160 manufacturers · 18,987 products

Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Occupancy Sensor. The DT WLS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

"PIR Wall Switch Occupancy Sensor 2 Button The typical application is for bi-level switching in small office, conference, and break rooms. For best performance use this sensor in enclosed spaces no larger than 18’ x 15’. The IR WLS 2 is a line voltage, two relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching." The typical application is for bi-level switching in small office, conference, and break rooms. For best performance use this sensor in enclosed spaces no larger than 18’ x 15’.

PIR Wall Switch Occupancy Sensor. 1 Button. The IR WLS 1 is a line voltage, single relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold OFF photocell daylight option will keep the lighting load off if the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Vacancy Sensor. 2 Button. The DT VS 2 is a line voltage, two relay, Dual Technology (PIR & ultrasonic) wall switch vacancy (manual ON) sensor intended to control bi-level lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Occupancy Sensor. 1 Button. The DT WLS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.

Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Vacancy Sensor. The DT VS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch vacancy (manual ON) sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Occupancy Sensor. 1 Button. The DT WLS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.

Power Pack. Auto (ON) Switching. 20 Amp. Relay. The TR 100-A is a full featured power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. They are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. All wires have UL Style 1659, 250°C, 600V insulation: 18 AWG: Black for Line and White for Neutral 12 AWG: two Red wires for normally open dry contact from the 20A relay 22 AWG: 4 low voltage conductors: Red (+24VDC), Black (-24VDC), Blue (Control Input), Gray (Momentary Switch Input)

Power Pack. Auto (ON) Switching, Force ON/OFF, Isolated NO/NC. 20 Amp. Relay. The TR 150-A is a full featured power pack with an isolated relay that provides power to STEINEL low voltage occupancy sensors and other control devices. They are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. All wires have UL Style 1659, 250°C, 600V insulation: 18 AWG: Black for Line and White for Neutral 12 AWG: two Red wires for normally open dry contact from the 20A relay 22 AWG: 9 low voltage conductors: Red (+24VDC), Black (-24 VDC), Blue (Control Input), Orange ( Force On), Brown (Force Off), Gray (Momentary Switch Input), Yellow (Isolated Relay Common), Yellow with Red Stripes (Normally Open Isolated Relay), Yellow with Black Stripes (Normally Closed Isolated Relay)

Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Vacancy Sensor. The DT VS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch vacancy (manual ON) sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Vacancy Sensor. 1 Button. The DT VS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) vacancy (manual ON) sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to maintain the load ON with either or both technologies. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

PIR Wall Switch Vacancy Sensor. 1 Button. The IR VS 1 is a line voltage, single relay, Passive Infrared (PIR) wall switch vacancy (manual ON) sensor intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming.Wall Switch Occupancy Sensor. The DT WLS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Occupancy Sensor. 2 Button. The typical application is for bi-level switching in small offices, conference rooms or break rooms. For best performance use this sensor in enclosed spaces no larger than 20’ x 16’. The DT WLS 2 is a line voltage, two relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold OFF photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

PIR. 0-10 Volt Dimming. Wall Switch Occupancy Sensor. The IR WLS DIM is a line voltage, Passive Infrared (PIR) wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. Control options via Smart Remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

IP65 Wet Location. PIR High Bay 360° Sensor. (Individual). The HBS 300-WL sensor provides effective lighting control in areas requiring a 360 degree occupancy detection pattern. Best practice for high/low bay open areas requiring IP65 wet location rating. Ideal for warehouses and general damp or wet unconditioned storage areas. The sensor performs at a wide range of mounting heights, up to 45 ft. The EM1 Extendor Module mounts directly to a lighting fixture or junction box. With three highly sensitive pyroelectric detectors and a multi-segmented lens, the HBS 300-WL is able to achieve 1416 switching zones with best in class radial and tangential detection..

PIR Wall Switch Occupancy Sensor. 1 Button. The IR WLS 1 is a line voltage, single relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold OFF photocell daylight option will keep the lighting load off if the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.

