160 manufacturers · 18,987 products

Via Splash, with its IP66 rating, offers energy-efficient architectural lighting for demanding, wet locations (including wash down) in both exterior and interior applications. The simple housing of extruded aluminum is fully sealed and available in lengths up to 12'. suitable for temperatures from -20ºC/-4ºF to 40ºC/104º, Via Splash can be installed in pendant, surface, wall, or pendant applications. Choose from Direct, Direct/Indirect, and Asymmetric light distributions. Light output ranges from 500 to 2000 lumens per foot, with color temperatures up to 5000K and efficacies up to 116 LPW. Multiple enclosure, electrical, emergency, and control options are available.

Voila 2" downlights and wall washers are available in round and square apertures with Open Frame, IC and CCEA housings, all requiring less than 4" of plenum depth. Downlights adjust 30º vertically with screw thread mechanism and rotate 360º horizontally. Using HyFlex optics, field-interchangeable beam angles range from 10º to 90º. Integral drivers are available for 0-10V, ELV or Triac dimming and can be replaced through the 2" aperture. Remote drivers are available for other protocols, emergency operation, and ChromaWerx Sola and Duo. Die-cast baffles are offered in 0.5" and 1.0" depth with trim or trimless options and multiple finishes. Pre-set luminaire light output is available from up to 1340 lumens. Voila 2" downlights has an IP44 rating.

Via Splash, with its IP66 rating, offers energy-efficient architectural lighting for demanding, wet locations (including wash down) in both exterior and interior applications. The simple housing of extruded aluminum is fully sealed and available in lengths up to 12'. suitable for temperatures from -20ºC/-4ºF to 40ºC/104º, Via Splash can be installed in pendant, surface, wall, or pendant applications. Choose from Direct, Direct/Indirect, and Asymmetric light distributions. Light output ranges from 500 to 2000 lumens per foot, with color temperatures up to 5000K and efficacies up to 116 LPW. Multiple enclosure, electrical, emergency, and control options are available.

Togo provides generous ambient illumination from a minimal and elegant ring form. Nestled in a crisp 4" high opaque band, the distinctive, annular diffuser glows inwardly. The diffuser’s softly rounded compound curve lends Togo a slender appearance. Available in 18", 24", 36" and 48" diameters. Togo delivers efficient, widesoread, direct/indirect illumination (65/35) with spacing criteria of 1.6 and a range of light outputs. Togo’s outer housing of extruded aluminum is welded and buffed to a seamless band that can be painted in our nine standard finishes, or an RAL custom color, to coordinate with virtually any interior finish. The Togo driver mounts remotely, either above or below the ceiling. In addition to a conventional power cord, Togo also offers an ultra-clean mounting detail with integrated power and suspension cables. Controls include dimming to 1% in 0-10V, line voltage, and digital protocols. Night light and emergency circuiting are available. Togo supports the full range of ChromaWerx Sola, Duo, and Quadro options for tunable white and RGBW expressive color.

With a flash of style and a touch of class, Monet makes a lasting impression. Distinctive motifs provide an artistic twist, while vivid color gels and luminous glowing edges complete an energetic design. The Monet family consists of interior sconces, pendants, and ceiling mounts, as well as exterior wall mounts. Efficient, long-lasting LEDs allow Monet to empower a space in a simple, elegant form. Exterior ADA-compliant Monet wall mount luminaires are UL listed for wet locations. This fixture is fully recessed, but surface mount models are also available. Exterior Monet's vibrant face lights the path of egress and is balanced by a matching luminous edge.

The Sebring ADA compliant sconce provides path of egress lighting with sophisticated style. Color gels can add a vivid splash of color to a space and complement our palette of powder coat or metal finishes. Sebring enhances a project by allowing design continuity, inside and out.

