160 manufacturers · 18,987 products

• LED life-cycle of more than 10 years • Quick Installation • Dual-voltage 120 or 277V AC input • Includes long-life Nickel Cadmium battery for UL recognized 90 minute emergency lighting • Fully adjustable lamp-heads • Wall or Ceiling Mount

• Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Innovative, easy installation in minutes • Suitable for wall mount applications • Universal J-box mounting pattern • 120-277V Universal Voltage Operation • 2pcs 1W ultra bright LED lamp heads for emergency mode • Up to 200 lumen output • Built in 3.6V 1000 mAh Ni-MH battery for minimum 90 minutes emergency operation

Limited Warranty: 5 yearsWattage:16W/22W/26W • Size: 12 Inch / 14 Inch / 16 InchColor Temperature: 5 CCT Adjustable 27/35/40/50/65KEfficacy: Up to 80 LPWLumen output: 1312 – 2132 lumen • Triac dimming • External emergency battery backup available

Limited Warranty: 5 yearsWattage: 2×2 24W/30W/36W 2×4 24W/36W/45WColor Temperature: CCT AdjustableEfficacy: Up to 125LPW • 0-10V dimming • Optional accessories: Internal motion sensor/emergency battery backup

Limited Warranty: 5 yearsWattage: 4ft 40WColor Temperature: 3CCT Adjustable 30/40/50KEfficacy: Up to 120 LPWLumen output: 4800 lumen • 0-10V dimming • Optional Internal Motion sensor or emergency battery

• Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Wet location use • Innovative, easy installation in minutes • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 3.6 V 500mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed

Limited Warranty: 10 yearsWattage: 30W/45W/60W/90WColor Temperature: Standard 4000K & 5000KEfficacy: Up to 130LPWLumen output: 3600 – 11600 lumen • 1-10V dimming • Optional accessories: Internal motion sensor/External emergency battery backup

Limited Warranty: 5 yearsWattage Selectable: 26W ( 20%/40%/60%/80%)Color Temperature: 3CCT (30K/40K/50K)Efficacy: Up to 119LPWLumen output: 3000 lumen • 1-10 V dimming • Optional accessories: Internal emergency battery backup

Limited Warranty: 10 yearsWattage selectable: 25W/40W/52W/62W(TWP2) or 40W/62W/80W/100W(TWP2L)Color Temperature: 3CCT 3000K/ 4000K /5000KEfficacy: Up to 140 LPWLumen output:  3,400lm – 11,000lm • 1-10V Dimming • Optional accessories: Photocell/motion sensor/emergency battery backup • Standard DLC 5.1 listed

• Limited Warranty: 10 years • Wattage selectable : 65W/48W/32W/16W (FCWP3) • Color Temperature: 3CCT color temperature adjustable 3000K/4000K/5000K • Efficacy: Up to 151 LPW • Lumen output:  2,454lm – 14,500lm • 1-10V Dimmable • Optional accessories: Internal photocell & internal emergency battery • Premium DLC 5.1

Laguna 1 Suspended delivers refined architectural lighting with advanced optical performance, featuring a minimalist 1.5" aperture and low-profile form. The Point Source Louver (PSL) optics provide a deeper louver and “extra quiet” visual experience. Engineered to meet or exceed WELL Building standards for glare control, it combines aesthetics with comfort. The fixture offers a readily accessible integral driver and a unique slider optic removal system for effortless installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White come standard. Proudly crafted in Huntington Beach, CA and BABA compliant in most configurations.

The LGA-1R-LP Recessed LoPro delivers refined visual comfort and superior performance with Point Source Louver (PSL) optics. PSL offers an 80° deeper louver for an “extra quiet” visual experience—both designed to meet or exceed WELL Building glare standards. This low-profile fixture features a minimalist 1.5" aperture and supports a variety of ceiling integration options, including Trim Flange, Spackle Flange, multiple Grid Lay-in and Tegular systems, Bolt Slot, and Armstrong Interlude/USG Identitee. An innovative slider optic removal system ensures easy installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. Specified Lumen Outputs (SLO) available. Proudly crafted in Huntington Beach, CA and BABA approved in most configurations.

The HTGDU-1P features cutting-edge Microstructure EdgeTech Optics™ for unmatched optical control and seamless, uniform illumination. Offering a minimalist 1.5" aperture and ultra-low profile, it supports a range of customizable optics - including Batwing, Glare Control, Diffused, Room Fill, Ceiling Wash, and Wall Wash. Individually controlled direct and indirect MEO™ optics deliver tailored lumen output. Available with custom powder coat finishes, tool-free installation, and flexible mounting options including 361° rotational aircraft cable. Choose from integral, remote, or emergency drivers, with SLO outputs up to 1480 lm/ft. Available as 90+ CRI standard, with Tunable White available. Made in Huntington Beach, CA and BABA compliant in most configurations.

