Multi-Sensor (OCS-D-P06 / OCS-D-P12) combines daylight sensing and occupancy detection into a single device. The Multi-Sensor communicates over the two wire communication bus and allows for all device settings and groups to be adjusted remotely.

UL924 Relay, 20 Amp SPST, 120-277 Vac Coil Input, 0-10 Vdc Dimmer Override

UL924 Relay, 10 Amp SPST, 120-277 Vac Coil Input, 0-10 Vdc Dimmer Override

The new SDC12 features 12 DMX channels, DIP switches to set a starting DMX channel, a master dimmer fader, on/off switch, 3pin and 5pin XLR output, and operates via an external 12VDC power supply (included) or a 9VDC battery (not included).

Wall Mounted Class 2 24VDC/96W Dimmer and Driver

Flex Graze HO SC™ fixtures provide the perfect fit wherever your world refuses to lie flat. Unlike most linear fixtures, which are strictly limited to bend only along one axis, Flex Graze HO SC can achieve both horizontal and vertical bends to precisely match complex profiles. Flex Graze HO SC fixtures also benefit from an industry-leading. ten year limited warranty to ensure complete confidence. A range of driver options are available to allow control via DMX, 0-10V or DALI. Alternatively, Flex Graze HO SC runs can also be integrated directly into mains-level dimming systems using our reverse/forward phase MLE dimmer drivers.

The SoliDrive Series of Constant Voltage Class 2 LED Drivers from Magnitude Lighting are UL Listed and feature a built-in junction box on both the input and output. These drivers are IP65 rated and are suitable for both indoor and outdoor installations. With universal input voltage ranging from 120 to 277VAC, the SoliDrive series of drivers are designed for commercial, industrial and residential applications. Our 0-10V dimming delivers smooth flicker-free linear dimming down to 1% with most LEDs and a wide variety of compatible dimmers. Class 2 electronic dimming Connect a compatible 0-10V dimmer and 100-277VAC to dim LED products down to 1% Low profile Super compact aluminum enclosure for easy placement Ready for the elements IP65 enclosure for outdoor use

The SoliDrive Series of Constant Voltage Class 2 LED Drivers from Magnitude Lighting are UL Listed and feature a built-in junction box on both the input and output. These drivers are IP65 rated and are suitable for both indoor and outdoor installations. With universal input voltage ranging from 120 to 277VAC, the SoliDrive series of drivers are designed for commercial, industrial and residential applications. Our 0-10V dimming delivers smooth flicker-free linear dimming down to 1% with most LEDs and a wide variety of compatible dimmers.Class 2 electronic dimming Connect a compatible 0-10V dimmer and 100-277VAC to dim LED products down to 1% Low profile Super compact aluminum enclosure for easy placement Ready for the elements IP65 enclosure for outdoor use

AL Fade 6 Prois a simple, fader based wall-mount DMX controller designed for single color or multi-color LED lighting products. It features a six-channel DMX output, six user-programmable presets (static color or moving sequence), and a master dimmer function. An IR remote control is included for wireless control up to 30’.Get in touch A simple slider interface makes for an easy to use wall mount DMX controller Set your level Control white or multicolor DMX fixtures and dim from 0-100% The Master Use the master fader to instantly override your programs

ILC provides a full line of occupancy sensors to meet your facilities requirements. Sensors are available with passive infra red detection or dual-technology sensors that combine infrared detection along with sonic detection for a more robust sensor. Sensors are available in many types including wall switches, ceiling mount, corner mount and surface mount.

The Intelligent Lighting Controls line voltage wall switch & 0-10 volt dimmer provides a stylish solution for spaces where manual dimming control is required. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection. For dimming adjustment, intuitive raise and lower buttons are present in addition to the on/off button. Five vertically stacked LEDs are provided to indicate the current dimming level. Configurable dimming parameters include High/Low Trims, Turn on Levels, and Curve Types. This dimmer also matches the ILC family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

The ILC Remote 20 (R20) and Remote 20 Dimming (R20D) relays are designed to be mounted at the power junction box or lighting fixture for direct control of the lighting load. Relays are controlled from the EVO panel using a standard CAT-5 cable connection to the R20 relay RJ-45 jack. The R20 series relay uses oversized contacts designed to handle LED inrush current. Tested at 16 Amps electronic driver that can commonly exceed 200% of running current of the R20D latching relay load. The R20D has galvanically isolated 0-10V dimming which allows for class 1 wiring of the low voltage dimming. Loss of power to the LLEVO panel will force dimmer output level to 100%.

