160 manufacturers · 18,987 products

Model#: UFUN-500XX A high powered compact surface mounted LED underwater projector for lighting small ponds, waterfalls and water jets. The floodlight must be submerged when operating. Stainless steel grade 316 body, stainless steel screws. Cable entry PG.11 cable gland supplied with 7ft of outdoor submersible #18/3 SOOW 600v power cable. Durable high temperature memory retentive silicon gasket and clear tempered vandal resistant glass. Remote 24v constant voltage driver required to be installed by others. Driver output voltage to be determined depending on quantity of luminaires connected in parallel. Color temperature 2700K, 3000K, 3500K and 4000K, LED CRI >80 and life time 50,000 Hours. A variety of beam spreads are available to suit the application requirements. This luminaire is constant voltage and needs connecting in parallel. This product is not available in Canada

Model#: UTA-80XXX, UTA-804XX, UTA-800XX, UTA-801XX Suitable for wet locations A range of cylindrical surface mounted exterior downlight luminaires. The luminaires are suitable for indoor and outdoor applications for use in residential, shopping and public areas as surface ceiling downlights. The luminaires have features such as long life, limited maintenance and constant lifetime performance. The luminaire is rated as class I with the high power LED integral driver. Low copper content die-cast aluminium housing with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Stainless steel screws. Power is provided to the luminaire through water tight single cable gland. Durable silicone rubber gasket and clear toughened glass.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: UTA-31XXX  Suitable for wet locations Wall luminaires with a selection of beam distributions for various downward lighting requirements. Designed to illuminate the wall surface and for light accents on vertical surfaces. They are suitable for many applications such as residential and pedestrian areas, shopping malls, parks and gardens, as well as commercial, historic or modern architectural interiors and exteriors. The luminaires have features such as long life, limited maintenance and constant lifetime performance. The cool lens is perfect for public and pedestrian areas. The luminaires use a high quality LED source with low energy consumption. The Luminaire is rated as class I with the LED integral driver. Low copper content die-cast aluminum housing and frame. Stainless steel screws. Durable silicone rubber gasket and clear toughened glass. Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. To maintain the integrity of the IP rating of this luminaire it is supplied with a specially designed SHG self sealing wiring grommet that is used when connecting to the power supply. This grommet insures that water and dust does not enter the luminaire through the knockout hole in the back of the luminaire.

Model#: ULZ-108XX Suitable for wet locations The innovative reflector technology of the Lightzone bollard guarantees a high degree of efficiency and optimal visual comfort while fulfilling the dark sky criteria. Lightzone has been developed to have excellent controlled downward light eliminating any glare. The Lightzone is available column in a straight or conical shape design with two different heights. Designed for lighting of entrances and residential areas by providing wide spread illumination on driveways, pathways and squares. The LED luminaires have features such as long life, limited maintenance and constant lifetime performance. Dark sky compliant Extruded aluminum body and low copper content die-cast aluminum housing. Stainless steel screws. Durable silicone rubber gasket and clear impact resistant UV stabilized polycarbonate lens. For HID lamp and toughened glass for LED lamp Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Integral ballast and anodized high purity aluminum reflector.

Model#: UAA-20XXX Suitable for wet locations A post top luminaire with a medium size shade decorative lantern and symmetrical light distribution and shepherds crook arm using energy saving compact fluorescent lamps as well as metal halide and high pressure sodium lamps. Developed to compliment the Atlantic sheppard's crook wall light, Atlantic bollard and Atlantic pillar light. Designed for lighting car parks, footpaths, pedestrian areas, precincts, parks, gardens and building perimeters. The LED luminaires have features such as long life, limited maintenance and constant lifetime performance. Low copper content die-cast aluminium housing with high corrosion resistance. Stainless steel screws. Durable silicone rubber gasket and opal glass diffuser. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Integral control gear.

