160 manufacturers · 18,987 products

For existing housings, retrofit adapters allow the LED Modules to be easily installed.

The HALO RLD Deep Baffle LED Trims are designed with optical performance at their heart. The deeply regressed lens provides uniform illumination and a 50-degree optical cutoff that reduces glare and improves visual comfort. These modules are shipped with both a white and black Coilex baffle insert. They're also wet location rated for installation above a shower or covered outdoor areas and AIR-TITE for added savings and code compliance.

Splay trim for use with R and PAR lamps in H5 series housings. Dual position socket support for R and PAR lamps.

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. The Two Circuit Live End Connector is used to start a Trac run.

5" Splay socket supporting with self-flange ring.

5" White PAR20 eyeball, self-flange ring with a 35-degree maxium tilt.

Straight Perforated Bafle, Self-flange

6" Full reflector open wet location shower with deep self-flange ring

5" Open with self-flange ring.

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. Join three trac sections with left hand polarity with the Left T Connector.

The Bachetta series of lampholders offers the beauty and functional design that sophisticated spaces require. The Bachetta family includes lampholders that support 12V MR16 and PAR30/38 lamps. The light weight and small size of this lampholder family makes them ideal for use in museums, galleries, malls, exhibits and similar areas where high interior light is needed. Trim options include color filters, optical lenses and baffle.

Smart control made simple. The Pure Smart™ Wi-Fi ON/OFF Switch upgrades any standard light to smart functionality with no hub required. From the wall, the app, or your voice, control traditional lighting loads with ease — while unlocking scheduling, grouping, and automation through the WiZ ecosystem. Designed for pros but simple enough for anyone, this switch brings smart convenience to every room.

For use with L4007 to attach L1967 Barn Doors or L200 Series uv/color filters or L275 louver.

5" Shallow full cone baffle with self-flange ring

Lensed showerlight trim for 120V line voltage 4" H99 family recessed housings. Non-conductive, non-corosive polymer trim available in a variety of finishes. Pebble finish glass lens and full reflector for even light distribution. The 951 trim is wet location listed for use as a showerlight. Three “cat’s paw” springs secure trim in housing.

The HLC Tapered Disk Lights deliver a low-profile, flush ceiling finish with ultra-fast installation from below the ceiling. Designed for high-volume residential applications, they mount directly to compatible junction boxes with no clips or plates required. The twist-release lens allows quick access to the 5-position CCT switch, making color selection simple. Available in economical bulk packs for streamlined contractor installs.

The HALO Outdoor LED Vapor Tight Floodlight provides an indoor/outdoor solution in applications where lighting fixture protection is required. The fixture provides equivalent light output to a 100-watt incandescent and 23-watt CFL fixture, with high-quality long lasting illumination. The fixture is vapor tight protecting against dust and moisture. This fixture’s traditional look and warm color temperature gives consumers the comfort of lighting they are used to. This fixture is ideal for patios, garages, storage, and industrial areas.

300 Watt PAR, plastic twin head floodlight with photo control.

The HALO Outdoor™ LED high-performance, low-maintenance entry and patio light provides a dependable and reliable security solution with nighttime ON and daytime OFF settings. Suitable for mounting heights up to 10ft., and replaces 60W incandescent or 13W CFL area lights. FE0650LPC series entry and patio light’s design and aesthetics are perfect for retrofitting them into existing residential and light commercial buildings.

150 Watt PAR, metal security floodlight.

HALO Outdoor’s new patent-pending LED Area and Wall Light combines high performance optics with super bright energy-efficient LEDs. Its rugged user friendly construction has a dusk to dawn photocontrol for nighttime ON and daytime OFF settings that provides a reliable security solution. This fixture provides larger area coverage than standard 84W CFL, 175W mercury vapor and 300W incandescent area lights while achieving substantial energy and maintenance savings. Perfect for illuminating large areas like barns, side roads, pathways or security lighting.

The Ethernet Interface Module (EIM) provides secure serial-to-ethernet data transmission to enable data exchange between Keeper Enterprise, Greengate programming software application, and the Greengate panels. The device supports the SSL and SSH protocols, which work by encrypting data before sending it over the ethernet network.

