160 manufacturers · 18,987 products

The Regrazer is a small cove grazer that grazes walls up to 40’ height with beam spread of 10° x 10°. Made from anodized aluminum it provides great heat dissipation.

Flo-Mini is made of silicone material which provided great flexibility allowing versatile designs from simple to stylish. It has a unique optical light distribution structure design that gives uniform lighting surface with no shadow. It is UV, saltwater, and solvent resistant.

Phantom OC is a recessed walk over fixture that consists of the outer solid PVC and the sturdy inner, one piece PMMA extrusion. This fixture can withstand a maximum weight of 30kN and is considered IP67. To be used with the flanges in the ground or above ground, both is possible. It creates uniform light lines and can be used as single fixture or combining several fixtures without shadows to create continuous seamless light lines and makes for an excellent outdoor and indoor ingrade uplight.

Liquid Light 676 bends in the vertical axis with a minimum radius of 4.7” and has a cross section of 0.59” x 0.41 “. The Liquid Light 676 guarantees UV stability and is solvent and saltwater resistant. Along with IP68 rating and LM 80 compliance, this product is fully submersible 6.5 ft deep and safe to be used in fountains, yachts, bridges, pools, spa, and marine applications. Resistance to chlorine. Provides perfectly uniform light without showing any pixilation. It is UL676 compliant for inhabitable pools and spas. 3 Step McAdam binning and perfect uniformity due to “one bin only” throughout the entire product results in excellent performance for both indoor and outdoor applications.

FlexBeam features a variety of miniature precise optics on a high-end flexible board, combining flexibility and beam precision in one product. Being IP67, this product can be used indoors as well as outdoors.

AD02 is made from high quality aluminum and offers a round lens which provides a softer look and a wider distribution angle (220 °°), therefore also providing lateral light. Made from anodized aluminum it has great heat dissipation capabilities.

The LH01 is unique due to theregressed lens, which helps reduce glare and surface brightness. The mud-over flanges allow for easy installation. Made from anodized aluminum it has great heat dissipation capabilities.

The LF01 is a flangeless mud-over extrusion with regressed lens, helping to not only reduce glare and surface brightness but also creating beautiful and unobtrusive light lines, integrating seamlessly into many architectural applications.

The LE05 is a micro grazer with a regressed light source and therefore very low glare, great for the perimeter. Made from anodized aluminum it provides good heat dissipation.

The LD01 is aflangeless mud-overextrusion created from anodized aluminum that transforms perimeters into a beautiful glow which visually disconnects wall from ceiling. This extrusion’s innovative design allows for an invisible light source , making it a unique and outstanding architectural detail of immense esthetical beauty.

JM02 is an extrusion that was made specifically for Beulux’ line voltage tape, Madrid. It will show no pixilation with both the 270lm/ft and 500 lm/ft Madrid. Made from high quality aluminum alloy, it consists of an inner extrusion and an outer extrusion. The inner one holds the Madrid tape very well in place and is then clicked into the outer extrusion to guarantee easy installation.

Specification grade, flexible LED sheet with minimal cutting increments

Specification grade, flexible LED sheet with minimal cutting increments

Double FlexBeam is a fantastic new solution for challenging architectural applications. It combines precise optics, power and high flexibility with capability to bend both horizontally and vertically. Various beam spreads increase the flexibility and help finding the perfect solution for various lighting challenges.

BE01 is a very common recessed extrusion as it is still quite small but can hold all lumen output tapes of the Beulux range. Made from anodized aluminum it has great heat dissipation capabilities.

AC02 is made from high quality aluminum and offers a round lens which provides a softer look and a wider distribution angle (180°), therefore also providing lateral light. Made from anodized aluminum it has great heat dissipation capabilities.

AB02 is the perfect extrusion for shelves, under cabinet, and more occasions where small and unobtrusive lighting solutions are required. The sleek design integrates discretely and still offers powerful illumination. The intelligent engineering allows for easy installation without any visible screws. Made from anodized aluminum it has great heat dissipation capabilities.

The JG04 is a 90° extrusion created from high quality anodized aluminum MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 3⁄16 x 1 3⁄16CustomizationCut to specified length JG04

XT01 is a very common recessed extrusion as it is still quite small but can hold all lumen output tapes of the Beulux range. Made from anodized aluminum it has great heat dissipation capabilities. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 29⁄32 x 49⁄64CustomizationCut to specified length XT01

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.

