160 manufacturers · 18,987 products

impress™ DMX offers the same sophistication and elegance of our Collageimpress™ architectural controls using DMX512 communication for simple integration into any DMX-based lighting system. All of our stations offer a state- of-the-art capacitive touch interface for architectural lighting control. impress™ DMX provides control for up to 120 single or multi-channel zones across 512 DMX outputs, 18 presets, and includes support for color LEDs with virtual intensity control for RGB fixtures. This system is ideal for restaurants, themed-retail, conference rooms, houses of worship, convention centers, and theater house light control.

The E-FlexTM lighting and energy control system is a relay based controller for switched and 0-10V lighting control for direct connection to dimming ballasts and LED drivers. The system is flexible enough to act as a standalone room controller, or to accept DMX512 directly to easily integrate alongside DMX-based architectural lighting. It is available with four or eight output circuits and four input banks to accept occupancy, daylight, contact closure and CapT wallstations. It is an ideal solution for standalone applications – classrooms, conference rooms, offices, or to simply light public spaces such as stairwells, hallways, or lobbies.

The Passive Infrared Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. ONW-P-1001-MV is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The MicroSet Dual Technology Line Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. MicroSet self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period. The sensor is available in both single and dual load control.

The Passive Infrared Single Level Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. The VNW-P-1001-MV uses Passive Infrared (PIR) sensor technology to monitor a room for occupancy and deliver maximum energy savings. The lights are turned ON by pressing the universally recognized light icon pushbutton. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The ONW-D Dual Technology RR7 Compatible Occupancy Sensing Wall Switch is a motion sensing lighting control that is used or energy savings and convenience. This low voltage unit interfaces directly with GE RR7 Relay Systems. The ONW-D-1001-RR7 combines Ultrasonic and Passive Infrared (PIR) sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The (ONW-P-1001-RR7) Passive Infrared RR7 Compatible Occupancy Sensing Wall Switch is a motion sensing lighting control that is used for energy savings and convenience. This low voltage unit interfaces directly with GE RR7 Relay Systems. The ONW-P-1001-RR7 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. The sensor includes self adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings. HVAC mode allows the load connected to the Form C BAS relay to remain ON when the lights are turned OFF manually.

The Dual Technology Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. The ONW-D-1001-DMV-N combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

Dual Relay Switchpacks provide 24 VDC operating voltage to all low voltage, 24 VDC, Greengate occupancy sensors and day lighting controllers. These powerpacks can be used where two circuits need to be controlled at the same point. A single switchpack can provide power for up to five sensors. Up to ten switchpacks can be connected to one sensor for control of multiple circuits. Isolated contacts may also be used to control HVAC, contactors, motors, etc.

The Partitioning IR Transmitter and Receiver (IRTR) is a system accessory commonly used for the WaveLinx Wired Lighting Control System. It is used to sense the presence or absence of partitions such that lighting functions change to accommodate the appropriate size space. Requires connection to a UIG-2-NA.

The network cable is used to interconnect the Greengate network lighting control panels. The typical data transmission cabling is GG9841 which contains 24 AWG single twisted shielded pair. When adding panels in the middle of an existing network, GG9842 cabling allows daisy-chain integrity by providing two twisted pairs of 24 AWG and shielded wire, allowing for an out and return pair within the same cable. Non-plenum and plenum rated versions are available.

The Isolated RS-485 Repeater is designed to allow the expansion of the network wire beyond the specified 4,000 feet limitation as well as the approximate 32-panel limitation. It provides the ability to amplify the network signal through an additional 4,000 feet of network wire as well as an additional 32 panels. It also allows the electrical isolation of one side of the network from another assisting in minimizing the potential for network disruptions from ground faults present on the lighting control low voltage wiring between network ports.

The Passive Infrared Low Voltage Occupancy Sensing Wall/Corner sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. Manual On feature for use with 1 or 2 momentary switches controlling 1 or more Switchpacks.

The Lighting Relay Module is available in 347 VAC input voltage. The Lighting Relay Module (LRM) is designed to force all relays in a lighting control panel to an ON or Closed state regardless of the control panel programmed relay status. This allows the closure of relays during loss of normal (grid) power to allow an alternate power source to drive the lighting loads.