The Distributed Low-Voltage Power System utilizes pre-terminated low-voltage lighting cables for safe, flexible LED lighting installations. Low-voltage lighting cables provide for fast, error free installation of LED light fixtures. Cables are available in pre-terminated lengths typical to application / fixture type for error free connectivity of Class 2 circuits in plenum rated applications.

The WBSD-010-CCT Slide Controller provides intuitive full-range classic linear-slide control of 0-10V compatible Correlated Color Temperature (CCT) capable light sources. These slider control units are ideal for commercial lighting applications and are compatible with decorator style devices and wall plates.

The screwless wallplate is a system accessory for Greengate wall box devices. The wallplate fits a standard decorator opening or toggle opening and provides a contemporary, sleek design. Screwless wallplates appear to float freely on the surface of the wall and are designed for easy and fast installation. Mounting plate attaches to the device and the wallplate is simply pressed into place.

Linear Dimming Control Module Plenum Rated (LDCM-PL) takes a 0-10V dimming signal and converts it to an ELV dimmed output for up to 1000W with a 277V load and 450W on a 120V load. The LDCM-PL is rated to directly mount to a junction box in a plenum space for easier installations and to meet building requirements.

The DALI Installation Checker is a web application that provides a simple way for electrical contractors to test the DALI buses, obtain a list of the devices connected to each DALI bus and compare the as-installed configuration to the as-designed. The tool will allow electrical contractor to eliminate all DALI wiring deficiencies prior to the arrival of the factory specialist hence ensuring on-time startup of a DALI based lighting system.

The Fifth Light Central Manager is a server-class PC that hosts the Lighting Management Software (LMS). It acts as a system wide historian and global database that holds the system's event journal, system configuration files and interfaces used to interact with third-party applications. The third-party interfaces include BACnet, Web services (XML), Cisco® VoIP, MechoSystems, Somfy® and Embedia. The Central Manager allows users to manage their Fifth Light system via the LMS web-based user interface. All configuration changes made from the Central Manager are then synchronized with each local controller on the system. Similarly all data changes at the local controller level are synchronized in real-time with the Central Manager. The Central Manager provides the capability for: BACnet integration of lighting, Web Services control of lighting, Support for Cisco VoIP phones to control lighting, Centralized shade control along with lighting, and Access from computer browser, mobile phones and tablets.

The Field Relay provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The TSE57 Fifth Light touchscreen provides an elegant and discreet light control for any WaveLinx controlled space. The portrait-oriented 5.7” (14.5cm) touchscreen features a low-profile design with edge to edge glass and an extremely responsive display making it a great architectural addition to conference rooms, executive offices and open spaces.

The Digital Wallstation offers the specification grade range of wallstations, which combines the easiest user interface in the industry with a large circular On/Off button, a universal module with up to 10 button configurations, large or small button options and engraving. Designed to fit with standard decorator wallplates, Wallstations can be ganged together to meet specific project needs. Individual buttons have backlight indicator lights and strong tactile feedback.

The Shade Interface allows users to integrate the Fifth Light system with leading shade control systems providers, i.e. MechoSystems, Somfy® and Embedia. It allows users to send comprehensive commands (up, down, go to scene, position and stop) to the shade controllers from a DALI Wallstation or a Low Voltage Wallstation.

FLR Fully Luminous Recessed luminaire, with a clear bottom lens for added protection, can be used in a variety of medical / cleanroom, wet location, or high abuse applications. Choose from 3 sizes and a host of lumen packages and color temperatures, to perfectly suit your needs

The UC1 provides effective LED task lighting in a variety of environments. Constructed with minimal 3/4" depth and durable IK10 rated housing and lens. 24", 36", 48" lengths for use in confined spaces. UC1 comes with selectable CCT and dim to warm ELV/Triac (120V only) making it an excellent choice for a plethora of applications.

The Circadian LED nightlights bring soft, low-level illumination to any environment. Fitting into a standard junction box (single-gang, handy box, 2-inch minimum inside width) for easy installation, the Circadian Series offers up to 30 lumens of illumination. Specify the thru-wall junction box to use two night lights on opposing sides of the wall with one junction box.

