160 manufacturers · 18,987 products

FLATFLEX - Modern Flexibility with a finished look. MODA’s new ultra low profile flexible lighting solution is just 1/5” (6mm) thick and has all of its components cleverly hidden from view so the flex looks like a lighting fixture. Free from any form of shape memory, it easily bends along it's line of light giving the specifier a multitude of design options. Continuous runs of up to 30ft , easy field cutting at every 4”, CRI 82, 315 lm/ft delivered and a generous beam angle of 150 degrees. Dimming is easy with a MODA Dimmable Driver 0-10V dimming. Full line of accessories available, MODA XTRUSION , clips and simple leader and jumper cables. Clean lines with options of Black, White or Clear Finishes. Supplied in contractor ready 150ft (45.7m) reels. UL listed for use in USA & Canada.

EDGE is a flexible linear system with side emitting LEDs that allow the product to disperse light in the opposite direction of a typical MODA LIGHT flexible linear products. This product is commonly use for applications such as circular coves or awkward contouring lines. MODA LIGHT's flexible linear products come with a high quality copper thermal management system that runs through the FPCB for longer life and healthy ambient operating temperatures. EDGE uses the latest in high powered side emitting LEDs and is a great compliment for dry location installations.

The Via 3 Seal Perimeter creates a compact and continuously illuminated opening at the wall/ceiling intersection. The luminaire installs in grid or drywall ceilings in a choice of three arrangements: level with the ceiling plane, with a shallow 1" regress above the ceiling, and with a deep 3 ¼" regress. Via 3 Seal Perimeter is gasketed and sealed polycarbonate clear lens. Three mounting positions Lit corners available Wet Suitable (IP54)

Via Splash, with its IP66 rating, offers energy-efficient architectural lighting for demanding, wet locations (including wash down) in both exterior and interior applications. The simple housing of extruded aluminum is fully sealed and available in lengths up to 12'. suitable for temperatures from -20ºC/-4ºF to 40ºC/104º, Via Splash can be installed in pendant, surface, wall, or pendant applications. Choose from Direct, Direct/Indirect, and Asymmetric light distributions. Light output ranges from 500 to 2000 lumens per foot, with color temperatures up to 5000K and efficacies up to 116 LPW. Multiple enclosure, electrical, emergency, and control options are available.

Via Splash, with its IP66 rating, offers energy-efficient architectural lighting for demanding, wet locations (including wash down) in both exterior and interior applications. The simple housing of extruded aluminum is fully sealed and available in lengths up to 12'. suitable for temperatures from -20ºC/-4ºF to 40ºC/104º, Via Splash can be installed in pendant, surface, wall, or pendant applications. Choose from Direct, Direct/Indirect, and Asymmetric light distributions. Light output ranges from 500 to 2000 lumens per foot, with color temperatures up to 5000K and efficacies up to 116 LPW. Multiple enclosure, electrical, emergency, and control options are available.

The 6" new construction recessed shallow downlight, is designed with a two-stage system producing smooth distribution with excellent light control and low aperture brightness. The luminaires are available with die cast aluminum, spun aluminum and injection molded non conductive reflectors with light output of up to 4,000 lumen. A standard 0-10V driver dims to 1% and a multitude of optional drivers are available.

The 4" LED square new construction recessed downlight, also available as a lensed wall wash luminaire, is designed with a two-stage system producing smooth distribution with excellent light control and low aperture brightness. Adjustable collar adjusts for up to 2" thick ceilings and rotates+/- 7.5°. Available with die-cast or spun aluminum reflectors with light output of up to 7,500 lumen. A standard 0-10V driver dims to 1% and a multitude of optional drivers are available.

The 4" new construction recessed shallow downlight, is designed with a two-stage system producing smooth distribution with excellent light control and low aperture brightness. The luminaires are available with die cast aluminum, spun aluminum and injection molded non conductive reflectors with light output of up to 4,000 lumen. A standard 0-10V driver dims to 1% and a multitude of optional drivers are available.

