160 manufacturers · 18,987 products

Listed for emergency lighting control applications, the RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that emergency fixtures illuminate at full brightness during utility power interruptions. Its small size makes it ideal for junction box or integrated fixture mounting in wireless or other modern control systems. An integral test switch allows for quick testing and verification.

The Remote Relay Unit (RRU) provides 120 or 277 VAC input voltage configurations. The RRU is designed to force all outputs in the lighting control panel to an emergency scene regardless of the control panel programmed output status. This allows the override of outputs to full bright during loss of normal (grid) power to allow an alternate power source to drive the lighting loads. Once the RRU senses the normal power returning, the control panel will return to the normal programmed operating mode.

Cooper Lighting Solution's RRU-X-UNV includes a 20A rated high voltage Form C (N/O+N/C) relay and a low voltage Form A (N/O) relay and is UL924 Listed for emergency lighting control applications.The RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that an emergency fixture illuminates at full brightness during a utility power interruption. Its small size makes it ideal for junction box mounting or integrated fixture mounting in wireless or other modern lighting control systems. An integral test switch and LED allow for quick testing and verification of proper function.

The Remote Test Switch and Monitor option allows the user to fully monitor the status of the sine wave inverter from a remote location. The user can now locate the inverter away from public areas in schools or other public access buildings where there may be a concern with unauthorized entry to the system.

Tufflite SCHL is a Chicago Approved Steel LED Emergency Unit featuring LVD (low voltage disconnect) and internal solid-state transfer switch.

Evenlite’s emergency lighting control device ELCD 1008 is a UL-listed, Branch Circuit Emergency Lighting Transfer Switch (BCELTS) which transfers AC power between two non-synchronous power sources (emergency and normal) to the emergency lighting loads

The LightLEEDer Emergency UL 924 bypass relay control panel will force relay's ON during a normal power outage. This panel has all the same features and functions as a standard LightLEEDer lighting controller, allowing normal control of relays with emergency bypass during a normal power failure event. Relays can be all EM or a combination of normal and EM. Each output has a jumper for selecting Force On, Force Off or No change, this allows for emergency on, load shedding off, or no control selection for each relay. Provided With Phase monitoring module and high voltage dividers. This LightLEEDer Emergency lighting panel is easy to install, no external devices or complicated wiring configurations needed, reducing material and installation costs.

The ILC Remote 20 Amp, Emergency Bypass Relay combines normal relay operation with a UL 924 bypass relay in one convenient package. Relays are available in both a wired (R20D-EM) and wireless (WR20D-EM) version that uses the 915MHz radio frequency for communication to ILC wireless devices. When normal power is lost the EM relay will automatically force ON the EM load and send dimming to 100%. When normal power is restored the device will return to normal control. The R20D-EM and WR20D-EM have a relay test button, and a wired input that can be used for a remote test switch or as an override connection from a fire alarm system.

The WaveLinx Networked Relay Panel from Cooper Lighting Solutions consist of Relays and 0-10V dimming modules that is connected to the WaveLinx Area Controller through an Ethernet switch. The WaveLinx Networked Relay Panels are available in various enclosure sizes including emergency options, with capacity up to 64 latching relays and 64 dimming 0-10V channels.

• Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Wet location use • Innovative, easy installation in minutes • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 3.6 V 500mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed

RS-232 Controlled Relay Panel Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Time proven, reliable, G-E RR7P3 latching relays snap in and have low voltage plug-in connectors Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 10 circuits — 120, 240 or 277volt models available Daisy-chains for unlimited circuitcount Easy set-up, no on-site commissioning or factory start-up required Simple jumper system sets RS-232 addressing Individual or zone control of circuits IP / serial integration with Building Management Systems Automatic load shedding feature standard Brownout / Power outage shut-down standard Built-in emergency override function

RS-232 Controllable Circuit Breaker Panel The SCLC series of RS-232 controlled Load Center uses motorized circuit breakers to offer a labor-saving, one-panel alternative to relay panels. The economical Load Center panels require the least wall space for tight locations and are available in 26 and 41 circuit sizes of 3 phase, 4 wire 208Y/120Vac. Load Center’s are traditional residential panels and are consequently best suited for smaller circuit breaker counts or for applications with limited wall space. The SCLC is more economical than the bigger panelboards, and is a great value for all of the features offered! Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Easy set-up, no on-site commissioning or factory start-up required Simple jumper system sets RS-232 addressing Individual or zone control of circuits IP / serial integration with Building Management Systems Automatic load shedding feature standard Brownout / Power outage shut-down standard Emergency override function standard on every panel.

