160 manufacturers · 18,987 products

 1, 2 and 3-Circuit Models  120 and 277 Volts  Zero-cross Controlled, 16A EB-Rated Relays  0-10V Dimming  16 Preset Levels for each load  Occupancy, Daylight, CCI Inputs  Demand Response  UL924 Emergency Load Option  ETL US and C Listed  Meets requirements for CA Title 24  Plenum Rated, 4 X 4 Mounting

Available in both a network and stand-alone architecture, Room Controller offers code-compliant lighting, emergency, and plug load control out-of-the-box when connected to Room Controller low voltage devices. The system includes three relays and up to three 0-10 VDC dimming outputs to control compatible dimmable ballasts. Network up to 254 ControlKeeper and Room Controller Network panels.

Listed for emergency lighting control applications, the RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that emergency fixtures illuminate at full brightness during utility power interruptions. Its small size makes it ideal for junction box or integrated fixture mounting in wireless or other modern control systems. An integral test switch allows for quick testing and verification.

The Remote Relay Unit (RRU) provides 120 or 277 VAC input voltage configurations. The RRU is designed to force all outputs in the lighting control panel to an emergency scene regardless of the control panel programmed output status. This allows the override of outputs to full bright during loss of normal (grid) power to allow an alternate power source to drive the lighting loads. Once the RRU senses the normal power returning, the control panel will return to the normal programmed operating mode.

The WaveLinx LITE Emergency Switchpack (ESP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The switchpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates into the LITE system by forming a mesh network while communicating with other LITE devices using Bluetooth protocol. Forming a Wireless Emergency allows for other devices to communicate to the ESP, providing power loss detection.

The WaveLinx PRO Emergency Switchpack (ESP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The ESP consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates and communicates with other PRO devices and the WaveLinx Area Controller using the PRO protocol, a 2.4GHz wireless mesh network based on the IEEE 802.15.4 standard. Forming a Wireless Emergency set allows other devices to communicate with the ESP, providing power loss detection.

The CAT Emergency Dimming Switchpack (ESP-C-010-Z1) is a lighting control device designed to control loads powered via an emergency circuit. Each unit consists of 120-277VAC 20A latching relay used to turn on/off LED and non-LED loads and a continuous 0-10V dimming control used to dim/raise fixtures' light level. The CAT Emergency Dimming Switchpack is used in conjunction with the standard CAT Dimming Switchpack to control the lights within a space. The CAT Emergency Dimming Switchpack is equipped with two RJ 45 connectors to connect the unit to other CAT devices over standard CAT5 cables using WaveLinx CAT protocol. The unit has an elongated chase nipple that allows it to be attached either directly through a 1/2"" knockout into a junction box or inside an adjacent box for meeting specific local code requirements in ceiling plenums.

The WaveLinx Wired Universal Source Controller, Feed Through (SC-UN-FT) lighting control panel provides feed-through wiring flexibility for both new and existing applications. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, and real-time individual dimmer power metering. Constant live feed per dimmer, for battery powered emergency lighting.

Retrofit DMX Lighting Control for Square D Panels The RBLC Controller provides a solution for contractors needing DMX control using any Square D cabinet that accepts QO circuit breakers. Designed for indoor or outdoor applications, the RBLC can be ordered with either one or two control boards capable of sequencing 10 or 20 Square D remote controlled breakers. Simply mount the RBLC next to an existing Square D panel, order as many remote controlled breakers as you’d like to sequence, plug-in your new breakers, wire to the control boards and you’re ready for remote one button on/off sequencing of your sound system. Easy! Consists of a lockable, rain tight, Hoffman UL & CSA listed cabinet with the proven LynTec LC-10 lighting control boards and power transformer mounted on an iridited aluminum subchassis.The subchassis allows the interior to be easily removed for rough-in. Just loosen 4 nuts and lift the subchassis to clear the keyhole slots. The smooth walled cabinet provides full flexibility of field mounting and piping options. DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long!

Retrofit DMX Lighting Control Relay Panel Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Reliable Panasonic latching in modules of 4 relays for easy expansion Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 12 circuits — 120, 240 or 277volt models available Daisy-chains for unlimited circuit count control DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long!