The EVO Lite power pack operates one load of lighting or plug load. This power pack includes 12 configuration options, an on-board relay, and 0-10V dimming, integrated into one package for easy installation. The EVO Lite power pack is ideal for small offices or classrooms, made to meet energy code with daylight harvesting, plug load control, occupancy sensing, and vacancy sensing options. It has two RJ-45 ports: one to wire to switches and additional power packs, and another for sensors and additional power packs. This convenient and easy to install power pack can be used as a single device or combined with other EVO Lite power packs, for multi zone operation.

The LightSync G3 data line switch station is a modern, versatile and easy to use digital switch station. The G3 can pre-configured as a Multizone-Dimmer, Scene Switch, or a Non-Dim switch station. These will be configured for 1 to 7 buttons for standard load control, 1 to 6 buttons with dimming buttons for raise/lower or press and hold ramp-up/ramp-down operation that can be configured to dim all, or set of the dimmer outputs controlled. Buttons can be assigned to operate single relays, groups of relays, used for On or Off only operation, activating a relay preset or dimming scene. LED Status indicators for relays on, off, preset, or group state. MZD stations give the operator multi-zone and individual zone adjustment in a single station. LED status indicators for relays on, off, preset, or group state, when an individual zone is selected for dimming the LED will flash for that zone button. Button faces can be changed in the field for color or configuration, and the internal operation can be selected by placing the device in program mode locally, over the LightSync data bus using the diagnostic tool or from the LL-Pro programming software.

Intelligent Lighting Controls wireless power pack controllers switch on/off power to a connected lighting load as directed by wirelessly linked sensors, photocells, and wall controls. Additionally, the unit’s 0-10V dimming option greatly simplifies applications where dimming control from multiple switch locations is required. For applications where a hybrid wireless/wired architecture is desired, this wireless power pack can also be ordered with auxiliary low voltage connections.

The LightSync EVO Room Controller is a distributed lighting panel that simplifies expansion of a LLEVO or any LightLEEDer panel. The LSEVO-RC supports up to four R20D relays, two photo sensors, and two 6-button G3 switches. Easily connect R20D relays with CAT-5 to control lighting loads, 0-10V dimming, or receptacles. Programming can be easily modified using the ILC Pro Bluetooth app or LightLEEDer Pro software.

The LightLEEDer programmable lighting control relay panel is the key to a powerful, dependable, flexible and energy efficient lighting system. LightLEEDer panels come with our new Reliant40 relays which feature a superior four contact design—the first true 40Amp lighting relay. Reliant40 relays come in 1-, 2- and 3-pole configurations in a robust breaker-style body. LightLEEDer panels range in size from 4 to 64 relay capacity and are equipped with CAT-5 RJ45 connectors for LightSync data line devices and interconnecting panels. Panels include a keyboard and LCD screen, along with USB and TCP/IP connections for easy programming with our free LightLEEDer Pro Software. Add-on modules are available for connecting to BAS, theatrical, or security systems.

The INTELLIGENT LIGHTING CONTROLS family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage INTELLIGENT LIGHTING CONTROLS 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. INTELLIGENT LIGHTING CONTROLS products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in addition to an on/off button.

The LightLEEDer EVO Integrated 2 Relay Controller can operate up to two loads. This Controller includes the configuration options of an EVO with two on-board relays and 0-10V dimming integrated into one package for easy installation. The LLEVO-INT-2 relay Controller is ideal for a small office with two zones of lighting control with daylight harvesting or one lighting zone and a plug load. It has RJ-45 ports for local digital LightSync switches, occupancy sensors, and a photo sensor. This convenient and easy to install two relay Controller can be used as a stand-alone device or networked with other LightLEEDer panels.

