Line Card
160 manufacturers · 18,987 products
Search
Product TypeAll types▾
3,544 products
BrandAll▾
SortRelevance▾
SENSORWORX wireless power pack controllers switch on/off power to a connected lighting load as directed by wirelessly linked sensors and wall controls. Additionally, the unit’s 0-10V dimming option greatly simplifies applications where dimming control from multiple switch locations is required. For applications where a hybrid wireless/wired architecture is desired, this wireless power pack can also be ordered with auxiliary low voltage connections. The SENSORWORX wireless power pack is rated to switch fully loaded circuits and utilizes a powerful microprocessor to optimize its switching timing, ensuring long relay life even when controlling high-inrush LED lighting. As with all SENSORWORX products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple with snaps for quick installation and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.
SENSORWORX power packs transform incoming line voltage power to low voltage as needed by sensors or other control devices. Additionally, they switch on/off power to the connected lighting load as directed by the sensors and controls. SENSORWORX power packs utilize a powerful microprocessor to optimize its switching timing in order to ensure long relay life even when controlling high-inrush LEDs and ballast loads. As with all SENSORWORX products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.
Introducing our new LDE... the newest and most intelligently designed drip edge luminaire on the market. This is the ultimate combination of lighting and water protection for use over doorways. This design features curved contours that are both modern and highly appealing. Available in multiple lengths to match a given door opening. The LDE is as versatile as it is attractive. Constructed from seam-welded extruded aluminum and aluminum cast end caps. Our quick-mount system facilitates installation and maintenance.
The XDL4RWL is a recessed wet location LED linear fixture, design with quality craftsmanship. Engineered for quick and easy tool-less installation. The XDL series provides clean lines, smooth continuous runs, and tight lens fitment. Available in continuous runs and custom angles and lengths.
The LC2BI series is an LED direct/indirect center basket with 2 lenses. Available in 2x2 and 2x4 sizes. Designed for recessed T-grid mounting, with options for flange kits and surface mount shrouds for alternative mounting. The LC2BI series provides soft, balanced lighting for a comfortable light environment and contemporary appearance. With virtually unlimited applications, the LC2BI Series allows architects and designers the freedom to experiment with their designs without exceeding ever decreasing energy budgets.
The SB Series is a Fluorescent Strip available in 1’ thru 8’ body lengths. It was designed for surface or suspended mounting applications.
The LPT8 Series is a T8 Low-Profile Knockdown Fluorescent Strip available in 1' through 8' body lengths. It was designed for surface or suspended mounting applications.
The LPT5 Series is a T5 Low-Profile Knockdown Fluorescent Strip available in 2’ thru 8’ body lengths. It was designed for surface or suspended mounting applications. Outdoor facilities, high rise garages, building exteriors, educational facilities, recreational facilities, and other intensive use environments are the perfect types of environments for the fixture of this nature.
The CS Series is a Commercial Strip available in 2’ through 8’ body lengths. It was designed for surface or suspended mounting applications.. Outdoor facilities, high rise garages, building exteriors, educational facilities, recreational facilities, and other intensive use environments are the perfect types of environments for the fixture of this nature.
The CB series is a back lit LED flat panel with selectable 3500K, 4000K, or 5000K color temperatures. Designed for recessed, surface mounting, or suspended applications.
The C Series is a LED Panel Fixture available in 1x4, 2x2, and 2x4 body sizes. It was designed for standard surface, suspended and recessed mount applications.
The CLQ is an economical clean room flat panel suitable for ISO class 5-9 positive pressure clean rooms. Selectable CCT and Wattage allow the color and lumen output to accommodate the various needs of clean room applications. Back lit design fully illuminates the flat panel, eliminating hot spots.
The MEZ is an LED healthcare/patient room step light. This fixture is available in low lumen (S or M) output packages, or high lumen (H) output packages to fit the needs of any application. If custom lumen outputs are needing, add desired lumens to end of part number.
A range of small, square and rectangular surface mounted luminaires with options ideal to illuminate the wall and surfaces in front of wall and for light accents on vertical surfaces using high efficiency LED’s. The CLCM is designed for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive wall mounted luminaires.
The RHB Series is a High Performance Fluorescent Recessed High Bay Luminaire The RHB utilizes state-of-the-art fluorescent technology to deliver the highest possible efficiency in the lighting industry. Multiple lensing options are available including diffusers and polycarbonate lenses. The RHB Series integrates seamlessly with today’s modern building management systems. With virtually unlimited applications, The RHB Series allows architects and designers the freedom to experiment with their designs without exceeding ever decreasing energy budgets.
The LHB is an LED full body high bay that is a quality and economical solution for commercial lighting needs. Perfect for applications such as garages, warehouses, gyms, manufacturing space, and large retail spaces. With an enclosed power Supply and covered optics, these light fixtures are designed for durability in commercial or industrial applications. They are designed to save energy and lower maintenance costs. The LED light engine inside this fixture uses 30% less power to produce the same amount of light as a fluorescent fixture. This is a low maintenance solution that eliminates the need to replace power supplies and light bulbs because the light source is integrated in the fixture.
The LUFOHB is a premium round LED high bay luminaire. It is designed to illuminate a wide variety of settings including commercial, industrial and retail settings such as warehouses, manufacturing plants, sporting venues and big-box retailers. With a die cast aluminum housing and clear glass lens, the LUFOHB provides durability and high performance. High-efficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional, HID high bays.
The LBLSS is a low bay solution for linear applications with two optical distributions. The robust construction, high impact lens, and multiple lumen packages makes the LBLSS ideal for both industrial and commercial applications. The LBLSS is available in stand alone or continuous row mounting. The LBLSS is designed for optimal performance and maximum energy efficiency.
The LAPR Series is an architecturally designed recessed perimeter LED luminaire. It is available for continuous run mounting that can be ordered to accommodate nearly any room design.
The LDP4 Series is an architecturally designed recessed perimeter LED luminaire. It is available for continuous run mounting that can be ordered to accommodate nearly any room design. Providing exceptional asymmetric distribution in combination with sleek aesthetics creates a beautiful and functional fixture, that sets a new standard for wall wash luminaires
The 502AE is a stylish choice for any outdoor space. This fixture is available LED and its industrial strength features make it ETL listed and suitable for wet locations. Two lenses on top and bottom of fixture provide uplight and downlight. Advantage's 502AE is designed for wall applications and mounting hardware is included.