Model#: UGI-31XXX A range of small, square and rectangular wall mounted luminaires with options of upward or downward light distributions. Ideally suited to illuminate the wall and surfaces in front of wall and for light accents on vertical surfaces using high efficiency LED's. The Gino is suitable for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive wall mounted luminaires. This luminaire is available in 2 different sizes and in combinations of down, up or up/down light distributions. The Gino 1 and Gino 2 have a decorative spike option for added lighting effects. The Gino 1 and 2 mounts over a 3" octagonal junction box, a 4" j-box cover plate is available upon request. Frosted or clear lenses are available.

Model#: UEC-40XXX A range of square wall recessed luminaires, with a glare free cut-off reflector system. Suitable for indoor and outdoor applications for pathways and ramps. The linear spread lens provides a wide beam spread taht evenly illuminates up to 26ft of pathway. This luminaire is provided with a powdercoated high pressure die-cast aluminum back box and can be pre shipped to the jobsite for concrete pour or masonry applications. The ECO range has a matching bollard offering to complement the recessed product. Complies with ADA requirements.

Model#: UVI-40XXX A range of round and square wall recessed luminaires. Suitable for indoor or outdoor applications for use in residential, pedestrian areas, and shopping malls, as a decorative wall guide light. The luminaires are provided with an integral 120-277v driver. Remote drivers can be provided. The standard luminaire configuration is non dimmable, however dimming can be provided by utilizing a remote mounted driver. Please contact the factory for more information. Galvanized concrete recessing box included. This fixture is suitable for concrete pour applications.

Model#: UJE-80XXX, UJE-800XX, UJE-801XX Suitable for wet locations A range of cylindrical and square shape surface mounted exterior downlight luminaires. The luminaires are suitable for indoor and outdoor applications for use in residential, shopping and public areas as surface ceiling downlights. The luminaires have features such as long life, limited maintenance and constant lifetime performance. The luminaire is rated as class I with the high power LED integral driver. Low copper content die-cast aluminium housing with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Stainless steel screws. Power is provided to the luminaire through water tight single cable gland. Durable silicone rubber gasket and clear toughened glass.

Model#: ULW-108XX The innovative reflector technology of the Lightwave bollard guarantees a high degree of efficiency and optimal visual comfort. Lightwave has been developed to have excellent controlled downward light providing wide spacing ratios. The Lightwave is available in a straight or tapered shape design with two different heights. The Lightwave bollard comes standard with a unique waterproof internal driver housing compartment that is situated at the top of the pole to stop water and dust from entering the electrical components. This fixture is supplied completely wired with powercord and waterproof gland from the driver enclosure to the base of the bollard ensuring quick trouble-free installation. Custom bollard heights are available, please specify. Color temperature 2700, 3000 and 4000 Kelvin. Custom wattages can be provided to suit customer and Title 24 requirements.  Security Bollard The Lightwave 2 bollard is available as a traffic rated security bollard. This optional design includes a 1/4" thick wall galvanized steel security pole with 2 solid 1" galvanized steel cross support rods that are embedded into concrete. This security bollard provides restraint of vehicular traffic in unauthorized areas. Impact studies show that this bollard will stop a 5,500lb vehicle that is travelling at 30mph. For added strength, the galvanized pole can be filled with concrete up to the waterproof driver housing to provide a solid concrete barrier.

Model#: ULI-212XX The Light Linear PT range of contemporary outdoor lighting fixtures utilizes an industry leading LED light module to provide high performance with multiple low glare lighting distributions for all design requirements. This product is designed not only to be aestetically pleasing, but to also be an economic alternative to conventional HPS or Metal Halide sources. Industry leading optical technology ensures that only the targeted areas are illuminated, reducing unwanted light trespass and uplight. The Light Linear PT family complies with Dark Sky requirements.  Additionally, the Light Linear PT ffering is available in post top, bollard and wall mount versions that provides designers with four matching families of products to ensure design uniformity throughout the project. The Light Linear series is designed with a rectangular, minimalistic look that is sleek and modern. High corrosion resistant poles are coated with a UV stabilized polyester powder coat that is applied after undergoing a two-stage zinc & nickel phosphate coating process. A durable injected molded silicone gasket, clear tempered vandal resistant glass lens with decorative trim and 316 stainless steel hardware is used to ensure ruggedness while maintaining a modern classic outlook without compromising performance and reliability.

