160 manufacturers · 18,987 products

The CLDFR is an IP65, Wet location, IC-rated luminaire featuring a combination of 630nm red and white LEDs for vivarium applications. Gasketed housing and door frame create a sealed enclosure. The CLDF is available in 1x2, 1x4, 2x2, and 2x4 sizes. Available options such as anti-microbial paint, 90 CRI, MILSTD 461G compliant, and 12W emergency driver. Suitable for biosafety labs rated BSL 1 and 2 (inset doorframe) and biosafety labs rated BSL 3 and 4 (overlap doorframe). Suitable for Class 1/ISO 3 Cleanrooms. For use in insulated ceilings. NSF/ANSI 2 Food Zone, Splash Zone and Non-Food Zone Applications.

The WaveLinx LITE Emergency Switchpack (ESP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The switchpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates into the LITE system by forming a mesh network while communicating with other LITE devices using Bluetooth protocol. Forming a Wireless Emergency allows for other devices to communicate to the ESP, providing power loss detection.

The WaveLinx PRO Emergency Switchpack (ESP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The ESP consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates and communicates with other PRO devices and the WaveLinx Area Controller using the PRO protocol, a 2.4GHz wireless mesh network based on the IEEE 802.15.4 standard. Forming a Wireless Emergency set allows other devices to communicate with the ESP, providing power loss detection.

The CAT Emergency Dimming Switchpack (ESP-C-010-Z1) is a lighting control device designed to control loads powered via an emergency circuit. Each unit consists of 120-277VAC 20A latching relay used to turn on/off LED and non-LED loads and a continuous 0-10V dimming control used to dim/raise fixtures' light level. The CAT Emergency Dimming Switchpack is used in conjunction with the standard CAT Dimming Switchpack to control the lights within a space. The CAT Emergency Dimming Switchpack is equipped with two RJ 45 connectors to connect the unit to other CAT devices over standard CAT5 cables using WaveLinx CAT protocol. The unit has an elongated chase nipple that allows it to be attached either directly through a 1/2"" knockout into a junction box or inside an adjacent box for meeting specific local code requirements in ceiling plenums.

The WaveLinx Wired Universal Source Controller, Feed Through (SC-UN-FT) lighting control panel provides feed-through wiring flexibility for both new and existing applications. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, and real-time individual dimmer power metering. Constant live feed per dimmer, for battery powered emergency lighting.

• The Wet location Fire Led Emergency Light provides lighting in harsh climates • Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Suitable for wall mount applications • Universal J-box mounting pattern • 120V/277VAC dual voltage operation • 2*12pcs ultra bright 2835 0.5W LED lamp heads for emergency mode, provide more than 400LM output • Built-in 3.6V 2000mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • Dual head emergency lighting, equipped with easy connect back plate and 180 degree rotating heads, makes it a snap to put this dual voltage unit anywhere

• Aluminum housing with high grade acrylic panel • Plastic mounting plate allows top, back or end mount • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 4.8 V 500mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed

Limited Warranty: 10 yearsWattage: 45W/62WColor Temperature: Standard 4000K & 5000KEfficacy: Up to 120 LPWLumen output:  5580lm – 7688lm • 120-277V / 347-480V • 1-10V Dimmable  • Optional accessories: Internal photocell and emergency battery • Standard DLC 5.1

• LED life-cycle of more than 10 years • Quick Installation • Dual-voltage 120 or 277V AC input • Includes long-life Nickel Cadmium battery for UL recognized 90 minute emergency lighting • Fully adjustable lamp-heads • Wall or Ceiling Mount

• Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Innovative, easy installation in minutes • Suitable for wall mount applications • Universal J-box mounting pattern • 120-277V Universal Voltage Operation • 2pcs 1W ultra bright LED lamp heads for emergency mode • Up to 200 lumen output • Built in 3.6V 1000 mAh Ni-MH battery for minimum 90 minutes emergency operation

• Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Wet location use • Innovative, easy installation in minutes • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 3.6 V 500mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed

Laguna 1 Suspended delivers refined architectural lighting with advanced optical performance, featuring a minimalist 1.5" aperture and low-profile form. The Point Source Louver (PSL) optics provide a deeper louver and “extra quiet” visual experience. Engineered to meet or exceed WELL Building standards for glare control, it combines aesthetics with comfort. The fixture offers a readily accessible integral driver and a unique slider optic removal system for effortless installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White come standard. Proudly crafted in Huntington Beach, CA and BABA compliant in most configurations.

The LGA-1R-LP Recessed LoPro delivers refined visual comfort and superior performance with Point Source Louver (PSL) optics. PSL offers an 80° deeper louver for an “extra quiet” visual experience—both designed to meet or exceed WELL Building glare standards. This low-profile fixture features a minimalist 1.5" aperture and supports a variety of ceiling integration options, including Trim Flange, Spackle Flange, multiple Grid Lay-in and Tegular systems, Bolt Slot, and Armstrong Interlude/USG Identitee. An innovative slider optic removal system ensures easy installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. Specified Lumen Outputs (SLO) available. Proudly crafted in Huntington Beach, CA and BABA approved in most configurations.