With a flash of style and a touch of class, Monet makes a lasting impression. Distinctive motifs provide an artistic twist, while vivid color gels and luminous glowing edges complete an energetic design. The Monet family consists of interior sconces, pendants, and ceiling mounts, as well as exterior wall mounts. Efficient, long-lasting LEDs allow Monet to empower a space in a simple, elegant form. Exterior ADA-compliant Monet wall mount luminaires are UL listed for wet locations. This fixture is surface mounted, but fully recessed models are also available. Exterior Monet's vibrant face lights the path of egress and is balanced by a matching luminous edge.

The Sebring sconce provides a designers "eye" to the world around it. Optional color gels can be provided for a splash of color and to increase visual interest. The fixture can be designed for any application where ADA compliance, path of egress lighting, and sophisticated styling is required. Choose from a palette of painted finishes or choose a brushed aluminum metal finish.

High Bay Emergency Luminaire, steel housing

Unique design that comes with 2 different lens type: Narrow Lens and Wide Lens. Makes it the perfect emergency light for any types of corridors or open Spaces.

Mid-size electrical inverter systems for powering up to 375 to 600 watts of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz sinusoidal emergency power to fixtures up to 1000 feet away.

When is an illuminated handrail not a handrail? When it’s a Guardrail, of course. Guardrails have the same structural requirements as a handrail; however, they’re not subject to ADA or paths of egress compliance. Additionally, the rails must fall within a 39" to 45" AFF height, rather than a handrail’s 34" to 38" AFF height.OurLightrail™ Illuminated Guardrail can be based on specific 3-1/2" diameter symmetric or 4-7/8" x 3-5/16" asymmetric aluminum extrusions. They can also be completely custom designs, which might include stainless steel or bronze construction, or an extrusion specially designed to fit in a unique cap rail. Whichever the preference, the illuminated Guardrail attaches to the structural post assembly, as provided by the railing contractor.

The L2500-EGR Series “Egress” Steplite is an emergency-circuited exterior wall fixture for illuminating doorways and pathways with secondary emergency power sources.

The recessed SL191 Series of signs offer clean styling in a popular size. The extruded aluminum trim features a black polyester finish with copy on white snap-in panels. SL191 Series is LED and available with an emergency battery backup system. This Series may be specified for wet location installations. Many standard copy selections are available with custom options available upon request.

The Emergency Lighting Micro/Mini Inverters are a perfect fit in a distributed emergency lighting systems where emergency LED drivers cannot be used, such as with Type B TLEDs, integral-base lamps, or luminaires with drivers integral to the LED array (e.g. flat panels or UFO high-bays). Remote mounting up to 250 feet.

The Sure-Lites LED Emergency Battery Pack EBPLEDL series allows LED luminaires to be used for emergency lighting when power fails. When a power failure occurs, the EBPELDL switches the luminaire to emergency mode and provides 90 minutes of power for emergency egress lighting. The series are UL924 listed for field retrofit installation and are compatible with Cooper Lighting Solutions LED fixtures. The constant power feature ensures consistent light output for a minimum of 90 minutes. The FirstLink feature with the app results in self-testing and compliance data reporting (via Bluetooth.)

The Sure-Lites LED Emergency Battery Pack EBPLEDL series allows LED luminaires to be used for emergency lighting when power fails. When a power failure occurs, the EBPELDL switches the luminaire to emergency mode and provides 90 minutes of power for emergency egress lighting. The series are UL924 listed for field retrofit installation and are compatible with Cooper Lighting Solutions LED fixtures. The constant power feature ensures consistent light output for a minimum of 90 minutes. The FirstLink feature with the app results in self-testing and compliance data reporting (via Bluetooth.)

The Sure-Lites Emergency Light SEL series is a UL924 code compliant solution designed to run for a minimum of 90 minutes during a power outage. Key features of the series include: thermoplastic housing, long life and maintenance free battery and LED source. The patented external battery disconnect and easy hang features to reduce installation time and cost. The SEL series is designed for indoor commercial or industrial use. And the FirstLink feature with the app for self-testing and compliance data reporting (via Bluetooth.)

