160 manufacturers · 18,987 products

The JB01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x W 1 27⁄64 x 39⁄64CustomizationCut to specified length JB01

The JA01 is a flangeless pocket extrusion that combines a hidden light source with a smooth angle in the extrusion to exude an exquisite glow onto floors, walkways, stairs and can also be used as an uplight (to replace a cove). MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 39⁄64 x 2 13⁄64CustomizationCut to specified length JA01

The AG01 is a recessed flangeless extrusion that is constructed using anodized aluminum and it is designed to be used for wall and ceiling, with easy installation. This extrusion can have diffusors up to 19’ 6” length, creating a seamless look for longer runs.

The JF04 is a small 90° extrusion that was created from high quality anodized aluminum. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 5⁄8 x 5⁄8CustomizationCut to specified length JF04

London Wave Top View is made from silicone and bends in the vertical axis. Available in white, tunable white, RGB and RGBW. It can be used outdoors as well as indoors due to its IP65 rating. IP65 ColorStatic GreenLEDs/ft36Consumption (watt/ft)7.0Beam Angle120°Voltage24V DCMax Run Length13 ftCustomization Increment2" London Wave TV

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.

Liquid Light Large Top View bends in the vertical axis, has an IP68 rating and is therefore submersible. Made with high quality, UV stabilized PU. It is solvent resistant and can be used in pools and fountains. It is also salt water resistant. Beam spread 120 degrees. IP68 ColorStatic RedLEDs/ft44Beam Angle120°Voltage24V DCCustomization Increment1.6” Liquid Light LTV

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.

Liquid Light Small Top View has an IP68 rating and is therefore submersible. Bends in the vertical axis down to a very small radius. Made with high quality, UV stabilized PU. It is solvent resistant and can be used in pools and fountains. It is also salt water resistant. LLSTV is unique as it also provides lateral light with its 160 degrees beam spread. IP68 ColorStatic BlueLEDs/ft44Beam Angle160°Voltage24V DCCustomization Increment1.6" Liquid Light STV

Liquid Light Small Top View has an IP68 rating and is therefore submersible. Bends in the vertical axis down to a very small radius. Made with high quality, UV stabilized PU. It is solvent resistant and can be used in pools and fountains. It is also salt water resistant. LLSTV is unique as it also provides lateral light with its 160 degrees beam spread. CRI80 IP68 Color (CCT)2700K, 3000K, 3200K, 3500K, 4000K, 5000K, 6500KCRI>80LEDs/ft44Output (lm/ft)221-262Consumption (watt/ft)3.1Efficacy (lm/watt)71-85Beam Angle160°Voltage24V DCMax Run Length39 ftCustomization Increment1.6" Liquid Light STV

Liquid Light Small Top View has an IP68 rating and is therefore submersible. Bends in the vertical axis down to a very small radius. Made with high quality, UV stabilized PU. It is solvent resistant and can be used in pools and fountains. It is also salt water resistant. LLSTV is unique as it also provides lateral light with its 160 degrees beam spread. CRI80 IP68 Color (CCT)2700K, 3000K, 3200K, 3500K, 4000K, 5000K, 6500KCRI>80LEDs/ft44Output (lm/ft)98-134Consumption (watt/ft)1.5Efficacy (lm/watt)65-75Beam Angle160°Voltage24V DCMax Run Length59 ftCustomization Increment1.6" Liquid Light STV

Liquid Light Large Side View is submersible due to being fully encapsulated with high quality, UV stabilized Polyurethane. IP68 rated, solvent as well as saltwater resistant, it can be used in pools, fountains and for marine applications. Bends in the horizontal axis. IP68 ColorRGBLEDs/ft44Beam Angle120°Voltage24V DCCustomization Increment2.8" Liquid Light LSV