Model#: UOD-50XXX The Odessa family of floodlights have a modern aesthetic design and are a perfect lighting solution for most small to medium size spotlights and floodlight requirements. The floodlights can be aimed and locked in place to highlight specific features or elements in the environment, as well as provide secuirty when illuminating dark areas on campuses and parks. This small and medium range of high performance LED floodlight luminaires provides a robust design for demanding applications such as recreational areas, public spaces and architectural structures. The luminaire has integrated heat sinks to facilitate LED cooling, as well as an integral driver. The Odessa is available in narrow, medium, wide and very wide light distributions. Color temperatures include 2700, 3000 and 4000 Kelvin. Luminaire has optional accessories, such as ground spike, visors, louvres, and linear spread lenses. For non standar fixture variations, as well as specific reflector requirements and dichroic filters, please contact the factory.?The Odessa floodight is also available as an event pole, see the Odessa Cluster, as well as in a surface mount cluster configuration, see the Odessa Surface Cluster.

Model#: ULI-30001X Light Linear PT wall light is an elegant wall mount fixture suitable for both modern and classic architecture. Ideal for creating visual guidance, with exceptional visual comfort. The dual sealed optical chamber with integrated heat sinks houses a range of field interchangeable optically controlled LED's, providing Type II, III, IV & V distribution, as well as variations of this for precise light distribution requirements. An example of this, is using a combination of Type II and Type IV distribution optics inside the same fixture. This fixture is uinique as it has a IP68 driver housing container that is housed within the IP65 rated light fixture. It is available in 28w and 55w options. This luminaire complies to Dark Sky requirements. This product range is complemented with high performance optics in the bollard and streetlight luminaires, to provide a consistent range of design aesthetics for any project.

Model#: USA-3XXXX   A range of small and large circular wall mounted bulkheads with a vandal resistant UV stabilized polycarbonate diffuser. Ideal for numerous indoor or outdoor applications. Sandy has a subtle chamfered frame and it can be given a more striking appearance by way of different grill and visor options. As with all wall mounted luminaires, these fixtures are provided with a special self-healing waterproof cable gland that prevents water entering the fixture after wiring. This fixture can be provided with an integral self diagnosing emergency battery pack.

Model#: UFOR-200XX A decorative range of post top luminaires, designed to complement the Forrey pendant, bollard and wall mount with options of having no lens or a high impact UV stabilized opal lens. This decorative lantern provides a symmetrical light distribution using high output COB LED. Color temperature 2700K, 3000K, 3500K and 4000K, LED CRI >80 and life time 50,000 Hours. High pressure die-cast marine grade LM6 aluminum body that is pre-treated with a nickel and zinc phosphate and then powder coated with a 4.9mil thick paint finish ensuring high corrosion resistance. Marine grade 316 stainless steel fasteners. Durable memory retentive silicone rubber gasket and clear high impact naturally UV stabilized acrylic lens. Anodized high purity aluminum reflector. This luminaire is provided prewired with power cord to the handhole to simplify installation.

Model#: UFOR-300XX A decorative range of wall mount luminaires designed to complement the Forrey pendant, bollard and post top with options of having no lens or a high impact UV stabilized opal lens. This decorative lantern provides a symmetrical light distribution using high output COB LED. Designed for lighting entrances, retail outlets, malls and showrooms. Color temperature 2700K, 3000K, 3500K and 4000K, LED CRI >80 and life time 50,000 Hours. High pressure die-cast marine grade LM6 aluminum body that is pre-treated with a nickel and zinc phosphate and then powder coated with a 4.9mil thick paint finish ensuring high corrosion resistance. Marine grade 316 stainless steel fasteners.

Model#: UTA-31XXX Wall luminaires with a selection of light distributions and LED wattages with upward & downward light distributions. The Tango is unique as it is available with Type II, III & IV light distribution options that facilitates wider spacing and even light distribution between the light fixtures. Spacings of up to 40' on center, and a 14' mounting height with a 2fc average can be achieved using the Type II optic. This provides higher energy saving and reduced installation costs. The Tango 31 cylindrical, or Tango 32 square up/down versions can be manufactured using different type beam distributions for the up and down optics. Integral electronic control gear.  Mounting plate for 3" and 4" junciton box is provided with the fixture. Matching surface mount conduit boxes are available as an option. Custom round pole adapters can be manufactured to suit specific pole diameters for column mounting applications. Please contact factory for more information. For type V distributions, please see the line of Jet surface wall luminaires.