The Sure-Lites Emergency Light SEL series is a UL924 code compliant solution designed to run for a minimum of 90 minutes during a power outage. Key features of the series include: thermoplastic housing, long life and maintenance free battery and LED source. The patented external battery disconnect and easy hang features to reduce installation time and cost. The SEL series is designed for indoor commercial or industrial use. And the FirstLink feature with the app for self-testing and compliance data reporting (via Bluetooth.)

The Sure-Lites LED Emergency Battery Pack EBPLEDL series allows LED luminaires to be used for emergency lighting when power fails. When a power failure occurs, the EBPELDL switches the luminaire to emergency mode and provides 90 minutes of power for emergency egress lighting. The series are UL924 listed for field retrofit installation and are compatible with Cooper Lighting Solutions LED fixtures. The constant power feature ensures consistent light output for a minimum of 90 minutes.

The Sure-Lites INVM Series are a single phase, compact design mini inverter systems that provide 175VA to 1100VA emergency power to LED, fluourescent, incandescent and HID lighting loads. PWM/MOSFET technology provides pure sine wave emergency power (clean power) within 8ms to 24ms of transfer time. Field selectable 120/120 or 277/277VAC input/output allow easier installation. The INVM series are UL 924-listed and provide 90 minutes of emergency power for egress lighting. Small cabinet footprints and multiple mounting means including grid ceiling, recessed wall or standard wall mounted for the 175VA units and floor or wall mounting for the 350VA through 1100VA units allow flexibility for building space limitations.

The Sure-Lites High Powered Emergency Light SELHP100R3 series is a UL924 code compliant solution designed for commercial and industrial applications to provide up to 100 feet of egress coverage for a minimum of 90 minutes during a power outage. Key features of the series include: a lithium iron phosphate battery capable of providing up to 3 watts of remote capacity, high-impact thermoplastic housing, adjustable, long-life and maintenance free LED heads, as well as self-diagnostics that perform NFPA required monthly and yearly testing, making this series and ideal solution for 7.5 feet to 24 feet or higher mounting heights. The remote capable versions are fully compatible with SRP/SRM/SRPA LED remotes. The universal 120~277 VAC input and universal junction box mounting pattern reduces installation time and cost.

The Sure-Lites INV-I-S Single Phase inverter is an interruptible, PWM inverter type utilizing IGBT technology with 50ms transfer time. Should utility power fail, the Sure-Lites INV-I-S Single Phase inverter takes over and provides output power to the critical load. Its sealed lead calcium batteries will power emergency lighting circuits for 90 minutes (UL 924). Other run times and voltages are available; please contact your Cooper Lighting Solutions representative.

The APEL is an UL 924 listed emergency light with a minimum of 90 minutes of run time and 17 feet of emergency egress coverage. Key features include LED heads, a no maintenance nickel cadmium battery and a five year fixture warranty. The LED heads are fully adjustable to maximize design flexibility while the compact form factor optimizes aesthetics. The universal j-box mounting pattern and snap fit housing construction significantly reduce installation time. The APELH2 versions have remote capacity capable of powering two additional APWR LED heads.

The Sure-Lites fluorescent EBP will power fluorescent fixture to satisfy emergency path of egress code requirements during a power interruption. When AC power fails, the Sure-Lites EBP automatically switches to emergency mode - providing illumination for at least 90 minutes. The maintenance free and long life nickel cadmium battery generates up to 500 lumens or 1400 lumens in emergency mode depending on model. The EBP series is UL924 listed for field retrofit installation and is compatible with most linear fluorescent lamps and carries a 5 year limited warranty.

When AC power fails, the Sure-Lites Emergency Battery Pack LED (EBP) automatically switches to emergency mode. The EBP maintains illumination of an LED fixture for a minimum of 90 minutes. The product line is UL924 classified for field retrofit installation and has guaranteed compatibility with Cooper Lighting Solutions LED fixtures with accessible LED drivers. The constant power feature ensures consistent light output of the fixture for 90 minutes. The EZ Key and laser test features simplify maintenance and installation. These products are not for use with sealed and gasketed fixtures.