Liquid Light Large Side View is submersible due to being fully encapsulated with high quality, UV stabilized Polyurethane. IP68 rated, solvent as well as saltwater resistant, it can be used in pools, fountains and for marine applications. Bends in the horizontal axis. CRI80 IP68 Color (CCT)2700K 3000K 3200K 3500K 4000K 5000K 6500KCRI>80LEDs/ft44Output (lm/ft)186-195Consumption (watt/ft)3.1Efficacy (lm/watt)60-63Beam Angle120°Voltage24V DCMax Run Length42 ftCustomization Increment1.6" Liquid Light LSV

Liquid Light Large Side View is submersible due to being fully encapsulated with high quality, UV stabilized Polyurethane. IP68 rated, solvent as well as saltwater resistant, it can be used in pools, fountains and for marine applications. Bends in the horizontal axis. CRI80 IP68 Color (CCT)2700K, 3000K, 3200K, 3500K, 4000K, 5000K, 6500KCRI>80LEDs/ft44Output (lm/ft)96-101Consumption (watt/ft)1.5Efficacy (lm/watt)64-67Beam Angle120°Voltage24V DCMax Run Length68 ftCustomization Increment2” Liquid Light LSV

Liquid Light Small Side View Is made from high quality and UV stabilized Polyurethane and bends in the horizontal axis. With its IP68 rating it can be submersed and due to it being solvent as well as saltwater resistant, it can be used in pools, fountains and boats. CRI80 IP68 Color (CCT)2400k, 2700K, 3000K, 3800K, 4200K, 5500K, 6500KCRI>80LEDs/ft36Output (lm/ft)71-87Consumption (watt/ft)1.5Efficacy (lm/watt)47-58Beam Angle120°Voltage24V DCMax Run Length49 ftCustomization Increment2" Liquid Light SSV

The LB03IN’s innovative design has been created to transform an inner corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length LB03IN

London Wave Top View is made from silicone and bends in the vertical axis. Available in white, tunable white, RGB and RGBW. It can be used outdoors as well as indoors due to its IP65 rating. CRI90 IP65 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>90LEDs/ft36Output (lm/ft)138-162Consumption (watt/ft)2.9Efficacy (lm/watt)48-56Beam Angle120°Voltage24V DCMax Run Length42 ftCustomization Increment2" London Wave TV

The LA01 is a recessed pocket extrusion that is crafted from high quality anodized aluminum, measuring just below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch studs or create special stud structures. The pocket extrusion allows for a hidden light source with a smooth angle in the extrusion to exude a beautiful radiant light onto floors, walkways, stairs and can also be used as an uplight (to replace a cove). MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 31⁄64 x 2 9⁄32CustomizationCut to specified length LA01

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixilation free, uniform light lines, straight or curved. Made from UV-resistant silicone. The 270° light output provides direct as well as lateral and back light. Can be used with aluminum extrusion for straight lines or with the flexible extrusion to keep curves exactly as desired. Also mounts to the surface with mounting clips.

London Wave Side View is made from flexible PMMA and bends in the horizontal axis. Due to using PMMA and not silicone (which is the standard material for this kind of product), LWSV is walk-over rated and IP67. Can be installed in wooden decks, concrete pour applications and is often used as under-bench lighting. CRI90 IP67 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>90LEDs/ft36Output (lm/ft)58-68Consumption (watt/ft)1.6Efficacy (lm/watt)36-42Beam Angle120°Voltage24V DCMax Run Length55 ftCustomization Increment2” London Wave SV

Liquid Light Large Top View bends in the vertical axis, has an IP68 rating and is therefore submersible. Made with high quality, UV stabilized PU. It is solvent resistant and can be used in pools and fountains. It is also salt water resistant. Beam spread 120 degrees. IP68 ColorRGBLEDs/ft44Beam Angle120°Voltage24V DCCustomization Increment1.6” Liquid Light LTV