DMX Lighting Control Panel with Remote Control Breakers Looking for an efficient lighting control load center? The LCLC series of DMX controlled Load Centers uses motorized circuit breakers to offer a labor-saving one-panel alternative to DMX relay panels. Instead of a bulky setup with separate panels for different audio, visual, and lighting systems, a high quality LynTec lighting power control panel can solve your space issues. The economical Load Center panels require the least wall space for tight locations and are perfect if you are trying to save on valuable room. These compact and sleek panels are available in 26 and 41 circuit sizes od 3 phase, 4 wire 208Y/120Vac. Many small theaters, intimate restaurants, conference rooms, and other locations have found these incredibly useful. A Lighting Control Load Center is a traditional residential panel and consequently best suited for smaller circuit breaker counts or for applications with limited wall space. For a bigger arena, auditorium, or other venue, one of LynTec’s many other state of the art products would be more appropriate. The LCLC is more economical than the bigger panelboards, and is a great value for all of the features offered! Here are just a few of the high end features of this lighting power control: DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Many of these features make sure that your Lighting Control Load Center is convenient and easy to use, from the limited space it take up to the ability to have zone control. Save time, money, and space with the LCLC.

Retrofit One-Touch Sequential System Control The MRTS sequencer provides a solution for contractors needing sound system sequencing using any Square D cabinet that accepts QO circuit breakers. Designed for indoor or outdoor applications, the MRTS can be ordered with either one or two control boards capable of sequencing 12 or 24 Square D remote controlled breakers. Simply mount the MRTS next to an existing Square D panel, order as many remote controlled breakers as you’d like to sequence, plug-in your new breakers, wire to the control boards and you’re ready for remote one button on/off sequencing of your sound system. Easy! Consists of a lockable, rain tight, Hoffman UL & CSA listed cabinet with the proven LynTec MS-12 Modular sequencer boards and power transformer mounted on an iridited aluminum subchassis.The subchassis allows the interior to be easily removed for rough-in. Just loosen 4 nuts and lift the subchassis to clear the keyhole slots. The smooth walled cabinet provides full flexibility of field mounting and piping options. Sequential turn on of electrical circuits, reverse sequence off, standard Selectable delay step-rate setting standard Simple set-up, no on-site commissioning required Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Automatic load shedding for emergency shut-down standard Brownout (under-voltage) shut-down for processor protection standard Contact closure inputs for one-touch system control standard Contact closure outputs optional on all panels

One-Touch Sequential System Control The MSLC series utilizes the same Square D remote control breaker (plug-on only) used in our MSP line and can also handle one, two or three pole breakers. Load Center’s are traditional residential panels and are consequently best suited for smaller circuit breaker counts or for applications with limited wall space. The MSLC is more economical than the bigger panelboards, and is a great value for all of the features we’ve built in! Sequential turn on of electrical circuits, reverse sequence off, standard Selectable delay step-rate setting standard Simple set-up, no on-site commissioning required Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Automatic load shedding for emergency shut-down standard Brownout (under-voltage) shut-down for processor protection standard Contact closure inputs for one-touch system control standard Contact closure outputs optional on all panels

Purpose-built for lighting & video wall installations LynTec’s new LCP panel series is made for lighting and video wall applications. Based on the Square D G3 Powerlink breaker, the LCP brings you the lighting features you need with the performance that you trust. This makes the new LCP series panel one of the most cost-effective and easy-to-use power control options on the market today. DMX, sACN and IP-based Control at Your Fingertips Built-in web server with browser interface. Set up, control and monitor via smart phone, tablet or computer. Interface with any control system that communicates individual circuit addresses in IP, DMX-512, sACN or contact closures for light sensors, motion sensors or switch sets. Your Systems Your Way Enable up to 12 zones with each zone controlled by a unique protocol Create up to four sets of unique DMX-512 or sACN addresses for control Individually control circuits using unique addresses individually assigned or control entire zones using a single DMX or sACN address to free up addresses for other uses. UL-924 Capable for Emergency Ingress/Egress lighting Built-in scheduling program with an astronomical clock that has up to 84 available schedules including Sunrise, Sunset and multiple schedules controlling individual zones for complete customization Fully Customizable 30-84 space, 100-600A MLO and MCB panels as well as narrow profile panels Motorized breakers in 15, 20 and 30 amps, 1, 2 and 3 poles Optional Integrated SPD and SurgeX in-panel surge elimination modules Based on Square D’s latest generation of motorized breaker technology, each breaker is rated for 200,000 on/off/on cycles and has a mean time to failure of 900,000 on/off/on cycles Substantial installation labor savings over any other system available