160 manufacturers · 18,987 products

Pivot is an architectural linear magnetic track lighting system for pendant and recessed mounting. Modular and expandable, it is composed of 10+ modules to mix and match, including linear modules up to 8 feet, track head modules (Dot & Box), cylinder modules, and linear downlight modules. Offered as a direct only or direct/indirect system, Pivot has the flexibility to answer a wide variety of lighting applications, from general to accent to wallwash, with the adaptability to change it up with a simple click of a magnet. 48V track Integral drivers Pendant or recessed 10+ modules Up to 1000 lm/ft 1.55 inches in width Direct or direct/indirect Direct: modules or blank options Indirect: wide indirect optic or blank options A variety of control options

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The Halo Two Circuit Current Limiter is available in End-Feed and Center-feed models. Can be utilized on hard or grid ceilings as well as pendant suspended track. Breaker can be used as an on-off switch and features a “tripped” condition indicator. Feeds employing two circuit breakers do not require breakers to be the same size. Each breaker can be sized according to desired load. Approved by the California Energy Commission – meets Title 24 requirements. cULus Listed

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

Halo Raceway Trac provides electrical flexibility at a fraction of the cost of conventional wiring on long linear runs. This Economical single-circuit raceway track is the most versatile track system on the market. Top portion of track is designed as a raceway - it will carry up to 6 #12 AWG conductors. Raceway can be used to feed additional sections of track from the original feed point, minimizing installation time and cost. L's, T's and X's allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

Live-end feed for HTEK4 two-circuit / two neutral 277V 20 Amp track. Multiple breaker sizes are available. Can be utilized on hard or grid ceilings. Can be used with pendant suspended track. Breaker can be used as an on-off switch. Approved by the California Energy Commission - meets Title 24 requirements. cULus Listed.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

Live-end feed for TEK4 two-circuit / two neutral 120V 20 Amp track. Multiple breaker sizes are available. Can be utilized on hard or grid ceilings. Can be used with pendant suspended track. Breaker can be used as an on-off switch. Approved by the California Energy Commission - meets Title 24 requirements. cULus Listed.

3-1/2" Square Integrated LED Cylinder: Flexible Cable/Track Mount

Line Voltage Track Adapter for Quick Release 6W LED Mini Pendant

Line Voltage Track Adapter for Quick Release 8W LED Pendant

Odyssey Line Voltage Flexible Track Adapter with Dimming Driver for 6W Quick Release LED Mini Pendant

Odyssey Line Voltage Flexible Track Adapter with Dimming Driver for 8W Quick Release LED Pendant

3-1/2" Integrated LED Cylinder: Flexible Cable/Track Mount

Pendant Stem Kit for W Track in Black

Silo 2020 Adjustable Beam Track Pendant 2700K in Black/Black

Pendant Stem Kit with Power Feed for W Track in Black

Silo 2015 Adjustable Beam Track Pendant 2700K in Black/Black

This rustic wood log chandelier is hand-crafted from distressed cedar planks. The wood log contains a track in the center that houses the wires for the 10 cord and sockets. The cords come 8 feet in length and are meant to be wrapped around the wood log at the desired length and look of the overall fixture. Mounted with aluminum brackets, loops and chains which give this fixture and industrial look. This chandelier is a unique piece and will be the center of attention in any space. For more information click to view the specification sheet below.

Bell Category:Magnetic Track Collection,MAGNETIC TRACK SYSTEM The Bell Track Collection offers a modern DC Track System with three profile options: Surface-Mounted S, Surface-Mounted L, and Recessed. Available in black and white finishes, the system comes in lengths of 39.4″, 78.7″, and 118″. It features spotlights and pendant lights from the Bell series, with up to 10 customizable pieces. LED lighting options include CCT of 3000K, 4000K, or 5000K, with CRI of 80 or 90. Crafted from durable aluminium with an electrostatic powder coating, this collection is perfect for versatile and stylish indoor lighting.

Our Gamma LED System combines track spots and pendants with illuminated tubes to create a custom lighting system for any space. Choose from a wide range of LED types including 2700K, 3000K, 3500K, 4000K, tunable white, RGB, RGBW and Pixel. Combine pendant, wall and ceiling mounting options to create the perfect setup and select from custom metal finishes for a unique look.