160 manufacturers · 18,987 products

EDGE is a flexible linear system with side emitting LEDs that allow the product to disperse light in the opposite direction of a typical MODA LIGHT flexible linear products. This product is commonly use for applications such as circular coves or awkward contouring lines. MODA LIGHT's flexible linear products come with a high quality copper thermal management system that runs through the FPCB for longer life and healthy ambient operating temperatures. EDGE uses the latest in high powered side emitting LEDs and is a great compliment for dry location installations.

The Via 3 Seal Perimeter creates a compact and continuously illuminated opening at the wall/ceiling intersection. The luminaire installs in grid or drywall ceilings in a choice of three arrangements: level with the ceiling plane, with a shallow 1" regress above the ceiling, and with a deep 3 ¼" regress. Via 3 Seal Perimeter is gasketed and sealed polycarbonate clear lens. Three mounting positions Lit corners available Wet Suitable (IP54)

Via Splash, with its IP66 rating, offers energy-efficient architectural lighting for demanding, wet locations (including wash down) in both exterior and interior applications. The simple housing of extruded aluminum is fully sealed and available in lengths up to 12'. suitable for temperatures from -20ºC/-4ºF to 40ºC/104º, Via Splash can be installed in pendant, surface, wall, or pendant applications. Choose from Direct, Direct/Indirect, and Asymmetric light distributions. Light output ranges from 500 to 2000 lumens per foot, with color temperatures up to 5000K and efficacies up to 116 LPW. Multiple enclosure, electrical, emergency, and control options are available.

Via Splash, with its IP66 rating, offers energy-efficient architectural lighting for demanding, wet locations (including wash down) in both exterior and interior applications. The simple housing of extruded aluminum is fully sealed and available in lengths up to 12'. suitable for temperatures from -20ºC/-4ºF to 40ºC/104º, Via Splash can be installed in pendant, surface, wall, or pendant applications. Choose from Direct, Direct/Indirect, and Asymmetric light distributions. Light output ranges from 500 to 2000 lumens per foot, with color temperatures up to 5000K and efficacies up to 116 LPW. Multiple enclosure, electrical, emergency, and control options are available.

The 6" new construction recessed shallow downlight, is designed with a two-stage system producing smooth distribution with excellent light control and low aperture brightness. The luminaires are available with die cast aluminum, spun aluminum and injection molded non conductive reflectors with light output of up to 4,000 lumen. A standard 0-10V driver dims to 1% and a multitude of optional drivers are available.

The 4" LED square new construction recessed downlight, also available as a lensed wall wash luminaire, is designed with a two-stage system producing smooth distribution with excellent light control and low aperture brightness. Adjustable collar adjusts for up to 2" thick ceilings and rotates+/- 7.5°. Available with die-cast or spun aluminum reflectors with light output of up to 7,500 lumen. A standard 0-10V driver dims to 1% and a multitude of optional drivers are available.

The 4" new construction recessed shallow downlight, is designed with a two-stage system producing smooth distribution with excellent light control and low aperture brightness. The luminaires are available with die cast aluminum, spun aluminum and injection molded non conductive reflectors with light output of up to 4,000 lumen. A standard 0-10V driver dims to 1% and a multitude of optional drivers are available.

The 4" new construction recessed shallow downlight, is designed with a two-stage system producing smooth distribution with excellent light control and low aperture brightness. The luminaires are available with painted die cast aluminum reflectors with light output of up to 4,000 lumen. A standard 0-10V driver dims to 1% and a multitude of optional drivers are available.

Benchmark LED is designed for a wide variety of industrial applications where higher ambient performance is required for complex environments. Its heavy-duty diecast aluminum body provides durability, optimal thermal control, and longer system life. Its advanced optical systems delivers premium efficacy and multiple distributions. The Benchmark is an ideal high bay fixture for use in industrial, manufacturing, cold storage, large indoor, sports/recreation, and retail applications.

The GWS Galleon Wall Slim features a thin profile available in three housing sizes, offering an impressive range of lumen outputs and optical distributions. With appropriate mounting heights ranging from 8' up to 40', the GWS offers several controls options for standalone or networked configurations.

The Lanterra 1000 Series of Accent & Flood luminaires offer incredible versatility in a highly durable construction to fit a wide range of applications. Available in three sizes 1002 (2.5"), 1003 (3.25"), and 1004 (4.25") the light heads mount via a rear center swivel with a 180° tilt and 340° rotation range allowing you to illuminate each layer of foliage, focal points, and façades in your environment. Specify the mounting option and optics to best fit your application, and fine tune light output with up to two optical accessories at a time.