The EVO Lite Ceiling Sensor is a low profile ceiling mount sensor designed to install in a standard commercial ceiling. The sensor is provided with dual-tech operation utilizing passive infrared and passive acoustic sensing. Configured with a few simple button presses for easy set-up and adjustment, this sensor supports occupancy and vacancy in a single device. The ELCS also supports traditional 18/3, 24VDC wiring, offering the contractor multiple wiring options, and allowing the ELCS to be used with the 24VDC occupancy sensor inputs of ILC’s LightLEEDer and AP3 systems, as well as most 3rd party systems and power packs.

The LightSync Occupancy Sensor 8 Input module is designed to power and receive signals from multiple sensors on each of its 8 independent inputs. Eliminate expensive power packs by simply direct- wiring the sensors into the inputs. This module mounts remotely in a location central to the sensors. Each independent input can control any relay(s), group(s), or preset(s) throughout the network.

The LightSync EVO Integrated 2 Room Controller has 2 isolated relays with 0-10V dimming. This controller integrates the control options of an EVO-RC with two on-board relays in one package for easy installation. Up to 3 LSEVO-INT-2-RC room cantrollers can be added to a LLEVO-INT-2 to extend its control into additional rooms or a small office with two zones of lighting control with daylight harvesting or one lighting zone and a plug load. It has RJ-45 ports for local digital LightSync switches, occupancy sensors, and a photo sensor. This convenient and easy to install two relay room controller is great for extending the controls of an LLEVO-INT-2 controller.

The Aurevo Motus is a discreet sensor that allows the monitoring/triggering of smart room devices based on user-defined programming.

The Boca Lighting and Controls SMART Dimmer DALI provides an interface with a dimming protocol of standard DALI show control.

The Boca Lighting and Controls SMART Dimmer DMX provides an interface with a DMX512 dimming protocol and uses Micro-Step technology for high-resolution dimming.

The Boca Lighting and Controls SMART Dimmer 0-10V provides an interface with a dimming protocol of 0-10 volts.

Remote 277V 300W Class II Magnetic Transformer. Up to 6x50W connections, dimmable with any incandescent dimmer. 15′ wire max. each.

Remote 120V 300W Class II Magnetic Transformer. Up to 6x50W connections, dimmable with any incandescent dimmer. 15′ wire max. each.

Trimless recessed or surface mount linear strip light with 7W/ft or 10W/ft. Frosted or prismatic lens for glare control. Touch switch and occupancy sensor switches available. Customizable length. Easy to install with friction spring clips. Compact sizing, suitable for lighting up small spaces, such as coves, wall slots, shelves & cabinets.

40 kHz Ultrasonic Presence Detector. Ceiling Mount. Square & Scalable. The US Quattro DCS is a digital (40kHz) ultrasonic technology presence detector that utilizes STEINEL’s stateof-the-art ultrasonic signal processing to provide superior stable volumetric omnidirectional detection. Ultrasonic is used for best practice in design and retrofit applications where the sensor will not have a clear line of sight view of the occupants in the desired coverage area. Lighting loads are controlled in relation to both presence detection and selectable ambient light levels with the integrated photocell to maximize energy savings. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.

40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Hallway COM1-24 is a low voltage (40 kHz) Ultrasonic Technology Occupancy Sensor that utilizes STEINEL’s state of the art ultrasonic signal processing to provide superior stable volumetric bidirectional detection. The unique linear bidirectional coverage pattern is engineered specifically for hallways and applications requiring a true linear volumetric pattern of detection. This is an ideal hallway sensor for design and retrofit applications. Operational choices of manual on or auto on with either momentary or maintained switch options. Included force off light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for pier to pier grouping achieving expanded detection zones with convenient control set up functions set at only one primary sensor for the entire group. Mounting options provide for 4” Square box, 4” Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available service and user wireless remotes provide simplified commissioning and occupant convenience. The Control PRO group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting (as in the COM2-24 versions) and optional 1-10 volt dimming and daylighting options (in the DIM-24 versions).

PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro DIM-24 is a low voltage passive infrared presence detector setting a new standard in lighting and 1-10 volt dimming control with minimal movement required for human presence detection. Provides for superior presence detection, energy savings and occupant convenience. Lighting is controlled in relation to both the presence of motion and ambient light levels. Operational choices of manual on or auto on with either momentary or maintained switch options. The Stay ‘ON’ time DIM before ‘OFF’ option provides basic illumination for the selected stay-‘ON’ time when ambient light falls below the selected brightness threshold that is set. This can be dimmed to 10% of maximum light intensity. As soon as a person is detected, the sensor switches either to 100% light intensity (constant-lighting controller ‘OFF’) or adjusts to the preselected brightness level (constant-lighting controller ‘ON’). When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brightness after the stay ‘ON’ time (1 min. - 30 min.) has expired or the daylight level exceeds the selected level of brightness. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available time saving wireless remote commissioning and set up tool and the user / occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).

PIR 360° Ceiling Mount Occupancy Sensor. The IS 3360-24 is part of the STEINEL family of German engineered, high performance commercial occupancy sensors. With 360° of uninterrupted coverage, the IS 3360-24 provides exceptional lighting control in a wide range of spaces. IS 3360-24 sensors are passive infrared and respond to heat radiated from human body motion. They mount on a ceiling and turn lighting ON either automatically with occupancy or manually using a low voltage wall switch and the manual on mode of a STEINEL power pack. After a period of time where no occupancy has been detected, the sensor switches lighting OFF.

High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD COM1-24 is a low voltage, high definition, passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. Features four digital pyroelectric detectors with a high performance lens system that creates a new global standard in detection with 4,800 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy saings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the detection reach without compromising sensitivity providing precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available time saving wireless remote commissioning set up tool and the user /occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).

"Outdoor Sensor with Dual Lampholders. Wall or Soffit. Low-rise residential exterior locations including entryways, carports, patios and balconies. The STEINEL FL 300 Outdoor Sensor with dual PAR Lampholders convenient configuration enhances security and energy savings for outdoor lighting. The FL 300 is passive infrared and esponds to moving persons or other heat-emitting objects (such as vehicles). Using a multi-segmented lens to view the controlled area, the sensors switch lighting ON pon occupancy and OFF after a period of time where no motion has been detected." Low-rise residential exterior locations including entryways, carports, patios and balconies

High Bay Extension Module ‐ (bulk polybag). The EM 1 Extender Module is used with STEINEL high bay occupancy sensors. It is recommended if the knockout at the end of the fixture is located greater than 1/2” from the bottom edge of the fixture.

Photo Sensor. Open Loop or Closed Loop Photo Sensor. Ceiling Mount. The PS, Photo Sensor, is a low voltage photocell used for controlling lighting circuits based on natural daylight. It works with the STEINEL DCS by signalling a change in light levels to the controller.

40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Quattro COM1-24 is a low voltage (40 kHz) Ultrasonic Technology Presence Detector that utilizes STEINEL’s state of the art ultrasonic signal processing to providing superior stable volumetric omnidirectional detection. Ultrasonic is used for best practice in design and retrofit applications where the sensor will not have a clear line of site view of the occupants in the desired coverage area. Operational choices of manual on or auto on with either momentary or maintained switch options. The force off light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for pier to pier grouping achieving expanded detection zones with convenient control set up functions set at only one primary sensor for the entire group. Mounting options provide for 4” Square box, 4” Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available service and user wireless remotes provide simplified commissioning and occupant convenience. The Control PRO group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting (as in the COM2-24 versions) and optional 1-10 volt dimming and daylighting options (in the DIM-24 versions).

