160 manufacturers · 18,987 products

The TLCA-WP Series of Angle Iron Cross Arms is designed for use with Techlight lighting fixtures and is intended for field installation on existing wood poles (provided by others). These cross arms are sold individually and are ideal for retrofit or custom installations where Techlight poles are not used.

The FGE was designed as a durable transformer enclosure that could be used in harsh or coastal environments. Available in a wide range of transformer types and wattages.

In ground junction box for hard mounting fixtures with ½” knuckle or stem.

Made with a spun copper housing with stainless steel fasteners and die cast brass 1/2” Stem mount. Designed to efficiently operate PAR36 LED 14W lamps. A high temperature drain plug is provided for uplight applications. Internal driver is ETL listed for wet locations (IP67). Meets US and Canadian safety standards. -40°C to 40°C ambient operation.

Retrofit Kits are a great way to modify an existing fixture to save time and energy.

The LUVM Series Module was conceived to replace the 175W R40 Clear Mercury Vapor utilized to create moonlight effects. The module can be retrofitted into existing R40 bullet fixtures, or it can be installed in new construction installations using several brands of Techlight R40 bullet housings. It's primary usage is for tree lighting applications where mounting height requires high lumen output.

The RTB-Q is designed for mounting floodlights and other luminaires to wood utility poles using a right-angle configuration. It is ideal for temporary data center sites and other rapid-deployment environments across the country, where durable, easy-to-install lighting infrastructure is essential. Compatible with most Techlight product families (contact your sales associate for compatibility details).

Retrofit Kits are a great way to modify an existing fixture to save time and energy.

LED Strip Retrofit Kits are a great way to modify an existing fixture to save time and energy. With 50,000 hours of life at L70 standard and a 5-year limited warranty the fixture maintenance cost is reduced substantially over time.

Die cast zinc housing. Offered standard with either a die cast long shield or die cast flush shield.

Made with a die cast aluminum housing with stainless steel fasteners. Designed to efficiently operate PAR38 and R40 lamps. A high temperature drain plug is provided for uplight applications. A sturdy knuckle mount with locknut is provided for a secure installation. ETL listed for wet locations.

The high performance luminaire is designed for full cutoff applications where long life, low maintenance, and consistent color rendering are required. Areas with limited accessibility due to fixture location or where heavy pedestrian traffic makes maintenance difficult are ideal applications such as building facade lighting or wall mounted security lighting. The contemporary design style of the luminaire allows it to be seamlessly integrated into existing systems when necessary.

Made with a spun copper housing with stainless steel fasteners and die cast brass 1/2” Stem mount. Designed to efficiently operate PAR36 LED 14W lamps. A high temperature drain plug is provided for uplight applications. Internal driver is ETL listed for wet locations (IP67). Meets US and Canadian safety standards. -40°C to 40°C ambient operation.

The high performance luminaire is designed for refrigerated environments where the normal operation ambient temperature is below 60°F. The low 1.75” luminaire profile minimizes the chance for luminaire damage due to operational traffic. The luminaire’s sloped walls further help by forcing the contact object to slip under the luminaire.

The LEDH-CFK8 is an 8“ LED, Non-IC Commercial Flat Frame-in Kit and is available with multiple Trim styles. Designed for use in non-insulated ceilings, Insulation material must be kept a minimum of 3” from fixture. Available with a 14W, 23W, 30W or 45W high efficacy LED engine and universal, dimmable drivers. The special optical diffuser produces high lumen transmission and even illumination. Suitable for Wet Locations.

The FSPENCA277V is designed for use in conjunction with LED Drivers to provide an additional level of protection against powerline disturbances in industrial and commercial applications. Also protects electronic fluorescent and HID ballasts.

The LWW Series Linear LED Wall Wash is designed for illuminating architectural surfaces and commercial signage. Areas with limited accessibility due to fixture location or where heavy pedestrian or vehicle traffic makes maintenance difficult are ideal applications. The low-profile design keeps the fixture placement discrete for both ground and wall mounted applications.

Retrofit Kits are a great way to modify an exsisting fixture to save time and energy.

The TLLET75 and TLLET150 Electronic Low Voltage AC Transformers are ideal for quick installs into bell boxes or existing enclosures. Small projects are made quick and effortless with simple mounting and wiring.

The housing is made of compression molded fiber reinforced polyester composite. The color impregnated SR2 composite will not flake or peal. Multiple ring/guard assemblies are available for a customizable trim finish.

The LWDHB brings the benefits of gasketed enclosures to High Bay and Low Bay applications. Ideal for use in high mounting height environments where dust, dirt, or moisture is present including food processing, cold storage, sports concourses, manufacturing, and industrial.

Made with a die cast aluminum housing with stainless steel fasteners. Designed to efficiently operate PAR30 lamps. A high temperature drain plug is provided for uplight applications. A sturdy knuckle mount with locknut is provided for a secure installation. ETL listed for wet locations.

The TLLET75 and TLLET150 Electronic Low Voltage AC Transformers are ideal for quick installs into bell boxes or existing enclosures. Small projects are made quick and effortless with simple mounting and wiring.