160 manufacturers · 18,987 products

E-Flex Impress Link Mode  Capacitive Touch  No Mechanical Buttons  Backlit Legends  Custom Legends  Infrared Remote  Non-volatile Memory  AV Interfacing  iOS, Android App

The Solitaire Impress modular dimming system provides 18-preset dimming control, with capacitive touch buttons and sliders. Master controllers are available with six, 0-10V (Soli 10V) or phase control outputs (STM6) and have a 2000-watt load capacity with up to 800 watts per channel. The 0-10V version (Soli 10) is an industry first providing a single solution for mixed 0-10 and DMX LED applications with a UL electronic ballast rating. The Soli 10V master was recognized in the 2013 IES progress report. A DMX only master (Soli DMX) is also available.

The Solitaire Impress power modules provide expanded dimming capability to Lehigh’s Solitaire Impress modular dimming system. Solitaire Impress master stations are capable of up to 800W per channel, with a maximum of 2000W at 120V while the Solitaire Impress power modules operate at 16A, 120V or 277V. In addition, these power modules provide various dimming control solutions including standard leading edge (forward phase), trailing edge (reverse-phase/ELV), 0-10V fluorescent and LED, 2, 3, and 4-wire fluorescent, and non-dim for any application. The dual 0-10V module can provide up to 2000W single zone or split on two zones for 4-wire LEDs or fluorescent fixtures.

Lehigh's DX3 dimming system builds on the foundation of the successful DX2 system offering improved performance with a 600Mhz ARM Cortex-A8 processor and dedicated three-phase dimming controller, RDM support, USB ports, Ethernet, built-in ride-thru circuit, and a capacitive touch user interface for system configuration.

FLX S consoles are easy to learn and simple to use - delivering all the features you need at an affordable price. FLX S24 is flexible, offering a powerful LED and moving light controller in a small 19" unit with direct access to each of the lights in your rig. FLX S48 has double the power of the FLX S24 with intuitive and hands-on control of up to 96 fixtures, and a touch monitor output to provide quick access to palettes and an overview of the show.

The Ethernet Interface Module (EIM) provides secure serial-to-ethernet data transmission to enable data exchange between Keeper Enterprise, Greengate programming software application, and the Greengate panels. The device supports the SSL and SSH protocols, which work by encrypting data before sending it over the ethernet network.

The TracKeeper™ current limiting panel for track lighting allows designers to easily meet energy codes. Limiting the branch circuit volt-ampere rating with the TracKeeper™ provides you with a fixed power consumption limit for your installation as opposed to calculated values based on watts per linear foot of track. Additionally, the use of high efficiency luminaries will often yield a lower watts/linear foot number than is specified in the code. Available in either 16 or 32 circuit panels.

The screwless wallplate is a system accessory for Greengate wall box devices. The wallplate fits a standard decorator opening or toggle opening and provides a contemporary, sleek design. Screwless wallplates appear to float freely on the surface of the wall and are designed for easy and fast installation. Mounting plate attaches to the device and the wallplate is simply pressed into place.

The Greengate Patient Control Station provides the hospital patient or nursing home resident easy control over their lighting controls and shades with the added security of a standard connection to the Nurse Call system and the comfort of a universal TV controller. The patient control station provides large clearly labeled buttons in a fully sealed case.

Linear Dimming Control Module Plenum Rated (LDCM-PL) takes a 0-10V dimming signal and converts it to an ELV dimmed output for up to 1000W with a 277V load and 450W on a 120V load. The LDCM-PL is rated to directly mount to a junction box in a plenum space for easier installations and to meet building requirements.

The DALI Installation Checker is a web application that provides a simple way for electrical contractors to test the DALI buses, obtain a list of the devices connected to each DALI bus and compare the as-installed configuration to the as-designed. The tool will allow electrical contractor to eliminate all DALI wiring deficiencies prior to the arrival of the factory specialist hence ensuring on-time startup of a DALI based lighting system.

