160 manufacturers · 18,987 products

Telesis TEBL series sets new standards in high-performance LED emergency lights. Available in 600 and 1300 lumen models providing corridor spacing up to 117’.

The VRS vandal-resistant shield protects your emergency lighting from both accidental and intentional damage, as well as unauthorized tampering

The Telesis TDCOM Die Cast Aluminum Combination LED Exit and Emergency Light provides an architectural styled solution for applications needing a rugged yet stylish combination unit.

Evenlite’s emergency lighting control device ELCD 1008 is a UL-listed, Branch Circuit Emergency Lighting Transfer Switch (BCELTS) which transfers AC power between two non-synchronous power sources (emergency and normal) to the emergency lighting loads

Curve represents the cutting edge of emergency lighting innovation. With patented concealed LED light sources integrated seamlessly into its elegant, curved housing, Curve achieves a sleek, understated design.

Evenlite’s emergency lighting control device ELCD 924 is particularly suited for use with our central inverters and can turn any lighting fixture into a life-saving emergency egress light source

Evenlite Wireguards provide enhanced protection for emergency lighting equipment from physical damage

The Decor Designer DP series provides a fully recessed, self-contained emergency lighting fixture suitable for ceiling or wall installation

The Décor Designer SM is a sleek designer fixture that combines emergency and night lighting. It provides powerful emergency and normal lighting for over-doors and other exterior locations, with a full 90° cut-off.

The Tufflite H Series provides durable emergency lighting units with the ability to power remote fixture loads.

Tufflite “THZ”Industrial Class 1 Division 2 emergency lighting units are designed for use in Class 1 Division 2, Groups A, B, C, D, Class II Divisions 1&2 Groups E,F,G: T coded T4A, T3B, T3A, T2D, T2A, or T1.

The WeatherWay delivers dependable high-performance egress lighting for both normal and emergency lighting use.

The Décor Designer MM Linear LED combines emergency and night lighting in a sleek, designer fixture.

The PHOENIX series provides a compact self- contained emergency lighting unit with the ability to power remote fixture loads.

The Tufflite S Series provides compact emergency lighting units with the ability to power remote fixture loads.

The Decor DS series provides a self-contained emergency lighting fixture for recessing into suspended grid or lay-in ceiling systems.

Tufflite IXHL Industrial NEMA emergency lighting units are designed for use in hostile areas where oil, water and dust resistant equipment is required.

Aperion APAL delivers high-performance emergency lighting in a sleek, compact, and concealed design.

The Corelite JAYLUM merges affordability and performance in this timeless direct/indirect pendant. The JAYLUM is designed to accompany almost any décor with clean lines and a slim profile. The J2 LED series provides up to 93% downlight using a single LED module to efficiently deliver light to the task at hand. The J3 LED series offers a wide optical distribution with up to 85% uplight and industry-leading performance to meet increasingly stringent building energy requirements. Two lens options, integral daylight/occupancy sensors, integral emergency battery packs, Fifthlight DALI addressability, companion wall-mount and sconce allows this fixture to meet all of your specific project needs. Best of all, the JAYLUM incorporates economically engineered steel-construction and contractor-friendly installation features for which Corelite is known!

The Corelite Iridium i3 is the latest addition to the Iridium family with a focus on performance and affordability. This curvilinear direct/indirect suspended luminaire offers a wide range of distributions and lumen outputs for individual or continuous row applications. The Iridium i3 is also one the highest performing luminaires in its class with efficacies up to 158 lumens per watt! Optional features such as 90+ CRI, tunable white with VividTune, integrated sensors, and emergency options allow this fixture to meet specific project needs. The Iridium i3 is well suited for commercial office, educational, and healthcare facilities.

The AtLite ATLELDWA series is UL924 wet location code compliant, die cast aluminum, architectural grade, wet location and New York City approved Emergency Light. Featuring an aesthetically pleasing look, it eliminates traditional unsightly emergency light trauma. The ATLELDWA is also perfect for indoor applications where an architectural appearance is desired. Key features include maintenance free LED’s with 100 lumen output (superior to a 9 watt incandescent source) or a 300 lumen output (superior to any 12 watt incandescent source), proprietary rotatable accuLED optics, a maintenance free nickel cadmium battery as well as self-diagnostics that reduce the labor associated with NFPA required testing. The SELDWA is available with temperature ratings of -20 °C to 55 °C or 0 °C to 40 °C. Additionally the ATLELDWA’s easy hang feature reduces installation time and cost. It is available with a silver, white, black or bronze finish.

The AtLite Emergency Light ATLEM series is a New York City approved UL924 code compliant solution designed to run for a minimum of 90 minutes during a power outage. Key features of the series include: a nickel cadmium battery capable of providing up to 16 watts of remote capacity, steel housing and aluminum heads and LED head options of 100 lumens (superior to 9 watt incandescent), 200 lumens (superior to 12 watt incandescent sources) or 300 lumens of output. The system also includes proprietary accuLED optics, as well as self-diagnostics that perform NFPA required monthly testing and is fully compatible with SRP/SRM/SRPA LED remotes. The patented external battery disconnect and easy hang features reduce installation time and cost. The ATLEM series is designed for indoor commercial or industrial use.

