160 manufacturers · 18,987 products

The Passive Infrared Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. ONW-P-1001-MV is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The MicroSet Dual Technology Line Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. MicroSet self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period. The sensor is available in both single and dual load control.

The Lighting Relay Module is available in 347 VAC input voltage. The Lighting Relay Module (LRM) is designed to force all relays in a lighting control panel to an ON or Closed state regardless of the control panel programmed relay status. This allows the closure of relays during loss of normal (grid) power to allow an alternate power source to drive the lighting loads.

The MicroSet Passive Infrared Line Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor is available in both single and dual load control.

The WaveLinx Wired Digital to Analog Converter (DAC-DC1 / DAC-DC2) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting two wire communications bus.

The WaveLinx PRO Universal Voltage Dimming Switchpack (RSP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The RSP-P consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. This powerpack is an integral part of the WaveLinx system. It communicates with other PRO devices and WaveLinx Area Controller using PRO protocol, a 2.4GHz wireless mesh network based on IEEE 802.15.4 standard.

The WaveLinx Wired External Network Aux Power Supply (EXPS-15V) is a system accessory for the WaveLinx Wired Lighting Control System. It is used to power user interfaces and other accessories when additional power is needed. If there are more than 10 wall stations and/or cable runs are greater than 1,000 feet, an External Power Supply is to be used. Each External Power Supply is capable of extending the cable run an additional 1,000 feet, or 10 wall stations.

The WaveLinx Wired Lighting Control Network Jack (LCNJ) is a system accessory to the WaveLinx Wired Lighting Control System. This device allows access to the WaveLinx Wired network while in the space where the lighting levels are being modified. It is preferred to be in the space being modified when setting and saving light levels to create different moods/atmospheres.

The WaveLinx PRO Outdoor Lighting Control (WOLC) Module extends the WaveLinx System’s controls capability to a building’s surroundings or site such as parking lots and short pathways. The WOLC Module is individually addressable and installs on top of a light pole via an ANSI 136.41-compliant, 7-pin twist-lock connector. It can switch luminaires ON/OFF via an integrated high current relay and dim luminaires equipped with 0-10V dimming drivers or ballasts. It communicates with the WaveLinx Wireless Area Controller over an IEEE 802.15.4 network.

The WaveLinx Wired Universal Source Controller (SC-UN) lighting control panel sets a new standard in architectural lighting control. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, real-time individual circuit power metering and Phase Sense technology designed to ensure control even during individual phase failure.

CORE Insights App (TRX-INSOCC) is a Space Analytics software application that allows users to monitor, compare and analyze their space usage to increase workplace effectiveness. It gives you dashboards to visualize space occupancy information in real-time and historical time ranges.

The WaveLinx Wired Recessed Combination Sensor (NS3-C-NA) can be connected directly to the iLumin Network via CAN terminals. It features three functions: PIR motion detection, daylight measurement and an infrared (IR) receiver. All three functions may be programmed within the iLumin software according to specific user needs. This sensor features a coverage of up to 27.8 ft (8.5m) diameter depending on installation height with PIR detection optimized for slight motion for superior performance. The PIR feature may be set in Manual or Automatic On with a custom time-out setting. The daylight feature is used to set light levels where daylighting is required. In Operational Mode the infrared receiver may select Scenes, turn lighting ON/OFF and adjust levels locally with the iLumin IR Handheld Remote (HH17IR). The NS3-C sensor’s combined features ensure maximum energy savings as well as great flexibility for the user.

The WaveLinx LITE Switchpack (RSP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The powerpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. The Switchpack integrates into the LITE system by forming a mesh networking while communicating with other LITE devices using Bluetooth protocol.

WaveLinx DALI panels integrate DALI-2 certified drivers (DT6 and DT8) and peripherals into the WaveLinx lighting control. Available in three sizes with up to six DALI-2 hubs, they feature factory pre-wiring, LED diagnostics, and mobile app commissioning. Ideal for small to large projects, WaveLinx DALI ensures flexibility, easy installation, and seamless integration with other technologies (like WaveLinx CAT and PRO) v WaveLinx Area Controller.

WaveLinx Wired is your wired solution for high complexity lighting control specifications, including energy management, architectural and DMX control within a single system. The WaveLinx Wired IL Area Controllers (ILS / ILM / ILL) feature modular design control panels with digital, 0-10V dimming, relay modules, bridge interface, and ethernet gateway.

The WaveLinx DALI Digital to Analog Converter (DAC-DC1 / DAC-DC2) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting Solutions two wire communications bus.