High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD DIM-24 is a low voltage, high definition, passive infrared presence detector that is setting a new standard in lighting control. Featuring 1-10 volt dimming coupled with four pyroelectric detectors and a high performance lense system that creates 4,800 presence detection switching zones. Provides superior presence detection, energy savings and occupant convenience. Lighting is controlled in relation to both the presence of motion and ambient light levels. Operational choices of manual on or auto on with either momentary or maintained switch options. The Stay ‘ON’ time DIM before ‘OFF’ option provides basic illumination for the selected stay-’ON’ time when ambient light falls below the selected brightness threshold that is set. This can be dimmed to 10% of maximum light intensity. As soon as a person is detected, the sensor switches either to 100% light intensity (constant-lighting controller ‘OFF’) or adjusts to the preselected brightness level (constant-lighting controller ‘ON’). When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brighness after the stay ‘ON’ time (1 min. - 30 min.) has expired or the daylight level exceeds the selected level of brightness. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. Available time saving wireless remote commissioning set up tool and the user / occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).

40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Hallway DCS is a digital (40kHz) ultrasonic technology occupancy sensor that utilizes STEINEL’s stateof-the-art ultrasonic signal processing to provide superior stable volumetric bidirectional detection. The unique linear bidirectional coverage pattern is engineered specifically for hallways and applications requiring a true linear volumetric pattern of detection. This is an ideal hallway sensor for design and retrofit applications. Lighting loads are controlled in relation to both presence detection and selectable ambient light levels with the integrated photocell to maximize energy savings. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.

PIR Occupancy Sensor. Ceiling Mount Recessed. IP65. Required by planners and architects, made by STEINEL. The IR Quattro MICRO fulfills many wishes. Its small size and the low profile design make it perfect for applications where disturbing installations on the ceiling are to be avoided. The micro-precision lens measures just 15 x 15 mm. Its performance is nevertheless stunning. The 360° infrared presence detector detects 36 m². And the IP65 classification lets you install it in rooms that are subject to moisture. The IR Quattro MICRO – our smallest unit with huge potential.

PIR Occupancy Sensor. Ceiling Mount Recessed. Noticeably Inconspicuous. IR Quattro SLIM XS, the extra-slim presence detector in concealed-box format. Fits into any standard concealed box. Overall height of just 6 mm. High-precision 360° infrared senor with globally unique retina lens and 16 sq.m square presence detection zone (4 x 4 m). The extra slim IR Quattro SLIM XS presence detector virtually disappears in the wall or ceiling. Thanks to the new and practical concealed box format it forms a remarkably unobtrusive symbiosis with the office environment and can now be installed in any standard concealed box. In short: our slimmest presence detector would seem to be pretending it wasn't even there - and yet is absolutely present when it matters.

Photo Sensor. Open Loop or Closed Loop Photo Sensor. Ceiling Mount. The PS WL, Photo Sensor, is a low voltage photocell used for controlling lighting circuits based on natural daylight. It works with the STEINEL DCS by signalling a change in light levels to the controller. Designed for an outdoor wet location mounting that is safe for sunlight exposure or indoor location.

High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD COM1-WR is a line voltage, high definition, passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. Features four digital pyroelectric detectors with a high performance lens system that creates a new global standard in detection with 4,800 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box or Round 3.0 Mud-Ring. The available time saving wireless remote commissioning set up tool and the user /occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).

Power Pack. Manual/Auto (ON) Switching. 20 Amp. Relay. The TR 100 is a full featured power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. These are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. Each power pack contains a Mode Switch to select either manual ON or automatic ON operation. In manual ON mode, occupants operate a low voltage momentary switch to turn lights ON.

Dualtech PIR & 40 kHz Ultrasonic Presence Detector. Ceiling Mount. The DT Quattro DCS Dual Technology Presence Detector utilizes PIR and ultrasonic technologies to detect the presence or signature of a person in a space. The logic options for initial “ON” and “Maintained” state of occupancy gives design engineers and installation contractors the choice for proper control of lighting and building automation in difficult applications where detection options are needed in a single device. Lighting loads are controlled in relation to both presence detection and selectable ambient light levels with the integrated photocell to maximize energy savings. STEINEL’s world class PIR optics and ultrasonic signal processing provides unparalleled line of sight and volumetric presence detection. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.