MRI 4" and 6" aperture round downlight, perfect for your MRI suite. Non-ferrous construction, remote drivers and driver enclosures, and MRI filters to complete the job. 4" downlight to 2500 lumens and the 6" downlight delivers up to 4000 lumens. Available 1% dimming, dim to off, and DALI drivers are available. IP65 rated for ingress protection and NSF for easy cleaning and wipe-down

FailSafe ArcMed Sealed InDepth allows for the use of the stylish InDepth luminaire in complex environments such as behavioral health, sterile environments, healthcare, food service/processing/prep, and general wet location environments. Sealed clear bottom lens provides physical protection and also provides dust and water ingress protection.

The Fail-Safe FCZ is a sealed, IP65 rated center basket troffer with high performance, visual comfort and aesthetics. Offered in three different sizes, multiple lumen packages, and optional polycarbonate lenses, the FCZ is an excellent choice for a wide range of applications including vandal-resistant, behavioral health, medical, cleanroom, and hose down.

The Fail-Safe EXL offers buyers one of the best high-abuse, specification-grade exit signs on the market. Its architectural low profile combines 14-gauge steel and a 1/8-inch polycarbonate lens to withstand the toughest environments. The door attaches to the housing with four tamper-resistant fasteners. LEDs power the unit for energy-efficient, even illumination. These fixtures are UL/cUL listed for damp locations. The EXL is specifically designed for use in public access areas where safety and security are critical; it is ideal for use in maximum security correctional facilities, public housing, schools, psychiatric wards, detention centers, military barracks, parks, and hospitals.

A sealed recessed Encounter luminaire is accomplished by precisely adhering a clear lens to the fixture bottom. Wet location under covered ceiling standard. Choose from a variety of clear lenses - acrylic or polycarbonate. IP66 standard, NSF listed, Class 100 rated (ENC)

The UCL and UCLV provide effective LED task lighting in many environments. Steel, stainless steel or aluminum construction for years of trouble-free operation. 1', 2', 3', or 4' length for use in a variety of confined spaces. UCL utilizes solid front design with lift-and-shift lens. UCLV, with its solid front design, incorporates a captive lens with 4 screws to secure the cover to the housing.

The Fail-Safe SSB/SPC represents security wiring device hardware for institutional applications. These devices are designed for vandal-resistant applications. When used with pick-proof chalking, the finished installation provides an effective and safe means of protection against vandalism by occupants and against the facility property. Manufactured for use in steel wall, concrete block or poured wall construction, the SSB/SPC prevents costly replacement of essential electrical devices.

6 inch LED recessed downlight designed for operating room applications. Featuring a two-stage reflector with excellent light control and low aperture brightness. Lumen packages up to 7000 lumens with color temperatures of 3000K, 3500K, 4000K, and 5000K. Available with dim-to-warm technology, the 3000K LED warms smoothly as dimmed to 1850K, creating a warm glow within the space. IP66 compliant standard, NSF and MILSTD461G available.

Fail-Safe's CLM surface and recessed sealed enclosure luminaire is available with overlapping and inset doors. Available in 1x2, 1x4, 2x2, and 2x4 sizes, the CLM is Class 100 rated, ISO Class 5-8, IP65 compliant, and NSF rated.

Fail-Safe HVSL4 combines beauty and robustness in a small scale design. Steel end caps and steel body provides strength while an extruded linear ribbed polycarbonate lens obscures the LED image and spreads light evenly. Ideal for areas where the need for aesthetics and protection from vandalism are critical. Perfect for schools, mental health facilities, hospitals, corridors, dormitories, public rest rooms, common areas, and transit stations

The Fail-Safe FMS combines maximum security construction features with energy saving technology. Utilizes a one-piece housing, security lensing and tamper resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. ETL listed for damp locations, wet location under covered ceiling optional.

The Fail-Safe VRVT4 is designed to withstand environmental stress for years to come. VRVT4 is tightly sealed with a closed cell foam in place gasket and is equipped with tamperproof latches standard and impact resistant lenses, as well as optional narrow spectrum color LEDs for vivariums and certain types of specialty materials production. These features allow the VRVT4 to be used in a wide variety of vaportite applications where a standard product would not be sufficient.