Liquid Light Large Side View is submersible due to being fully encapsulated with high quality, UV stabilized Polyurethane. IP68 rated, solvent as well as saltwater resistant, it can be used in pools, fountains and for marine applications. Bends in the horizontal axis. IP68 Color (CCT)RGBWBeam Angle120°Voltage24V DCCustomization Increment2.8" Liquid Light LSV

Liquid Light Small Side View is made from high quality and UV stabilized Polyurethane and bends in the horizontal axis. With its IP68 rating it can be submersed and due to it being solvent as well as saltwater resistant, it can be used in pools, fountains and boats. IP68 ColorStatic RGBLEDs/ft36Beam Angle120°Voltage24V DCCustomization Increment2” Liquid Light SSV

Liquid Light Small Side View is made from high quality and UV stabilized Polyurethane and bends in the horizontal axis. With its IP68 rating it can be submersed and due to it being solvent as well as saltwater resistant, it can be used in pools, fountains and boats. IP68 ColorStatic BlueLEDs/ft36Beam Angle120°Voltage24V DCCustomization Increment2” Liquid Light SSV

Liquid Light Small Side View is made from high quality and UV stabilized Polyurethane and bends in the horizontal axis. With its IP68 rating it can be submersed and due to it being solvent as well as saltwater resistant, it can be used in pools, fountains and boats. IP68 ColorStatic GreenLEDs/ft78Beam Angle120°Voltage24V DCCustomization Increment2” Liquid Light SSV

Liquid Light Small Side View is made from high quality and UV stabilized Polyurethane and bends in the horizontal axis. With its IP68 rating it can be submersed and due to it being solvent as well as saltwater resistant, it can be used in pools, fountains and boats. CRI80 IP68 ColorTunable WhiteLEDs/ft73Beam Angle120°Voltage24V DCCustomization Increment2" Liquid Light SSV

Liquid Light Large Top View bends in the vertical axis, has an IP68 rating and is therefore submersible. Made with high quality, UV stabilized PU. It is solvent resistant and can be used in pools and fountains. It is also salt water resistant. Beam spread 120 degrees. IP68 ColorStatic GreenLEDs/ft44Beam Angle120°Voltage24V DCCustomization Increment1.6” Liquid Light LTV

The PH01 is a recessed walk-over fixture that consists of the outer solid aluminum and the sturdy inner, one-piece PMMA extrusion. This fixture can withstand a maximum weight of 30kN and is considered IP67. To be used with the flanges in the ground or above ground, both is possible. PH01 creates uniform light lines and can be used as single fixture or combining several fixtures without shadows to create continuous seamless light lines and makes for an excellent outdoor and indoor ingrade uplight. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 9⁄32 x 2 21⁄64CustomizationCut to specified length PH01

The PH01 is a recessed walk-over fixture that consists of the outer solid aluminum and the sturdy inner, one-piece PMMA extrusion. This fixture can withstand a maximum weight of 30kN and is considered IP67. To be used with the flanges in the ground or above ground, both is possible. PH01 creates uniform light lines and can be used as single fixture or combining several fixtures without shadows to create continuous seamless light lines and makes for an excellent outdoor and indoor ingrade uplight. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 9⁄32 x 2 21⁄64CustomizationCut to specified length PH01

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.

XT02 is a very common surface mounted extrusion as it is still quite small but can hold all lumen output tapes of the Beulux range. Made from anodized aluminum it has great heat dissipation capabilities.

Flo is made of silicone material which provided great flexibility allowing versatile designs from simple to stylish. It has a unique optical light distribution structure design that gives uniform lighting surface with no shadow. It is UV, saltwater, and solvent resistant.

Beulux Coblence-S specification-graded series surpasses standard COB tape lights by using preselected, 1-Bin LEDs, ensuring perfect color consistency even over long runs. Constructed with SMD technology, it provides uniform light distribution without pixelation, offering superior performance and visual comfort.