The 4" new construction recessed shallow downlight, is designed with a two-stage system producing smooth distribution with excellent light control and low aperture brightness. The luminaires are available with painted die cast aluminum reflectors with light output of up to 4,000 lumen. A standard 0-10V driver dims to 1% and a multitude of optional drivers are available.

The Lanterra 1000 Series of Accent & Flood luminaires offer incredible versatility in a highly durable construction to fit a wide range of applications. Available in three sizes 1002 (2.5"), 1003 (3.25"), and 1004 (4.25") the light heads mount via a rear center swivel with a 180° tilt and 340° rotation range allowing you to illuminate each layer of foliage, focal points, and façades in your environment. Specify the mounting option and optics to best fit your application, and fine tune light output with up to two optical accessories at a time.

Lanterra 1002-P1 (one head) and 1002-P2 (2 head) is a small 2.5 O.D., line voltage Path light with dimmable LED. Each model attaches to an extended length-mounting stem. The side swivel mount on P1 gives 360° rotation while the center swivel mount on P2 adds to 180° tilt along with the 360° rotation. The luminaire comes with various mounting, beam optics. It also comes with various lens, louvers and colors or dichroic filters which can combine up to two at once to create multiple lighting effects. The fixture may be used indoors or outdoors and carries IP66 rating.

The Aspen 1900 bollard features a sleek, contemporary aesthetic and low glare fixed optics. Our patented LumaLevel™ leveling system provides quick installation, easy adjustment, secure mounting and protection from vibration. Aspen bollards are 3.5” in diameter with in two standard heights of 24" (610mm) and 30" (762mm).

Lanterra 1002 Sign is a small 2.5” line voltage sign lighting luminaire that attaches to a wall mounted straight arm and is available in aimable single and dual head configurations along with 90 degree elbow options to meet any desired rotation and vertical adjustment required for a project. Multiple standard stem length arms up to 36” are available. The luminaire also comes with various mounting, beam optics. Various lenses, louvers and color or dichroic filters which can combine up to two at once to create multiple lighting effects. The fixture may be used indoors or outdoors and carries IP66 rating.

Lanterra 1003 Sign is a small 2.5” line voltage sign lighting luminaire that attaches to a wall mounted straight arm and is available in aimable single and dual head configurations along with 90 degree elbow options to meet any desired rotation and vertical adjustment required for a project. Multiple standard stem length arms up to 36” are available. The luminaire also comes with various mounting, beam optics. Various lenses, louvers and color or dichroic filters which can combine up to two at once to create multiple lighting effects. The fixture may be used indoors or outdoors and carries IP66 rating.

The Lanterra 9000 Wall Cylinder Series is a premium line of architechtural wall luminaires. The three available models span three diameters, 2.5", 3.25", and 4.25" to fit the scale and light level most appropriate for a wide range of applications. Line voltage input can be managed with integral or remote drivers while always having the ability to cover a 4" junction box. After installation, the light output can be fine tuned as needed with field interchangeable optics and up to two optical accessories.

The iO CoviO Graze provides architectural wall grazing and wall washing to highlight vertical textures and surfaces or brighten spaces. The CoviO Graze offers 8 bi-directional optical distributions, 3 lumen output options up to 1500 lm/ft along with an IP66 rating and a small size that make it a versatile choice for a wide range of indoor and outdoor spaces. The standard integral 0-10V dimming from 100% to 1%, the CoviO Graze delivers a full range of output. The standard 90 CRI LED module with 1.5 step MacAdam binning and best in class color over angle delivers high quality, clean, uniform linear accent lighting for up to 300 ft from a single power drop.

The iO CoviO provides architectural cove lighting and allows for continuity of light from indoor to outdoor spaces due to its IP66 rating and small size. The CoviO delivers functional cove lighting with 3 lumen output options up to 1500 lm/ft. With standard integral 0-10V dimming from 100% to 1%, the CoviO delivers a full range of output from functional illumination to a subtle decorative glow. The standard 90 CRI LED module delivers high quality, clean, uniform cove lighting for up to 300 ft from a single power drop.

