160 manufacturers · 18,987 products

Specification Grade tape light with intelligent design and high quality components. Osram LEDs, 3Oz double layer copper conductors, gold-plated solder pads and constant current ICs guarantee uniform light levels even with longer run lengths up to 55’. LM80>60,000 hours. Discharge and reverse polarization protection.

Specification grade, flexible LED sheet with minimal cutting increments

Specification grade, flexible LED sheet with minimal cutting increments

Double FlexBeam is a fantastic new solution for challenging architectural applications. It combines precise optics, power and high flexibility with capability to bend both horizontally and vertically. Various beam spreads increase the flexibility and help finding the perfect solution for various lighting challenges.

BE01 is a very common recessed extrusion as it is still quite small but can hold all lumen output tapes of the Beulux range. Made from anodized aluminum it has great heat dissipation capabilities.

BA02 is made from anodized aluminum and is large enough to incorporate the 120V Madrid tape as well as the Flexbeam but can be equipped with most Beulux’s tape lights. Its versatility allows for use as surface mount, recessed, and pendant mount.

Architectural tape light using high quality LEDs. LM80>60,000 hours. Discharge and reverse polarization protection.

AC02 is made from high quality aluminum and offers a round lens which provides a softer look and a wider distribution angle (180°), therefore also providing lateral light. Made from anodized aluminum it has great heat dissipation capabilities.

AB02 is the perfect extrusion for shelves, under cabinet, and more occasions where small and unobtrusive lighting solutions are required. The sleek design integrates discretely and still offers powerful illumination. The intelligent engineering allows for easy installation without any visible screws. Made from anodized aluminum it has great heat dissipation capabilities.

The VT03 is a medium size extrusion constructed from high quality anodized aluminum that can be suspended as contemporary pendant light, or surface mounted for a sophisticated modern light fixture. The VT03 is accessorized with low-profile mounting hardware; when paired with the VT03-SL, a satined polycarbonate diffusor, creates a cylindrical look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 37⁄64 x 25⁄64CustomizationCut to specified length VT03

The JG04 is a 90° extrusion created from high quality anodized aluminum MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 3⁄16 x 1 3⁄16CustomizationCut to specified length JG04

XT01 is a very common recessed extrusion as it is still quite small but can hold all lumen output tapes of the Beulux range. Made from anodized aluminum it has great heat dissipation capabilities. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 29⁄32 x 49⁄64CustomizationCut to specified length XT01

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.

OSLO L1000 was specifically developed to be used with extrusion JD01. The lumen output is arranged in a way that enables the use of the widths of fixtures with the exact same light density. Thus, the respective 2.2” wide diffusers will look uniform and harmonious. Using high quality components, OSLO comes with CRI>95 and maximum run lengths of 47’ due to the use of thick copper conductors and ICs along the tapes. CRI95 IP20 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>95LEDs/ft195Output (lm/ft)~ 1000Consumption (watt/ft)12.1Efficacy (lm/watt)83Beam Angle120°Voltage24V DCMax Run Length47 ftCustomization Increment1/2" Oslo Installation Guide 24V Tapelight

OSLO L450 was specifically developed to be used with extrusion JB01. The lumen output is arranged in a way that enables the use of the widths of fixtures with the exact same light density. Thus, the respective 1” wide diffusers will look uniform and harmonious. Using high quality components, OSLO comes with CRI>95 and maximum run lengths of 47’ due to the use of thick copper conductors and ICs along the tapes. CRI95 IP20 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>95LEDs/ft97Output (lm/ft)~ 450Consumption (watt/ft)5.5Efficacy (lm/watt)91Beam Angle120°Voltage24V DCMax Run Length47 ftCustomization Increment1/2" Oslo Installation Guide 24V Tapelight

The CT06 is a unique extrusion that is made from high quality anodized aluminum, it is compact giving this extrusion dual functionality as both a closet rod and lighting fixture. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 19⁄32 x 11⁄32CustomizationCut to specified length CT06

The UT01 is an inground extrusion that is made of high-quality anodized aluminum, this extrusion is very strong and durable, making it perfect for indoor residential or commercial applications. This extrusion pairs with the UT01-SL, which is a sturdy polycarbonate lens that makes it walk-over enabled and emits a smooth line of light for a polished look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 55⁄64 x 1CustomizationCut to specified length UT01

The LB03OUT is a unique extrusion with innovative design that allows to transform an outer dry wall corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length LB03OUT

The PH02 is a recessed or surface mounted walk-over fixture that consists of the outer solid aluminum and the sturdy inner, one-piece PMMA extrusion. This fixture can withstand a maximum weight of 30kN and is considered IP67. This extrusion creates uniform light lines and can be used as single fixture or combining several fixtures without shadows, to create continuous seamless light lines and makes for an excellent outdoor and indoor linear light. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 13⁄16 x 1 49⁄64CustomizationCut to specified length PH02

The VT02 is a slim extrusion constructed from high quality anodized aluminum that can be suspended as contemporary pendant light, or surface mounted for a sophisticated modern light fixture. The VT02 is accessorized with low-profile mounting hardware; when paired with the VT02-SL, a satined polycarbonate diffusor, creates a cylindrical look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 53⁄64 x 9⁄32CustomizationCut to specified length VT02

The AL02 was designed as a very versatile extrusion that is known for its capabilities to bend to fit new and creative applications. Can be used surface mount or as a pendant.

The AA07 was created with bathrooms and kitchen areas in mind; this under tile extrusion is constructed from high quality anodized aluminum and is used to create lineation between tiles or to beautifully end a line of tiles. This creates a sublime accent for counters and vanities alike and it can be mounted horizontally or vertically for added customization. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 31⁄64 x 7⁄16CustomizationCut to specified length AA07

The LB03OUT is a unique extrusion with innovative design that allows to transform an outer dry wall corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length

The JD01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 2 39⁄64 x 39⁄64CustomizationCut to specified length JD01

The JC01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 2 x 39⁄64CustomizationCut to specified length JC01

The JB01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x W 1 27⁄64 x 39⁄64CustomizationCut to specified length JB01

The JA01 is a flangeless pocket extrusion that combines a hidden light source with a smooth angle in the extrusion to exude an exquisite glow onto floors, walkways, stairs and can also be used as an uplight (to replace a cove). MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 39⁄64 x 2 13⁄64CustomizationCut to specified length JA01

The AG01 is a recessed flangeless extrusion that is constructed using anodized aluminum and it is designed to be used for wall and ceiling, with easy installation. This extrusion can have diffusors up to 19’ 6” length, creating a seamless look for longer runs.

The JF04 is a small 90° extrusion that was created from high quality anodized aluminum. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 5⁄8 x 5⁄8CustomizationCut to specified length JF04

The YT02 is a small surface mounted extrusion that is made using quality anodized aluminum. Offering great heat dissipation capabilities, the YT02 is best suited for a low-medium output tape light range. The YT line is known for its size and versatility in applications, which can help facilitate the project specification process. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 11⁄16 x 11⁄32CustomizationCut to specified length YT02

The VT02 is a slim extrusion constructed from high quality anodized aluminum that can be suspended as contemporary pendant light, or surface mounted for a sophisticated modern light fixture. The VT02 is accessorized with low-profile mounting hardware; when paired with the VT02-SL, a satined polycarbonate diffusor, creates a cylindrical look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 53⁄64 x 9⁄32CustomizationCut to specified length VT02

The AL02 was designed as a very versatile extrusion that is known for its capabilities to bend to fit new and creative applications. Can be used surface mount or as a pendant. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 45⁄64 x 5⁄32CustomizationCut to specified length AL02

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.