160 manufacturers · 18,987 products

The Passive Infrared Single Level Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. The VNW-P-1001-MV uses Passive Infrared (PIR) sensor technology to monitor a room for occupancy and deliver maximum energy savings. The lights are turned ON by pressing the universally recognized light icon pushbutton. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Dual Technology Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. The ONW-D-1001-DMV-N combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

Dual Relay Switchpacks provide 24 VDC operating voltage to all low voltage, 24 VDC, Greengate occupancy sensors and day lighting controllers. These powerpacks can be used where two circuits need to be controlled at the same point. A single switchpack can provide power for up to five sensors. Up to ten switchpacks can be connected to one sensor for control of multiple circuits. Isolated contacts may also be used to control HVAC, contactors, motors, etc.

The Passive Infrared Low Voltage Occupancy Sensing Wall/Corner sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. Manual On feature for use with 1 or 2 momentary switches controlling 1 or more Switchpacks.

The Passive Infrared Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The External Power Supply is a system accessory for the Greengate Lighting Control System. It is used to power user interfaces and other accessories when additional power is needed.

The OSW-P-1001-MV Passive Infrared Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. In Automatic On Mode, the lights turn ON when a person enters the room. In Manual On Mode, the lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as one of the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with Incandescent, LED, Fluorescent, CFL, MLV, ELV or 1/2 HP motor load.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. The ONW-D-1001-MV-N combines Ultrasonic and Passive Infrared (PIR) sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The passive infrared Extreme Temperature Sensor provides consistent, stable coverage where extreme heat, cold or humidity must be accommodated, and where there are wide fluctuations in temperature. Temperature compensating circuitry stabilizes sensitivity at temperatures –40°F to 125°F (-40°C to 52°C). Ambient light control circuit to avoid False ON/OFF from brief changes in background light. Lighting sweep function with selectable DIP Switch prevents unnecessary “lights ON” following power sweeps in facilities with computer control systems

The MicroSet Ultrasonic Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The ultrasonic sensor uses the Doppler principle. It produces a low intensity, inaudible sound and detects changes in sound waves caused by motion, such as walking into the room, reaching for the telephone, or turning in a chair. They are volumetric in nature and therefore not line-of-sight dependent. Since they fill the space with these sound waves, they are excellent in bathrooms with stalls, enclosed hallways, or other oddly shaped rooms. In addition, they are much more sensitive to smaller motions. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Dual Technology Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-DMV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Passive Infrared (PIR) Single Relay Vacancy Sensing Wall Switch with Night Light is a lighting control and wall switch all-in-one that is used for energy savings and convenience. VNLW-P-1001-MV-N is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. The night light activates when the sensor turns the lights OFF. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Passive Infrared Low Voltage Occupancy Sensing Wall Switch is a motion sensing lighting control and that is used for energy savings and convenience. The wall switch that utilizes an isolated Form-C relay that integrates directly with lighting control, building, and HVAC systems. The ONW-P-1001-SP is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings. HVAC mode allows the load connected to the Form C BAS relay to remain ON when the lights are turned OFF manually.

The MicroSet Passive Infrared Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. For units to sense motion, the person must cross between two segments. PIR sensors are considered line-of sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Forward Power Dimmers are system accessories for Cooper lighting control systems. It allows dimming control of 2 or 3-wire loads via 0-10V control signals. Each module includes a backbox, heatsink, temperature sensor to monitor operating temperature.

The Heavy Duty Switchpack provides 15 VDC operating voltage to all low voltage, 15 VDC, occupancy sensors and daylighting controllers. A single powerpack can provide power for up to five sensors. Up to ten switchpacks can be connected to one sensor for control of multiple circuits. Isolated contacts may also be used to control HVAC, contactors, motors, etc.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-MV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The EISSBox™ is a Virtual End Node (VEN) device installed at the customer site and receives secure OpenADR 2.0 web services from the Utility and provides a signal to the lighting control system.

The VSW-P-0801-120 Passive Infrared Single or Multi-way Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. The VSW-P-0801-120 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with incandescent, LED, fluorescent, CFL, MLV, ELV or 1/6 HP motor load.

The Intelligent Lighting Controls line voltage wall switch & 0-10 volt dimmer provides a stylish solution for spaces where manual dimming control is required. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection. For dimming adjustment, intuitive raise and lower buttons are present in addition to the on/off button. Five vertically stacked LEDs are provided to indicate the current dimming level. Configurable dimming parameters include High/Low Trims, Turn on Levels, and Curve Types. This dimmer also matches the ILC family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

The Apprentice 3 programmable lighting control panel is an energy saving lighting controller. You can network up to 48 control points and 64 LightSync™ devices per network and connect via easy to use RJ-45 ports. Connect and program panels using a USB port on a laptop and our free Apprentice 3 software. Add-on cards are easy to install and and add the following capabilities: BACnet, LonWorks, N2, MODBUS, TCP/IP, or modem interface, DMX control and DTMF telephone switching. Also optional remote mount 0-10V isolated dimming control modulesforstandard daylight harvesting operations.