IP65 Wet Location. PIR High Bay Aisle Sensors. (Individual). The HBS 200-WL sensor provides effective lighting control in damp or wet locations. Coverage specifically designed for aisle occupancy detection. Can be used in a wide range of applications that require an IP65 rating. Best practice for unconditioned storage areas, warehouse aisles or any spaces requiring linear detection pattern. The sensor performs at a wide range of mounting heights, up to 45 feet. It mounts directly to a lighting fixture or junction box. The EM1 Extender Module is recommended if the knockout at the end of a fixture is located greater than 1/2" from the bottom edge of the fixture.

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Occupancy Sensor. 1 Button. The DT WLS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.

PIR. 0-10 Volt Dimming. Wall Switch Vacancy Sensor. The IR VS DIM is a line voltage, Passive Infrared (PIR) wall switch vacancy (manual ON) sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. Control options via Smart Remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

PIR Wall Switch Occupancy Sensor. 1 Button. The IR WLS 1 is a line voltage, single relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold OFF photocell daylight option will keep the lighting load off if the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.

PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro COM1-WR is a line voltage passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. Features a single pyroelectric detector with a high performance lens system creating 1,760 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box or Round 3.0 Mud-Ring. The available time saving wireless remote commissioning set up tool and the user /occupant wireless remote provides additional convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Vacancy Sensor. 1 Button. The DT VS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) vacancy (manual ON) sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to maintain the load ON with either or both technologies. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

PIR Wall Switch Occupancy Sensor. 2 Button. The typical application is for bi-level switching in small office, conference, and break rooms. For best performance use this sensor in enclosed spaces no larger than 18’ x 15’. The IR WLS 2 is a line voltage, two relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

6” Wide Curved Wraparound Luminaire with Motion Sensor

6” Wide Curved Impact Resistant Wraparound with Motion Sensor and Security Options

Alset® LED wallpacks can replace HID lighting up to 400W MH or HPS for safety, security and general illumination. With both forward throw and downlight they provide excellent illumination and uniformity. Photocell option available. Uses include office buildings, shopping centers, restaurants, schools, warehouses, parking garages and other commercial applications.

The Brock 4.3 Series Outdoor Wall LED is a modern and stylish light perfect for any outdoor space. It features 5 CCT selectable via toggle switch, a photocell sensor for auto on and off, and comes in standard finishes such as white, black, and oil rubbed bronze, or custom finishes upon request. This light has the option for either direct or direct/indirect illumination.

The Javalin Street Light is a powerful and reliable LED street lighting solution. From 30W to 200W output at 150lm/w, it is DLC certified and has a 5-year warranty. It is IP66 rated and IK10 impact resistant, and features auto disconnect for LED power supply maintenance. Smart lighting control is available via Photocell/Wireless Control System or Dimming. 8 standard NEMA lens optics are available, with 20 additional options upon request. It comes in a range of color temperatures from 3000K to 6500K.

The Brock 3.5 Series Outdoor Wall LED is a modern and stylish light perfect for any outdoor space. It features 5 CCT selectable via toggle switch, a photocell sensor for auto on and off, and comes in standard finishes such as white, black, and oil rubbed bronze, or custom finishes upon request. This light has the option for either direct or direct/indirect illumination.

Round aluminum LED suspension lamp with a highly uniform opal white PMMA diffuser. It allows multiple configurations with a single connection. Finishes: textured matte white, textured matte black and natural oak. Direct light with a soft indirect light effect. Available in three sizes. Dimmer.

Round aluminum LED ceiling lamp with a highly uniform opal white PMMA diffuser. It allows multiple configurations with a single connection. Finishes: textured matte white, textured matte black and natural oak. Direct light with a soft indirect light effect. Available in three sizes. Dimmer.

Aluminium ceiling lamp shaped like a circular ring. For its light source, it uses LED floodlight modules that provide uniform lighting. Finishes: matte white, matte bronze, matte black, natural oak wood or walnut. Available in three sizes. Dimmer.

SENSORWORX line voltage wide view and hallway occupancy sensors are self-contained lighting control solutions that mount to the wall, corner, or ceiling. Using an adjustable angled bracket and multi-position chase nipple, these sensors reduce contractor installation time and provide a secure and clean finished appearance. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally, these SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion will be limited.

