160 manufacturers · 18,987 products

Via Splash, with its IP66 rating, offers energy-efficient architectural lighting for demanding, wet locations (including wash down) in both exterior and interior applications. The simple housing of extruded aluminum is fully sealed and available in lengths up to 12'. suitable for temperatures from -20ºC/-4ºF to 40ºC/104º, Via Splash can be installed in pendant, surface, wall, or pendant applications. Choose from Direct, Direct/Indirect, and Asymmetric light distributions. Light output ranges from 500 to 2000 lumens per foot, with color temperatures up to 5000K and efficacies up to 116 LPW. Multiple enclosure, electrical, emergency, and control options are available.

Voila 2" downlights and wall washers are available in round and square apertures with Open Frame, IC and CCEA housings, all requiring less than 4" of plenum depth. Downlights adjust 30º vertically with screw thread mechanism and rotate 360º horizontally. Using HyFlex optics, field-interchangeable beam angles range from 10º to 90º. Integral drivers are available for 0-10V, ELV or Triac dimming and can be replaced through the 2" aperture. Remote drivers are available for other protocols, emergency operation, and ChromaWerx Sola and Duo. Die-cast baffles are offered in 0.5" and 1.0" depth with trim or trimless options and multiple finishes. Pre-set luminaire light output is available from up to 1340 lumens. Voila 2" downlights has an IP44 rating.

Via Splash, with its IP66 rating, offers energy-efficient architectural lighting for demanding, wet locations (including wash down) in both exterior and interior applications. The simple housing of extruded aluminum is fully sealed and available in lengths up to 12'. suitable for temperatures from -20ºC/-4ºF to 40ºC/104º, Via Splash can be installed in pendant, surface, wall, or pendant applications. Choose from Direct, Direct/Indirect, and Asymmetric light distributions. Light output ranges from 500 to 2000 lumens per foot, with color temperatures up to 5000K and efficacies up to 116 LPW. Multiple enclosure, electrical, emergency, and control options are available.

Togo provides generous ambient illumination from a minimal and elegant ring form. Nestled in a crisp 4" high opaque band, the distinctive, annular diffuser glows inwardly. The diffuser’s softly rounded compound curve lends Togo a slender appearance. Available in 18", 24", 36" and 48" diameters. Togo delivers efficient, widesoread, direct/indirect illumination (65/35) with spacing criteria of 1.6 and a range of light outputs. Togo’s outer housing of extruded aluminum is welded and buffed to a seamless band that can be painted in our nine standard finishes, or an RAL custom color, to coordinate with virtually any interior finish. The Togo driver mounts remotely, either above or below the ceiling. In addition to a conventional power cord, Togo also offers an ultra-clean mounting detail with integrated power and suspension cables. Controls include dimming to 1% in 0-10V, line voltage, and digital protocols. Night light and emergency circuiting are available. Togo supports the full range of ChromaWerx Sola, Duo, and Quadro options for tunable white and RGBW expressive color.

The CGSB service from below panel is a perfect solution where the aesthetically pleasing look of a fully luminous panel is desired, but serviceability access from below the ceiling is required. The CGSB is fully configurable, allowing for flexibility in design for light levels, color temperatures, dimming options to 1%, connected control systems, emergency and much more. Additionally, CGSB leverages a housing design to fit into most plenum spaces making it a great solution for K-12 schools, general healthcare spaces like lobbies, corridors, and any other space that requires a simple wipe down lens with accessibility from below. The CGSB delivers the perfect combination of a smooth frosted panel with the feature of a room side access door to meet any service from below specification requirements.

The FPX provides the high performance and aesthetic appeal of a flat panel while also being optimized for integrated sensors, emergency battery packs and multiple control options. The low-profile design is ideal for shallow plenum grid ceilings or surface mounting. The integrated grid clips enable installation speed and flexibility. FPX is an excellent lighting solution for commercial office spaces, schools, healthcare and retail merchandising areas.