London Wave Side View is made from flexible PMMA and bends in the horizontal axis. Due to using PMMA and not silicone (which is the standard material for this kind of product), LWSV is walk-over rated and IP67. Can be installed in wooden decks, concrete pour applications and is often used as under-bench lighting. CRI90 IP67 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>90LEDs/ft36Output (lm/ft)102-120Consumption (watt/ft)2.9Efficacy (lm/watt)35-41Beam Angle120°Voltage24V DCMax Run Length42 ftCustomization Increment2" London Wave SV

Liquid Light Large Side View is submersible due to being fully encapsulated with high quality, UV stabilized Polyurethane. IP68 rated, solvent as well as saltwater resistant, it can be used in pools, fountains and for marine applications. Bends in the horizontal axis. IP68 Color (CCT)RGBWBeam Angle120°Voltage24V DCCustomization Increment2.8" Liquid Light LTV

Liquid Light Large Side View is submersible due to being fully encapsulated with high quality, UV stabilized Polyurethane. IP68 rated, solvent as well as saltwater resistant, it can be used in pools, fountains and for marine applications. Bends in the horizontal axis. CRI80 IP68 Color (CCT)2700K 3000K 3200K 3500K 4000K 5000K 6500KCRI>80LEDs/ft44Output (lm/ft)276-290Consumption (watt/ft)4.6Efficacy (lm/watt)60-63Beam Angle120°Voltage24V DCMax Run Length32 ftCustomization Increment1.6" Liquid Light LSV

Liquid Light Large Side View is submersible due to being fully encapsulated with high quality, UV stabilized Polyurethane. IP68 rated, solvent as well as saltwater resistant, it can be used in pools, fountains and for marine applications. Bends in the horizontal axis. IP68 ColorTunable WhiteLEDs/ft73Beam Angle120°Voltage24V DCCustomization Increment2" Liquid Light LSV

Liquid Light Large Side View is submersible due to being fully encapsulated with high quality, UV stabilized Polyurethane. IP68 rated, solvent as well as saltwater resistant, it can be used in pools, fountains and for marine applications. Bends in the horizontal axis. IP68 ColorStatic AmberLEDs/ft44Beam Angle120°Voltage24V DCCustomization Increment1.6” Liquid Light LSV

IP67 Color (CCT)RGBW (W=3000K)LEDs/ft29Consumption (watt/ft)7.3Efficacy (lm/watt)23Beam Angle120°Voltage24V DCMax Run Length16 ftCustomization Increment2” Phantom OS

The CT06 is a unique extrusion that is made from high quality anodized aluminum, it is compact giving this extrusion dual functionality as both a closet rod and lighting fixture. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 19⁄32 x 11⁄32CustomizationCut to specified length CT06

The UT01 is an inground extrusion that is made of high-quality anodized aluminum, this extrusion is very strong and durable, making it perfect for indoor residential or commercial applications. This extrusion pairs with the UT01-SL, which is a sturdy polycarbonate lens that makes it walk-over enabled and emits a smooth line of light for a polished look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 55⁄64 x 1CustomizationCut to specified length UT01

The LB03OUT is a unique extrusion with innovative design that allows to transform an outer dry wall corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length LB03OUT

The PH02 is a recessed or surface mounted walk-over fixture that consists of the outer solid aluminum and the sturdy inner, one-piece PMMA extrusion. This fixture can withstand a maximum weight of 30kN and is considered IP67. This extrusion creates uniform light lines and can be used as single fixture or combining several fixtures without shadows, to create continuous seamless light lines and makes for an excellent outdoor and indoor linear light. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 13⁄16 x 1 49⁄64CustomizationCut to specified length PH02

The AA07 was created with bathrooms and kitchen areas in mind; this under tile extrusion is constructed from high quality anodized aluminum and is used to create lineation between tiles or to beautifully end a line of tiles. This creates a sublime accent for counters and vanities alike and it can be mounted horizontally or vertically for added customization. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 31⁄64 x 7⁄16CustomizationCut to specified length AA07

The LB03OUT is a unique extrusion with innovative design that allows to transform an outer dry wall corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length

The JD01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 2 39⁄64 x 39⁄64CustomizationCut to specified length JD01

The JC01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 2 x 39⁄64CustomizationCut to specified length JC01