The Lumière Eon 303 Sign and Ceiling luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is made from machined aluminum, and paired with a recessed junction box is an IP66 rated fixture that will look and perform great for years. The EON 303 Sign and Ceiling luminaires are ideal for wall mounted signaged, surface or ceiling, façade/canopy illumination, and perimeter/pathway illumination.

The Lumière Eon 303 wall mount luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is made from machined aluminum, and paired with a recessed junction box is an IP66 rated fixture that will look and perform great for years. The EON 303 Wall ideal for surface or ceiling, standard or inverted mount for façade/canopy illumination, and perimeter/pathway illumination.

The Lumière Eon 303 Accent luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is made from machined aluminum, contains a sealed optical compartment and mounts to an integral recess junction box creating an IP66 rated fixture that will look and perform great for years. The Eon Accent luminaire is ideal for floodlight illumination of low level signage, building façades, or for ground mount applications where greater lateral or forward throw illumination is needed.

The Lanterra 9000 Wall Cylinder Series is a premium line of architechtural wall luminaires. The three available models span three diameters, 2.5", 3.25", and 4.25" to fit the scale and light level most appropriate for a wide range of applications. Line voltage input can be managed with integral or remote drivers while always having the ability to cover a 4" junction box. After installation, the light output can be fine tuned as needed with field interchangeable optics and up to two optical accessories.

The iO CoviO Graze provides architectural wall grazing and wall washing to highlight vertical textures and surfaces or brighten spaces. The CoviO Graze offers 8 bi-directional optical distributions, 3 lumen output options up to 1500 lm/ft along with an IP66 rating and a small size that make it a versatile choice for a wide range of indoor and outdoor spaces. The standard integral 0-10V dimming from 100% to 1%, the CoviO Graze delivers a full range of output. The standard 90 CRI LED module with 1.5 step MacAdam binning and best in class color over angle delivers high quality, clean, uniform linear accent lighting for up to 300 ft from a single power drop.

The iO CoviO provides architectural cove lighting and allows for continuity of light from indoor to outdoor spaces due to its IP66 rating and small size. The CoviO delivers functional cove lighting with 3 lumen output options up to 1500 lm/ft. With standard integral 0-10V dimming from 100% to 1%, the CoviO delivers a full range of output from functional illumination to a subtle decorative glow. The standard 90 CRI LED module delivers high quality, clean, uniform cove lighting for up to 300 ft from a single power drop.

6 inch LED recessed downlight designed for operating room applications. Featuring a two-stage reflector with excellent light control and low aperture brightness. Lumen packages up to 7000 lumens with color temperatures of 3000K, 3500K, 4000K, and 5000K. Available with dim-to-warm technology, the 3000K LED warms smoothly as dimmed to 1850K, creating a warm glow within the space. IP66 compliant standard, NSF and MILSTD461G available.

The ASYX 2.0 is a complete product family of high-performance asymmetric LED lighting solutions, covering a wide range of lumen outputs needed for architectural indoor and outdoor spaces. Thanks to proprietary AccuLED optics, it offers not only the highest output LEDs, but maximum control of beam spreads. Multiple distributions and mounting options add to the versatility, making it ideal for retrofit and new construction.

The ASYX 2.0 is a complete product family of high-performance asymmetric LED lighting solutions, covering a wide range of lumen outputs needed for architectural indoor and outdoor spaces. Thanks to proprietary AccuLED optics, it offers not only the highest output LEDs, but maximum control of beam spreads. Multiple distributions and mounting options add to the versatility, making it ideal for retrofit and new construction.

The ASYX 2.0 is a complete product family of high-performance asymmetric LED lighting solutions, covering a wide range of lumen outputs needed for architectural indoor and outdoor spaces. Thanks to proprietary AccuLED optics, it offers not only the highest output LEDs, but maximum control of beam spreads. Multiple distributions, mounting options and compact size add to the versatility, making it ideal for retrofit and new construction.

The ASYX 2.0 is a complete product family of high-performance asymmetric LED lighting solutions, covering a wide range of lumen outputs needed for architectural indoor and outdoor spaces. Thanks to proprietary AccuLED optics, it offers not only the highest output LEDs, but maximum control of beam spreads. Multiple distributions and mounting options add to the versatility, making it ideal for retrofit and new construction.

The 1059 COB LED Floodlight, offering 2400-10700 lumens, is designed with spun reflector optics in a durable die-cast aluminum body. It supports 0-10V and Phase Cut dimming and is suitable for both indoor and outdoor mounting. Features an adjustable aluminum yoke strap and available in 18 standard colors.