The Sure-Lites Eagle Eye™ self-diagnostics option sets the standard for automatic stand-alone testing of emergency lighting units and battery powered exits.

The Sure-Lites Architectural emergency series (SELA) is a UL924 code compliant solution with a superior aesthetic that eliminates the traditional “bug eye” emergency look. The system features a customizable shroud that can be field painted or covered with wall treatment to allow the fixture to blend into the space. An LED source, nickel cadmium battery and self-diagnostics create 29 feet of emergency egress coverage, eliminate maintenance and reduce the labor required to perform NFPA required monthly testing. The LED heads are adjustable with a patented forward throw optic.

The All Pro Series Remote is the most Economical LED Emergency Light Remote for general purpose applications. The durable, injection molded thermoplastic material resists discoloration due to UV radiation. The mounting plate employs a snap-fit construction to further improve the installation time. The All Pro Series Remote Heads are fully adjustable, insuring that light can be put where it is needed.

The APELMINI is an UL 924 listed emergency light with a minimum of 90 minutes of run time and 17 feet of emergency egress coverage in a compact 5-1/4" by 4-3/4" housing. Key features include LED heads, a no maintenance nickel cadmium battery and a five year fixture warranty. The LED heads are fully adjustable to maximize design flexibility while the compact form factor optimizes aesthetics. The universal j-box mounting pattern and snap fit housing construction significantly reduce installation time. Three conduit entry points offer multiple connection options for easier installation.

Tamperproof screws and screwdriver bits are for use in steel exits and restrict access to internal exit or emergency lighting unit compartments. These products are ideally suited for use in schools, hotels, public places of assembly, and other places where tampering may be an issue; they also increase the likelihood that the product will be functional in an emergency situation.

The Sure-Lites CU2-LED Emergency Light is designed to reduce egress system cost and maintenance as well as improve reliability. Key features include long life LED’s, proprietary optics, and a nickel cadmium battery. The patented easy hang feature reduces installation time and cost.

The Sure-Lites INVSM-S Series is a single phase, compact design inverter that provides 1.0kVA to 2.8kVA of emergency power to HID, LED and all lighting loads. This pulse-width modulated (PWM) inverter utilizes IGBT technology to provide a perfect sine wave (clean power) of emergency AC power with two milliseconds of transfer time. The unit's operating efficiency is 98 percent, which is well above a typical fast transfer inverter. The INVSM-S series is UL 924-listed and provides 90 minutes of emergency power for egress lighting. Standard input / output voltages are 120 VAC or 277 VAC. Other run times and voltages are available; please consult your Cooper Lighting Solutions representative.

The Sure-Lites SELDWA50PS series is an aesthetically pleasing outdoor wall mount emergency light with normally on AC functionality. The architectural die-cast housing is UL924 rated for wet location use, City of Chicago and New York City approved. The SELDWA50PS series is ideal for both outdoor and indoor locations, providing 90-minutes of emergency light when AC power fails and a variety of AC on illumination operations including always-on, dusk-to-dawn sensing, switched-on/off or always-off. Key features include 880 lumen output in AC powered operation and 640 lumens, 50 foot of egress coverage in emergency operation, proprietary rotatable accuLED optics, a maintenance free nickel cadmium battery as well as self-diagnostics that reduce the labor associated with NFPA required testing. The SELDWA50PS is available with temperature ratings of -30 °C to 40 °C or 0 °C to 40 °C. Additionally the SELDWA’s easy hang feature reduces installation time and cost. It is available with a silver, white, black or bronze finish.

The Sure-Lites INV-T Three Phase Series represents the highest performance in uninterruptible technology while the transistorized inverter is providing power protection. Ready for virtually any emergency with this stand by power system, this pulse-width modulated inverter has a two millisecond transfer time. The AC in to AC out operating efficiency is typically 98 percent, well above a typical fast transfer inverter. The internal construction of each cabinet consists of an AC-to-DC battery charger and a DC-to-AC inverter.