• Innovative Microstructure EdgeTech OpticsTM delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control, Diffused (Lambertion) optics. • MEO allows for minimalistic 3” Aperture fixtures with extremely low profiles. • PRO optics available with Asymmetric, Wide and Narrow distributions. • Individually controlled Direct and Indirect MEO optics and lumen outputs. • Wall Mount or Rotational Arm Mount • Innovative Patent Pending Tool-less “Push to Eject” system alows for easy installation and serviceability. • Individual fixture lengths and seamless continuous rows with no lens breaks, pixilation or hotspots up to 400 feet. • Integral Driver, Remote Driver, In-Canopy Driver and In-Canopy Emergency Driver options. • Specified Lumen Outputs (SLO) available • Proudly crafted in Huntington Beach, CA - USA

The HTGDU-1P features cutting-edge Microstructure EdgeTech Optics™ for unmatched optical control and seamless, uniform illumination. Offering a minimalist 1.5" aperture and ultra-low profile, it supports a range of customizable optics - including Batwing, Glare Control, Diffused, Room Fill, Ceiling Wash, and Wall Wash. Individually controlled direct and indirect MEO™ optics deliver tailored lumen output. Available with custom powder coat finishes, tool-free installation, and flexible mounting options including 361° rotational aircraft cable. Choose from integral, remote, or emergency drivers, with SLO outputs up to 1480 lm/ft. Available as 90+ CRI standard, with Tunable White available. Made in Huntington Beach, CA and BABA compliant in most configurations.

Innovative Microstructure EdgeTech OpticsTM creates precise optic control, seamless illumination and uniformity with no pixilation or hot spots. Specify Batwing, Glare Control or Diffused Optics. MEO allows for minimalistic 1.5” Aperture fixtures with extremely low profiles Individually controlled Direct and Indirect MEO Optics and Lumen Outputs. Individual fixture lengths and seamless continuous runs with no lens breaks, pixilation or hotspots up to 400 feet. Integral Driver, Remote Driver, In-Canopy Driver and In-Canopy Emergency Driver options. No visible fasteners Custom powder coat and anodized finishes Specified Lumen Outputs (SLO) available

• Elegantly designed with visual-comfortable illumination performance • Impact proof IK10 rated PC lens with symmetrical distribution • Optional -20ºC emergency battery backup driver

RS-232 Controlled Relay Panel Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Time proven, reliable, G-E RR7P3 latching relays snap in and have low voltage plug-in connectors Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 10 circuits — 120, 240 or 277volt models available Daisy-chains for unlimited circuitcount Easy set-up, no on-site commissioning or factory start-up required Simple jumper system sets RS-232 addressing Individual or zone control of circuits IP / serial integration with Building Management Systems Automatic load shedding feature standard Brownout / Power outage shut-down standard Built-in emergency override function

Retrofit DMX Lighting Control Relay Panel Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Reliable Panasonic latching in modules of 4 relays for easy expansion Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 12 circuits — 120, 240 or 277volt models available Daisy-chains for unlimited circuit count control DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long!

One-Touch Sequential System Control Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Reliable Panasonic latching in modules of 4 relays for easy expansion Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 12 circuits — 120, 240 or 277 volt models available Daisy-chains for unlimited circuitcount Sequential turn on of electrical circuits, reverse sequence off, standard Selectable delay step-rate setting standard Simple set-up, no on-site commissioning required Automatic load shedding for emergency shut-down standard Brownout (under-voltage) shut-down for processor protection standard Contact closure inputs for one-touch system control standard Contact closure outputs optional on all panels

Remote Setup, Control, and Monitoring in One Panel The most advanced self-contained controllable breaker panel on the market today. The RPC combines all the features you’ve come to expect from LynTec panels with new web enabled control and monitoring capabilities. Based on the G3 PowerlinkTM hardware platform by Square D, the RPC uses the latest remotely operated breakers and can control up to 168 circuit breakers with a single controller. In addition, the RPC’s expanded interface options (DMX, sACN, HTTP, Telnet, RS-232 or BacNET (optional)) allow users to monitor and control the system from any remote location. New programmable software platform (patent pending) can be customized for optimal power management. So simple to set up, no on-site factory commissioning is required. Control circuits individually, or establish up to 12 breaker group zones. Built in scheduling program with astronomical clock for timed zone control. Built in IP browser interface for smart phone, tablet or laptop control and monitoring. Built in contact closure inputs for wall switch or sensor operation. Circuit level load-shedding feature standard. Circuit level sequencing with selectable step-rates standard. Circuit selectable auto-on egress lighting feature standard (ETL listed UL 924) Circuit selectable brown-out (under-voltage) protection standard. High current contactor control via I/O/R card optional. SurgeX in-panel surge elimination modules available as an option. Current monitoring and reporting available as an option. Plug-on control bus strips simplify wiring and installation. 120/208V, 240V or 277/480V operation. 200% Neutrals standard 225A Main Standard (150A to 400A or MLO versions optional) Easy setup for sequential system control of audio systems or individual circuit control of non-dimmed lighting circuits. The LynTec isolated technical ground bar reduces electrical noise and improves sound system performance.

The Lumark AP BOL Bollard delivers flexible, energy-efficient pedestrian lighting with a single base fixture and four head options, allowing for multiple aesthetics without added complexity. With selectable wattage, CCT, beam angle, and photocontrol settings, it adapts easily to varied outdoor environments. DIP switches simplify field configuration, while included mounting hardware streamlines installation. Designed with future battery pack capability and IP65 durability, the BOL Bollard supports long-term performance in commercial, campus, and walkway applications. It’s the ideal blend of design, flexibility, and contractor-friendly installation in one easy-to-stock solution.