Model#: USE-900XX  A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: ULW-30001 A decorative LED wall washer with circular light emission on the surrounding surface to enhance wall material detail and providing the luminaire with distinct character. This luminaire complements the Lightwave bollard range, and has a hidden LED optical chamber that reduces glare. This decorative sconce is designed with an integral waterproof driver chamber. This luminaire is provided with a standard mounting box that allows it to be secured to a 3" or 4" junction box, as well as mounting onto the building structure.

Model#: UKI-60XXX A top range of small shallow inground uplights with a round or square profile available with an extended or flush mounted frame. The fixture is manufactured with a marine grade 316 stainless steel front ring and is designed for use in shopping and pedestrian areas for illuminating building facades, columns, squares, parks, gardens, sculptures, flag poles and trees. The adjustable high powered LEDs in conjunction with high efficiencty optics provides focused beam distributions to suit most design applications. The tapered high density polyethylene inground recessing box is provided with securing lugs on each side to allow the installer properly secure the box in place thereby stopping it from moving during the concrete pour procedure. Theses securing lugs can also be used to secure the base to wood support beams and working in conjunction with the tapered recessing box will prevent the fixture from lifting when installed in dirt. The housing also has two shoulders to prevent fixture rotation when used in drive-over applications. The Kios is available with a non-slip ADA glass. This glass is infused with a specialized non-slip finish across the entire surface of the lens making this non-slip option the best in the industry. To ensure efficient drainage, gravel must be used to a depth of 17" and a width of 12" beneath the housing, and should also be placed around the luminaire. An animated video can be viewed on the Ligman website to show proper Kios installation procedure to assist contractors and ensure a problem-free installation. Power is provided to the integral control gear through a specially developed anti-wicking PG13.5 watertight cable gland and 2ft of outdoor submersible #18/. SOOW 600v power cable. Clear or frosted tempered 0.6" thick glass. 2.5 ton maximum load is transferred by the housing to the foundation. Vehicles with pneumatic tires can drive over the luminaire,

Model#: UAB-300XX A range of shallow ADA compliant square, rectangular and circular wall mounted luminaires providing downward Dark Sky compliant light distributions. Ideally suited to illuminate the wall and surfaces in front of the wall, as well as light accents on vertical surfaces using high efficiency LEDs. The Abacus is suitable for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive wall mounted luminaires. This surface mounted luminaire is available in 3 different shapes, as well as bollard combinations. The surface mounted Abacus is manufactured to cover a 3" or 4" junction box and is provided with the necessary fixing plates to simplify installation. This product is provided with integral driver and special gasketing to ensure no water enters the luminaire.

Model#: UNI-805XX, UNI-80XXX Suitable for wet locations A compact recessed exterior downlight with a round or square front frame design. Options of stainless steel or powder coated aluminum front frame. The luminaires are designed for use in interior and exterior applications. This fixture is totally waterproof. This means that the fixture can be exposed to the elements from above as well as below. This luminaire is manufactured with integrated heat sinks that provides exceptional cooling and heat dissipation ensuring long LED life. This fixture can also be provided with a concrete pour box for casting into concrete slabs, please see opions below. Power is provided to the luminaire through a single PG9 watertight cable gland and 4ft of Outdoor Submersible #18/3 SOOW 600V power cable. Remote mounted transformer. Includes A80191 driver enclosure box.

