160 manufacturers · 18,987 products

Seamless satined lens for extrusion JB01 MaterialSeamless PCColorMilky WhiteDimension (ft)Length - Up to 19.7 ftCustomizationCut to specified length

Satined lens for extrusion AA family MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4CustomizationCut to specified length

Seamless clear lens for extrusion XT family MaterialSeamless PCColorClearDimension (ft)Length - Up to 19.7 ftCustomizationCut to specified length

90° Clear lens for extrusion JF04 MaterialPMMA / PCColorClearDimension (in)Length - 78 3⁄4CustomizationCut to specified length

Clear lens for extrusion JF04 MaterialPMMA / PCColorClearDimension (in)Length - 78 3⁄4CustomizationCut to specified length

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.

RF Remote Controller – RGBW/Tunable White , 4 Zone, 5 Channel C94.92-4ZR

The LB03IN’s innovative design has been created to transform an inner corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length LB03IN

RF Receiver – Tunable White , 4 Channel C92-RF

DMX Decoder – 24 Channel (4Amp per channel), 5-pin XLR output, 8/16 bit switches CDMX24C

Linear Connector for AA01, JB01, JC01, JD01, JG04, VT01, VT02, XT01, XT02, YT07 Extrusions

Center support for aluminum closet rod with lighting accent CT06 extrusion

Content here

Adjustable angle for CT02, XT01, XT02, YT02, YT04 Extrusions

Mounting Clip for Liquid Light – Small Side View

Mounting Clip for JG04 Extrusion

End cap for YT08 Extrusion + YT99-CL / YT99-SL Lens

End cap for XT02 Extrusion + XT99-DL Lens

End cap for LB03IN Extrusion + LB03-SL Lens

End cap for JB01 Extrusion + JB01-SLS Lens

End cap for AL02 Extrusion + AL02-SL Lens

End cap for AA01 Extrusion + AA99-SL Lens

Madrid Extension Cord – 2 Ft

Liquid Light – Large Top/Side View4 Pin connectors: (1 ft) cable for each male & female connector for RGB

Drop lens for extrusion CT family MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4CustomizationCut to specified length

Satined lens for extrusion LA01, LC07 MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4CustomizationCut to specified length

Satined lens for extrusion JF04 MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4CustomizationCut to specified length

Satined lens for extrusion AL02 MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4CustomizationCut to specified length

Clear lens for extrusion YT family MaterialPMMA / PCColorClearDimension (in)Length - 78 3⁄4CustomizationCut to specified length

The LA01 is a recessed pocket extrusion that is crafted from high quality anodized aluminum, measuring just below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch studs or create special stud structures. The pocket extrusion allows for a hidden light source with a smooth angle in the extrusion to exude a beautiful radiant light onto floors, walkways, stairs and can also be used as an uplight (to replace a cove). MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 31⁄64 x 2 9⁄32CustomizationCut to specified length LA01

RF Remote Controller – RGBW , 6 Zone, 4 Channel C94-6ZR

RF Remote Controller – Tunable White , 6 Zone, 3 Channel C92-6ZR

RF Remote Controller – Dimming , 1 Zone, 2 Channel C91-1ZR

Recessed Spring for XT01 Extrusion

End cap for XT02 Extrusion + XT99-CLS / XT99-SLS / XT99-CL35 Lens

End cap for JD01 Extrusion + JD01-SLS Lens

Madrid Jumper Cable – 4 Ft

Seamless satined lens for extrusion XT family MaterialSeamless PCColorMilky WhiteDimension (ft)Length - Up to 19.7 ftCustomizationCut to specified length

Seamless satined lens for extrusion JD01 MaterialSeamless PCColorMilky WhiteDimension (ft)Length - Up to 19.7 ftCustomizationCut to specified length

Satined lens for extrusion YT family MaterialPMMAColorSatinedLight TransmissionDimension (in)Length - 78 3⁄4CustomizationCut to specified length

90° Satined lens for extrusion WT02 MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4CustomizationCut to specified length

Satined lens for extrusion JA MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4CustomizationCut to specified length

Satined lens for extrusion AG01 MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4CustomizationCut to specified length

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.