Picche Category:Cylinder Collection The Picche Collection offers a range of LED CRISTALY® ceiling lights with a minimalist design and single light emission. Perfect for modern interiors, these fixtures are available in three sizes: Ø: 5.1″ (13 cm) x H: 5.1″ (13 cm), Ø: 5.1″ (13 cm) x H: 7.9″ (20 cm), and Ø: 5.1″ (13 cm) x H: 11.8″ (30 cm). Crafted from CRISTALY®, they accommodate 111 mm diameter GU10 lamps or integrated LED light sources. The satin polycarbonate diffuser ensures a soft, diffused light from the bottom. Choose between 13W or 18W power, with CCT options of 2700K, 3000K, or 4000K, and select either non-dimmable or 0-10V dimmable versions to suit your lighting needs. The Picche Collection combines sleek design with functional versatility.

Bolla Big Category:Plaster-in Collection,Ceiling-Mounted The BOLLA BIG by BYIBA is a sophisticated recessed ceiling light designed for modern interiors. Made from CRISTALY®, an innovative and eco-friendly material, this fixture combines sleek design with exceptional performance. Its elegant circular shape and conical trim create a seamless integration into any space, while the 88W LED ensures powerful illumination with color temperature options of 2700K, 3000K, or 4000K. Compatible with dimming systems for customized ambiance, the BOLLA BIG reflects Italian craftsmanship and style, offering a perfect blend of aesthetics and functionality for refined lighting solutions.

Aquila Category:Plaster-in Collection,Ceiling-Mounted The AQUILA by BYIBA is a versatile recessed lighting fixture crafted from CRISTALY®, a durable and paintable material. Designed for both ceiling and wall installations, it features a circular recess housing an adjustable light source that can be oriented up to 30° in any direction, providing adaptable illumination for various needs. The fixture is compatible with GU10 LED bulbs (up to 35W) or integrated LED modules offering color temperatures of 2700K, 3000K, or 4000K, ensuring energy-efficient and customizable lighting solutions. With a required drywall depth of approximately 5.7 inches and a cut-out size of approximately 10.4 x 10.4 inches, the AQUILA integrates seamlessly into interior spaces, embodying craftsmanship and design excellence by BYIBA.

Orione Small Category:Plaster-in Collection,Ceiling-Mounted,Wall-Mounted The ORIONE SMALL 4105 by BYIBA is a recessed lighting fixture crafted from CRISTALY®, a durable and paintable material that seamlessly integrates into modern interiors. Featuring a sleek square design with a glass diffuser, it provides soft, energy-efficient LED illumination in various color temperatures, including 2700K, 3000K, and 4000K. Available in 8W and 16W configurations, it delivers brightness levels tailored to different lighting needs. With its compact dimensions and Italian craftsmanship, the ORIONE SMALL is an elegant choice for both residential and commercial spaces, offering style and functionality in one refined design.

Spakko Category:Plaster-in Collection,Wall-Mounted The SPAKKO 2369A by BYIBA is a minimalist wall-recessed luminaire crafted from CRISTALY®, a patented, eco-friendly material known for its durability and versatility. Designed for indirect upward lighting, it features a central slot with smooth edges, seamlessly integrating into various interior settings. The fixture is compatible with GU10 35mm LEDs and also offers 13W LED module (700mA) options in 2700K (1500lm, CRI90), 3000K (1600lm, CRI90), and 4000K (1700lm, CRI90), requiring a remote driver (not included). Measuring 13.98” x 12.01” with a recess depth of 2.56”, the SPAKKO 2369A is ideal for drywall installations and can be customized with water-based paints to match any décor, with an optional housing box available for brickwork installations.

Byiba Circle Category:Track Collection,Magnetic Track Collection,MAGNETIC TRACK SYSTEM BYIBA CIRCLE magnetic track is a minimalistic track lighting solution that connects and powers it’s LED heads via a magnetic core. The design of the 24-volt system not only ensures a reliable and safe connection between each fixture to the track, it allows for ease in the relocation of each-at any time.