The Passive Infrared Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The OSW-U-0721-MV is a self contained, energy saving, motion-sensing lighting control which replaces a conventional wall switch and utilizes ultrasonic technology to detect room motion. The sensor produces a low-intensity, inaudible sound to detect occupancy in a room. Changes in the sensor’s acoustic wave caused by motion, such as walking into a room, reaching for a telephone or swiveling in a chair, will cause the lights to turn ON. The sensor does not respond to audible sound. Wall switches are ideal for smaller spaces where you will not have obstructions of line-of-sight due to switch location, room orientation or furniture placement.

The External Power Supply is a system accessory for the Greengate Lighting Control System. It is used to power user interfaces and other accessories when additional power is needed.

The OSW-P-1001-MV Passive Infrared Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. In Automatic On Mode, the lights turn ON when a person enters the room. In Manual On Mode, the lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as one of the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with Incandescent, LED, Fluorescent, CFL, MLV, ELV or 1/2 HP motor load.

The 37 pin receptacle kit is used with the Greengate Patient Control Station to provide an interface to the Greengate Lighting control panel, Nurse Call System and the entertainment System. The 37 Pin receptacle kit includes: Three pigtails, Stainless steel wall plate, Receptacle/dummy plug, Class 2 low voltage wiring.

The Dual Technology Low Voltage Occupancy Sensing Wall Switch is a motion sensing lighting control that is used for energy savings and convenience and utilizes an isolated form-C relay that integrates directly with lighting control, building, and HVAC systems. The ONW-D-1001-SP combines Ultrasonic and Passive Infrared (PIR) sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings. HVAC mode allows the load connected to the Form C BAS relay to remain ON when the lights are turned OFF manually.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. The ONW-D-1001-MV-N combines Ultrasonic and Passive Infrared (PIR) sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The passive infrared Extreme Temperature Sensor provides consistent, stable coverage where extreme heat, cold or humidity must be accommodated, and where there are wide fluctuations in temperature. Temperature compensating circuitry stabilizes sensitivity at temperatures –40°F to 125°F (-40°C to 52°C). Ambient light control circuit to avoid False ON/OFF from brief changes in background light. Lighting sweep function with selectable DIP Switch prevents unnecessary “lights ON” following power sweeps in facilities with computer control systems

The MicroSet Ultrasonic Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The ultrasonic sensor uses the Doppler principle. It produces a low intensity, inaudible sound and detects changes in sound waves caused by motion, such as walking into the room, reaching for the telephone, or turning in a chair. They are volumetric in nature and therefore not line-of-sight dependent. Since they fill the space with these sound waves, they are excellent in bathrooms with stalls, enclosed hallways, or other oddly shaped rooms. In addition, they are much more sensitive to smaller motions. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Outdoor Contact Input Photosensor is a system accessory for Greengate lighting control systems. It allows control of lighting levels based on how much natural light is present and is intended for outdoor use. This system accessory is used in conjunction with a lighting control panel to switch circuits ON or OFF based on outdoor light levels. The Outdoor Contact Input Photosensor connects to the control panel low voltage switch inputs. The photosensor constantly monitors the level of sunlight and provides a signal to the lighting control panel when the light level crosses the switching threshold.

The Analog Photosensor is a system accessory for Greengate lighting control systems. It allows control of lighting levels based on how much natural light is present. Photosensors use a lens to gather light energy and provide an electrical signal to a controller device that is proportional to the measured light level. The sensor sensitivity is fixed, and based upon the sensor range selected. Available in indoor, outdoor, atrium, and skylight configurations.

The Dual Technology Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-DMV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Passive Infrared (PIR) Single Relay Vacancy Sensing Wall Switch with Night Light is a lighting control and wall switch all-in-one that is used for energy savings and convenience. VNLW-P-1001-MV-N is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. The night light activates when the sensor turns the lights OFF. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Passive Infrared Low Voltage Occupancy Sensing Wall Switch is a motion sensing lighting control and that is used for energy savings and convenience. The wall switch that utilizes an isolated Form-C relay that integrates directly with lighting control, building, and HVAC systems. The ONW-P-1001-SP is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings. HVAC mode allows the load connected to the Form C BAS relay to remain ON when the lights are turned OFF manually.

The MicroSet Passive Infrared Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. For units to sense motion, the person must cross between two segments. PIR sensors are considered line-of sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Forward Power Dimmers are system accessories for Cooper lighting control systems. It allows dimming control of 2 or 3-wire loads via 0-10V control signals. Each module includes a backbox, heatsink, temperature sensor to monitor operating temperature.