The CGTX series is a fully configurable LED panel designed for today’s world of increasingly complex lighting and control needs. CGTX offers comprehensive solutions including integrated controls, emergency, high lumen output, 90+ CRI and 1% dimming options. Its low profile back-lit design ensures uniform illumination that fits shallow plenums with room to spare. The CGTX is part of the robust CGT family series and ideal for schools, offices, general healthcare, and other commercial spaces.

V6 LED DUAL SELECTABLE BACKLIT FLAT PANEL BUY AMERICA OPTION The PANELUME® SERIES JBPV6 is the next generation in flat panel technology. Utilizing an array of LEDs to back light the panel, this design eliminates the halo effect while achieving perfect light uniformity. The unit is available in a 1x4, 2x2 and 2x4 and features a dual adjustable configuration (wattage and color temperature). Options include emergency battery packs and a Buy America Compliant version.

"GEN 5" - 2x2/2x4, LED, CENTER LENS, VALUE SERIES BUY AMERICA OPTION The J3922G5/J3924G5 COMFORT-LUME® Series is our Generation 5 version of our popular Value Series troffer. Available in a 2x2 and 2x4 configuration, each unit features a dual adjustable configuration which allows the user to select from three (3) power levels and three (3) color temperatures catering to their jobsite needs. 0-10V dimming is standard. An emergency battery pack, flange kit, surface kit and cable kit are offered as options. A Buy America Compliant version is available.

“GEN 2” - 2⅜” x 3” LED DUAL SELECTABLE WRAP – ADA BUY AMERICA OPTION The CORRI-LUME® II GEN 2 LED Series 4311SX wrap is a slim cost-effective wrap in a small profile. The unit is constructed out of a steel body with a PMMA lens and features a dual selectable platform, wattage and color temperature, for jobsite versatility. Dimming is standard with options for Buy America Compliancy, passive infrared sensor, emergency battery pack, on board dimming control and Bluetooth control. These luminaires are designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. ADA Compliant.

"GEN 3" - 3” x 3½” LED DUAL SELECTABLE WRAP – ADA BUY AMERICA OPTION The CORRI-LUME® III GEN 3 LED Series 4321G3 is constructed out of a steel body with a PMMA lens. The unit features a dual selectable platform, wattage and color temperature, for jobsite versatility. Dimming is standard with options for Buy America Compliancy, internal microwave sensor, passive infrared sensor, emergency battery pack, on board dimming control and Bluetooth control. These luminaires are designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. ADA Compliant.

“GEN 2” - 7⅛” x 2⅞” CEILING WRAP BUY AMERICA OPTION THE CONTEMPO® III GEN2 LED is a cost-effective versatile ceiling wrap built with quality components assuring a long trouble free life. The unit is available in a 48” nominal size and now features a dual adjustable configuration (wattage and color temperature). 0-10V dimming is standard. Options include a remote emergency battery pack and sensor controls. An internal microwave sensor is available and easily programmable with a remote to meet the project conditions. Additional options include PIR sensor, Buy America Compliancy and emergency packs.

2x2/2x4 LED RECESSED SKYLIGHT BUY AMERICA COMPLIANT The LYTEGRESS® Series 9022V7-9024V7 is a new version of the traditional skylight luminaire. The perimeter of the regress trim is precision constructed of heavy gauge steel with tightly welded corners and matte powder coat finish to maintain a clean look. The luminaire portion is built with a heavy duty extruded aluminum frame with a highly durable frosted lens to complete the faux skylight design. Available in both 2x2 and 2x4 configurations, two depths and two regress styles. The unit features three field adjustable wattages and color temperatures, catering to any jobsite needs. 0-10V dimming is standard. Optional emergency battery packs and flange kits are available.

