160 manufacturers · 18,987 products

The Ring collection is based on a 25 cm ring that contains a LED light with a 18 cm glass diffuser, creating a space that gives the lamps a visually light look.

BIMU is a simple three-dimensional linear lighting system based on linear components measuring 1000, 1500 and 2000 mm in length and 20 mm in diameter. The linear components are interlinked via a system of fast-connection jacks that allows the light source to be freely rotated on its axis. In addition, the system allows the luminaire to be installed in a stepped format at different heights and angles (its small ears mean the angles are absorbed very naturally). Finishes: Matte black, matte white and black orange.

SENSORWORX wireless power pack controllers switch on/off power to a connected lighting load as directed by wirelessly linked sensors and wall controls. Additionally, the unit’s 0-10V dimming option greatly simplifies applications where dimming control from multiple switch locations is required. For applications where a hybrid wireless/wired architecture is desired, this wireless power pack can also be ordered with auxiliary low voltage connections. The SENSORWORX wireless power pack is rated to switch fully loaded circuits and utilizes a powerful microprocessor to optimize its switching timing, ensuring long relay life even when controlling high-inrush LED lighting. As with all SENSORWORX products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple with snaps for quick installation and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.

SENSORWORX power packs transform incoming line voltage power to low voltage as needed by sensors or other control devices. Additionally, they switch on/off power to the connected lighting load as directed by the sensors and controls. SENSORWORX power packs utilize a powerful microprocessor to optimize its switching timing in order to ensure long relay life even when controlling high-inrush LEDs and ballast loads. As with all SENSORWORX products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.

Introducing our new LDE... the newest and most intelligently designed drip edge luminaire on the market. This is the ultimate combination of lighting and water protection for use over doorways. This design features curved contours that are both modern and highly appealing. Available in multiple lengths to match a given door opening. The LDE is as versatile as it is attractive. Constructed from seam-welded extruded aluminum and aluminum cast end caps. Our quick-mount system facilitates installation and maintenance.

N2M is proud to introduce a new standard in high-quality steel lighting poles. American made steel combined with unwavering accuracy and a wide range of drilling and finish options, make N2M poles the perfect choice for your next project. Our BAA compliant poles are an obvious choice over inferior, imported options.

N2M is proud to introduce a new standard in high-quality steel lighting poles. American made steel combined with unwavering accuracy and a wide range of drilling and finish options, make N2M poles the perfect choice for your next project. Our BAA compliant poles are an obvious choice over inferior, imported options.

N2M is proud to introduce a new standard in high-quality steel lighting poles. American made steel combined with unwavering accuracy and a wide range of drilling and finish options, make N2M poles the perfect choice for your next project. Our BAA compliant poles are an obvious choice over inferior, imported options.

N2M is proud to introduce a new standard in high-quality steel lighting poles. American made steel combined with unwavering accuracy and a wide range of drilling and finish options, make N2M poles the perfect choice for your next project. Our BAA compliant poles are an obvious choice over inferior, imported options.

The XDL4RWL is a recessed wet location LED linear fixture, design with quality craftsmanship. Engineered for quick and easy tool-less installation. The XDL series provides clean lines, smooth continuous runs, and tight lens fitment. Available in continuous runs and custom angles and lengths.

▪ Available in 4000k (neutral white) and 5000k (cool white) color temperatures.* ▪ Long-life LEDs provide 174,000 hours of operation with at least 70% of initial lumen output (L70).** ▪ HBLA-15 delivers 15,297 lumens (140 lumens per watt, LPW) at 4000k, and 15,471 lumens (141 LPW) at 5000k.* ▪ HBLA-23 delivers 22,970 lumens (139 LPW) at 4000k, and 23,223 lumens (140 LPW) at 5000k.* ▪ HBLA-30 delivers 30,394 lumens (140 LPW) at 4000k, and 30,742 lumens (142 LPW) at 5000k.* ▪ Universal 120-277 AC voltage (50-60Hz) is standard.

The LC2BI series is an LED direct/indirect center basket with 2 lenses. Available in 2x2 and 2x4 sizes. Designed for recessed T-grid mounting, with options for flange kits and surface mount shrouds for alternative mounting. The LC2BI series provides soft, balanced lighting for a comfortable light environment and contemporary appearance. With virtually unlimited applications, the LC2BI Series allows architects and designers the freedom to experiment with their designs without exceeding ever decreasing energy budgets.

The SB Series is a Fluorescent Strip available in 1’ thru 8’ body lengths. It was designed for surface or suspended mounting applications.

The LPT8 Series is a T8 Low-Profile Knockdown Fluorescent Strip available in 1' through 8' body lengths. It was designed for surface or suspended mounting applications.

The CB series is a back lit LED flat panel with selectable 3500K, 4000K, or 5000K color temperatures. Designed for recessed, surface mounting, or suspended applications.

The C Series is a LED Panel Fixture available in 1x4, 2x2, and 2x4 body sizes. It was designed for standard surface, suspended and recessed mount applications.

