160 manufacturers · 18,987 products

Voila 2" downlights and wall washers are available in round and square apertures with Open Frame, IC and CCEA housings, all requiring less than 4" of plenum depth. Downlights adjust 30º vertically with screw thread mechanism and rotate 360º horizontally. Using HyFlex optics, field-interchangeable beam angles range from 10º to 90º. Integral drivers are available for 0-10V, ELV or Triac dimming and can be replaced through the 2" aperture. Remote drivers are available for other protocols, emergency operation, and ChromaWerx Sola and Duo. Die-cast baffles are offered in 0.5" and 1.0" depth with trim or trimless options and multiple finishes. Pre-set luminaire light output is available from up to 1340 lumens. Voila 2" downlights has an IP44 rating.

The HALO LCR Series comes in sizes 2", 4", 6" and 8" wall wash and downlights. This high-powered LED module installs without the use of a recessed housing, reducing time and expense on remodel or new construction. The downlight has a wide distribution pattern ideal for general area illumination and the wall wash illuminates a vertical surface with uniform brightness. The LCR series comes with dual dimming as standard and is designed for residential, mixed-use, and commercial spaces. The LCR has ultimate flexibility with selectable color temperature and lumens. During installation select the perfect color temperature for your space with 6 color temperatures between warm (2700K) to daylight (6500K). Depending on your ceiling height or desired light level choose from several lumen options. The LCR Series features an emergency battery option and designer trims in smooth or baffle.

MXG2PRDREM

MXG2PSDREM

Model#: UVK-3000XX The Vekter with Adjustable Extended Arm is a wedge-shaped, low-profile, wall-mounted luminaire designed specifically for downlight applications where extended reach and precise aiming are required. This variant features an elongated adjustable arm, offering greater flexibility in positioning the light source for optimal coverage. It comes equipped with high-powered LEDs and a selection of optics to meet a variety of lighting needs. The Vekter is available with Type II, III, IV, and V light distribution options, allowing for wider spacing and consistent illumination between fixtures. With a Type II optic, spacings of up to 40 feet on center can be achieved while maintaining uniformity that complies with path of egress requirements—delivering energy savings and reduced installation costs. Custom beam configurations are also possible, such as combining Type II and Type IV optics within the same fixture to achieve tailored light distribution. The integral electronic control gear is housed in a waterproof enclosure, and a mounting plate compatible with 3" and 4" octagonal junction boxes is included. Ideal for lighting footpaths, building facades, entrances, and surrounding parking areas, the Vekter with Extended Adjustable Arm offers enhanced reach, precision, and performance in a sleek, durable design.

Model#: UJE-30XXX  Wall luminaires with a selection of light distributions and LED wattages with downward light distributions. The Jet ofers a variety of beam spread options that facilitates wider spacing and even light distribution between the light fixtures. The up/down light versions can be manufactured using different beam spreads for the up and down optics, as well as different wattages upon request. Integral electronic control gear. Mounting plate for 3" and 4" junction box is provided with the fixture. Matching surface mount conduit boxes are available as an option. Custom round pole adapters can be manufactured to suit specific pole diameters for column mounting applications. Please contact the factory for more information For Type II, III & IV distributions, see Tango 29 to 32 surface wall luminaires. This fixture can be provided with an integrated emergency LED driver, please specify as an option

Model#: UVK-300XX  The Vekter with Adjustable Arm is a wedge-shaped, low-profile, wall-mounted luminaire designed specifically for downlight applications. This variant features an adjustable arm that allows for precise aiming, offering greater flexibility in directing light exactly where it’s needed. Equipped with high-powered LEDs and a range of optical options, the Vekter supports Type II, III, IV, and V light distributions. These options enable wider fixture spacing and consistent illumination. With a Type II optic, spacings of up to 40 feet on center can be achieved while maintaining uniformity that meets path of egress requirements—resulting in improved energy efficiency and lower installation costs. The luminaire can also be configured with mixed beam optics, such as combining Type II and Type IV within the same fixture, to achieve customized light distribution. Integral electronic control gear is housed in a waterproof enclosure, and a mounting plate compatible with 3" and 4" octagonal junction boxes is included. Ideal for lighting footpaths, building facades, entrances, and surrounding parking areas, the Vekter with Adjustable Arm delivers targeted performance, versatility, and architectural appeal.

Model#: UVK-30XXX The Vekter is a wedge-shaped, low-profile, wall-mounted luminaire designed specifically for downlight applications. It features high-powered LEDs and a selection of optics to meet a variety of lighting requirements. Available with Type II, III, IV, and V light distribution options, the Vekter enables wider fixture spacing and consistent illumination. With a Type II optic, spacings of up to 40 feet on center can be achieved while maintaining uniformity that complies with path of egress requirements—resulting in energy savings and reduced installation costs. The luminaire can also be configured with mixed beam optics, such as combining Type II and Type IV within the same fixture, to achieve custom light distribution. Integral electronic control gear is housed in a waterproof enclosure, and a mounting plate compatible with 3" and 4" octagonal junction boxes is included. Ideal for lighting footpaths, building facades, entrances, and surrounding parking areas, the Vekter delivers reliable performance, efficiency, and clean architectural styling.

Model#: UJE-3XXXX Wall luminaires with a selection of light distributions and LED wattages with up and downward light distributions. The Jet ofers a variety of beam spread options that facilitates wider spacing and even light distribution between the light fixtures. The up/down light versions can be manufactured using different beam spreads for the up and down optics, as well as different wattages upon request. Integral electronic control gear. Mounting plate for 3" and 4" junction box is provided with the fixture. Matching surface mount conduit boxes are available as an option. Custom round pole adapters can be manufactured to suit specific pole diameters for column mounting applications. Please contact the factory for more information For Type II, III & IV distributions, see Tango 29 to 32 surface wall luminaires. This fixture can be provided with an integrated emergency LED driver, please specify as an option