V7 LED ARCHITECTURAL FLAT PANEL The PANELUME® AFP SERIES 9122V7-9124V7 combines the low-profile nature of a flat panel with an architectural lens, constructed of high transmission clear acrylic, printed with patterns to create visual interest. The lens is supported via clips to the flat panel and can be customized to meet a project’s needs. The flat panel utilizes an array of LEDs to back light the panel, this design eliminates the halo effect while achieving perfect light uniformity with no visible pixelation. The unit is available in a 2x2 and 2x4 in a dual adjustable configuration (wattage and color temperature). Buy America Compliant. Options include an emergency battery pack.

V7 LED DUAL SELECTABLE BACKLIT FLAT PANEL BUY AMERICA OPTION The PANELUME® SERIES JBPV7 is the next generation in flat panel technology. Utilizing an array of LEDs to back light the panel, this design eliminates the halo effect while achieving perfect light uniformity. Efficiencies are increased netting more lumens per watt and energy savings for any application. The unit comes standard with 0-10V dimming capability and a dual selectable platform, wattage and color temperature, on each for jobsite versatility. Options include an emergency battery pack and Buy America Compliancy.

4 1⁄2" x 4” LED DUAL SELECTABLE STAIRWAY WRAP BUY AMERICA OPTION The CORRITEMPO® VII Series 4324 is a stairwell wrap that is both versatile and cost-effective. The unit features a dual adjustable configuration which allows the user to select three (3) power levels and three (3) color temperatures to cater to the jobsite needs. An internal microwave sensor is available and easily programmable with a remote to meet the project conditions. Additional options include Buy America Compliant and emergency packs.

6¾” CEILING/PENDANT WRAP BUY AMERICA COMPLIANT THE CONTEMPO® I LED is a versatile ceiling/pendant wrap built with quality components assuring a long trouble free life. Now available in LED, the unit can be specified with numerous lumen and color temperature options to satisfy any project requirement. An optional emergency battery backup is available. Standard sizes include 2’, 4’ and 8’.

4½” WIDE ADA SOFT SQUARE WRAP BUY AMERICA COMPLIANT The CORRITEMPO® IV LED is a wrap suitable for wall or ceiling mounting. The lens is constructed out of a one-piece heavy gauge extruded smooth white acrylic, that wraps itself around the LED engine compartment. This design allows illumination in all directions, making it ideal for many different applications. Several lumen packages and color temperatures are offered to suit any need. Additionally, there are a multitude of options including an emergency battery pack, grounded convenience outlet and occupancy sensor. CORRITEMPO IV® LED is an ADA compliant luminaire, available in soft square and curved versions.

4½" WIDE WALL WRAP BUY AMERICA COMPLIANT The CORRITEMPO II® LED is a functional and versatile wall mounted wrap able to satisfy any illumination challenge. A “U” shaped lens allows the LED light engine to illuminate in all directions, making it ideal for any general lighting application. Several lumen packages and color temperatures are offered to suit any need. Additionally, there are a multitude of options including an emergency battery pack, grounded convenience outlet and occupancy sensor to make the CORRITEMPO II® LED a perfect choice for any project. An ADA version and a version with an Energy Star LED light engine are also available.

4½" WIDE ADA WALL WRAP BUY AMERICA COMPLIANT The CORRITEMPO II® LED is a functional and versatile wall mounted wrap able to satisfy any illumination challenge. A “U” shaped lens allows the LED light engine to illuminate in all directions, making it ideal for any general lighting application. Several lumen packages and color temperatures are offered to suit any need. Additionally, there are a multitude of options including an emergency battery pack, grounded convenience outlet and occupancy sensor to make the CORRITEMPO II® LED a perfect choice for any project. An ADA version and a version with an Energy Star LED light engine are also available.