The Fifth Light Central Manager is a server-class PC that hosts the Lighting Management Software (LMS). It acts as a system wide historian and global database that holds the system's event journal, system configuration files and interfaces used to interact with third-party applications. The third-party interfaces include BACnet, Web services (XML), Cisco® VoIP, MechoSystems, Somfy® and Embedia. The Central Manager allows users to manage their Fifth Light system via the LMS web-based user interface. All configuration changes made from the Central Manager are then synchronized with each local controller on the system. Similarly all data changes at the local controller level are synchronized in real-time with the Central Manager. The Central Manager provides the capability for: BACnet integration of lighting, Web Services control of lighting, Support for Cisco VoIP phones to control lighting, Centralized shade control along with lighting, and Access from computer browser, mobile phones and tablets.

The Field Relay provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The TSE57 Fifth Light touchscreen provides an elegant and discreet light control for any WaveLinx controlled space. The portrait-oriented 5.7” (14.5cm) touchscreen features a low-profile design with edge to edge glass and an extremely responsive display making it a great architectural addition to conference rooms, executive offices and open spaces.

The Shade Interface allows users to integrate the Fifth Light system with leading shade control systems providers, i.e. MechoSystems, Somfy® and Embedia. It allows users to send comprehensive commands (up, down, go to scene, position and stop) to the shade controllers from a DALI Wallstation or a Low Voltage Wallstation.

In-Wall DMX Controller with a minimalist design that packs a punch. The TivoCUE 2 is a 1 zone, programmable, DMX 512 controller that is capable of playing up to 99 scenes. Each scene can be modified by touching the mode button to change dimming range and color. The large center display indicates what scene you are playing. Compatible with Tivoli’s CUE software and available for download on both MAC and PC.

Flat, wall-mounted lighting controller. The TivoCUE 1 is a 4 zone, DMX 512 controller that is capable of playing up to 16 scenes.

The ultimate control tool for your LED lighting using pixel mapping at its best in 2D or 3D. An award-winning software for generative visuals and effects, and leading LED lighting controller. From the smallest projects to the biggest ones – get the best out of your LEDs. MADRIX 5 can produce a complete LED light show from a normal computer or laptop. Still, it can drive tens of thousands of LEDs without problems. This powerful software will not only allow you to control nearly any 2D LED display in every possible way, but real 3D LED applications as well. This makes it the ideal solution for your LED project.

Cue™ and CuePro™ software are specifically designed for the TivoCUE™ in-wall DMX controls and includes an array of tools required by the latest DMX lighting fixtures. Intuitive, with easy-to-use effects that can be dropped into timelines, and multi-zone synchronization capabilities allow you to program a project effortlessly.

The TivoCUE 10 is the flagship controller from Tivoli. Integrating a color display and compatibility with all Tivoli computer software and mobile apps, the controller has been designed to accept the most challenging projects with ease.

TheRDS 6is an RDM/DMX splitter and optimizer with a wired digital communication network. It features one RDM/DMX input and six outputs, allowing for the flexible configuration of your RDM/DMX signal. Each port is electrically isolated to ensure you get the maximum total run of 3,900' for each signal line. Point to point Split your DMX signal six ways for easy placement of fixtures over a large area. Boost your signal Each of the six output ports optimizes and boosts the DMX singal Power onboard The internal AC to DC converter allows for quick AC installation from 100-240VAC

TheAria Wireless DMXsystem is a compact, local, outdoor-rated wireless DMX system. The Aria transceiver can act as both the sending and receiving point, and you can select up to 15 channels on the 2.4 GHz band. The internal wireless radio features both automatic networking and signal routing optimization to ensure the best possible reception of DMX data. A 5dB, omni-directional antenna is included, which provides transmission up to 2600’ line of sight and 300’ between obstructions and walls. Aria can also make a direct connection (without the need for an additional unit) to compatible fixtures such as the Dyna Drum HO, Dyna Drum SO, Dyna Accent, and Dyna Accent Mini which have the internal receiver built-in. Over the air Transmit DMX control signal up to 2,600' (line of sight) and instantly connect to any Aria Direct Connect fixture Link 'em up Up to 250 connection points in a system and utilize up to 8 universes with multiple transmitters Ready for the elements IP66 (wet location) and IK07 impact protection standard

The Pharos TPS (Touch Panel Station) is an elegant interface with a customizable, 4.3” capacitive touch screen, that works with any Pharos Controller. The TPS is available in a range of different colored bezels and overlays. Install is easy and convenient as the TPS only requires a single Power-over-Ethernet (PoE) network connection. The customizable touch screen user interface lets you create multiple pages of controls, configure their appearance and get immediate visual feedback. The controls then allow you to trigger and adjust scenes, timelines, overrides and a myriad of other functions that are part of your control system. Stay in control Take control of any Pharos unit directly from your wall, designed to run 24/7. Dive into the details Windows and Mac compatible software application opens up a world of advanced customization. You’ve got options Select from a range of bezels and overlays.