The Heavy Duty Switchpack provides 15 VDC operating voltage to all low voltage, 15 VDC, occupancy sensors and daylighting controllers. A single powerpack can provide power for up to five sensors. Up to ten switchpacks can be connected to one sensor for control of multiple circuits. Isolated contacts may also be used to control HVAC, contactors, motors, etc.

The MicroSet Passive Infrared Line Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor is available in both single and dual load control.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-MV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The EISSBox™ is a Virtual End Node (VEN) device installed at the customer site and receives secure OpenADR 2.0 web services from the Utility and provides a signal to the lighting control system.

The SP20-RD4 is the latest addition to the Greengate Switchpacks family, delivering a wide array of switching solutions in a single unit. This robust powerpack is designed to deliver unmatched performance. The SP20-RD4 features robust and reliable mechanical latching relays, exclusive fail-safe circuitry, daylight harvesting, bi-level switching and is configurable for energy code requirements. The switchpack is specifically designed to handle high inrush electronic ballast loads and offer unmatched durability and service.

The Distributed Low-Voltage Power System personal remote is a handheld IR device used to customize the intensity of LED lighting control zones to achieve a desired lighting scene. The personal remote can also be used to save a created lighting scene to a scene wall station and a scene button on the personal remote for easy recall. The personal remote communicates with the system through an IR interface which is part of an open-loop daylight sensor or closed-loop fixture integrated sensor.

The VSW-P-0801-120 Passive Infrared Single or Multi-way Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. The VSW-P-0801-120 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with incandescent, LED, fluorescent, CFL, MLV, ELV or 1/6 HP motor load.

The Momentary Decorator Switch is a system accessory for the Greengate Lighting Control System. This switch is recommended for most low voltage switching applications and fits a standard decorator wallplate. The Momentary Decorator Switch is a low voltage contact closure device used with Greengate Lighting Control Panels and Occupancy Sensors. When toggled, the switch momentarily makes a contact closure to the lighting control panel or occupancy sensor, sending an “ON” signal. When not pressed, the switch is in the (open) position.

The Momentary Toggle Switch is a low voltage contact closure switch used with Greengate Lighting Control Panels. When toggled up or down, the switch momentarily makes a contact closure to the lighting control panel, sending an “On” signal and has a center “Off” position. These switches have 0.050” (1.27mm) zinc-plated thick steel mounting straps for corrosion resistance and the combination slot/Phillips head mounting and terminal screws make for ease of installation.

The BMS Pro products are feature-rich, high performance protocol translators which allows data exchange between Cooper's (Greengate, WaveLinx Wired and Fifth Light) lighting control systems and the Building Automation Systems and other third party systems using standard based communication protocols. The BMS Pro 2 converts Cooper’s Greengate, WaveLinx Wired and Fifth Light lighting control systems’ protocols to BACnet/IP, BACnet MS/TP, Modbus TCP/IP, Modbus RTU.

Fifth Light’s Lighting Control Panel (LCP) is used to control and operate all lighting devices using Digital and Addressable Lighting Interface (DALI) and low-voltage analog signals. It houses the lighting controller, lighting management software and various types of lighting interface modules. Modular design capable to support up to 32 DALI Bus Cards, 48 Digital input cards and 9 Analog Input interfaces hence providing lighting engineers and contractors the flexibility and scalability needed to support all sizes and types of lighting applications, i.e. from small or large facilities, fluorescent to LED, local to networked architecture. Intuitive web based user interface allowing users to manage their lighting system from different computing platforms (desktops, laptops, smart phones, tablets) with access the lighting control network. Factory assembled and pre-wired Lighting Control Panel ready to be installed by the electrical contractor with minimal wiring and eliminating non-valued added on-site panel assembly and wire termination work. LED diagnostics indicators and built-in commissioning mode allowing contractors to easily test and commission the DALI Bus hence reducing the overall commissioning time of a DALI based lighting management system. Built to operate as a local Lighting Control Panel or as part of a distributed lighting control network with multiple lighting control panels and a Central Server Unit for a centralized management of large lighting control system.

Fifth Light’s Lighting Management Software (LMS) allows facility managers to design, configure and maintain their facility’s lighting system. The LMS governs all the devices connected to the Fifth Light lighting control panels and the control strategies for each of these devices. Using this intuitive, web-based software application, facility managers are able to easily analyze the building’s lighting system usage and quickly update the system to improve the energy consumption.