4⅝” X 4¼” Wrap BUY AMERICA COMPLIANT The VANDALEX® LED is a vandal resistant wrap suitable for wall or ceiling mounting. The unit is constructed of a die formed 16-gauge steel body. The lens is a one-piece heavy gauge precision extruded of clear, light stabilized polycarbonate LEXAN®, with prismatic bottom and longitudinal side prisms directing side light upward, out of the glare zone. LEXAN® has extremely high impact strength and is almost impossible to break, removable by removal of the end caps. Several lumen packages and color temperatures are offered to suit any need and there are a multitude of options including an emergency battery pack, occupancy sensor and tamperproof screws. A version with an Energy Star LED light engine is available.

The HALO LCR Series comes in sizes 2", 4", 6" and 8" wall wash and downlights. This high-powered LED module installs without the use of a recessed housing, reducing time and expense on remodel or new construction. The downlight has a wide distribution pattern ideal for general area illumination and the wall wash illuminates a vertical surface with uniform brightness. The LCR series comes with dual dimming as standard and is designed for residential, mixed-use, and commercial spaces. The LCR has ultimate flexibility with selectable color temperature and lumens. During installation select the perfect color temperature for your space with 6 color temperatures between warm (2700K) to daylight (6500K). Depending on your ceiling height or desired light level choose from several lumen options. The LCR Series features an emergency battery option and designer trims in smooth or baffle.

The Fail-Safe FCT LED combines maximum security construction features with energy saving technology. This low profile surface mounted luminaire has a clamshell housing, security lensing and tamper-resistant fasteners to maximize impact-resistance and prevent contraband concealment and unauthorized fixture penetration. The fixture can be ceiling or wall-mounted. An emergency battery pack is available as an option. It is UL/CUL listed for damp locations.

The Corelite Iridium i3 is the latest addition to the Iridium family with a focus on performance and affordability. This curvilinear direct/indirect suspended luminaire offers a wide range of distributions and lumen outputs for individual or continuous row applications. The Iridium i3 is also one the highest performing luminaires in its class with efficacies up to 158 lumens per watt! Optional features such as 90+ CRI, tunable white with VividTune, integrated sensors, and emergency options allow this fixture to meet specific project needs. The Iridium i3 is well suited for commercial office, educational, and healthcare facilities.

Modern single drum LED pendant features LumaFuse™ laminated fabric/acrylic shade that is durable and easy to clean. Stepped white bottom acrylic diffuser disperses the light evenly. Available in five sizes and two shade colors. User selectable color temperature. Options: emergency battery back-up, motion sensor or emergency battery back-up with motion sensor

RSL11 (0–10V LUMINAIRE) FEATURES - Wattage Selectable: 15W, 18W, 20W - Color Temperature Selectable: 2700K, 3000K, 3500K, 4000K, 5000K - CRI: 90+ - Voltage/Dimming: 120–277V (0–10V) - Visual Comfort: Glare control lens - Emergency: 8W EM

RSL4 (0–10V LUMINAIRE) FEATURES - Wattage Selectable: 8W, 10W, 12W - Color Temperature Selectable: 2700K, 3000K, 3500K, 4000K, 5000K - CRI: 90+ - Voltage/Dimming: 120–277V (0–10V) - Visual Comfort: Glare control lens - Emergency: 8W EM

Model#: UVK-3000XX The Vekter with Adjustable Extended Arm is a wedge-shaped, low-profile, wall-mounted luminaire designed specifically for downlight applications where extended reach and precise aiming are required. This variant features an elongated adjustable arm, offering greater flexibility in positioning the light source for optimal coverage. It comes equipped with high-powered LEDs and a selection of optics to meet a variety of lighting needs. The Vekter is available with Type II, III, IV, and V light distribution options, allowing for wider spacing and consistent illumination between fixtures. With a Type II optic, spacings of up to 40 feet on center can be achieved while maintaining uniformity that complies with path of egress requirements—delivering energy savings and reduced installation costs. Custom beam configurations are also possible, such as combining Type II and Type IV optics within the same fixture to achieve tailored light distribution. The integral electronic control gear is housed in a waterproof enclosure, and a mounting plate compatible with 3" and 4" octagonal junction boxes is included. Ideal for lighting footpaths, building facades, entrances, and surrounding parking areas, the Vekter with Extended Adjustable Arm offers enhanced reach, precision, and performance in a sleek, durable design.