Super Duty Power Pack. Manual/Auto (ON) Switching. 20 Amp. Relay. The TR 200 is a full-featured super duty lighting and plug load power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. The power packs switch the load(s) on and off in response to signals from control inputs. The TR 200 is a Class 2 Output Power Supply, suitable for parallel interconnection. Wires: All wires have UL Style 1659, 250°C, 600V insulation: • 18 AWG: Black for Line and White for Neutral • 12 AWG: two Red wires for normally closed dry contact from the 20A relay • 22 AWG: 5 low voltage conductors: Red (+24VDC), Black (-24 VDC), Blue (Control Input), Brown (Communication Link), Gray (Switch Input)

Power Pack. Manual/Auto (ON) Switching, Force ON/OFF, Isolated NO/NC. 20 Amp. Relay. The TR 150 is a full featured power pack with an isolated relay that provides power to STEINEL low voltage occupancy sensors and other control devides. They are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. Each power pack contains a Mode Switch to select either manual ON or automatic ON operation. In manual ON mode, occupants operate a low voltage momentary switch to turn lights ON.

Super Duty Power Pack. Manual/Auto (ON) Switching, Force ON/OFF, Isolated NO/NC. 20 Amp. Relay. The TR 250 is a full-featured super duty lighting and plug load power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. The power packs switch the load(s) on and off in response to signals from control inputs. The TR 250 contains force on and force off inputs for use with a building management system and an isolated normally open and normally closed relay for signaling a BMS, HVAC controls or other low voltage devices. The TR 250 is a Class 2 Output Power Supplies, suitable for parallel interconnection.

40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Hallway COM2-24 is a low voltage (40 kHz) Ultrasonic Technology Occupancy Sensor that utilizes STEINEL’s state of the art ultrasonic signal processing to provide superior stable volumetric bidirectional detection for independent control of both lighting and HVAC. Lighting is controlled in relation to both the presence of motion and ambient light levels. The HVAC output (isolated normally open and normally closed dry contacts) are signaled in relation to only the presence of motion. The unique linear bidirectional coverage pattern is engineered specifically for hallways and applications requiring a true volumetric bidirectional linear pattern of detection. This is an ideal hallway sensor for design and retrofit applications. Operational choices of manual on or auto on with either momentary or maintained switch options. Included “force off” light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for pier to pier grouping achieving expanded detection zones with control set up functions set at only one primary sensor for the entire group. Mounting options provide for 4” Square box, 4” Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available service and user wireless remotes provide simplified commissioning and occupant convenience. The Control PRO group of presence detectors are available in multiple presence detection technologies for the control of heating, ventilation and air-conditioning as well as lighting (as in the COM2-24 versions) and optional 1-10 volt dimming and daylighting options (in the DIM-24 versions).

High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD COM2-24 is a low voltage, high definition, passive infrared presence detector setting a new standard in lighting and HVAC control with minimal movement required for human presence detection. Lighting is controlled in relation to both the presence of motion and ambient light levels. The HVAC output (isolated normally open and normally closed dry contacts) are signaled in relation to only the presence of motion. Features four digital pyroelectric detectors with a high performance lens system that creates a new global standard in detection with 4,800 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available time saving wireless remote commissioning set up tool and the user /occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).