The CLQ is an economical clean room flat panel suitable for ISO class 5-9 positive pressure clean rooms. Selectable CCT and Wattage allow the color and lumen output to accommodate the various needs of clean room applications. Back lit design fully illuminates the flat panel, eliminating hot spots.

The MEZ is an LED healthcare/patient room step light. This fixture is available in low lumen (S or M) output packages, or high lumen (H) output packages to fit the needs of any application. If custom lumen outputs are needing, add desired lumens to end of part number.

A range of small, square and rectangular surface mounted luminaires with options ideal to illuminate the wall and surfaces in front of wall and for light accents on vertical surfaces using high efficiency LED’s. The CLCM is designed for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive wall mounted luminaires.

The RHB Series is a High Performance Fluorescent Recessed High Bay Luminaire The RHB utilizes state-of-the-art fluorescent technology to deliver the highest possible efficiency in the lighting industry. Multiple lensing options are available including diffusers and polycarbonate lenses. The RHB Series integrates seamlessly with today’s modern building management systems. With virtually unlimited applications, The RHB Series allows architects and designers the freedom to experiment with their designs without exceeding ever decreasing energy budgets.

The LHB is an LED full body high bay that is a quality and economical solution for commercial lighting needs. Perfect for applications such as garages, warehouses, gyms, manufacturing space, and large retail spaces. With an enclosed power Supply and covered optics, these light fixtures are designed for durability in commercial or industrial applications. They are designed to save energy and lower maintenance costs. The LED light engine inside this fixture uses 30% less power to produce the same amount of light as a fluorescent fixture. This is a low maintenance solution that eliminates the need to replace power supplies and light bulbs because the light source is integrated in the fixture.

The LUFOHB is a premium round LED high bay luminaire. It is designed to illuminate a wide variety of settings including commercial, industrial and retail settings such as warehouses, manufacturing plants, sporting venues and big-box retailers. With a die cast aluminum housing and clear glass lens, the LUFOHB provides durability and high performance. High-efficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional, HID high bays.

The LBLSS is a low bay solution for linear applications with two optical distributions. The robust construction, high impact lens, and multiple lumen packages makes the LBLSS ideal for both industrial and commercial applications. The LBLSS is available in stand alone or continuous row mounting. The LBLSS is designed for optimal performance and maximum energy efficiency.

The LAPR Series is an architecturally designed recessed perimeter LED luminaire. It is available for continuous run mounting that can be ordered to accommodate nearly any room design.

The LDP4 Series is an architecturally designed recessed perimeter LED luminaire. It is available for continuous run mounting that can be ordered to accommodate nearly any room design. Providing exceptional asymmetric distribution in combination with sleek aesthetics creates a beautiful and functional fixture, that sets a new standard for wall wash luminaires

The 502AE is a stylish choice for any outdoor space. This fixture is available LED and its industrial strength features make it ETL listed and suitable for wet locations. Two lenses on top and bottom of fixture provide uplight and downlight. Advantage's 502AE is designed for wall applications and mounting hardware is included.

Available in LED, Incandescent & GU24 Molded of Durable Non-Corrosive UV Resistant Resins Fits Most 3" Diameter Posts UL Listed for Wet Locations

Available in LED, Incandescent & GU24 Molded of Durable Non-Corrosive UV Resistant Resins Fits Most 3" Diameter Posts UL Listed for Wet Locations

Available in LED, Incandescent & GU24 Molded of Durable Non-Corrosive UV Resistant Resins Fits Most 3" Diameter Posts UL Listed for Wet Locations

The MWV07 Series is a Wall/Vanity LED Luminaire with a smooth white acrylic diffuser.

The MWV13 Series is an LED Wall/Vanity fixture that was designed to be stylish and functional. It is available with multiple lens and finish options, with options for direct, indirect, front light, and direct/indirect.

The MER LED wall mount medical grade luminaire is the perfect solution for the need of durable, aesthetically pleasing, high efficiency light fixtures. The MER utilizes a one piece housing design with your choice of lens. AntiMicrobial paint optional.

The LOBDID is a stylish Direct/Indirect Over-Bed Luminaire available in 2', 3' and 4' lengths. Various customization options allow this versatile fixture to fit into any design. Direct only option features a stylish closed-top design to prevent unwanted uplight.

The MEK Series is a Slotted LED Wall Mount Linear Fixture and is a classically styled fixture fit for any interior. It is available in stand alone or continuous run application minimum of 4' increments. Driven by performance and a clean aesthetic, the MEK series represents the ultimate in simplicity; a narrow, uniform line of light. Constructed with premium materials with industry leading technology, the MEK Series is available in configurable runs. The MEK Series integrates seamlessly with today’s modern building management systems. With virtually unlimited applications, the MEK Series allows architects and designers the freedom to experiment with their designs without exceeding ever decreasing energy budgets.

The MEL LED wall mount is a durable direct/indirect medical grade fixture. The MEL utilizes one piece clamshell housing with various lens options to provide for a stylish and efficient medical fixture. Utilizing the latest in LED technology, the MEL was engineered to be a durable, long lasting, high efficiency medical grade fixture. Ideal for use in any healthcare facility area.