SENSORWORX line voltage photocell and daylight harvesting sensors provide a compact control solution without requiring a powerpack. Basic on/off units are capable of directly switching lights off when ambient levels are high enough that desired overall light levels will be still be maintained. Lights will be switched back on once ambient level falls below the desired setpoint. Units with the daylight harvesting (dimming) option track a space’s overall illumination and dim connected lighting to achieve energy savings. During times of high daylight contribution to a space, controlled artificial lighting will be gradually dimmed to a minimum dimmed level. During times of no or low daylight contribution, controlled artificial lighting will increase back up to its maximum level. The sensor can also be configured to switch lighting off completely in maintained high daylight conditions. Additional configurable parameters include high & low trim levels and fade rates. All photocells provide the option of selecting the ambient light threshold (e.g., setpoint) from a range of preset values or running an auto-selection mode where the unit will determine the setpoint based on the measured amount of light it is controlling.

The SENSORWORX line voltage wall switch & 0-10 volt dimmer provides a stylish solution for spaces where manual dimming control is required. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection. For dimming adjustment, intuitive raise and lower buttons are present in addition to the on/off button. Five vertically stacked LEDs are provided to indicate the current dimming level. Configurable dimming parameters include High/Low Trims, Turn on Levels, and Curve Types. This dimmer also matches the SENSORWORX family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

​The SENSORWORX wireless wall switch load controller links to remote occupancy sensors and switches without low voltage wiring in order to provide automatic lighting control. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection and never requires a minimum load. This switch also matches the SENSORWORX family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

The SENSORWORX family of line voltage ceiling mount occupancy sensors provides a compact control solution capable of switching lighting loads without requiring a powerpack. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions.

The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple yet cost-effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowed wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in a addition to an on/off button.

The SENSORWORX family of wall switch occupancy sensors provides a simple yet cost-effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.

The LSLR is a recessed fixture with a unique regressed diffuser that is made to resemble a sky light. Diffuser provides glare control and high levels of efficiency, while maintaining a natural sky light look and feel. 0-10V dimming standard, with additional driver options including DALI and Lutron EcoSystem. Integrates with wired and wireless building lighting control systems.

Two side edge lighted vanity mirror offered in multiple sizes, color temperatures, and light outputs. Light provides an indirect backglow. The mirror dims with an electronic low voltage dimmer. An optional anti-fog demister is also available.

Two side inset lighted vanity mirror offered in multiple sizes, color temperatures, and light outputs. Choose between a direct or both a direct & indirect light source. The fixture dims with an electronic low voltage dimmer. An optional anti-fog demister is also available.

Full frame edge lighted vanity mirror offered in multiple sizes, color temperatures, and light outputs. Light provides an indirect backglow. The mirror dimmable with an electronic low voltage dimmer. An optional anti-fog demister is also available.

The WaveLinx PRO Contact Closure Input Module (CCI-P-V) provides analog devices with an interface and network addressability. It offers two modes : mode one has four inputs for momentary and sustained contact inputs . In the second mode the first channel on the device provides an input to the occupancy sensor. The CCI module communicates with other devices on the network and can easily be managed via the WaveLinx mobile app.

Easily adjustable compact digital ceiling sensor that excels due to its ability to utilize an industry leading mobile app to provision and troubleshoot. The mobile app allows contractors and technicians cut onsite time through an intuitive interface that provides active sensor feedback and provisioning flexibility. The device’s slim form factor provides a sleek aesthetic that blend into the ceiling maintaining the spaces visually appeal.

The WaveLinx Wired BMS Pro 2 BACnet Gateway (FPA-W44-1757) products are feature-rich, high performance protocol translators which allows data exchange between Cooper's (Greengate, WaveLinx Wired and Fifth Light) lighting control systems and the Building Automation Systems and other third party systems using standard based communication protocols. BMS Pro 2 converts Cooper’s Greengate, iLumin and Fifth Light lighting control systems’ protocols to BACnet/IP, BACnet MS/TP, Modbus TCP/IP, Modbus RTU.