Fifth Light‘s XML integration module permits 3rd party systems to control and manage the addressable lighting control system. It allows facility managers to provide energy savings and user comfort by easily integrating multiple systems using Web Services.

The Fifth Light Virtual Central Manager is an virtualization-ready application tested and certified for a virtual environment powered by VMWare® software. The virtualization-ready application consists of the lighting management software application and the required operating system to run the application. In today’s economy, facility managers must find ways to do more with less, which means reducing operating costs while maintaining the building’s systems. The Fifth Light Virtual Central Manager provides the following benefits. Reducing Hardware Cost – With the Virtual Central Manager, there is no need for dedicated hardware to run the Central Manager. Facility and Utility Cost – In addition to removing the need for dedicated computer hardware, the Virtual Central Manager also reduces the space, power and maintenance required to run the lighting control system. System Availability – The Virtual Central Manager allows users to update their OS, applications and hardware without having to worry about disrupting daily building operations or having hardware/software compatibility issues.

The Digital to Analog Converter (DAC) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting two wire communications bus.

Lumentender® is a cross-platform cloud-based solution for Scheduling, Control, and Management of supported* APl-based, Internet Connected lighting control systems. The sleek user interface is specifically designed to allow owners, maintenance, and administrative personnel the ability to manage their systems from any web-connected device.

ThePharos BPS (Button Panel Station)is a versatile 8-button station with integrated button LEDs that works with any Pharos Controller. The stylish BPS is available in a range of finishes and there are two variants for compatibility with either US or UK back boxes. Install is easy and convenient as the BPS only requires a single Power-over-Ethernet (PoE) network connection. The function of each button is freely programmable, and each button has a white LED indicator with fully user-controllable brightness and a variety of flash effect options for giving visual feedback. In addition, a learning infra-red sensor is included, allowing any standard remote control to be used to trigger button presses. The BPS is part of the Pharos range of Remote Devices, which allows the fully scalable Pharos system to be tailored to the needs of each individual project. Multiple Pharos Controllers can be used together with up to 200 Remote Devices and will synchronize automatically. The Controllers are programmed using the free Pharos Designer 2 software.

The Intelligent Lighting Controls line voltage wall switch & 0-10 volt dimmer provides a stylish solution for spaces where manual dimming control is required. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection. For dimming adjustment, intuitive raise and lower buttons are present in addition to the on/off button. Five vertically stacked LEDs are provided to indicate the current dimming level. Configurable dimming parameters include High/Low Trims, Turn on Levels, and Curve Types. This dimmer also matches the ILC family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

The Apprentice 3 programmable lighting control panel is an energy saving lighting controller. You can network up to 48 control points and 64 LightSync™ devices per network and connect via easy to use RJ-45 ports. Connect and program panels using a USB port on a laptop and our free Apprentice 3 software. Add-on cards are easy to install and and add the following capabilities: BACnet, LonWorks, N2, MODBUS, TCP/IP, or modem interface, DMX control and DTMF telephone switching. Also optional remote mount 0-10V isolated dimming control modulesforstandard daylight harvesting operations.

A LightLEEDer-24, -40, or -48 MicroLite Retrofit Insert can take your present outdated or failing MicroLite lighting control system and get it up to todays standards. All of the enhanced features of the LightLEEDer system will be available with this retrofit system from LightSync switches to BAS control. Upgrades are as simple as removing the existing hardware and replacing it with the LightLEEDer hardware provided on a single back plate insert. Reuse existing enclosure, conduit, and wiring. The LightLEEDer programmable lighting controller retrofit insert provides a dependable, flexible, and energy savings controller featuring the robust Reliant40 relay.

Intelligent Lighting Controls wireless power pack controllers switch on/off power to a connected lighting load as directed by wirelessly linked sensors, photocells, and wall controls. Additionally, the unit’s 0-10V dimming option greatly simplifies applications where dimming control from multiple switch locations is required. For applications where a hybrid wireless/wired architecture is desired, this wireless power pack can also be ordered with auxiliary low voltage connections.