40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Hallway DIM-24 is a low voltage (40 kHz) Ultrasonic Technology Occupancy Sensor that utilizes STEINEL’s state of the art ultrasonic signal processing to provide superior stable volumetric bidirectional detection and provides a 1-10 volt dimming output to control ballasts or driver lighting loads. Lighting is controlled in relation to the presence of motion, the user selected dim level by remote or momentary switch and ambient light levels. As soon as occupancy is detected, the sensor goes to either the last selected electric light dim level (constant-lighting controller ‘OFF’) or adjusts to the last selected electric light + daylight brightness level (constant-lighting controller ‘ON’). The “force off” light level feature will turn lights off when sufficient daylight is present for additional energy savings. When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brightness (1.6 volts), after the Stay ‘ON’ time DIM before ‘OFF’ delay has expired the light turns off. The unique linear bidirectional coverage pattern is engineered specifically for hallways and applications requiring a true volumetric linear pattern of detection. This is an ideal hallway sensor for design and retrofit applications. Operational choices of auto on or manual on with a momentary or maintained switch input. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for pier to pier grouping achieving expanded detection zones with control set up functions set at only one primary sensor for the entire group. The available service and user wireless remotes provide simplified commissioning and occupant convenience. The Control PRO group of detectors are available in multiple presence detection technologies for the control of heating, ventilation and air-conditioning as well as lighting (as in the COM2-24 versions) and optional 1-10 volt dimming and daylighting options (in the DIM-24 versions).

40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Oneway DCS is a digital (40kHz) ultrasonic technology occpancy sensor that utilizes STEINEL’s state of the art ultrasonic signal processing to provide superior stable volumetric unidirectional detection. The unique linear unidirectional coverage pattern is engineered specifically for hallways and applications requiring a true volumetric linear pattern of detection. This is an ideal hallway sensor for design and retrofit applications where coverage is desired only in a single direction or small space applications where the sensor will not have a complete line of sight view of the occupied space. Lighting loads are controlled in relation to both presence detection and selectable ambient light levels with the integrated photocell to maximize energy savings. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.

PIR Ceiling Mount Corridor Occupancy Sensor. With a unique, specially designed detection lens, the IS 345-24 occupancy sensor is ideal for controlling lights in long corridors or aisleways. The sensor is part of the STEINEL family of German engineered, high performance commercial occupancy sensors. IS 345-24 sensors are passive infrared and respond to heat radiated from human body motion. They mount on a ceiling and turn lighting ON either automatically with occupancy or manually using a low voltage wall switch and the manual on mode of a STEINEL power pack. After a period of time where no occupancy has been detected, the sensor switches lighting OFF.

40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Oneway COM1-24 is a low voltage (40 kHz) Ultrasonic Technology Occupancy Sensor that utilizes STEINEL’s state of the art ultrasonic signal processing to providing superior stable volumetric unidirectional detection. The unique linear unidirectional coverage pattern is engineered specifically for hallways and applications requiring a true volumetric linear pattern of detection. This is an ideal hallway sensor for design and retrofit applications where coverage is desired only in a single direction or small space applications where the sensor will not have a complete line of site view of the occupied space. Operational choices of manual on or auto on with either momentary or maintained switch options. Included force off light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for pier to pier grouping achieving expanded detection zones with convenient control set up functions set at only one primary sensor for the entire group. Mounting options provide for 4” Square box, 4” Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available service and user wireless remotes provide simplified commissioning and occupant convenience. The Control PRO group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting (as in the COM2-24 versions) and optional 1-10 volt dimming and daylighting options (in the DIM-24 versions).

The IS 3360 DCS is part of the STEINEL family of high performance commercial motion detection sensors. With 360° of uninterrupted coverage, the IS 3360 DCS provides exceptional lighting control in a wide range of indoor and outdoor spaces and is recommeneded for use in applications such as sports arenas, stairwells, underground parking, parking garages, equipment rooms and warehouses. IS 3360 DCS sensors are passive infrared and respond to heat radiated from human body motion. They mount on a ceiling and turn lighting ON either automatically with occupancy or manually using a low voltage DCS wall switch. After a period of time where no occupancy has been detected, the sensor switches lighting OFF. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communications to the sensor by the 2 wire bus.

PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro COM2-24 is a low voltage passive infrared presence detector setting a new standard in lighting and HVAC control with minimal movement required for human presence detection. Lighting is controlled in relation to both the presence of motion and ambient light levels. The HVAC output (isolated normally open and normally closed dry contacts) are signaled in relation to only the presence of motion. It features a single pyroelectric detector with a high performance lens system creating 1,760 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available time saving wireless remote commissioning set up tool and the user /occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).