The LWD Series is a 11” LED Wrap available in 2', 4' and 8' length. It is a low-profile, narrow wrap that is designed for surface mounting applications. The LWD utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.

The MLVT Series is a Commercial Grade LED Vapor Tight, gasketed enclosure that is completely dust and moisture resistant. The MLVT utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry

The LWW Series is a 16” LED Wrap available in 4’ body length. It is a low-profile,wrap that is designed for surface mounting applications. The LWW utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.

The LWLP Series is a 16” LED Puff Wrap available in 4’ body length. It is a lowprofile, wrap that is designed for surface mounting applications. The LWLP utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.

The LWB Series is a 9” LED Wrap available in 2' and 4' body lengths. It is a low-profile, narrow LED wrap that was designed for surface mounting applications.

The LUTC is an economical series of undercabinet luminaries for use in kitchens, retail displays and coves. With a painted, steel housing and polycarbonate lens, the LUTC provides durability and high performance. Highefficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional, incandescent or fluorescent undercabinet luminaires.

The BTW is a rugged series of undercabinet luminaries for use in more demanding areas, such as ones with harsh conditions. With a painted, steel housing and polycarbonate lens, and a steel seam-welded cover that fits over the housing, the BTWC provides durability and high performance. Tamper-Proof screws attach the cover to the housing, creating a tough, yet visually appealing fixture.

The BTW is an economical series of undercabinet luminaries for use in kitchens, retail displays and coves. With a painted, steel housing and polycarbonate lens, the BTW provides durability and high performance. Highefficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional, incandescent or fluorescent undercabinet luminaires.

The LDL24RA is an architecturally designed Recessed Aluminum LED Luminaire that is classically styled and fit for any interior. It is available for continuous run mounting.

The MEF4RS Series is an architecturally designed Recessed Steel LED Luminaire that is classically styled and fit for any interior. It is available for continuous run mounting.

The MEF24RS Series is an architecturally designed Recessed Steel LED Luminaire that is classically styled and fit for any interior. It is available for continuous run mounting.

The UDLRS is a recessed germicidal linear louvered luminaire designed and engineered to safely disinfect. Safeguards prevent UV-C output when the room is occupied. Utilizing the latest in powerful germicidal UV technology, the UDL series disinfects fast. Designed to lay into standard t-grid ceilings, with recessed flanged and flangeless trim mounting options available.

The DL4RS is an architecturally designed Recessed Steel Fluorescent Luminaire that is classically styled and fit for any interior. It is available for continuous run mounting

The DL5RS is an architecturally designed Recessed Steel Fluorescent Luminaire that is classically styled and fit for any interior. It is available for continuous run mounting.

The DL6RS is an architecturally designed Recessed Steel Fluorescent Luminaire that is classically styled and fit for any interior. It is available for continuous run mounting.

Available in LED • Powder Coated Cast Aluminum • Wall or Ceiling Mount • Enclosed & Gasketed • ETL Listed for Wet Locations (IP65) • Bug Proof

• Available in LED & Incandescent • White Powder Coated Aluminum • Ceiling Mount Only • Multi-Volt LED Available • UL Listed for Damp Locations • Standard Pack QTY: 8

The AE48 fixture is designed to emulate the look and feel of traditional circline fluorescent tube flushmount fixtures, but operate at a significantly lower wattage. Installation is quick and simple when mounting into standard ceiling junction boxes, and may be installed on circuits with standard wall dimmers. Constructed with a durable housing body and LED lifetime rating of at least 50,000 hours, this rugged flushmount is designed for many years of reliable operation.

The AE46 series of LED round flushmount fixtures are designed to emulate the look and feel of traditional circline fluorescent tube flushmount fixtures, but operate at a significantly lower wattage. Fixtures are available in multiple diameter options, 9”, 15”,and 19”, making the choice easy for any type of application. Installation is quick and simple when mounting into standard ceiling junction boxes, and may be installed on circuits with standard wall dimmers. Constructed with a durable steel housing body and LED lifetime rating of at least 50,000 hours, this rugged flushmount is designed for many years of reliable operation.

Available in LED & GU24 Molded of Durable Non-Corrosive UV Resistant Resins with Powder Coated Aluminum Base Wall or Ceiling Mount UL Listed for Wet Locations

Available in LED, Incandescent & GU24 Molded of Durable Non-Corrosive UV Resistant Resins with Ceiling Mount UL Listed for Damp Locations

One-piece die-formed prime grade material as specified. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contraband concealment.

A beautiful close-to-ceiling luminaire available in multiple sizes makes this the perfect fixture for multifamily and hospitality applications. Available in satin nickel and bronze finishes.

The LELL Series is a 2x2 or 2x4 LED troffer fixture designed for recessed mounting applications. The LELL offers the look and feel of a fluorescent luminaire with a contemporary look that blends with today's commercial spaces. The LELL utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.

The LELV Series is a 2x2 or 2x4 troffer fixture designed for recessed mounting applications. The LELV offers the look and feel of a fluorescent luminaire with a contemporary look that blends with today's commercial spaces. The LELV utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.