The Rival LED Specification Series meets the standards of architectural requirements while providing many options and accessories to customize any installation.

The RF LED Surface Heads Series provides remote heads (no battery) manufactured in high impact, mar-resistant engineering grade thermoplastic. A highly polished reflector located behind the lamp provides abundant emergency light to the floor when connected to an emergency battery source. Several finishes and lamp styles are available.

The Atlite mini is a UL924 and NYC code compliant LED emergency light available with two or three 80 lumen heads. It's J-box size metal housing is easy to install and creates a minimal presense in the workspace.

The IBAR-M Series clearance bar is a multi-piece, modular, 7" x 2.5" extruded aluminum system. Includes Easyglide Adjustable Eyebolts for top mounting for each modular section. Painted traffic yellow and displays your required message in factory-applied, high-performance red reflective vinyl. Custom paint colors and graphics are available upon request.

The IBAR-C Series clearance bar is a single-piece, 7" x 2.5" extruded aluminum system. Includes Easyglide Adjustable Eyebolts for top mounting. Painted traffic yellow and displays your required message in factory-applied, high-performance red reflective vinyl. Custom paint colors and graphics are available upon request.

The IBAR-C Series clearance bar is a single-piece, 7" x 2.5" extruded aluminum system. Includes Easyglide Adjustable Eyebolts for top mounting. Painted traffic yellow and displays your required message in factory-applied, high-performance red reflective vinyl. Custom paint colors and graphics are available upon request.

The IBAR-M Series clearance bar is a multi-piece, modular, 7" x 2.5" extruded aluminum system. Includes Easyglide Adjustable Eyebolts for top mounting for each modular section. Painted traffic yellow and displays your required message in factory-applied, high-performance red reflective vinyl. Custom paint colors and graphics are available upon request.

SC8DRREM

SC6DRREM

SC4DRREM

GC6DRREM

MXG2PRDREM

MXG2PSDREM

SS6G4CREM

GC4DRREM

GC8DRREM

SS4G4CREM

Remote Capable Dual Adjustable LED Emergency Light

Remote Capable LED Exit/Emergency Light Combination

Single Head Remote LED Emergency Light

Remote Capable LED Exit/Emergency Light Combination

Dual Head Remote LED Emergency Light

LED Exit/Emergency Light Combination

DIFFUSER: Opal White Injection Molded Polycarbonate standard. Optional Frosted Opal Lens (FRO). DRIVER: Universal Voltage 120/277v Electronic Driver with 0-10V dimming. EMERGENCY: Optional Integral or Remote LED Emergency Battery FASTENERS: (4) Stainless steel tamperproof Torx screws to secure lens to backplate. FINISH: Extremely durable oven baked Polyester Powder Coat is Standard.

8'' Round, thin profile, LED ceiling light with edge-lit panel for wide, even light distribution. White acrylic diffuser. Available in three finishes. Optional 90 Minute Emergency Backup Batery available in white finish. Retrofit kits available for 4in. and 6in, ceiling cans (sold seperately).

This 8 watt nickel-cadmium (NiCd) battery backup system is designed for use with the Edge Round 8'' flush mount (sold separately). It provides 90 minutes of power to the Edge Round 8'' flush mount to allow lighting for emergency egress or continuation of key operations during a loss of power.

Modern single drum LED pendant features LumaFuse™ laminated fabric/acrylic shade that is durable and easy to clean. Stepped white bottom acrylic diffuser disperses the light evenly. Available in five sizes and two shade colors. User selectable color temperature. Options: emergency battery back-up, motion sensor or emergency battery back-up with motion sensor

The Sentinel™ Supplemental Rail Light (SRL) allows the addition of a LED based luminaire to new or existing hand and stair rails. The integrated LED lighting modules of the SRL produce light levels that easily meet both IESNA recommendations and local code requirements for egress pathway lighting. The SRL length is field adjustable, up to 2”, to ensure full contact with the vertical uprights, providing a secure and rigid installation. The SRL LED light fixture can be positioned to provide optimum lighting distribution without glare or unwanted light trespass. Available in both symmetrical and asymmetrical distribution patterns, the SRL is the ideal lighting solution for either center or side locations of stair, aisle and pathways. A selection of lighting levels is available with both differing LED sources and spacings of the lighting modules. Fully dimmable, the SRL can provide suitable LED light levels in any ambient light condition.

Tempo’s Sentinel™ Seat Light II is a low voltage, class 2, LED based stairway and aisle lighting luminaire that incorporates a back-lit informational panel. The compact design of the Seat Light II is perfect for live performance auditoriums, cinemas and a wide variety of commercial and institutional applications. Designed to provide a wide and uniform distribution of LED light over a path of egress from a low mounting height, the Seat Light II can also direct patrons and staff via a customizable graphics panel. The LED Seat Light II is extremely durable. Constructed of a two piece die cast aluminum housing with a black anodized finishing treatment along with an impact resistant acrylic lens, the Seat Light II can withstand the harshest interior environments. Utilizing high output, low energy consuming, lighting class LED’s, Seat Light II offers years of maintenance free service.