A LightLEEDer-24, -40, or -48 MicroLite Retrofit Insert can take your present outdated or failing MicroLite lighting control system and get it up to todays standards. All of the enhanced features of the LightLEEDer system will be available with this retrofit system from LightSync switches to BAS control. Upgrades are as simple as removing the existing hardware and replacing it with the LightLEEDer hardware provided on a single back plate insert. Reuse existing enclosure, conduit, and wiring. The LightLEEDer programmable lighting controller retrofit insert provides a dependable, flexible, and energy savings controller featuring the robust Reliant40 relay.

Intelligent Lighting Controls wireless power pack controllers switch on/off power to a connected lighting load as directed by wirelessly linked sensors, photocells, and wall controls. Additionally, the unit’s 0-10V dimming option greatly simplifies applications where dimming control from multiple switch locations is required. For applications where a hybrid wireless/wired architecture is desired, this wireless power pack can also be ordered with auxiliary low voltage connections.

The LightLEEDer programmable lighting control relay panel is the key to a powerful, dependable, flexible and energy efficient lighting system. LightLEEDer panels come with our new Reliant40 relays which feature a superior four contact design—the first true 40Amp lighting relay. Reliant40 relays come in 1-, 2- and 3-pole configurations in a robust breaker-style body. LightLEEDer panels range in size from 4 to 64 relay capacity and are equipped with CAT-5 RJ45 connectors for LightSync data line devices and interconnecting panels. Panels include a keyboard and LCD screen, along with USB and TCP/IP connections for easy programming with our free LightLEEDer Pro Software. Add-on modules are available for connecting to BAS, theatrical, or security systems.

The LightSync Occupancy Sensor 8 Input module is designed to power and receive signals from multiple sensors on each of its 8 independent inputs. Eliminate expensive power packs by simply direct- wiring the sensors into the inputs. This module mounts remotely in a location central to the sensors. Each independent input can control any relay(s), group(s), or preset(s) throughout the network.

The LightSync EVO Integrated 2 Room Controller has 2 isolated relays with 0-10V dimming. This controller integrates the control options of an EVO-RC with two on-board relays in one package for easy installation. Up to 3 LSEVO-INT-2-RC room cantrollers can be added to a LLEVO-INT-2 to extend its control into additional rooms or a small office with two zones of lighting control with daylight harvesting or one lighting zone and a plug load. It has RJ-45 ports for local digital LightSync switches, occupancy sensors, and a photo sensor. This convenient and easy to install two relay room controller is great for extending the controls of an LLEVO-INT-2 controller.

SENSORWORX line voltage wide view and hallway occupancy sensors are self-contained lighting control solutions that mount to the wall, corner, or ceiling. Using an adjustable angled bracket and multi-position chase nipple, these sensors reduce contractor installation time and provide a secure and clean finished appearance. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally, these SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion will be limited.

The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple yet cost-effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowed wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in a addition to an on/off button.

The SENSORWORX family of wall switch occupancy sensors provides a simple yet cost-effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.

The WaveLinx PRO Contact Closure Input Module (CCI-P-V) provides analog devices with an interface and network addressability. It offers two modes : mode one has four inputs for momentary and sustained contact inputs . In the second mode the first channel on the device provides an input to the occupancy sensor. The CCI module communicates with other devices on the network and can easily be managed via the WaveLinx mobile app.

Easily adjustable compact digital ceiling sensor that excels due to its ability to utilize an industry leading mobile app to provision and troubleshoot. The mobile app allows contractors and technicians cut onsite time through an intuitive interface that provides active sensor feedback and provisioning flexibility. The device’s slim form factor provides a sleek aesthetic that blend into the ceiling maintaining the spaces visually appeal.

The WaveLinx Wired Digital to Analog Converter (DAC-DC1 / DAC-DC2) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting two wire communications bus.

The WaveLinx PRO Universal Voltage Dimming Switchpack (RSP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The RSP-P consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. This powerpack is an integral part of the WaveLinx system. It communicates with other PRO devices and WaveLinx Area Controller using PRO protocol, a 2.4GHz wireless mesh network based on IEEE 802.15.4 standard.

The WaveLinx Wired External Network Aux Power Supply (EXPS-15V) is a system accessory for the WaveLinx Wired Lighting Control System. It is used to power user interfaces and other accessories when additional power is needed. If there are more than 10 wall stations and/or cable runs are greater than 1,000 feet, an External Power Supply is to be used. Each External Power Supply is capable of extending the cable run an additional 1,000 feet, or 10 wall stations.