ThePharos EXTis an extension for the Pharos TPC and together they form a standalone, mains-powered lighting controller with versatile output and show control options. The TPC is a powerful lighting controller with Ethernet-based output and integration options. However, many DMX and DALI installations don’t need the added complexity of network infrastructure. The EXT provides local DMX and DALI output for the TPC, as well as power and other hardware interfaces. The EXT connects to its TPC via a Cat 5e or Cat 6 cable, which carries power and data. The EXT is powered from 100-240VAC mains. In addition to DMX output for the TPC’s 512 control channel capacity, the EXT supports a DALI bus connection to send & receive DALI control messages. Other interfaces are RS232 serial and 8 digital/analog inputs for triggering the TPC. The EXT also has its own Ethernet interface to allow some or all of the TPC’s control channels to be sent as eDMX. The EXT requires no additional configuration in the Pharos Designer software – everything is programmed via the TPC in the Designer project file, as if the TPC supported all the additional hardware interfaces directly. The EXT is provided in a compact DIN-rail compatible housing for mounting within an electrical cabinet, or alternatively, it can be wall-mounted. For easy installation, most connections are provided as plug-strips. The solid-state design with efficient, embedded firmware ensures unparalleled reliability.

ThePharos LPC X(Lighting Playback Controller X) offers an extreme level of power and integration, making it an ideal solution for landmark lighting installations with significant channel counts. It integrates with the full range of Pharos products and offers an optional real-time video input.Stay in control 10 to 100 universes. Designed to run 24/7. Dive into the details Windows and Mac compatible Designer 2 software application opens up a world of advanced programming options Get in touch Optional TPS wall-mounted touch panel makes it easy to interact with your lighting

The Pharos LPC (Lighting Playback Controller) is an award-winning, all-in-one control solution for themed entertainment and LED lighting installations. It features individually controllable and independently running timelines and scenes, letting you build dynamic, precise, fully customizable pre-programmed lighting effects with the freedom of real-time manual overrides and the versatility of powerful show control and integration features. Stay in control 1, 2, or 4 universes. Designed to run 24/7. Dive into the details Windows and Mac compatible Designer 2 software application opens up a world of advanced programming options Get in touch Optional TPS wall-mounted touch panel makes it easy to interact with your lighting

ThePharos VLC(Video Lighting Controller) is an extremely capable and cost effective solution for large LED pixel arrays; such as building façades, bridges, and presentation walls. It makes it simple to play video content across your array, either from locally stored HD media files or a DVI-D video input. It also offers a range of creative, generative effects and the versatility of powerful show control and integration features.Stay in control 50 to 1,500 universes. Designed to run 24/7. Dive into the details Windows and Mac compatible Designer 2 software application opens up a world of advanced programming options Get in touch Optional TPS wall-mounted touch panel makes it easy to interact with your lighting

Flex Tube SC is a flexible, direct view LED strip that features a single color output, with a wired digital communication network. It comes in a 10M spool that can be cut to length to suit project requirements or you can specify custom build to order lengths. It features a highly durable PVC body that is outdoor rated and impact resistant. You’ve got options Select from 7 different colors, 3 cable feeds, two viewing angles, and built to order lengths. It features a minimum bend radius of 4.7" (120mm)  Energy-saving and a clean appearance 3.75W power consumption per linear foot and a dotless direct view look Ready for the elements IP68* (wet location) and IK10 impact protection standard