Znow Category:Cylinder Collection The Znow Cylinders Collection offers a sleek, modern design with six surface-mounted lighting models crafted from high-quality metal, available in various sizes. Choose from a vibrant palette of finishes, including Black, White, Gold, and more. The collection supports LED or GU10 light sources, with options for different wattages and color temperatures (2700K, 3000K, 4000K). Dimming options include Non-Dimmable and 0-10V. Suitable for indoor environments, this ETL-certified collection is perfect for adding a touch of minimalist elegance to contemporary spaces.

Arc Category:Cylinder Collection The Arc Cylindrical Ceiling Luminaire features a sleek, modern design with a built-in 110-277V power supply. Made from extruded aluminum and finished with durable epoxy-polyester powders, it ensures excellent light control with a variety of beam angles. Available in three sizes—Small (2.55″ x 7.9″), Medium (2.55″ x 15.7″), and Big (2.55″ x 31.5″)—and two finishes (Black and White). Light sources range from 6W to 9W LEDs, offering 3000K with CRI>90. Optional 2700K, 4000K, DALI dimming, and ON-OFF available. IP40 rated, ideal for ceiling mounting.

Quadri Category:Cylinder Collection The Quadri cylinders collection features modern, minimalist surface-mounted lighting fixtures crafted from CRISTALY®. Available in three sizes—small (H: 5.12″ x W: 5.12″ x Ø: 4.4″), medium (H: 7.9″ x W: 5.12″ x Ø: 4.4″), and large (H: 11.8″ x W: 5.12″ x Ø: 4.4″)—these fixtures offer a sleek, cylindrical design. The collection is available in White (paintable), Corten, and Aged Copper finishes. Powered by a 13W LED, with a voltage range of 110-277V and 700 mA current, it offers CCT options of 2700K, 3000K, or 4000K. Certified by ETL, the Scopio collection is ideal for indoor environments.

Picche Category:Cylinder Collection The Picche Collection offers a range of LED CRISTALY® ceiling lights with a minimalist design and single light emission. Perfect for modern interiors, these fixtures are available in three sizes: Ø: 5.1″ (13 cm) x H: 5.1″ (13 cm), Ø: 5.1″ (13 cm) x H: 7.9″ (20 cm), and Ø: 5.1″ (13 cm) x H: 11.8″ (30 cm).Crafted from CRISTALY®, they accommodate 111 mm diameter GU10 lamps or integrated LED light sources. The satin polycarbonate diffuser ensures a soft, diffused light from the bottom.Choose between 13W or 18W power, with CCT options of 2700K, 3000K, or 4000K, and select either non-dimmable or 0-10V dimmable versions to suit your lighting needs.The Picche Collection combines sleek design with functional versatility.

Coolfin Category:Cylinder Collection The Coolfin cylinders Collection is a sleek, modern lighting solution, featuring suspended and surface-mounted fixtures crafted from durable metal. Available in three models, these fixtures come in a wide range of finishes, including Black, White, Gold, Red, Olive, Vanilla, Chocolate, Flamingo Pink, Pistachio, Indigo, Light Blue, Beige, and Dark Brown. With options for LED or GU10 bulbs, color temperatures of 2700K, 3000K, or 4000K, and dimming capabilities, the Coolfin cylinders combine aesthetic appeal with versatile functionality. Ideal for indoor use, these ETL-certified fixtures enhance any contemporary interior.

Thanks to its design recalling the glorious days of the industrial revolution, the Karina luminaire combines efficiency and sobriety. Its technical characteristics and uncluttered lines meet the demands imposed by classic outdoor projects, industrial sites and large halls (railway stations or museums). A great classic in the world of lighting, Karina benefits from the latest technological innovations. We have incorporated the latest in LED technology to make this classic, a modernly efficient throw back to a classical time in our history.