RS-232 Controlled Relay Panel Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Time proven, reliable, G-E RR7P3 latching relays snap in and have low voltage plug-in connectors Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 10 circuits — 120, 240 or 277volt models available Daisy-chains for unlimited circuitcount Easy set-up, no on-site commissioning or factory start-up required Simple jumper system sets RS-232 addressing Individual or zone control of circuits IP / serial integration with Building Management Systems Automatic load shedding feature standard Brownout / Power outage shut-down standard Built-in emergency override function

RS-232 Controllable Circuit Breaker Panel The SCLC series of RS-232 controlled Load Center uses motorized circuit breakers to offer a labor-saving, one-panel alternative to relay panels. The economical Load Center panels require the least wall space for tight locations and are available in 26 and 41 circuit sizes of 3 phase, 4 wire 208Y/120Vac. Load Center’s are traditional residential panels and are consequently best suited for smaller circuit breaker counts or for applications with limited wall space. The SCLC is more economical than the bigger panelboards, and is a great value for all of the features offered! Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Easy set-up, no on-site commissioning or factory start-up required Simple jumper system sets RS-232 addressing Individual or zone control of circuits IP / serial integration with Building Management Systems Automatic load shedding feature standard Brownout / Power outage shut-down standard Emergency override function standard on every panel.

Retrofit DMX Lighting Control for Square D Panels The RBLC Controller provides a solution for contractors needing DMX control using any Square D cabinet that accepts QO circuit breakers. Designed for indoor or outdoor applications, the RBLC can be ordered with either one or two control boards capable of sequencing 10 or 20 Square D remote controlled breakers. Simply mount the RBLC next to an existing Square D panel, order as many remote controlled breakers as you’d like to sequence, plug-in your new breakers, wire to the control boards and you’re ready for remote one button on/off sequencing of your sound system. Easy! Consists of a lockable, rain tight, Hoffman UL & CSA listed cabinet with the proven LynTec LC-10 lighting control boards and power transformer mounted on an iridited aluminum subchassis.The subchassis allows the interior to be easily removed for rough-in. Just loosen 4 nuts and lift the subchassis to clear the keyhole slots. The smooth walled cabinet provides full flexibility of field mounting and piping options. DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long!

Retrofit DMX Lighting Control Relay Panel Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Reliable Panasonic latching in modules of 4 relays for easy expansion Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 12 circuits — 120, 240 or 277volt models available Daisy-chains for unlimited circuit count control DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long!

Retrofit One-Touch Sequential System Control The MRTS sequencer provides a solution for contractors needing sound system sequencing using any Square D cabinet that accepts QO circuit breakers. Designed for indoor or outdoor applications, the MRTS can be ordered with either one or two control boards capable of sequencing 12 or 24 Square D remote controlled breakers. Simply mount the MRTS next to an existing Square D panel, order as many remote controlled breakers as you’d like to sequence, plug-in your new breakers, wire to the control boards and you’re ready for remote one button on/off sequencing of your sound system. Easy! Consists of a lockable, rain tight, Hoffman UL & CSA listed cabinet with the proven LynTec MS-12 Modular sequencer boards and power transformer mounted on an iridited aluminum subchassis.The subchassis allows the interior to be easily removed for rough-in. Just loosen 4 nuts and lift the subchassis to clear the keyhole slots. The smooth walled cabinet provides full flexibility of field mounting and piping options. Sequential turn on of electrical circuits, reverse sequence off, standard Selectable delay step-rate setting standard Simple set-up, no on-site commissioning required Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Automatic load shedding for emergency shut-down standard Brownout (under-voltage) shut-down for processor protection standard Contact closure inputs for one-touch system control standard Contact closure outputs optional on all panels

One-Touch Sequential System Control Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Reliable Panasonic latching in modules of 4 relays for easy expansion Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 12 circuits — 120, 240 or 277 volt models available Daisy-chains for unlimited circuitcount Sequential turn on of electrical circuits, reverse sequence off, standard Selectable delay step-rate setting standard Simple set-up, no on-site commissioning required Automatic load shedding for emergency shut-down standard Brownout (under-voltage) shut-down for processor protection standard Contact closure inputs for one-touch system control standard Contact closure outputs optional on all panels

One-Touch Sequential System Control The MSLC series utilizes the same Square D remote control breaker (plug-on only) used in our MSP line and can also handle one, two or three pole breakers. Load Center’s are traditional residential panels and are consequently best suited for smaller circuit breaker counts or for applications with limited wall space. The MSLC is more economical than the bigger panelboards, and is a great value for all of the features we’ve built in! Sequential turn on of electrical circuits, reverse sequence off, standard Selectable delay step-rate setting standard Simple set-up, no on-site commissioning required Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Automatic load shedding for emergency shut-down standard Brownout (under-voltage) shut-down for processor protection standard Contact closure inputs for one-touch system control standard Contact closure outputs optional on all panels