Flex One SO Interiorprovides the best in class color rendering, fidelity, and gamut of any LED strip product with wired digital communication network. It can be cut in one inch increments to create the exact length needed for your specific application. It is available in 2400K, 2700K, 3000K, 3500K, & 4000K, and features a lumen output of up to 235 per foot, with a minimum CRI of 95. The combination of it’s high output and low profile allows for a wide variety of cove, millwork, signage, and many other interior applications. Built to perform Flex One features best in class color rendering, fidelity, and gamut for an LED strip product You’ve got options Select from multiple mounting and channel configurations Energy saving and highly efficient 5.5W power consumption per linear foot and up to 566 lumens per foot

AL Driver 1is a single channel PWM dimming driver for low voltage LED products with a wired digital communication network. It can take a DC input from 6-24VDC and control protocols are DMX or 0-10V (sink and source). It can control up to 5A of single color LED product, and a manual dimming level can be set in instances where external control is not desired.Input options Connect DMX or 0-10V to control 6-24VDC PWM products (5A maximum) Easy to configure Adjust settings and address via the onboard dip switches Low profile Ultra compact housing fits in tight spaces or can be grouped together in an enclosure

AL Driver 4is a four-channel PWM dimming driver for low voltage LED products with a wired digital communication network. It can take a DC input from 12-24VDC and dims each channel via DMX. It can control up to 5A of multi-color LED products, and manual colors can be set in instances where external control is not desired.Simple control options Connect DMX to control 12-24VDC multi-color PWM products (5A maximum), or static color via the dip switches Easy to configure Adjust settings and address via the onboard dip switches Low profile Ultra compact housing fits in tight spaces or can be grouped together in an enclosure

AL Dotis a direct view, RDM / DMX node, with a wired digital communication network. It is designed for low resolution graphic displays and individual dots of color. Available in a clear flat, diffused flat or diffused dome lens, it also features an internal DMX driver and all aluminum construction. It can be used indoor or outdoor and carries an IP66 outdoor rating.Expand your palette Spectrum Technology gives you more usable colors, including pastels, dedicated whites, and dynamic white options, all in the same system Stay in control Control of every individual AL Dot provides the flexibility to create your own dynamic effects Ready for the elements IP66 (wet location), IK08 impact protection standard

Dyna Drum EOis a high output, compact outdoor rated LED floodlight with wired digital communication network. It features an internal 100-277VAC power supply, onboard DMX+RDM driver, and each unit carries Acclaim’s Aria wireless DMX technology inside. It comes with a narrow beam standard, with optional quick-change spread lenses for wider applications. It is ideal for facade lighting applications and as an area floodlight.Expand your palette Spectrum Technology gives you more usable colors, including pastels, dedicated whites, and dynamic white options, all in the same system Over the air Every Dyna Drum features a direct connetion to Acclaim's Aria Wireless DMX system Ready for the elements IP66 (wet location), IK07 impact protection, and 3G rated for high vibration and bridge applications

Flex Spectrum Interioris an RGBW flexible LED circuit strip, in a 16.4' spool with a wired digital communication network, designed to give you a wide range of color to choose from in applications where both color and dedicated white are required. By mixing blue with 3000K inside the quad-color diode, you get a white range from 3000K-7000K, while maintaining an 80 CRI.Expand your palette Spectrum Technology gives you more usable colors, including pastels, dedicated whites, and dynamic white options, all in the same system You’ve got options Select from multiple mounting and channel configurations Energy saving and highly efficient 4.5W power consumption per linear foot and up to 226 lumens per foot

Flex Spectrum Exterioris an IP68, RGBW flexible LED circuit strip, in a 16.4' spool with wired digital communication network. It is designed to give you a wide range of color to choose from in applications where both color and dedicated white are required. By mixing blue with 3000K inside the quad-color diode, you get a white range from 3000K-7000K, while maintaining an 80 CRI.Expand your palette Spectrum Technology gives you more usable colors, including pastels, dedicated whites, and dynamic white options, all in the same system You’ve got options Select from multiple mounting and channel configurations Ready for the elements IP68* (wet location)and IK06 impact protection standard

Flex One HO Exteriorprovides the best in class color rendering, fidelity, and gamut of any LED strip product with wired digital communication network. It can be cut in one inch increments to create the exact length needed for your specific application. It is available in 2700K, 3000K, & 4000K, and features a lumen output of up to 411 per foot, with a minimum CRI of 95. The combination of it’s high output, low profile, and IP68* rating allows for a wide variety of cove, millwork, signage, and many other exterior applications.Built to perform Flex One features best in class color rendering, fidelity, and gamut for an LED strip product You’ve got options Select from multiple mounting and channel configurations Ready for the elements IP68* (wet location), IK06 impact protection, and ETL sanitation approval for food service applications standard