The WaveLinx LITE Contact Closure Input is a WaveLinx LITE device that provides the ability to take inputs from other devices, like fire alarm panels, keyed switches, or other devices, incorporating momentary or maintain actions to allow the system to respond to demand response, alert mode, after hours occupancy or a sensor input.

The WaveLinx PRO Universal Voltage Dimming Switchpack (RSP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The RSP-P consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. This powerpack is an integral part of the WaveLinx system. It communicates with other PRO devices and WaveLinx Area Controller using PRO protocol, a 2.4GHz wireless mesh network based on IEEE 802.15.4 standard.

The OEM WaveLinx LITE Components are designed for OEM manufacturers who want to integrate WaveLinx LITE enabled components into their fixtures for applications requiring a WaveLinx LITE system. The solution is designed to provide OEM manufacturers the ability to build a seamless WaveLinx LITE compatible fixture that works out of the box. Available components include the WaveLinx LITE direct connect sensor, WaveLinx LITE Integrated Sensor, the control module and associated wire harness, wireless node, industrial/outdoor sensors, industrial/outdoor sockets, industrial/outdoor 0-10v control module converter.

The WaveLinx Wired Sensor Powerpack (FLT-SP) provides power to low voltage sensors and communicates occupancy data status to the WaveLinx Wired system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.

The PRO Tilemount Sensor Kit (WTA) provides PIR occupancy, daylight dimming and control for connected downlight luminaires or other luminaires that do not support the WaveLinx Integrated Sensor. The Tilemount Sensor Kit provides 0-10V dimming control of LED and non LED loads for 120-277V 3 amp luminaires.

The WaveLinx LITE Industrial Sidecar Sensor Kit (WIM-WH-SKIT) is an integral part of the WaveLinx Lite Connected Lighting System and offers 120-277VAC 6-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx LITE Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The WaveLinx PRO Industrial Sidecar Sensor Kit (SWPD*-WH-SKIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The LITE Wireless Tilemount Sensor Kit (WTK) is an accessory to the WaveLinx LITE (WLC) system which may be used with out-of-the-box functionality or commissioned via the WaveLinx LITE mobile application. The wireless tilemount sensor kit is typically used to provide occupancy sensing and daylight dimming for luminaries that cannot include integrated occupancy and daylight sensors.

WaveLinx PRO Integrated Components are available to allow luminaire manufacturers to incorporate WaveLinx Integrated Sensors into their lineup to support WaveLinx project sales. WaveLinx integrated sensor luminaires are an integral of the WaveLinx Wireless System providing motion detection, daylighting, and wireless radio with each having out of the box functionality.

The WaveLinx LITE Switchpack (RSP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The powerpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. The Switchpack integrates into the LITE system by forming a mesh networking while communicating with other LITE devices using Bluetooth protocol.

The remote PRO Outdoor Sensor Extender / Multiplier (RSWPD) housing incorporates a WaveLinx SWPD4 and SWPD5 wireless sensor, and is available in two distinct configurations: In the first configuration (RSWPD-WE), the device acts as a Wireless Extender. It is placed in a location where no WaveLinx enabled luminaire is present, thus providing a way for the wireless system to find a node from which to hop. This is an ideal configuration for when the WaveLinx WAC is too far from the first luminaire. In the second configuration (RSWPD-CM), the device acts as a Control Multiplier to distribute the commands from the WaveLinx system solution to multiple sensorless luminaires at once.

WaveLinx DALI panels integrate DALI-2 certified drivers (DT6 and DT8) and peripherals into the WaveLinx lighting control. Available in three sizes with up to six DALI-2 hubs, they feature factory pre-wiring, LED diagnostics, and mobile app commissioning. Ideal for small to large projects, WaveLinx DALI ensures flexibility, easy installation, and seamless integration with other technologies (like WaveLinx CAT and PRO) v WaveLinx Area Controller.

The WaveLinx PRO Tilemount Sensor Kit Without Control Module (WTE) provides motion sensing, daylight dimming and real-time location data. The external plenum rated power supply, WLX-PS-SENSOR, can be used to power the WaveLinx Wireless Tilemount Sensor Kit and the low voltage power supply can power up to 16 sensors. Multiple pre-terminated plenum-rated cable options are also available to simplify the wiring.