Model#: UJE-30XXX  Wall luminaires with a selection of light distributions and LED wattages with downward light distributions. The Jet ofers a variety of beam spread options that facilitates wider spacing and even light distribution between the light fixtures. The up/down light versions can be manufactured using different beam spreads for the up and down optics, as well as different wattages upon request. Integral electronic control gear. Mounting plate for 3" and 4" junction box is provided with the fixture. Matching surface mount conduit boxes are available as an option. Custom round pole adapters can be manufactured to suit specific pole diameters for column mounting applications. Please contact the factory for more information For Type II, III & IV distributions, see Tango 29 to 32 surface wall luminaires. This fixture can be provided with an integrated emergency LED driver, please specify as an option

Model#: UVK-300XX  The Vekter with Adjustable Arm is a wedge-shaped, low-profile, wall-mounted luminaire designed specifically for downlight applications. This variant features an adjustable arm that allows for precise aiming, offering greater flexibility in directing light exactly where it’s needed. Equipped with high-powered LEDs and a range of optical options, the Vekter supports Type II, III, IV, and V light distributions. These options enable wider fixture spacing and consistent illumination. With a Type II optic, spacings of up to 40 feet on center can be achieved while maintaining uniformity that meets path of egress requirements—resulting in improved energy efficiency and lower installation costs. The luminaire can also be configured with mixed beam optics, such as combining Type II and Type IV within the same fixture, to achieve customized light distribution. Integral electronic control gear is housed in a waterproof enclosure, and a mounting plate compatible with 3" and 4" octagonal junction boxes is included. Ideal for lighting footpaths, building facades, entrances, and surrounding parking areas, the Vekter with Adjustable Arm delivers targeted performance, versatility, and architectural appeal.

Model#: UVK-30XXX The Vekter is a wedge-shaped, low-profile, wall-mounted luminaire designed specifically for downlight applications. It features high-powered LEDs and a selection of optics to meet a variety of lighting requirements. Available with Type II, III, IV, and V light distribution options, the Vekter enables wider fixture spacing and consistent illumination. With a Type II optic, spacings of up to 40 feet on center can be achieved while maintaining uniformity that complies with path of egress requirements—resulting in energy savings and reduced installation costs. The luminaire can also be configured with mixed beam optics, such as combining Type II and Type IV within the same fixture, to achieve custom light distribution. Integral electronic control gear is housed in a waterproof enclosure, and a mounting plate compatible with 3" and 4" octagonal junction boxes is included. Ideal for lighting footpaths, building facades, entrances, and surrounding parking areas, the Vekter delivers reliable performance, efficiency, and clean architectural styling.

Model#: UJE-3XXXX Wall luminaires with a selection of light distributions and LED wattages with up and downward light distributions. The Jet ofers a variety of beam spread options that facilitates wider spacing and even light distribution between the light fixtures. The up/down light versions can be manufactured using different beam spreads for the up and down optics, as well as different wattages upon request. Integral electronic control gear. Mounting plate for 3" and 4" junction box is provided with the fixture. Matching surface mount conduit boxes are available as an option. Custom round pole adapters can be manufactured to suit specific pole diameters for column mounting applications. Please contact the factory for more information For Type II, III & IV distributions, see Tango 29 to 32 surface wall luminaires. This fixture can be provided with an integrated emergency LED driver, please specify as an option

Model#: USA-3XXXX   A range of small and large circular wall mounted bulkheads with a vandal resistant UV stabilized polycarbonate diffuser. Ideal for numerous indoor or outdoor applications. Sandy has a subtle chamfered frame and it can be given a more striking appearance by way of different grill and visor options. As with all wall mounted luminaires, these fixtures are provided with a special self-healing waterproof cable gland that prevents water entering the fixture after wiring. This fixture can be provided with an integral self diagnosing emergency battery pack.