Model#: UKI-60XXX A top range of small shallow inground uplights with a round or square profile available with an extended or flush mounted frame. The fixture is manufactured with a marine grade 316 stainless steel front ring and is designed for use in shopping and pedestrian areas for illuminating building facades, columns, squares, parks, gardens, sculptures, flag poles and trees. The adjustable high powered LEDs in conjunction with high efficiencty optics provides focused beam distributions to suit most design applications. The tapered high density polyethylene inground recessing box is provided with securing lugs on each side to allow the installer properly secure the box in place thereby stopping it from moving during the concrete pour procedure. Theses securing lugs can also be used to secure the base to wood support beams and working in conjunction with the tapered recessing box will prevent the fixture from lifting when installed in dirt. The housing also has two shoulders to prevent fixture rotation when used in drive-over applications. The Kios is available with a non-slip ADA glass. This glass is infused with a specialized non-slip finish across the entire surface of the lens making this non-slip option the best in the industry. To ensure efficient drainage, gravel must be used to a depth of 17" and a width of 12" beneath the housing, and should also be placed around the luminaire. An animated video can be viewed on the Ligman website to show proper Kios installation procedure to assist contractors and ensure a problem-free installation. Power is provided to the integral control gear through a specially developed anti-wicking PG13.5 watertight cable gland and 2ft of outdoor submersible #18/. SOOW 600v power cable. Clear or frosted tempered 0.6" thick glass. 2.5 ton maximum load is transferred by the housing to the foundation. Vehicles with pneumatic tires can drive over the luminaire, but

Model#: UVA-10001 A stylish dark sky compliant square high performance bollard with downward light distribution using LED lamps. This bollard offers optimal visual comfort through glare control by utilizing controlled optics designed by Ligman. These bollards have a square design providing a unique wide light distribution offering an architecturally appealing clover leaf pattern on the paving. The internal sides of the supporting pillars are accented by light from the LED. Color temperature 2700, 3000 and 4000 Kelvin. The minimalistic shape provides distinctive lighting effects by night and decorative urban effects during the day. Suitable for pedestrian areas, precincts, building surrounds, shopping centers, squares and parks. The Vancouver bollard comes standard with a unique waterproof internal driver housing compartment that is situated at the top of the pole to stop water and dust from entering the electrical components. This fixture is supplied completely wired with powercord and waterproof gland from teh driver enclosure to the base of the bollard to ensure quick, trouble-free installation.  The Vancouver has a specially designed anchor bolt mounting base that is partially buried below ground level to provide a flush fixture finish with the surface, but maintains the rigidity that is required when installing bollards. Custom bollard heights are available along with reduced custom wattages to suit customer requirements.

Model#: UFRE-100XX Freetown bollard: Versatile range of modern urban lighting furniture for pathway and building accent lighting

Model Number: UABA-200XX-SO-X0 Ratings: IP65 IK08 A modern post top luminaire with excellent downward symmetrical light distribution and visual appeal. The precision optical system gives very low glare rating, while reducing light pollution. Designed for lighting entrances, footpaths and car parks. Color temperature 2700K, 3000K, 3500K and 4000K, LED CRI >80 and life time 50,000 Hours. Low copper content die-cast aluminum housing with high corrosion resistance. Grade 316 stainless steel fasteners. Durable silicone memory retentive gasket and clear prismatic UV stabilized acrylic lens. Housing is treated with a nickel and zinc phosphate protection before powder coating, ensuring high corrosion resistance. White coating aluminum reflector on the top of luminaire.

Model Number: UAUG-100XX Ratings: IP65 IK07 Modern, contemporary solar bollard luminaires providing a minimalistic and urban appeal. The Augusta provides a clean and visually appealing integrated PV solution. All Ligman fixtures can be manufactured using a special pre-treatment and coating process that ensures the fixture can be installed in natatoriums as well as environments with high concentrations of chlorine or salt and still maintain the 5 year warranty. For this natatorium rated process please specify NAT in options. Die-cast aluminum housing Extruded aluminum column Pre-treated before powder coating ensuring high corrosion resistance Grade 316 stainless steel fasteners Durable silicone rubber gasket Clear tempered glass Solar panel mono-crystalline silicon high-efficiency 4x10W Lithium Iron Phosphate (LiFePO4 ) battery 18Ah 12Vdc Solar charger controller system 12V 10A Different dimming scenarios: 5 Step dimming, 2 Step dimming, Dusk to Dawn (D2D) and Custom hours Maximum 15 hours of operation time (100%) Without any sun (Autonomy), the battery would last for maximum 5 days Full automatic electronic protection function against short circuit, overcurrent, overload, overvoltage and high temperature Peak Sun-Hour used in the calculations is 3 hours per day Remote solar charge controller Standard: Off-grid, 100% solar, not connected to the utility grid. Utility grid connection is available upon request