The Sure-Lites EBPLEDSD Series is an LED emergency battery pack (EBP) with 7.5, 10 or 14 watts of emergency power. The EBP converts LED fixtures to emergency fixtures w/ 90 minutes of run time. It is UL1310 and CSA 22.2 listed for both factory or field installation. Also, this EBP series is compatible with LED products with 15 to 50 VDC operation.

Wire guards shield exit and emergency lights from impacts, vandalism, and other hazards.By preventing damage, wire guards help extend the lifespan of Exit & Emergency fixtures, reducing the need for frequent replacements and maintenance. Wire guards are all-metal for exits or emergency units. The robust design of 9-gauge coated steel wire ensures exceptional durability and resistance to breakage. Wire guards include mounting hardware for mounting. Wire guards come in various sizes to fit different types of exit and emergency lights. Designed for schools, gymnasiums, and similar spaces needing protection vandalism.

The AP2SQLED30 is the next generation LED square head UL 924 listed emergency light. The AP2QSLED30 provides up to 30 feet of emergency egress coverage for a minimum of 90 minutes of run time. Key features include smaller form factor, higher egress coverage square LED heads compared to older models, a no maintenance nickel cadmium battery and a five year fixture warranty. The LED heads are fully adjustable to maximize design flexibility. The universal j-box mounting pattern, additional conduit entry point and snap fit housing construction significantly reduce installation time.

The Sure-Lites INV-U-S Series is a single phase inverter that provides uninterrupted power. This pulse-width modulated inverter utilizes IGBT technology and has a two millisecond transfer time. The unit's operating efficiency is 98 percent, which is well above a typical fast transfer inverter. The C Series inverter is UL 924-listed and meets NFPA 101 requirements by providing 90 minutes of illumination for emergency egress lighting. Other run times and voltages are available; please consult your Cooper Lighting Solutions representative.

The Sure-Lites EBPLEDC1LV/HV is a LED emergency battery pack with 20V to 50V (LV) or 125V to 200V (HV) output.It converts LED fixtures to emergency fixtures w/ 90 minutes of run time. 20 watts of emergency power equals up to 2600 lumens of illumination during a power outage. It is UL1310 and CSA 22.2 listed for both factory or field installation.

The Sure-Lites Emergency Light SEL series is a UL924 code compliant solution designed to run for a minimum of 90 minutes during a power outage. Key features of the series include: a nickel cadmium battery capable of providing up to 16 watts of remote capacity, polycarbonate housing and heads, long life and maintenance free LED source with proprietary accuLED optics, as well as self-diagnostics that perform NFPA required monthly testing. The remote capable versions are fully compatible with SRP/SRM/SRPA LED remotes. The patented external battery disconnect and easy hang features reduce installation time and cost. The SEL series is designed for indoor commercial or industrial use.

The Sure-Lites SELRA50 series are an aesthetically pleasing recessed ceiling emergency light with adjustable heads that provides up to 50 feet of egress coverage. Provided with both a circular and rectangular trim plate and flush to the ceiling mounting design, the SELRA50 series blends in to ceiling for minimum visual impact and provides 90 minutes of emergency light when AC power fails. Key features includes adjustable heads and a self-diagnostics option that reduces the labor associated with required NFPA testing. It is available with a white finish.

The Sure-Lites Emergency Light XR6C-LED is designed to reduce egress system cost and maintenance as well as improve reliability. Key features include long life LED’s, proprietary adjustable accuLED optics, a nickel cadmium battery and a rugged sheet metal housing. The Patented external battery disconnect and EZ Hang features reduce installation time and cost. This product is City of Chicago compliant and New York City compliant.

The Sure-Lites Architectural Emergency Light is designed to provide superior illumination while blending into the surrounding space. The housing is constructed of die-cast aluminum with an integral refractive polycarbonate lens and advanced optical design, which in conjunction with energy-efficient, long-lasting LEDs provides maximum path of egress lighting performance. The Sure-Lites Architectural Emergency Light is wet listed for temperatures between -30°C and 50°C (-22°F and 122°F) and is available with Eagle Eye™ self diagnostics.

