160 manufacturers · 18,987 products

Via Splash, with its IP66 rating, offers energy-efficient architectural lighting for demanding, wet locations (including wash down) in both exterior and interior applications. The simple housing of extruded aluminum is fully sealed and available in lengths up to 12'. suitable for temperatures from -20ºC/-4ºF to 40ºC/104º, Via Splash can be installed in pendant, surface, wall, or pendant applications. Choose from Direct, Direct/Indirect, and Asymmetric light distributions. Light output ranges from 500 to 2000 lumens per foot, with color temperatures up to 5000K and efficacies up to 116 LPW. Multiple enclosure, electrical, emergency, and control options are available.

Voila 2" downlights and wall washers are available in round and square apertures with Open Frame, IC and CCEA housings, all requiring less than 4" of plenum depth. Downlights adjust 30º vertically with screw thread mechanism and rotate 360º horizontally. Using HyFlex optics, field-interchangeable beam angles range from 10º to 90º. Integral drivers are available for 0-10V, ELV or Triac dimming and can be replaced through the 2" aperture. Remote drivers are available for other protocols, emergency operation, and ChromaWerx Sola and Duo. Die-cast baffles are offered in 0.5" and 1.0" depth with trim or trimless options and multiple finishes. Pre-set luminaire light output is available from up to 1340 lumens. Voila 2" downlights has an IP44 rating.

Via Splash, with its IP66 rating, offers energy-efficient architectural lighting for demanding, wet locations (including wash down) in both exterior and interior applications. The simple housing of extruded aluminum is fully sealed and available in lengths up to 12'. suitable for temperatures from -20ºC/-4ºF to 40ºC/104º, Via Splash can be installed in pendant, surface, wall, or pendant applications. Choose from Direct, Direct/Indirect, and Asymmetric light distributions. Light output ranges from 500 to 2000 lumens per foot, with color temperatures up to 5000K and efficacies up to 116 LPW. Multiple enclosure, electrical, emergency, and control options are available.

Togo provides generous ambient illumination from a minimal and elegant ring form. Nestled in a crisp 4" high opaque band, the distinctive, annular diffuser glows inwardly. The diffuser’s softly rounded compound curve lends Togo a slender appearance. Available in 18", 24", 36" and 48" diameters. Togo delivers efficient, widesoread, direct/indirect illumination (65/35) with spacing criteria of 1.6 and a range of light outputs. Togo’s outer housing of extruded aluminum is welded and buffed to a seamless band that can be painted in our nine standard finishes, or an RAL custom color, to coordinate with virtually any interior finish. The Togo driver mounts remotely, either above or below the ceiling. In addition to a conventional power cord, Togo also offers an ultra-clean mounting detail with integrated power and suspension cables. Controls include dimming to 1% in 0-10V, line voltage, and digital protocols. Night light and emergency circuiting are available. Togo supports the full range of ChromaWerx Sola, Duo, and Quadro options for tunable white and RGBW expressive color.

LED VANDAL RESISTANT OUTDOOR SURFACE/WALL BUY AMERICA COMPLIANT The NAUTILUME Series 181 is a vandal resistant, architectural fixture, combining clean lines with durability. The housing is constructed of a marine grade, die-cast aluminum, with an ingress resistant gasket included. The diffuser and guard are made of an injection molded UV stabilized polycarbonate. The unit is finished in black or white. The NAUTILUME is ADA Compliant. An optional deeper housing is available for surface conduit applications, as well as emergency battery pack requirements. Several lumen packages and color temperatures are offered to suit any need. The unit is rated for wet location and is applicable in coastal settings. All units are equipped with an Energy Star LED light engine.

The HALO LCR Series comes in sizes 2", 4", 6" and 8" wall wash and downlights. This high-powered LED module installs without the use of a recessed housing, reducing time and expense on remodel or new construction. The downlight has a wide distribution pattern ideal for general area illumination and the wall wash illuminates a vertical surface with uniform brightness. The LCR series comes with dual dimming as standard and is designed for residential, mixed-use, and commercial spaces. The LCR has ultimate flexibility with selectable color temperature and lumens. During installation select the perfect color temperature for your space with 6 color temperatures between warm (2700K) to daylight (6500K). Depending on your ceiling height or desired light level choose from several lumen options. The LCR Series features an emergency battery option and designer trims in smooth or baffle.

The Corelite Iridium i3 is the latest addition to the Iridium family with a focus on performance and affordability. This curvilinear direct/indirect suspended luminaire offers a wide range of distributions and lumen outputs for individual or continuous row applications. The Iridium i3 is also one the highest performing luminaires in its class with efficacies up to 158 lumens per watt! Optional features such as 90+ CRI, tunable white with VividTune, integrated sensors, and emergency options allow this fixture to meet specific project needs. The Iridium i3 is well suited for commercial office, educational, and healthcare facilities.