One-Touch Sequential System Control The MSP series utilizes remote controlled breakers manufactured by Square D to provide a single panel sequencing solution. The panelboard is big and roomy with lots of space to work (250% more room than a load center), which makes it the electricians’ favorite! The MSP offers a dedicated cabinet for isolated technical grounding, and comes with 200% neutrals to reduce neutral overheating caused by switch-mode power supplies. The MSP series also offers bolt-on breakers as an option to traditional plug-on models, and can control one, two or three pole breakers. Sequential turn on of electrical circuits, reverse sequence off, standard Selectable delay step-rate setting standard Simple set-up, no on-site commissioning required Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Automatic load shedding for emergency shut-down standard Brownout (under-voltage) shut-down for processor protection standard Contact closure inputs for one-touch system control standard Contact closure outputs optional on all panels SurgeX in-panel surge elimination modules – optional

Self-contained, web-enabled remote control relay panels Deal with the manufacturer for quick response on quotes, delivery and support! Panel packages are ready to install, includes hardware and software. Integrated web server and browser interface for remote set-up, operation and monitoring. With patent-pending features no one else has! So easy to set up that no on-site factory commissioning is required. Control relays individually or establish up to 12 zones for grouped operation. Simply point and click for easy zone setup and breaker operation. Built in scheduling program with astronomical clock for timed zone control. Built in contact closure inputs for sensor or wall switch control. Built in IP interface for smart phone, tablet or laptop control and monitoring. Seamless integration into any DMX, sACN, HTTP, Telnet, RS-232 or BacNET (optional) control system. Circuit level load-shedding feature standard. Circuit level sequencing with selectable step-rates standard. Circuit level selectable auto-on egress lighting feature standard (ETL listed UL 924). Optional outbound signaling relay control. Built-in emergency override function standard. Power outage and brownout protection (optional) assures that your circuits never power up or down incorrectly. 120/208 or 277/480 control Locking hinged cover (lock optional) Available in 6 different configurations housing 8-64 relays (8 and 32 relay models shown)

Purpose-built for lighting & video wall installations LynTec’s new LCP panel series is made for lighting and video wall applications. Based on the Square D G3 Powerlink breaker, the LCP brings you the lighting features you need with the performance that you trust. This makes the new LCP series panel one of the most cost-effective and easy-to-use power control options on the market today. DMX, sACN and IP-based Control at Your Fingertips Built-in web server with browser interface. Set up, control and monitor via smart phone, tablet or computer. Interface with any control system that communicates individual circuit addresses in IP, DMX-512, sACN or contact closures for light sensors, motion sensors or switch sets. Your Systems Your Way Enable up to 12 zones with each zone controlled by a unique protocol Create up to four sets of unique DMX-512 or sACN addresses for control Individually control circuits using unique addresses individually assigned or control entire zones using a single DMX or sACN address to free up addresses for other uses. UL-924 Capable for Emergency Ingress/Egress lighting Built-in scheduling program with an astronomical clock that has up to 84 available schedules including Sunrise, Sunset and multiple schedules controlling individual zones for complete customization Fully Customizable 30-84 space, 100-600A MLO and MCB panels as well as narrow profile panels Motorized breakers in 15, 20 and 30 amps, 1, 2 and 3 poles Optional Integrated SPD and SurgeX in-panel surge elimination modules Based on Square D’s latest generation of motorized breaker technology, each breaker is rated for 200,000 on/off/on cycles and has a mean time to failure of 900,000 on/off/on cycles Substantial installation labor savings over any other system available

Remote Setup, Control, and Monitoring in One Panel The most advanced self-contained controllable breaker panel on the market today. The RPC combines all the features you’ve come to expect from LynTec panels with new web enabled control and monitoring capabilities. Based on the G3 PowerlinkTM hardware platform by Square D, the RPC uses the latest remotely operated breakers and can control up to 168 circuit breakers with a single controller. In addition, the RPC’s expanded interface options (DMX, sACN, HTTP, Telnet, RS-232 or BacNET (optional)) allow users to monitor and control the system from any remote location. New programmable software platform (patent pending) can be customized for optimal power management. So simple to set up, no on-site factory commissioning is required. Control circuits individually, or establish up to 12 breaker group zones. Built in scheduling program with astronomical clock for timed zone control. Built in IP browser interface for smart phone, tablet or laptop control and monitoring. Built in contact closure inputs for wall switch or sensor operation. Circuit level load-shedding feature standard. Circuit level sequencing with selectable step-rates standard. Circuit selectable auto-on egress lighting feature standard (ETL listed UL 924) Circuit selectable brown-out (under-voltage) protection standard. High current contactor control via I/O/R card optional. SurgeX in-panel surge elimination modules available as an option. Current monitoring and reporting available as an option. Plug-on control bus strips simplify wiring and installation. 120/208V, 240V or 277/480V operation. 200% Neutrals standard 225A Main Standard (150A to 400A or MLO versions optional) Easy setup for sequential system control of audio systems or individual circuit control of non-dimmed lighting circuits. The LynTec isolated technical ground bar reduces electrical noise and improves sound system performance.

Two free white wings. Free to settle on the walls, free to cling to the ceilings, free to show off vertical, horizontal, inclined lines. Free to be alone, in pairs or in groups, to join, to align, to reproduce themselves in the daily routine. Also available with emergency light in case of power failure (Battery life: 3 hours) and in the “Manta Sign” version with laser cut customized texts on demand.