Egress marker light with 1W or 2W LED for public access, bridges, tunnels, docks, piers, walkways & pathways.

HCM Multiples feature 1, 2, 3 or 4 multi-heads in a recessed housing. Multi-heads have 0-70° tilt and 355° rotation with 25° Narrow Flood optic included and 15° Spot, 40° Flood available for field change. HCM is 90CRI in 2700K, 3000K, 3500K, 4000K with 1200 lumens per head (nominal). New construction and remodel housings are IC rated in matte white or matte black with Chicago Plenum, emergency and WaveLinx options. HCM is 120-277V with 1%-100% 0-10V dimming and 1%-100% phase dimming capable.

The CLDF is an IP65, Wet location, IC-rated luminaire which provides a cost-effective LED clean room lighting solution. Gasketed housing and door frame create a sealed enclosure. The CLDF is available in 1x2, 1x4, 2x2, and 2x4 sizes. Available options such as anti-microbial paint, 90 CRI, MILSTD 461G compliant, and 12W emergency driver. Suitable for biosafety labs rated BSL 1 and 2 (inset doorframe) and biosafety labs rated BSL 3 and 4 (overlap doorframe). Suitable for Class 1/ISO 3 Cleanrooms. For use in insulated ceilings. NSF/ANSI 2 Food Zone, Splash Zone and Non-Food Zone Applications.

The LRCWLis an IP65, IC-rated luminaire which provides a costeffective LED clean room lighting solution. Gasketed housing and door frame create a sealed enclosure. The LRCWL is available in 2x2 and 2x4 sizes. Available options such as anti-microbial paint, 90 CRI, and 12W emergency driver. Suitable for ISO 5 Cleanrooms. This fixture was designed for healthcare facilities, cleanrooms, and any insulated ceilings.

Laguna 1 Suspended delivers refined architectural lighting with advanced optical performance, featuring a minimalist 1.5" aperture and low-profile form. The Point Source Louver (PSL) optics provide a deeper louver and “extra quiet” visual experience. Engineered to meet or exceed WELL Building standards for glare control, it combines aesthetics with comfort. The fixture offers a readily accessible integral driver and a unique slider optic removal system for effortless installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White come standard. Proudly crafted in Huntington Beach, CA and BABA compliant in most configurations.

The LGA-1R-LP Recessed LoPro delivers refined visual comfort and superior performance with Point Source Louver (PSL) optics. PSL offers an 80° deeper louver for an “extra quiet” visual experience—both designed to meet or exceed WELL Building glare standards. This low-profile fixture features a minimalist 1.5" aperture and supports a variety of ceiling integration options, including Trim Flange, Spackle Flange, multiple Grid Lay-in and Tegular systems, Bolt Slot, and Armstrong Interlude/USG Identitee. An innovative slider optic removal system ensures easy installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. Specified Lumen Outputs (SLO) available. Proudly crafted in Huntington Beach, CA and BABA approved in most configurations.

The HTGDU-1P features cutting-edge Microstructure EdgeTech Optics™ for unmatched optical control and seamless, uniform illumination. Offering a minimalist 1.5" aperture and ultra-low profile, it supports a range of customizable optics - including Batwing, Glare Control, Diffused, Room Fill, Ceiling Wash, and Wall Wash. Individually controlled direct and indirect MEO™ optics deliver tailored lumen output. Available with custom powder coat finishes, tool-free installation, and flexible mounting options including 361° rotational aircraft cable. Choose from integral, remote, or emergency drivers, with SLO outputs up to 1480 lm/ft. Available as 90+ CRI standard, with Tunable White available. Made in Huntington Beach, CA and BABA compliant in most configurations.