Cube Architectural 5.5" LED Wall Mount with Emergency Battery Back Up Flood Beam 2700K in Black

Tube Architectural 6" LED Wall Mount with Emergency Battery Back Up Flood Beam 2700K in Black

Tube Architectural 8" LED Wall Mount with Emergency Battery Back Up Flood Beam 2700K in Black

RSL11 (0–10V LUMINAIRE) FEATURES - Wattage Selectable: 15W, 18W, 20W - Color Temperature Selectable: 2700K, 3000K, 3500K, 4000K, 5000K - CRI: 90+ - Voltage/Dimming: 120–277V (0–10V) - Visual Comfort: Glare control lens - Emergency: 8W EM

RSL4 (0–10V LUMINAIRE) FEATURES - Wattage Selectable: 8W, 10W, 12W - Color Temperature Selectable: 2700K, 3000K, 3500K, 4000K, 5000K - CRI: 90+ - Voltage/Dimming: 120–277V (0–10V) - Visual Comfort: Glare control lens - Emergency: 8W EM

Pendant indoor series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. Copper-free aluminum extruded housings and wall-mount arm, and die-cast reflector-mount trim, endcaps and canopy. Copper-free die-cast aluminum heat-sink passive cooling system. - Hi-light transmittance, internally coated, soda-lime pressed glass diffuser, physically and chemically quenched to increase thermal shocks and mechanical resistance. The clear or matte prismatic glass diffusers are available in a variety of standard and custom colors. - Darker reflector colors (e.g. blue, red, etc) have an translucent white coating inside to provide a uniform light output while allowing the colored glass to be an elegant accent. The glass diffuser (to be ordered separately) is suspended by three field-adjustable aircraft cables, 75” long. High-efficiency COB combined with an optimized passive cooling system provides a long LED life. Diffuse light emission. Input voltage: 120-277 V (50 / 60 Hz), integral 0-10 V dimming driver. Optional, integral, emergency battery-pack designed for a minimum operation of 90 minutes (EMPK). Consult factory for custom finishes and non-catalogued CCT (Kelvin) options. Consult factory for special cable lengths (add SCL to part number). 5-year warranty. - Product meets Buy American requirements within ARRA.

Pendant indoor series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. Copper-free aluminum extruded housings and wall-mount arm, and die-cast reflector-mount trim, endcaps and canopy. Copper-free die-cast aluminum heat-sink passive cooling system. - Hi-light transmittance, internally coated, soda-lime pressed glass diffuser, physically and chemically quenched to increase thermal shocks and mechanical resistance. The clear or matte prismatic glass diffusers are available in a variety of standard and custom colors. - Darker reflector colors (e.g. blue, red, etc) have an translucent white coating inside to provide a uniform light output while allowing the colored glass to be an elegant accent. The glass diffuser (to be ordered separately) is suspended by three field-adjustable aircraft cables, 75” long. High-efficiency COB combined with an optimized passive cooling system provides a long LED life. Diffuse light emission. Input voltage: 120-277 V (50 / 60 Hz), integral 0-10 V dimming driver. Optional, integral, emergency battery-pack designed for a minimum operation of 90 minutes (EMPK). Consult factory for custom finishes and non-catalogued CCT (Kelvin) options. Consult factory for special cable lengths (add SCL to part number). 5-year warranty. - Product meets Buy American requirements within ARRA.

Model#: UVK-3000XX The Vekter with Adjustable Extended Arm is a wedge-shaped, low-profile, wall-mounted luminaire designed specifically for downlight applications where extended reach and precise aiming are required. This variant features an elongated adjustable arm, offering greater flexibility in positioning the light source for optimal coverage. It comes equipped with high-powered LEDs and a selection of optics to meet a variety of lighting needs. The Vekter is available with Type II, III, IV, and V light distribution options, allowing for wider spacing and consistent illumination between fixtures. With a Type II optic, spacings of up to 40 feet on center can be achieved while maintaining uniformity that complies with path of egress requirements—delivering energy savings and reduced installation costs. Custom beam configurations are also possible, such as combining Type II and Type IV optics within the same fixture to achieve tailored light distribution. The integral electronic control gear is housed in a waterproof enclosure, and a mounting plate compatible with 3" and 4" octagonal junction boxes is included. Ideal for lighting footpaths, building facades, entrances, and surrounding parking areas, the Vekter with Extended Adjustable Arm offers enhanced reach, precision, and performance in a sleek, durable design.

Model#: UJE-30XXX  Wall luminaires with a selection of light distributions and LED wattages with downward light distributions. The Jet ofers a variety of beam spread options that facilitates wider spacing and even light distribution between the light fixtures. The up/down light versions can be manufactured using different beam spreads for the up and down optics, as well as different wattages upon request. Integral electronic control gear. Mounting plate for 3" and 4" junction box is provided with the fixture. Matching surface mount conduit boxes are available as an option. Custom round pole adapters can be manufactured to suit specific pole diameters for column mounting applications. Please contact the factory for more information For Type II, III & IV distributions, see Tango 29 to 32 surface wall luminaires. This fixture can be provided with an integrated emergency LED driver, please specify as an option