Flex One SO Exteriorprovides the best in class color rendering, fidelity, and gamut of any LED strip product with wired digital communication network. It can be cut in one inch increments to create the exact length needed for your specific application. It is available in 2700K, 3000K, & 4000K, and features a lumen output of up to 200 per foot, with a minimum CRI of 95. The combination of it’s high output, low profile, and IP68* rating allows for a wide variety of cove, millwork, signage, and many other exterior applications.Built to perform Flex One features best in class color rendering, fidelity, and gamut for an LED strip product You’ve got options Select from multiple mounting and channel configurations Ready for the elements IP68* (wet location), IK06 impact protection, and ETL sanitation approval for food service applications standard

Flex Tube Pixelis a flexible, direct view LED strip with a wired digital communication network, that features RGB control of every 4.9” (125mm) section. It comes in a 10M spool that can be cut to length to suit project requirements and features a highly durable PVC body which is outdoor and impact rated. Stay in control Maximum control flexibility with 5" individual pixel sections You’ve got options Unlimited colors, 3 cable feeds, two viewing angles, and built to order lengths. It features a minimum bend radius of 4.7" (120mm)  Ready for the elements IP68* (wet location) and IK10 impact protection standard

TheArt 500is a touch panel DMX Controller with 1,024 DMX channels and 500 programmable scenes, designed to be the mosteffective control solution for architectural control. Included is the ART 500 software package, which offers an easy to navigate interface, combined with powerful control features. Stay in control 1024 DMX control channels and up to 500 presets Dive into the details PC and Mac compatible software applications open up a world of advanced programming options Get in touch Wall-mounted touch panel makes it easy to interact with your lighting

TC 1 Prois a simple, touch-based wall-mount DMX controller, designed for single color lighting products. It features a DMX and 0-10V (source) outputs, four user-programmable dimming level presets, and an adjustable fade function. Get in touch A simple touch interface makes for an easy to use wall mount DMX controller Set your level Control white DMX or 0-10V source fixtures and dim from 0-100% Keep it locked Use the four preset buttons to store your favorite light levels

With Linear One, we set out to produce a series that works with your vision instead of crowding it. Acclaim Lighting continually strives for simple goals during the design process: be useful, stay out of the way, and function wonderfully. Creativity begins with great design and Linear One is streamlined to work for you. We meticulously craft linear lights that install with no visible cables and create the clutter-free space your work deserves. This means that subtlety enhances your aesthetic as Linear One remains hidden while serving as the powerhouse behind your visual creation. Refined to work with your creativity, Linear One provides end-to-end modular functionality that adapts to your needs and never works against them. Acclaim Lighting is motivated by the passion of its users and strives to produce the very best solutions in architectural lighting. We create beautiful products that work for creativity.

ILC has been designing custom switch stationsfor over 30 yearsto complement our lighting controlsystems. We can design switch plates from smallsingle gang controlstations, to large facility floor plan layouts on a slanted enclosure. The design optionsfor materials, switches,status LEDs, graphics, and mounting are virtually limitless. Switch stations can be designed with a hinged locking door that allowsforstatus viewing but limits access only to those with the key

INTELLIGENT LIGHTING CONTROLS power pack controllers transform incoming line voltage power to Class 2 low voltage as needed by sensors or other control devices. Additionally, they switch on/off power to the connected lighting load as directed by the sensors and controls. INTELLIGENT LIGHTING CONTROLS power packs utilize a powerful microprocessor to optimize its switching timing in order to ensure long relay life even when controlling high-inrush LEDs and ballast loads. As with all INTELLIGENT LIGHTING CONTROLS products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple with snaps for quick installation and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All INTELLIGENT LIGHTING CONTROLS products are proudly made in the USA.

The ILC Current Limiting Subpanel gives you the ability to limit current on lighting circuits. This gives you the ability to control the calculated load to comply with energy codes like California’s Title 24 that limit the VA (wattage). This subpanel is designed to be installed between the lighting branch circuit breaker and the lighting. These panels are custom configured with 1 to 21 breakers ranging from .5 to 16 Amps.