Retrofit DMX Lighting Control Relay Panel Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Reliable Panasonic latching in modules of 4 relays for easy expansion Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 12 circuits — 120, 240 or 277volt models available Daisy-chains for unlimited circuit count control DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long!

One-Touch Sequential System Control Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Reliable Panasonic latching in modules of 4 relays for easy expansion Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 12 circuits — 120, 240 or 277 volt models available Daisy-chains for unlimited circuitcount Sequential turn on of electrical circuits, reverse sequence off, standard Selectable delay step-rate setting standard Simple set-up, no on-site commissioning required Automatic load shedding for emergency shut-down standard Brownout (under-voltage) shut-down for processor protection standard Contact closure inputs for one-touch system control standard Contact closure outputs optional on all panels

One-Touch Sequential System Control The MSP series utilizes remote controlled breakers manufactured by Square D to provide a single panel sequencing solution. The panelboard is big and roomy with lots of space to work (250% more room than a load center), which makes it the electricians’ favorite! The MSP offers a dedicated cabinet for isolated technical grounding, and comes with 200% neutrals to reduce neutral overheating caused by switch-mode power supplies. The MSP series also offers bolt-on breakers as an option to traditional plug-on models, and can control one, two or three pole breakers. Sequential turn on of electrical circuits, reverse sequence off, standard Selectable delay step-rate setting standard Simple set-up, no on-site commissioning required Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Automatic load shedding for emergency shut-down standard Brownout (under-voltage) shut-down for processor protection standard Contact closure inputs for one-touch system control standard Contact closure outputs optional on all panels SurgeX in-panel surge elimination modules – optional

Self-contained, web-enabled remote control relay panels Deal with the manufacturer for quick response on quotes, delivery and support! Panel packages are ready to install, includes hardware and software. Integrated web server and browser interface for remote set-up, operation and monitoring. With patent-pending features no one else has! So easy to set up that no on-site factory commissioning is required. Control relays individually or establish up to 12 zones for grouped operation. Simply point and click for easy zone setup and breaker operation. Built in scheduling program with astronomical clock for timed zone control. Built in contact closure inputs for sensor or wall switch control. Built in IP interface for smart phone, tablet or laptop control and monitoring. Seamless integration into any DMX, sACN, HTTP, Telnet, RS-232 or BacNET (optional) control system. Circuit level load-shedding feature standard. Circuit level sequencing with selectable step-rates standard. Circuit level selectable auto-on egress lighting feature standard (ETL listed UL 924). Optional outbound signaling relay control. Built-in emergency override function standard. Power outage and brownout protection (optional) assures that your circuits never power up or down incorrectly. 120/208 or 277/480 control Locking hinged cover (lock optional) Available in 6 different configurations housing 8-64 relays (8 and 32 relay models shown)

Remote Setup, Control, and Monitoring in One Panel The most advanced self-contained controllable breaker panel on the market today. The RPC combines all the features you’ve come to expect from LynTec panels with new web enabled control and monitoring capabilities. Based on the G3 PowerlinkTM hardware platform by Square D, the RPC uses the latest remotely operated breakers and can control up to 168 circuit breakers with a single controller. In addition, the RPC’s expanded interface options (DMX, sACN, HTTP, Telnet, RS-232 or BacNET (optional)) allow users to monitor and control the system from any remote location. New programmable software platform (patent pending) can be customized for optimal power management. So simple to set up, no on-site factory commissioning is required. Control circuits individually, or establish up to 12 breaker group zones. Built in scheduling program with astronomical clock for timed zone control. Built in IP browser interface for smart phone, tablet or laptop control and monitoring. Built in contact closure inputs for wall switch or sensor operation. Circuit level load-shedding feature standard. Circuit level sequencing with selectable step-rates standard. Circuit selectable auto-on egress lighting feature standard (ETL listed UL 924) Circuit selectable brown-out (under-voltage) protection standard. High current contactor control via I/O/R card optional. SurgeX in-panel surge elimination modules available as an option. Current monitoring and reporting available as an option. Plug-on control bus strips simplify wiring and installation. 120/208V, 240V or 277/480V operation. 200% Neutrals standard 225A Main Standard (150A to 400A or MLO versions optional) Easy setup for sequential system control of audio systems or individual circuit control of non-dimmed lighting circuits. The LynTec isolated technical ground bar reduces electrical noise and improves sound system performance.