FMB Wall LED combines maximum security construction features with energy saving LED technology. One piece clamshell housing, security lensing and tamper-resistant hardware to maximize impact resistance and prevent contraband concealment and unauthorized entry. ETL listed for damp locations.

Fail-Safe HVSL provides style with strength. Steel end caps and steel body provides strength while an extruded linear ribbed polycarbonate lens obscures the LED image and spreads light evenly. Ideal for areas where the need for aesthetics and protection from vandalism are critical. Perfect for schools, mental health facilities, hospitals, corridors, dormitories, public rest rooms, common areas, and transit stations

B95 combines LED technology with impact resistant construction in an aesthetically pleasing design. Injection molded lens provides protection against physical abuse, and has a lifetime warranty. UL listed for wet locations and IP65 ingress protection rated

H12 is a traditional surface mount LED high abuse luminaire perfect for new construction or retro-fit opportunities. Die-cast aluminum back box (shallow, deep version), polycarbonate lens, and tamperproof hardware ensures a tough, robust luminaire that is built to last in the most demanding environments

The Fail-Safe VRVT3 is designed to withstand environmental stress for years to come. VRVT3 is tightly sealed with a closed cell foam in place gasket and is equipped with tamperproof latches standard and impact resistant lenses, as well as optional narrow spectrum color LEDs for vivariums and certain types of specialty materials production. These features allow the VRVT3 to be used in a wide variety of vaportite applications where a standard product would not be sufficient.

Designed with aesthetics as a high priority, the tasteful FVS8 combines style with strength. With architectural matte white paint standard, allow the FVS4 in either 16 or 18 gauge steel to operate in the most demanding environments. Thick polycarbonate lenses protect the fixture from high abuse situations, Continuous run the fixtures using the end KOs, and choose from 2', 3', 4', and 8' lengths

FCC LED combines security construction features with energy savings technology. This corner mount fixture uses a one-piece clamshell housing, security lensing, and tamper-resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. Energy efficient LEDs and standard 0-10V dimming driver make this corner correctional fixture the ideal choice for your next project.

ASL4 provides an aesthetically pleasing solution to your demanding and challenging environments. Aluminum extruded housing from 1' to 8', individual or continuous mount, surface or suspended, ambient operating temperatures to 50C, up to 3500 lumens / linear foot, a multitude of LED color temperatures -- ensures a long-lasting luminaire that exceeds expectations

The Fail-Safe MWL Medical Wall LED is an excellent choice for headwall mounted bed lighting. The MWL provides both direct and indirect lighting, with a variety of options for patient control, including pull chains and low voltage relays. Additional optional features, including a Wavelinx Wireless Driver and VividTune White Tuning Technology, allow the fixture to be specified to meet the needs of a wide variety of facilities.

Designed with aesthetics as a high priority, the tasteful FVS4 combines style with strength. With architectural matte white paint standard, allow the FVS4 in either 16 or 18 gauge steel to operate in the most demanding environments. Thick polycarbonate lenses protect the fixture from high abuse situations. Continuous run the fixtures using the end KOs, and choose from 2', 3', 4', and 8' lengths.

The Fail-Safe VRVT2 is designed to withstand environmental stress for years to come. VRVT2 is tightly sealed with a closed cell foam in place gasket and is equipped with tamperproof latches standard and impact resistant lenses, as well as optional narrow spectrum color LEDs for vivariums and certain types of specialty materials production. These features allow the VRVT2 to be used in a wide variety of vaportite applications where a standard product would not be sufficient.

G12 LED combines architectural styling, strength, and energy saving technology. Injection molded polycarbonate lens obscures LED image and spreads light uniformly. UL listed for wet locations, IP65 rated. Perfect for use in corridors, dormitories, public rest rooms, public gathering areas, loading docks, locker rooms, schools, canopies, minimum security facilities

FUSL LED combines maximum security construction features with energy savings technology. This surface mount luminaire utilizes a four-sided, sloped clamshell housing, security lensing and tamper-resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. UL listed for damp locations.