The LightSync Digital Power Supply Repeater 4 (LSPSR4) is a remote mounted power supply and data repeater. The PSR4 adds power for LightSync devices and refreshes both LS and LL data communications and is ideal for network distribution. The LSPSR4 has one input and two branch outputs with 2 ports for going up to 4 directions. The power supply supports an additional 20 LS devices and the repeaters refresh data for up to 31 more LL/LS device per branch.

The LightSync DIgital device hub provides device installation using a home run configuration where the data lines are pulled directly from the devices to a single location. The hub has 20 ports that supplies power for the devices along with renewed data communications. Each port can run up to 1500 feet to devices. The hub is supplied in a NEMA 1 enclosure with a multi-tap transformer and a high voltage divider.

DCS Controller. 3 x 20 A Relays. 3 x 0-10 V Dimming, Wireless BLE Mesh, Time Clock with Astronomic Funcations. STEINEL's new Digital Control Solution answers the demand for a cost-effective digital controller that maximizes energy savings while allowing occupants to control their lighting preferences. We made it functional out of the box with predefined and customer use cases. With no front end needed and packed with standard features, it is the Smarter Digital Control Solution.

DMX Controller – USB, Euroblock, 1 dry contact port, 1 Zone, 128 Channel Input Power5.5 -12V via AC/DC Adapter 5.5v max via USBOutput ProtocolDMX512ProgrammabilityWindows, Mac OS XConnectionsUSB, Euroblock, 1 dry contact portDimension (in)3.38 x 3.38 x 0.39StandardsEC, EMC, ROHS CDMX128C

DMX Controller – 1 zone, 4 Channel Input Power12-24VDCOutput ProtocolDMX512ProgrammabilityN/ADimension (in)3.38 x 3.38 x 1.15StandardsEC, EMC, ROHS, ETL CDMX4C

DMX/RF – WiFi Controller CRF-WIFI

DMX Controller – USB, Ethernet and RS232 connection, 10 Zone, 1024 Channel C94-3ZW

DMX Controller – USB, Ethernet and RS232 connection, 10 Zone, 1024 Channel Input Power6-7V DCOutput ProtocolDMX512 (x2)ProgrammabilityPC, Mac, Tablet, SmartphoneConnectionsUSB, Ethernet, RS232, Clock, 8 dry contact ports, 5v Output RelayDimension (in)4.17 x 5.75 x .39StandardsEC, EMC, ROHS, ETL C94-10ZDMX

The CASAMBI controllers will remotely control your lighting through the app - downloadable for IOS & Android.

Store up to 500 scenes across 10 separate zones with a full-color display.Details & Downloads

NEW & EXPANDED ACCESSORIESThe new TOUCHDIAL™zone control system controls single color dimming, tunable white, and color changing LED lighting via mobile device and additional TOUCHDIAL controls.Details & Downloads

Commercial-Grade 0-10V Dimmable LED Drivers are essential components commercial building applications and retrofits of low voltage LED fixtures in 0-10V control systems.Details & Downloads

This fully customized DMX color control for color-changing LED lights combines sophisticated control with ease of use.Details & Downloads

DMX wall-mounted color control systems provide professional-level control of color-changing RGB and RGBW LED lighting in one or multiple independent areas.Details & Downloads

Ideal for facilities that may not have access to the outside world via internet connection, the AirMesh Hub is a key component of the entire LED lighting system. It can switch lights off or on, or dim them to a specified level. Zones can be established so that lights in a particular area can be controlled separately from others. The system stores power data, behaviors, alarms and critical events locally for maintenance and troubleshooting.

RDM2go is a multi-functional tool for working with fixtures over a DMX/RDM data line. This palm-sized controller performs a multitude of tasks including RDM functionality, DMX snapshot and test-scene record and playback, DMX input and output monitoring. RDM2go features a built-in DMX cable integrity checker, and an easy to read OLED display. It also addresses Chauvet’s Iluminarc IP fixtures that do not have a display. The unit easily recharges via a standard micro USB jack and comes with a convenient carry pouch and DMX connector converters.