160 manufacturers · 18,987 products

Via Splash, with its IP66 rating, offers energy-efficient architectural lighting for demanding, wet locations (including wash down) in both exterior and interior applications. The simple housing of extruded aluminum is fully sealed and available in lengths up to 12'. suitable for temperatures from -20ºC/-4ºF to 40ºC/104º, Via Splash can be installed in pendant, surface, wall, or pendant applications. Choose from Direct, Direct/Indirect, and Asymmetric light distributions. Light output ranges from 500 to 2000 lumens per foot, with color temperatures up to 5000K and efficacies up to 116 LPW. Multiple enclosure, electrical, emergency, and control options are available.

Voila 2" downlights and wall washers are available in round and square apertures with Open Frame, IC and CCEA housings, all requiring less than 4" of plenum depth. Downlights adjust 30º vertically with screw thread mechanism and rotate 360º horizontally. Using HyFlex optics, field-interchangeable beam angles range from 10º to 90º. Integral drivers are available for 0-10V, ELV or Triac dimming and can be replaced through the 2" aperture. Remote drivers are available for other protocols, emergency operation, and ChromaWerx Sola and Duo. Die-cast baffles are offered in 0.5" and 1.0" depth with trim or trimless options and multiple finishes. Pre-set luminaire light output is available from up to 1340 lumens. Voila 2" downlights has an IP44 rating.

Via Splash, with its IP66 rating, offers energy-efficient architectural lighting for demanding, wet locations (including wash down) in both exterior and interior applications. The simple housing of extruded aluminum is fully sealed and available in lengths up to 12'. suitable for temperatures from -20ºC/-4ºF to 40ºC/104º, Via Splash can be installed in pendant, surface, wall, or pendant applications. Choose from Direct, Direct/Indirect, and Asymmetric light distributions. Light output ranges from 500 to 2000 lumens per foot, with color temperatures up to 5000K and efficacies up to 116 LPW. Multiple enclosure, electrical, emergency, and control options are available.

Togo provides generous ambient illumination from a minimal and elegant ring form. Nestled in a crisp 4" high opaque band, the distinctive, annular diffuser glows inwardly. The diffuser’s softly rounded compound curve lends Togo a slender appearance. Available in 18", 24", 36" and 48" diameters. Togo delivers efficient, widesoread, direct/indirect illumination (65/35) with spacing criteria of 1.6 and a range of light outputs. Togo’s outer housing of extruded aluminum is welded and buffed to a seamless band that can be painted in our nine standard finishes, or an RAL custom color, to coordinate with virtually any interior finish. The Togo driver mounts remotely, either above or below the ceiling. In addition to a conventional power cord, Togo also offers an ultra-clean mounting detail with integrated power and suspension cables. Controls include dimming to 1% in 0-10V, line voltage, and digital protocols. Night light and emergency circuiting are available. Togo supports the full range of ChromaWerx Sola, Duo, and Quadro options for tunable white and RGBW expressive color.

Laguna 1 Suspended delivers refined architectural lighting with advanced optical performance, featuring a minimalist 1.5" aperture and low-profile form. The Point Source Louver (PSL) optics provide a deeper louver and “extra quiet” visual experience. Engineered to meet or exceed WELL Building standards for glare control, it combines aesthetics with comfort. The fixture offers a readily accessible integral driver and a unique slider optic removal system for effortless installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White come standard. Proudly crafted in Huntington Beach, CA and BABA compliant in most configurations.

The LGA-1R-LP Recessed LoPro delivers refined visual comfort and superior performance with Point Source Louver (PSL) optics. PSL offers an 80° deeper louver for an “extra quiet” visual experience—both designed to meet or exceed WELL Building glare standards. This low-profile fixture features a minimalist 1.5" aperture and supports a variety of ceiling integration options, including Trim Flange, Spackle Flange, multiple Grid Lay-in and Tegular systems, Bolt Slot, and Armstrong Interlude/USG Identitee. An innovative slider optic removal system ensures easy installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. Specified Lumen Outputs (SLO) available. Proudly crafted in Huntington Beach, CA and BABA approved in most configurations.

• Innovative Microstructure EdgeTech OpticsTM delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control, Diffused (Lambertion) optics. • MEO allows for minimalistic 3” Aperture fixtures with extremely low profiles. • PRO optics available with Asymmetric, Wide and Narrow distributions. • Individually controlled Direct and Indirect MEO optics and lumen outputs. • Wall Mount or Rotational Arm Mount • Innovative Patent Pending Tool-less “Push to Eject” system alows for easy installation and serviceability. • Individual fixture lengths and seamless continuous rows with no lens breaks, pixilation or hotspots up to 400 feet. • Integral Driver, Remote Driver, In-Canopy Driver and In-Canopy Emergency Driver options. • Specified Lumen Outputs (SLO) available • Proudly crafted in Huntington Beach, CA - USA

The HTGDU-1P features cutting-edge Microstructure EdgeTech Optics™ for unmatched optical control and seamless, uniform illumination. Offering a minimalist 1.5" aperture and ultra-low profile, it supports a range of customizable optics - including Batwing, Glare Control, Diffused, Room Fill, Ceiling Wash, and Wall Wash. Individually controlled direct and indirect MEO™ optics deliver tailored lumen output. Available with custom powder coat finishes, tool-free installation, and flexible mounting options including 361° rotational aircraft cable. Choose from integral, remote, or emergency drivers, with SLO outputs up to 1480 lm/ft. Available as 90+ CRI standard, with Tunable White available. Made in Huntington Beach, CA and BABA compliant in most configurations.

Innovative Microstructure EdgeTech OpticsTM creates precise optic control, seamless illumination and uniformity with no pixilation or hot spots. Specify Batwing, Glare Control or Diffused Optics. MEO allows for minimalistic 1.5” Aperture fixtures with extremely low profiles Individually controlled Direct and Indirect MEO Optics and Lumen Outputs. Individual fixture lengths and seamless continuous runs with no lens breaks, pixilation or hotspots up to 400 feet. Integral Driver, Remote Driver, In-Canopy Driver and In-Canopy Emergency Driver options. No visible fasteners Custom powder coat and anodized finishes Specified Lumen Outputs (SLO) available