Modern single drum LED pendant features LumaFuse™ laminated fabric/acrylic shade that is durable and easy to clean. Stepped white bottom acrylic diffuser disperses the light evenly. Available in five sizes and two shade colors. User selectable color temperature. Options: emergency battery back-up, motion sensor or emergency battery back-up with motion sensor

The Sentinel™ Supplemental Rail Light (SRL) allows the addition of a LED based luminaire to new or existing hand and stair rails. The integrated LED lighting modules of the SRL produce light levels that easily meet both IESNA recommendations and local code requirements for egress pathway lighting. The SRL length is field adjustable, up to 2”, to ensure full contact with the vertical uprights, providing a secure and rigid installation. The SRL LED light fixture can be positioned to provide optimum lighting distribution without glare or unwanted light trespass. Available in both symmetrical and asymmetrical distribution patterns, the SRL is the ideal lighting solution for either center or side locations of stair, aisle and pathways. A selection of lighting levels is available with both differing LED sources and spacings of the lighting modules. Fully dimmable, the SRL can provide suitable LED light levels in any ambient light condition.

Cube Architectural 5.5" LED Wall Mount with Emergency Battery Back Up Flood Beam 2700K in Black

Tube Architectural 6" LED Wall Mount with Emergency Battery Back Up Flood Beam 2700K in Black

Tube Architectural 8" LED Wall Mount with Emergency Battery Back Up Flood Beam 2700K in Black

RSL11 (0–10V LUMINAIRE) FEATURES - Wattage Selectable: 15W, 18W, 20W - Color Temperature Selectable: 2700K, 3000K, 3500K, 4000K, 5000K - CRI: 90+ - Voltage/Dimming: 120–277V (0–10V) - Visual Comfort: Glare control lens - Emergency: 8W EM

RSL4 (0–10V LUMINAIRE) FEATURES - Wattage Selectable: 8W, 10W, 12W - Color Temperature Selectable: 2700K, 3000K, 3500K, 4000K, 5000K - CRI: 90+ - Voltage/Dimming: 120–277V (0–10V) - Visual Comfort: Glare control lens - Emergency: 8W EM

Model#: UVK-900XX The Vekter Extended Arm Post Top is a modern, die-cast aluminum decorative luminaire featuring a square arm design and excellent downward light distribution that meets dark sky compliance standards. Its sleek form and precision optical system deliver outstanding visual appeal with minimal glare and reduced light pollution. This luminaire is available in two configurations—single arm or double arm—to suit a variety of aesthetic and design requirements. What sets the Vekter apart is its availability in Type I, II, III, IV, and V light distribution options, allowing for tailored illumination between luminaires. Wide fixture spacing can be achieved using a Type II optic, while maintaining uniformity that complies with path of egress requirements—resulting in greater energy savings and lower installation costs. For added flexibility, the Vekter can be manufactured with mixed beam optics, such as combining Type II and Type IV within the same fixture, to achieve custom light distribution.

Model#: UVK-3000XX The Vekter with Adjustable Extended Arm is a wedge-shaped, low-profile, wall-mounted luminaire designed specifically for downlight applications where extended reach and precise aiming are required. This variant features an elongated adjustable arm, offering greater flexibility in positioning the light source for optimal coverage. It comes equipped with high-powered LEDs and a selection of optics to meet a variety of lighting needs. The Vekter is available with Type II, III, IV, and V light distribution options, allowing for wider spacing and consistent illumination between fixtures. With a Type II optic, spacings of up to 40 feet on center can be achieved while maintaining uniformity that complies with path of egress requirements—delivering energy savings and reduced installation costs. Custom beam configurations are also possible, such as combining Type II and Type IV optics within the same fixture to achieve tailored light distribution. The integral electronic control gear is housed in a waterproof enclosure, and a mounting plate compatible with 3" and 4" octagonal junction boxes is included. Ideal for lighting footpaths, building facades, entrances, and surrounding parking areas, the Vekter with Extended Adjustable Arm offers enhanced reach, precision, and performance in a sleek, durable design.