The LightLEEDer programmable lighting control relay panel is the key to a powerful, dependable, flexible and energy efficient lighting system. LightLEEDer panels come with our new Reliant40 relays which feature a superior four contact design—the first true 40Amp lighting relay. Reliant40 relays come in 1-, 2- and 3-pole configurations in a robust breaker-style body. LightLEEDer panels range in size from 4 to 64 relay capacity and are equipped with CAT-5 RJ45 connectors for LightSync data line devices and interconnecting panels. Panels include a keyboard and LCD screen, along with USB and TCP/IP connections for easy programming with our free LightLEEDer Pro Software. Add-on modules are available for connecting to BAS, theatrical, or security systems.

LightSync Touch Screen Stations provide the ultimate in wall-mounted touch control, ideal for conference rooms or architectural controls. These multi-screen touch stations communicate directly to the lighting control system on the LightSync network. Choose the 3.5" with 320 x 240 resolution, 4.3”screen with a 480 x 272 resolution, or the 7.0"screen with a 800 x 480 resolution; both have a 65K true color LCD screen with resistive touch. The touch controlstations are a complete package, provided with an electrical box that containsthe complete interface, just connect to the LightSync data line and a 120VAC source. The touch screen has a capacity of up to 16 screens that can be designed with a variety of controls and security. With the use of the included intuitive software, youwill be able to design the controlstation screensto your facility's needs.

The INTELLIGENT LIGHTING CONTROLS family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage INTELLIGENT LIGHTING CONTROLS 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. INTELLIGENT LIGHTING CONTROLS products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in addition to an on/off button.

The LightSync Occupancy Sensor 8 Input module is designed to power and receive signals from multiple sensors on each of its 8 independent inputs. Eliminate expensive power packs by simply direct- wiring the sensors into the inputs. This module mounts remotely in a location central to the sensors. Each independent input can control any relay(s), group(s), or preset(s) throughout the network.

The LightSync EVO Integrated 2 Room Controller has 2 isolated relays with 0-10V dimming. This controller integrates the control options of an EVO-RC with two on-board relays in one package for easy installation. Up to 3 LSEVO-INT-2-RC room cantrollers can be added to a LLEVO-INT-2 to extend its control into additional rooms or a small office with two zones of lighting control with daylight harvesting or one lighting zone and a plug load. It has RJ-45 ports for local digital LightSync switches, occupancy sensors, and a photo sensor. This convenient and easy to install two relay room controller is great for extending the controls of an LLEVO-INT-2 controller.

High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD DCS is a digital, high definition, passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. It features four pyroelectric detectors with a high performance lens system that creates a new global standard in detection with 4,800 switching zones. Included light level feature provides the option to dim and turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting allows a precise method of controlling lighting zones by means of optimizing the detection reach without compromising sensitivity. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.

PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro DIM-24 is a low voltage passive infrared presence detector setting a new standard in lighting and 1-10 volt dimming control with minimal movement required for human presence detection. Provides for superior presence detection, energy savings and occupant convenience. Lighting is controlled in relation to both the presence of motion and ambient light levels. Operational choices of manual on or auto on with either momentary or maintained switch options. The Stay ‘ON’ time DIM before ‘OFF’ option provides basic illumination for the selected stay-‘ON’ time when ambient light falls below the selected brightness threshold that is set. This can be dimmed to 10% of maximum light intensity. As soon as a person is detected, the sensor switches either to 100% light intensity (constant-lighting controller ‘OFF’) or adjusts to the preselected brightness level (constant-lighting controller ‘ON’). When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brightness after the stay ‘ON’ time (1 min. - 30 min.) has expired or the daylight level exceeds the selected level of brightness. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available time saving wireless remote commissioning and set up tool and the user / occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).

PIR 360° Ceiling Mount Occupancy Sensor. The IS 3360-24 is part of the STEINEL family of German engineered, high performance commercial occupancy sensors. With 360° of uninterrupted coverage, the IS 3360-24 provides exceptional lighting control in a wide range of spaces. IS 3360-24 sensors are passive infrared and respond to heat radiated from human body motion. They mount on a ceiling and turn lighting ON either automatically with occupancy or manually using a low voltage wall switch and the manual on mode of a STEINEL power pack. After a period of time where no occupancy has been detected, the sensor switches lighting OFF.

High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD COM1-24 is a low voltage, high definition, passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. Features four digital pyroelectric detectors with a high performance lens system that creates a new global standard in detection with 4,800 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy saings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the detection reach without compromising sensitivity providing precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available time saving wireless remote commissioning set up tool and the user /occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).