160 manufacturers · 18,987 products

The CAT Dimming Switchpack (RSP-C-010-Z1) is a lighting control device designed to control loads and power the CAT devices. Each unit consists of 120-277VAC 20A latching relay used to turn on/off LED and non-LED loads and a continuous 0-10V dimming control used to dim/raise fixtures' light level. The CAT Dimming Switchpack is equipped with two RJ 45 connectors to connect the unit to other CAT devices over standard CAT5 cables using WaveLinx CAT protocol. The unit also provides power to the CAT devices over the same CAT5 cables by transforming Class 1 line voltage (120/277 VAC) to Class 2 low voltage (24 VDC). The unit has an elongated chase nipple that allows it to be attached either directly through a 1/2" knockout into a junction box or inside an adjacent box for meeting specific local code requirements in ceiling plenums.

The WaveLinx PRO Industrial Standalone Sensor Kit (SWPD*-KIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous 0-10V dimming control of LED and non-LED loads. The intended use of the kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx Industrial integrated sensor. Alternatively, the WaveLinx Industrial Standalone Sensor Kit can provide occupancy inputs to the WaveLinx system when not directly connected to loads.

• AC input voltage range: 100-277V • Low power consumption and high reliability • 8-15s delay when turn off • Strong anti interference ability • Switch life is greater than 5000 cycles • Approved application patent • Suitable for dry and humid environment

• 120-277 VAC, 50/60Hz • 360 degree, maximum coverage 60′ diameter from 40′ height • 0-10V • Operating temperature: -40 – 158 °F  • IP66 for PIR Lens

The gooseneck light is easy to install directly to a wall. The optional photocell provides reliable dusk-to-dawn operation and the multi-volt electronics allows for 120-277V operation.

Parking Lot Light 2nd Generation with Photocell

Mission Revival Bellâ„¢ The Mission Revival Bell, or MRL, is an embodiment of the Mission Revival architectural style merged with the technology of LED sources and unsurpassed lighting control. This perfect combination of stylized beauty and optical power is available in two sizes, the MRL20, with a 20" diameter and MRL25, with a 25" diameter. Both are dark sky friendly and carry a BUG rating of U0. The MRL utilizes Sun Valley's PLEDâ„¢ high value optical system with field replaceable and field rotatable optics. The PLEDâ„¢ system can be configured in the larger unit for up to 220 watts providing up to 25,000 lumens, adequate for even parking lots; available with 10 photometric distributions plus house side shielding; for every application requirement.

The Mission Revival Bell, or MRL, is an embodiment of the Mission Revival architectural style merged with the technology of LED sources and unsurpassed lighting control. This perfect combination of stylized beauty and optical power is available in two sizes, the MRL20, with a 20″ diameter and MRL25, with a 25″ diameter. Both are dark sky friendly and carry a BUG rating of U0. The MRL utilizes Sun Valley’s PLED™ high value optical system with field replaceable and field rotatable optics. The PLED™ system can be configured in the larger unit for up to 220 watts providing up to 25,000 lumens, adequate for even parking lots; available with 10 photometric distributions plus house side shielding; for every application requirement. Mission Revival architecture frequently exhibits arched windows and distinctive shaped parapets, which is echoed in the corresponding arms that accompany this offering: the XMI, which has the mission style shaped parapet lines and the XCR which uses the arch curvature. Pantented “Tru-level” pendant luminaire coupling system. “Instaleze” ballast tray, wiring, and/or access features for ease of installation and maintenance.

Take smart lighting to the next level with the UNB Network Lighting Control Telecell, the world’s most deployed wireless controller, proudly powered by Telensa. With over 2 million nodes installed globally and more than a decade of proven performance, this compact powerhouse is no larger than a standard photocell and is available for every luminaire type, including decorative fixtures. Engineered for reliability and scalability, the Telecell provides robust control and monitoring capabilities across expansive networks.

Delivering reliable, city-wide lighting control, the Ultra Narrow Band (UNB) Network Lighting Control Base Station from Trellix Infrastructure is built for scale and simplicity. Powered by Telensa, this base station enables dedicated wireless connectivity for thousands of connected lighting fixtures, ensuring seamless operations with minimal ongoing costs. Designed for rapid deployment and long-term performance, it’s the smart choice for future-ready infrastructure.

Premium pre-assembled lighting contactor panel with astronomical timeclock, 2–24 poles, NEMA 1 or NEMA 3R, 120/277V. Plug-and-play. UL 508A certified.

Cost-effective pre-assembled lighting relay panel with 7-day timeclock, 3–12 poles, NEMA 1 or NEMA 3R. Budget-friendly alternative.

The AMCP-SR10 is a versatile, field-customizable LED canopy light with selectable output from 3,000 to 12,000 lumens. It features CCT selection (3000K/4000K/5000K), a switchable built-in photocell, and a sensor-ready receptacle for PIR or microwave sensors. Designed for easy installation, the fixture is DLC Premium listed, IP65 rated, and available in white or bronze finishes.