HALO LTE LED Trims are an economical version of our LT Series with the same non-conductive, dead-front baffle trim and flat, diffuse lens design. Available with dedicated 3000K CCT and flicker-free dimming to 10% in convenient bulk packs. Suitable for new construction, remodel, and retrofit installation in IC (insulation contact) or non-IC housings. These fixtures meet AIR-TITE and code compliance for additional energy savings. LTE Bulk Packs are an excellent choice when you need a low-cost alternative to HALO LT or RL Series.

FailSafe ArcMed Sealed InDepth allows for the use of the stylish InDepth luminaire in complex environments such as behavioral health, sterile environments, healthcare, food service/processing/prep, and general wet location environments. Sealed clear bottom lens provides physical protection and also provides dust and water ingress protection.

A sealed recessed Encounter luminaire is accomplished by precisely adhering a clear lens to the fixture bottom. Wet location under covered ceiling standard. Choose from a variety of clear lenses - acrylic or polycarbonate. IP66 standard, NSF listed, Class 100 rated (ENC)

6 inch LED recessed downlight designed for operating room applications. Featuring a two-stage reflector with excellent light control and low aperture brightness. Lumen packages up to 7000 lumens with color temperatures of 3000K, 3500K, 4000K, and 5000K. Available with dim-to-warm technology, the 3000K LED warms smoothly as dimmed to 1850K, creating a warm glow within the space. IP66 compliant standard, NSF and MILSTD461G available.

HDF LED high pressure hose down luminaire withstands water penetration up to 2800 PSI. Stainless steel hardware provides a watertight seal by compressing the 6 3/4"" diameter tube between two fully gasketed end plates. Water-tight connectors ensure the integrity of the seal at the power supply entry. An emergency battery pack is available. UL/cUL listed for wet locations. Ideal for food processing facilities, car & truck washes, high humidity/moisture areas, maintenance facilities, inspection stations, athletic/training facilities.

The new generation of the InDepth 2.0 family improves the popular product line designed to create architectural ceiling topography with regressed and drop lens options. InDepth 2.0 offers design flexibility and versatility by providing a large variety of lens options. The regressed lenses provide optical cut off with reduced glare.

The InDepth LED Specification series is designed to create architectural ceiling topography with regressed and drop lens options. InDepth provides design flexibility and versatility by providing seven lens options (two regressed cube, one regressed curve, three drop cube, and one drop curve). The regressed lens options provide optical cut off with reduced glare. Wireless control options are available.

The ASYX 2.0 is a complete product family of high-performance asymmetric LED lighting solutions, covering a wide range of lumen outputs needed for architectural indoor and outdoor spaces. Thanks to proprietary AccuLED optics, it offers not only the highest output LEDs, but maximum control of beam spreads. Multiple distributions and mounting options add to the versatility, making it ideal for retrofit and new construction.

The ASYX 2.0 is a complete product family of high-performance asymmetric LED lighting solutions, covering a wide range of lumen outputs needed for architectural indoor and outdoor spaces. Thanks to proprietary AccuLED optics, it offers not only the highest output LEDs, but maximum control of beam spreads. Multiple distributions and mounting options add to the versatility, making it ideal for retrofit and new construction.

The ASYX 2.0 is a complete product family of high-performance asymmetric LED lighting solutions, covering a wide range of lumen outputs needed for architectural indoor and outdoor spaces. Thanks to proprietary AccuLED optics, it offers not only the highest output LEDs, but maximum control of beam spreads. Multiple distributions, mounting options and compact size add to the versatility, making it ideal for retrofit and new construction.

The ASYX 2.0 is a complete product family of high-performance asymmetric LED lighting solutions, covering a wide range of lumen outputs needed for architectural indoor and outdoor spaces. Thanks to proprietary AccuLED optics, it offers not only the highest output LEDs, but maximum control of beam spreads. Multiple distributions and mounting options add to the versatility, making it ideal for retrofit and new construction.