Mounting brackets and shelves simplify installation of Emergency Lighting Units. They include 18-gauge steel brackets and 20-gauge steel shelves and are available in grey, black, and white finishes (specify color when ordering).

The Sure-Lites Emergency Light SEL series is a UL924 code compliant solution designed to run for a minimum of 90 minutes during a power outage. Key features of the series include: lithium batteries capable of providing up to 5 watts of remote capacity, polycarbonate housing and heads, long life and maintenance free LED source with proprietary optics, as well as self-diagnostics that perform NFPA required monthly testing. The remote capable versions are fully compatible with SRP/SRM/SRPA LED remotes. The patented external battery disconnect and easy hang features reduce installation time and cost. The SEL series is designed for indoor commercial or industrial use. They are available in black and white housings, with and without Self-Diagnostics, and with and without extra battery capacity to power additional remotes.

The SELMTG60R5SD is an Architectural grade, recessed, T-Grid mounted emergency light. The 300 lumen LED source will cover up to 60 feet resulting in less total fixtures required. Also, the adjustable recessed heads eliminate the traditional unsightly emergency fixture look. This product is UL924 listed and meets both City of Chicago and NYC construction requirements.

When AC power fails, the Sure-Lites FBP Emergency Battery Pack automatically switches to emergency mode. It maintains illumination of one or two lamps for a minimum of 90 minutes. The series is UL-listed for field retrofit installation and conforms to UL 924.

The Sure-Lites Emergency Light (SEL) series is designed to reduce egress system cost and maintenance as well as improve reliability. Key features include long life LED’s, proprietary adjustable accuLED optics, and a nickel cadmium battery. The Patent Pending easy hang feature reduces installation time and cost.

The Sure-Lites SELMREC series is a UL 924 code compliant emergency light designed to reduce egress system cost and maintenance as well as improve reliability. It is designed to run for a minimum of 90 minutes during a power outage. The recessed mounting creates an architectural appearance and is minimally disruptive to the interior space. Key features include long life LED source with egress coverage up to 60 feet, adjustable metal heads, a nickel cadmium battery as well as a stylish metal housing. The self-diagnostic capability automatically performs NFPA required testing to reduce maintenance labor. This series is City of Chicago and New York City compliant. This series offers remote capability from 4 watts to 10 watts and is compatible with the Sure-Lites SRP/SRM remote series.

The Sure-Lites INV series is a UL Listed stand-alone modified sine wave output inverter designed to provide power to designated emergency lighting fixtures. In a power loss situation, the unit will supply 20/35/55/110/220/375/600 Watts of power from the onboard battery supply. It works in conjunction with incandescent, LED, and fluorescent lamps and fixture types and will automatically run switched, normally-on, or normally-off designated emergency fixtures. The INV series is ideal for applications requiring an emergency source for lighting arrangements that utilize multiple lamp and fixture types. Installation options include surface mount, recessed or T-grid. The series has a self-diagnostics option and comes with a three-year product warranty and seven-year pro-rated battery warranty.

The Sure-Lites SELDWA series is UL924 wet location code compliant, die cast aluminum, architectural grade, wet location and City of Chicago approved Emergency Light. Featuring an aesthetically pleasing look, it eliminates traditional unsightly emergency light trauma. The SELDWA is also perfect for indoor applications where an architectural appearance is desired. Key features include maintenance free LED’s with 100 lumen output (superior to a 9 watt incandescent source) or a 300 lumen output (superior to any 12 watt incandescent source), proprietary rotatable accuLED optics, a maintenance free nickel cadmium battery as well as self-diagnostics that reduce the labor associated with NFPA required testing. The SELDWA is available with temperature ratings of -20 °C to 55 °C or 0 °C to 40 °C. Additionally the SELDWA’s easy hang feature reduces installation time and cost. It is available with a silver, white, black or bronze finish.