The 1057 COB LED Floodlight, with 1600-5800 lumens output, features spun reflector optics in a robust die-cast aluminum body. It supports 0-10V and Phase Cut dimming and is versatile for indoor/outdoor mounting. Comes in 18 standard colors, with an adjustable aluminum yoke strap for precise aiming.

The 1501-GB Step & Marker features a Glass Border cover plate and a fiber-reinforced polymer housing with three high-output LEDs. Offering over 200 lumens in color temperatures from 2700°K to 4000°K and Amber 595nm, it includes modular optics with 30° adjustment and sharp cutoff. Suitable for both non-IC and IC installations, with options for Quick Ship back boxes and Flush Tray mounting.

The 1503-GB Step & Marker features a Glass Border cover plate and a fiber-reinforced polymer housing with six high-output LEDs. Offering over 470 lumens in color temperatures from 2700°K to 4000°K and Amber 595nm, it includes modular optics with 30° adjustment and sharp cutoff. Suitable for both non-IC and IC installations, with options for Quick Ship back boxes and Flush Tray mounting.

The 1505-GB Step & Marker features a Glass Border cover plate and a fiber-reinforced polymer housing with nine high-output LEDs. Offering 740 lumens in color temperatures from 2700°K to 4000°K and Amber 595nm, it includes modular optics with 30° adjustment and sharp cutoff. Suitable for both non-IC and IC installations, with options for Quick Ship back boxes and Flush Tray mounting.

The 1504-GB Vertical Step & Marker features a Glass Border cover plate and a fiber-reinforced polymer housing with six high-output LEDs. Offering over 500 lumens in color temperatures from 2700°K to 4000°K and Amber 595nm, it includes no-glare optics with sharp cutoff. Suitable for both non-IC and IC installations, with options for Quick Ship back boxes and Flush Tray mounting.

The 1502-GB Vertical Step & Marker features a Glass Border cover plate and a fiber-reinforced polymer housing with three high-output LEDs. Offering over 270 lumens in color temperatures from 2700°K to 4000°K and Amber 595nm, it includes no-glare optics with sharp cutoff. Suitable for both non-IC and IC installations, with options for Quick Ship back boxes and Flush Tray mounting.

Extended Arm Mount (EAM) extends two 1051 Linear Floodlights off a surface for a variety of lighting applications.

Extended Arm Mount (EAM) extends two 1050 Linear Floodlights off a surface for a variety of lighting applications.

Stanchion Mount (STM) extends two 1045Y Floodlights off a surface for a variety of lighting applications.

Stanchion Mount (STM) extends two 1045 Floodlights off a surface for a variety of lighting applications.

Extended Arm Mount (EAM) extends two 1045 Floodlights off a surface for a variety of lighting applications.

Stanchion Mount (STM) extends two 1043Y Floodlights off a surface for a variety of lighting applications.

Stanchion Mount (STM) extends two 1043 Floodlights off a surface for a variety of lighting applications.

Extended Arm Mount (EAM) extends two 1043 Floodlights off a surface for a variety of lighting applications.

The 1504-B Vertical Step & Marker, featuring a versatile Border cover plate in Aluminum, Brass, or Stainless Steel, incorporates a fiber-reinforced polymer housing and six high-output LEDs. Offering over 500 lumens in color temperatures from 2700°K to 4000°K and Amber 595nm, it includes no-glare optics with sharp cutoff. Suitable for both non-IC and IC installations, with options for Quick Ship back boxes and Flush Tray mounting.

The 1503-L Step & Marker, featuring a distinctive Louver cover plate in Aluminum, Brass, or Stainless Steel, incorporates a fiber-reinforced polymer housing and six high-output LEDs. Offering over 230 lumens in color temperatures from 2700°K to 4000°K and Amber 595nm, it includes modular optics with 30° adjustment and sharp cutoff. Suitable for both non-IC and IC installations, with options for Quick Ship back boxes and Flush Tray mounting.

The 1503-B Step & Marker, featuring a versatile Border cover plate in Aluminum, Brass, or Stainless Steel, incorporates a fiber-reinforced polymer housing and six high-output LEDs. Offering over 470 lumens in color temperatures from 2700°K to 4000°K and Amber 595nm, it includes modular optics with 30° adjustment and sharp cutoff. Suitable for both non-IC and IC installations, with options for Quick Ship back boxes and Flush Tray mounting.

The 1502-GR Vertical Step & Marker, featuring a Gradient cover plate in Brass or Stainless Steel, incorporates a fiber-reinforced polymer housing and three high-output LEDs. Offering over 270 lumens in color temperatures from 2700°K to 4000°K and Amber 595nm, it includes no-glare optics with sharp cutoff. Suitable for both non-IC and IC installations, with options for Quick Ship back boxes and Flush Tray mounting.