Endurance™ Double Spot Energy Star LED Spot Light 3000K Warm White in Architectural Bronze

Endurance™ Single Spot Energy Star LED Spot Light 3000K Warm White in Architectural Black

Endurance™ Double Spot Energy Star LED Spot Light 3000K Warm White in Architectural Black

Horizontal Step and Wall Light with Photocell in Black Aluminum

Endurance™ LED Double Signage Light 3000K in Architectural Black

Endurance™ Single Spot Energy Star LED Spot Light 3000K Warm White in Architectural Bronze

Delivered Lumens: Up to 2095lm CBCP: Up to 1436 CCT: 3000K CRI: 85 Power: 19W, 27W Input: 120-277 VAC, 50/60Hz ELV Dimming: 100-15% 0-10V Dimming: 100-30% Rated Life: 100000 Hours Construction: Die-cast aluminum Factory sealed LED Light Engine 20° forward throw illumination Photo/motion sensor compatible (sold separately) Built-in level for easy adjustment Suitable to install in all directions Driver concealed within the fixture Can be mounted on wall vertically or upside down

Unity fundamentally rethinks what an outdoor LED floodlight can be. It uses the all-new Spectrum Five engine to give you perfect, high output / high CRI whites, dynamic white operation, and full color mixing in the same unit. It also provides a single, fully homogenized beam with no color striations or separation. Unity features Acclaim’s ColorSync Digital Color Calibration technology and Aria Wireless control built into every unit.

Tiltable windowsill light with 4.5W LED and elliptical beam angle. Suitable for exterior applications in building façades and to highlight architectural details.

Bollard light with 8W LED. Adjustable medium-sized spotlight head.

Bollard light with 1W or 2W LED. Adjustable small-sized spotlight head.

Compact bollard light with 4W LED. Minimal design to blend in while providing outdoor illumination.

Bollard light with 3W or 6W LED. Modern wood finishes, sleek aluminium hardware finishes.

Bollard with 8W LED.

Bollard light with 8W LED. Modern wood finishes, sleek aluminium hardware finishes. Even light distribution around post.

Bollard light with 8W LED. Modern wood finishes, sleek aluminium hardware finishes. Even light distribution around post, perfect for landscaping purposes.

Slim bollard with 4W LED. Durable material & finish. Ideal for landscaping applications, including pathways, driveways & walkways. Different mounting options for multiple surfaces.

Larger version of L930. Adjustable & rotatable spotlight with 8W LED. Shrouds available for glare control. Highly customizable. Can be mounted on ceilings and walls using canopy, or on ground using pipe stake.

Compact surface mount downlight with 2W LED and optional cover for glare control. Sleek design with outdoor-rated material. Suitable for under bench or stair tread illumination.

Surface mount spotlight with 1W or 2W LED. Options for single or double spotlights. Suitable for exterior applications to highlight architectural details and landscaping features.

In-ground luminaire with 8W LED. Easy installation in concrete pour and paving stones. Features baffle for glare control. Optional anti-slip lens safe for public and high-traffic commercial projects.

Adjustable & rotatable spotlight with 1W or 2W LED. Shrouds available for glare control. Highly customizable. Can be mounted on ceilings and walls using canopy, or on ground using pipe stake.

Wall-mount sconce with 2W LED. Flexible installation for up or down illumination. Ideal for landscape lighting to light up walls, columns & paths. Durable in outdoor environments.

Trimless in-ground light with 3x1W or 3×2.5W. Outdoor-rated materials and finishes. Sturdy housing for easy installation on various surfaces, including concrete pour and paving stones. Powerful light for commercial, hospitality & industrial projects.

Vertical wall-mount steplight with 3W or 6W LED to illuminate signs, unit numbers and steps. Engravable. Outdoor-rated finish suitable for exterior applications on walls, stairs and walkways.

Horizontal steplight with 3W or 6W LED. Reliable lighting for steps, stairs & walkways. Easy to install with mounting kit. Engraving option suitable for lighting up unit numbers.

Horizontal wall-mount steplight with 3W or 6W LED. Secured with bolts, ideal for public & commercial projects. Suitable for stairs, walls & walkways.

Round wall-mount light with 1W or 2W LED and back plate for halo effect. Frosted lens for diffused light. RGB-A LED available for dynamic settings. Ideal for walls, stairs, steps & walkways.

Wall-mount sconce with 8W LED & short housing. Can be installed with light source up or down. Sleek design and high-quality materials & finishes.