The WaveLinx Wired Lighting Control Network Jack (LCNJ) is a system accessory to the WaveLinx Wired Lighting Control System. This device allows access to the WaveLinx Wired network while in the space where the lighting levels are being modified. It is preferred to be in the space being modified when setting and saving light levels to create different moods/atmospheres.

The PRO Ceiling Sensor (CWPD-1500), a room based wireless sensor is an integral part of the WaveLinx System and offers Passive Infra Red (PIR) occupancy sensing. They have coverage patterns up to 1500 square feet. The room based sensor is battery powered and is one of the smallest ceiling mounted room based wireless occupancy sensors on the market. The sensor operates on a wireless mesh network based on IEEE 802.15.4 standards.

The WaveLinx Wired Universal Source Controller (SC-UN) lighting control panel sets a new standard in architectural lighting control. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, real-time individual circuit power metering and Phase Sense technology designed to ensure control even during individual phase failure.

CORE Insights App (TRX-INSOCC) is a Space Analytics software application that allows users to monitor, compare and analyze their space usage to increase workplace effectiveness. It gives you dashboards to visualize space occupancy information in real-time and historical time ranges.

The WaveLinx PRO Area Controller with IP66-Outdoor Rated Enclosure (WAC2-POE-OUT-EN) is the main component of the WaveLinx Pro wireless connected lighting (WCL) system. WaveLinx Pro eliminates the cost and complexity of typical wireless control system commissioning while providing a flexible and reconfigurable topology for on the fly space adjustments. The WaveLinx Pro system meets modern code and utility requirements, delivers energy and cost savings, while enabling buildings to become smart buildings. The WAC coordinates between the WaveLinx Pro smart and connected Mobile App and various WaveLinx Pro devices to create communications and a building ecosystem that provides out-of-the-box functionality and leverages Cooper Lighting Solutions patent pending automatic code commissioning features. Using standard-based wireless mesh compliant topology the WAC communicates to various WaveLinx Pro standard-based devices to provide area, lighting zone configuration, monitoring, and control. The WAC provides centralized coordination of multiple areas for partial ON/partial OFF scheduling, demand response (Trellix application required), lighting, occupancy and daylight settings and scene control. A single WAC can be connected to the building Local Area Network (LAN) to coordinate 49 user-defined and one construction area, or multiple WAC’s can exist on a building LAN to scale the system to hundreds of areas all accessible for setup, configuration and control through the WaveLinx Pro Mobile App.

The WaveLinx Wired Recessed Combination Sensor (NS3-C-NA) can be connected directly to the iLumin Network via CAN terminals. It features three functions: PIR motion detection, daylight measurement and an infrared (IR) receiver. All three functions may be programmed within the iLumin software according to specific user needs. This sensor features a coverage of up to 27.8 ft (8.5m) diameter depending on installation height with PIR detection optimized for slight motion for superior performance. The PIR feature may be set in Manual or Automatic On with a custom time-out setting. The daylight feature is used to set light levels where daylighting is required. In Operational Mode the infrared receiver may select Scenes, turn lighting ON/OFF and adjust levels locally with the iLumin IR Handheld Remote (HH17IR). The NS3-C sensor’s combined features ensure maximum energy savings as well as great flexibility for the user.

The WaveLinx LITE Switchpack (RSP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The powerpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. The Switchpack integrates into the LITE system by forming a mesh networking while communicating with other LITE devices using Bluetooth protocol.

WaveLinx Wired is your wired solution for high complexity lighting control specifications, including energy management, architectural and DMX control within a single system. The WaveLinx Wired IL Area Controllers (ILS / ILM / ILL) feature modular design control panels with digital, 0-10V dimming, relay modules, bridge interface, and ethernet gateway.

The WaveLinx DALI Digital to Analog Converter (DAC-DC1 / DAC-DC2) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting Solutions two wire communications bus.

Take smart lighting to the next level with the UNB Network Lighting Control Telecell, the world’s most deployed wireless controller, proudly powered by Telensa. With over 2 million nodes installed globally and more than a decade of proven performance, this compact powerhouse is no larger than a standard photocell and is available for every luminaire type, including decorative fixtures. Engineered for reliability and scalability, the Telecell provides robust control and monitoring capabilities across expansive networks.

Delivering reliable, city-wide lighting control, the Ultra Narrow Band (UNB) Network Lighting Control Base Station from Trellix Infrastructure is built for scale and simplicity. Powered by Telensa, this base station enables dedicated wireless connectivity for thousands of connected lighting fixtures, ensuring seamless operations with minimal ongoing costs. Designed for rapid deployment and long-term performance, it’s the smart choice for future-ready infrastructure.