Model#: UJE-30XXX  Wall luminaires with a selection of light distributions and LED wattages with downward light distributions. The Jet ofers a variety of beam spread options that facilitates wider spacing and even light distribution between the light fixtures. The up/down light versions can be manufactured using different beam spreads for the up and down optics, as well as different wattages upon request. Integral electronic control gear. Mounting plate for 3" and 4" junction box is provided with the fixture. Matching surface mount conduit boxes are available as an option. Custom round pole adapters can be manufactured to suit specific pole diameters for column mounting applications. Please contact the factory for more information For Type II, III & IV distributions, see Tango 29 to 32 surface wall luminaires. This fixture can be provided with an integrated emergency LED driver, please specify as an option

Model#: UVK-300XX  The Vekter with Adjustable Arm is a wedge-shaped, low-profile, wall-mounted luminaire designed specifically for downlight applications. This variant features an adjustable arm that allows for precise aiming, offering greater flexibility in directing light exactly where it’s needed. Equipped with high-powered LEDs and a range of optical options, the Vekter supports Type II, III, IV, and V light distributions. These options enable wider fixture spacing and consistent illumination. With a Type II optic, spacings of up to 40 feet on center can be achieved while maintaining uniformity that meets path of egress requirements—resulting in improved energy efficiency and lower installation costs. The luminaire can also be configured with mixed beam optics, such as combining Type II and Type IV within the same fixture, to achieve customized light distribution. Integral electronic control gear is housed in a waterproof enclosure, and a mounting plate compatible with 3" and 4" octagonal junction boxes is included. Ideal for lighting footpaths, building facades, entrances, and surrounding parking areas, the Vekter with Adjustable Arm delivers targeted performance, versatility, and architectural appeal.

Model#: UVK-30XXX The Vekter is a wedge-shaped, low-profile, wall-mounted luminaire designed specifically for downlight applications. It features high-powered LEDs and a selection of optics to meet a variety of lighting requirements. Available with Type II, III, IV, and V light distribution options, the Vekter enables wider fixture spacing and consistent illumination. With a Type II optic, spacings of up to 40 feet on center can be achieved while maintaining uniformity that complies with path of egress requirements—resulting in energy savings and reduced installation costs. The luminaire can also be configured with mixed beam optics, such as combining Type II and Type IV within the same fixture, to achieve custom light distribution. Integral electronic control gear is housed in a waterproof enclosure, and a mounting plate compatible with 3" and 4" octagonal junction boxes is included. Ideal for lighting footpaths, building facades, entrances, and surrounding parking areas, the Vekter delivers reliable performance, efficiency, and clean architectural styling.

Model#: UJE-3XXXX Wall luminaires with a selection of light distributions and LED wattages with up and downward light distributions. The Jet ofers a variety of beam spread options that facilitates wider spacing and even light distribution between the light fixtures. The up/down light versions can be manufactured using different beam spreads for the up and down optics, as well as different wattages upon request. Integral electronic control gear. Mounting plate for 3" and 4" junction box is provided with the fixture. Matching surface mount conduit boxes are available as an option. Custom round pole adapters can be manufactured to suit specific pole diameters for column mounting applications. Please contact the factory for more information For Type II, III & IV distributions, see Tango 29 to 32 surface wall luminaires. This fixture can be provided with an integrated emergency LED driver, please specify as an option

Model#: USA-3XXXX   A range of small and large circular wall mounted bulkheads with a vandal resistant UV stabilized polycarbonate diffuser. Ideal for numerous indoor or outdoor applications. Sandy has a subtle chamfered frame and it can be given a more striking appearance by way of different grill and visor options. As with all wall mounted luminaires, these fixtures are provided with a special self-healing waterproof cable gland that prevents water entering the fixture after wiring. This fixture can be provided with an integral self diagnosing emergency battery pack.

Egress marker light with 1W or 2W LED for public access, bridges, tunnels, docks, piers, walkways & pathways.

HCM Multiples feature 1, 2, 3 or 4 multi-heads in a recessed housing. Multi-heads have 0-70° tilt and 355° rotation with 25° Narrow Flood optic included and 15° Spot, 40° Flood available for field change. HCM is 90CRI in 2700K, 3000K, 3500K, 4000K with 1200 lumens per head (nominal). New construction and remodel housings are IC rated in matte white or matte black with Chicago Plenum, emergency and WaveLinx options. HCM is 120-277V with 1%-100% 0-10V dimming and 1%-100% phase dimming capable.

Otilla Small Category:Plaster-in Collection,Wall-Mounted The OTILLA Small Wall Lamp, crafted from BYIBA, features a modern parallelogram design that appears to float off the wall, emitting soft, indirect light from its back. This elegant fixture, weighing 4.19 lbs (1.9 kg), operates with a 16W LED light source and is available in 2700K, 3000K, and 4000K color temperatures with a high CRI of 90, ensuring excellent light quality. Customizable in finishes such as paintable CRISTALY®, corten, or oxide, it’s designed for slim driver compatibility and offers optional accessories like an emergency kit, making it both versatile and stylish for contemporary interiors.