The Sure-Lites Emergency Light SELM series is a UL924 code compliant solution designed to run for a minimum of 90 minutes during a power outage. Key features of the series include: a nickel cadmium battery capable of providing 4 watts to 16 watts of remote capacity, steel housing and aluminum heads, long life and maintenance free LED source with proprietary accuLED optics, as well as self-diagnostics that perform NFPA required monthly testing. The base units are fully compatible with SRP/SRM/SRPA LED remotes. The patented external battery disconnect and easy hang features reduce installation time and cost. The SELM series is designed for indoor commercial or industrial use and is City of Chicago and New York City compliant.

The vandal shield is made of durable, high-impact, clear polycarbonate material. Extra layer of protection from vandalism and airborne objects, preserving visibility and emergency light functionality. Designed for schools, gymnasiums, and similar spaces needing defense against flying objects and vandalism.

The APVTS LED series is contractor grade industrial luminaire that combines the rugged, wet location rated construction of a vaportite with selectable CCT and lumen output. The APVTS comes in 4ft and 8ft sizes, performance up to 11,500 lumen, 120-277V multi-volt input, emergency back-up and sensor options. The linear form, sealed and gasketed housing and high impact polycarbonate lens makes the APVTS fit for interior and exterior applications such as parking garages, canopy, warehouse, and light commercial environments.

The CGSB service from below panel is a perfect solution where the aesthetically pleasing look of a fully luminous panel is desired, but serviceability access from below the ceiling is required. The CGSB is fully configurable, allowing for flexibility in design for light levels, color temperatures, dimming options to 1%, connected control systems, emergency and much more. Additionally, CGSB leverages a housing design to fit into most plenum spaces making it a great solution for K-12 schools, general healthcare spaces like lobbies, corridors, and any other space that requires a simple wipe down lens with accessibility from below. The CGSB delivers the perfect combination of a smooth frosted panel with the feature of a room side access door to meet any service from below specification requirements.

The FPX provides the high performance and aesthetic appeal of a flat panel while also being optimized for integrated sensors, emergency battery packs and multiple control options. The low-profile design is ideal for shallow plenum grid ceilings or surface mounting. The integrated grid clips enable installation speed and flexibility. FPX is an excellent lighting solution for commercial office spaces, schools, healthcare and retail merchandising areas.

The CGTX series is a fully configurable LED panel designed for today’s world of increasingly complex lighting and control needs. CGTX offers comprehensive solutions including integrated controls, emergency, high lumen output, 90+ CRI and 1% dimming options. Its low profile back-lit design ensures uniform illumination that fits shallow plenums with room to spare. The CGTX is part of the robust CGT family series and ideal for schools, offices, general healthcare, and other commercial spaces.

These kits are uniquely designed to fit an abundance of 1' x 2', 1' x 4', 2’ x 2’ and 2’ x 4’ LED and fluorescent recessed troffers in both standard and emergency versions. They specifically accommodate Metalux, Fail-Safe, Corelite and Neo-ray product lines in addition to other manufacturer’s offerings. Their three piece construction provides a simple means of installing a recessed fixture in any surface mount application while reducing labor time and associated costs. With its clean and simple design its ideal for providing spaces with an aesthetically pleasing solution. The result is an innovative and user-friendly accessory for addressing surface mount applications with an array of fixture choices.

The NECW LED series is an ADA‑compliant linear wall fixture designed for commercial, institutional, and multi‑family environments requiring durable construction, consistent illumination, and a shallow profile suitable for public corridors and walkways. Built with a steel housing and a vandal‑resistant acrylic diffuser, the NECW provides dependable performance with CRI > 90, universal 120/277V operation, and 0–10V dimming to 10% included. The fixture mounts to a 2×4 j‑box or 4" square post and is available in five lengths up to 60". Optional battery backup (available on 426 and larger) supports egress and safety requirements. Wet‑location listing and replaceable LED modules ensure long‑term serviceability. Proudly made in America with BABA‑compliant options always available.