The CLDF is an IP65, Wet location, IC-rated luminaire which provides a cost-effective LED clean room lighting solution. Gasketed housing and door frame create a sealed enclosure. The CLDF is available in 1x2, 1x4, 2x2, and 2x4 sizes. Available options such as anti-microbial paint, 90 CRI, MILSTD 461G compliant, and 12W emergency driver. Suitable for biosafety labs rated BSL 1 and 2 (inset doorframe) and biosafety labs rated BSL 3 and 4 (overlap doorframe). Suitable for Class 1/ISO 3 Cleanrooms. For use in insulated ceilings. NSF/ANSI 2 Food Zone, Splash Zone and Non-Food Zone Applications.

The LRCWLis an IP65, IC-rated luminaire which provides a costeffective LED clean room lighting solution. Gasketed housing and door frame create a sealed enclosure. The LRCWL is available in 2x2 and 2x4 sizes. Available options such as anti-microbial paint, 90 CRI, and 12W emergency driver. Suitable for ISO 5 Cleanrooms. This fixture was designed for healthcare facilities, cleanrooms, and any insulated ceilings.

The CLDFR is an IP65, Wet location, IC-rated luminaire featuring a combination of 630nm red and white LEDs for vivarium applications. Gasketed housing and door frame create a sealed enclosure. The CLDF is available in 1x2, 1x4, 2x2, and 2x4 sizes. Available options such as anti-microbial paint, 90 CRI, MILSTD 461G compliant, and 12W emergency driver. Suitable for biosafety labs rated BSL 1 and 2 (inset doorframe) and biosafety labs rated BSL 3 and 4 (overlap doorframe). Suitable for Class 1/ISO 3 Cleanrooms. For use in insulated ceilings. NSF/ANSI 2 Food Zone, Splash Zone and Non-Food Zone Applications.

Laguna 1 Suspended delivers refined architectural lighting with advanced optical performance, featuring a minimalist 1.5" aperture and low-profile form. The Point Source Louver (PSL) optics provide a deeper louver and “extra quiet” visual experience. Engineered to meet or exceed WELL Building standards for glare control, it combines aesthetics with comfort. The fixture offers a readily accessible integral driver and a unique slider optic removal system for effortless installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White come standard. Proudly crafted in Huntington Beach, CA and BABA compliant in most configurations.

The LGA-1R-LP Recessed LoPro delivers refined visual comfort and superior performance with Point Source Louver (PSL) optics. PSL offers an 80° deeper louver for an “extra quiet” visual experience—both designed to meet or exceed WELL Building glare standards. This low-profile fixture features a minimalist 1.5" aperture and supports a variety of ceiling integration options, including Trim Flange, Spackle Flange, multiple Grid Lay-in and Tegular systems, Bolt Slot, and Armstrong Interlude/USG Identitee. An innovative slider optic removal system ensures easy installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. Specified Lumen Outputs (SLO) available. Proudly crafted in Huntington Beach, CA and BABA approved in most configurations.

• Innovative Microstructure EdgeTech OpticsTM delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control, Diffused (Lambertion) optics. • MEO allows for minimalistic 3” Aperture fixtures with extremely low profiles. • PRO optics available with Asymmetric, Wide and Narrow distributions. • Individually controlled Direct and Indirect MEO optics and lumen outputs. • Wall Mount or Rotational Arm Mount • Innovative Patent Pending Tool-less “Push to Eject” system alows for easy installation and serviceability. • Individual fixture lengths and seamless continuous rows with no lens breaks, pixilation or hotspots up to 400 feet. • Integral Driver, Remote Driver, In-Canopy Driver and In-Canopy Emergency Driver options. • Specified Lumen Outputs (SLO) available • Proudly crafted in Huntington Beach, CA - USA

The HTGDU-1P features cutting-edge Microstructure EdgeTech Optics™ for unmatched optical control and seamless, uniform illumination. Offering a minimalist 1.5" aperture and ultra-low profile, it supports a range of customizable optics - including Batwing, Glare Control, Diffused, Room Fill, Ceiling Wash, and Wall Wash. Individually controlled direct and indirect MEO™ optics deliver tailored lumen output. Available with custom powder coat finishes, tool-free installation, and flexible mounting options including 361° rotational aircraft cable. Choose from integral, remote, or emergency drivers, with SLO outputs up to 1480 lm/ft. Available as 90+ CRI standard, with Tunable White available. Made in Huntington Beach, CA and BABA compliant in most configurations.

Innovative Microstructure EdgeTech OpticsTM creates precise optic control, seamless illumination and uniformity with no pixilation or hot spots. Specify Batwing, Glare Control or Diffused Optics. MEO allows for minimalistic 1.5” Aperture fixtures with extremely low profiles Individually controlled Direct and Indirect MEO Optics and Lumen Outputs. Individual fixture lengths and seamless continuous runs with no lens breaks, pixilation or hotspots up to 400 feet. Integral Driver, Remote Driver, In-Canopy Driver and In-Canopy Emergency Driver options. No visible fasteners Custom powder coat and anodized finishes Specified Lumen Outputs (SLO) available