Model Number: USE-900XX-SO-X0 Ratings: IP66 IK08 A slim wedge shaped, high pressure diecast, pole mounted, area light with A distributions to suit all lighting designer's requirements. The Steamer with MicroVOS® optics allows precise control of light distribution, offering IES Type II, III, IV, along with custom variations. Multiple micro distributions can be combined within a single fixture, ensuring optimal performance for specific site requirements. Internal house side shields are available as an option. Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops.

Model Number: UFOR-200XX-SO-X0 Ratings: IP65 IK10 A decorative range of post top luminaires, designed to complement the Forrey pendant, bollard and wall mount with options of having no lens or a high impact UV stabilized opal lens. This decorative lantern provides a symmetrical light distribution using high output COB LED. Color temperature 2700K, 3000K, 3500K and 4000K, LED CRI >80 and life time 50,000 hours. High pressure die-cast marine grade LM6 aluminum body that is pre-treated with a nickel and zinc phosphate and then powder coated with a 4.9mil thick paint finish ensuring high corrosion resistance. Grade 316 stainless steel fasteners. Durable memory retentive silicone rubber gasket and clear high impact naturally UV stabilized acrylic lens. Anodized high purity aluminum reflector.

Model Number: UPRA-100XX Ratings: IP65 IK07 Medium size LED bollards with integrated PV panels and MicroVOS® optics. Clean architectural design with no visible hardware, at the top of the luminaire are the further characteristics of this bollard. Ideal for lighting pathways, entrances, square, and terraces. Extruded aluminum column Pre-treated before powder coating ensuring high corrosion resistance Grade 316 Stainless steel fasteners Durable silicone rubber gasket Clear tempered glass Solar panel mono-crystalline silicon high-efficiency 4x10W Lithium Iron Phosphate (LiFePO4 ) battery 18Ah 12Vdc Solar charger controller system 12V 10A Different dimming scenarios: 5 Step dimming, 2 Step dimming, Dusk to Dawn (D2D) and Custom hours Maximum 15 hours of operation time (100%) Without any sun (Autonomy), the battery would last for maximum 5 days Full automatic electronic protection function against short circuit, overcurrent, overload, overvoltage and high temperature Peak Sun-Hour used in the calculations is 3 hours per day Remote solar charge controller Standard: Off-grid, 100% solar, not connected to the utility grid Utility grid connection is available upon request

Model Number: UBIU-9000X-SO-X0 Ratings: IP66 IK08 A slim modern style, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer’s requirements. The Billund with MicroVOS® optics allows precise control of light distribution, offering IES Type II, III, IV, along with custom variations. Multiple micro distributions can be combined within a single fixture, ensuring optimal performance for specific site requirements. Internal house side shields are available as an option. Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops.

Model Number: ULH-108XX Ratings: IP65 F CE IK07 Our Lightsoft solar bollards feature integrated PV panels on all sides for optimal 360° daylight harvesting. The sleek form factor and innovative reflector design deliver high efficiency with visual comfort. Designed for controlled downward light and wide spacing ratios, Lightsoft includes three shield accessories for customized distributions, ideal for walkways, parks, and landscaped areas Extruded aluminum column Pre-treated before powder coating ensuring high corrosion resistance Grade 316 Stainless steel fasteners Durable silicone rubber gasket Clear tempered glass Solar panel mono-crystalline silicon high-efficiency 4x10W Lithium Iron Phosphate (LiFePO4 ) battery 18Ah 12Vdc Solar charger controller system 12V 10A Different dimming scenarios: 5 Step dimming, 2 Step dimming, Dusk to Dawn (D2D) and Custom hours Maximum 15 hours of operation time (100%) Without any sun (Autonomy), the battery would last for maximum 5 days Full automatic electronic protection function against short circuit, overcurrent, overload, over voltage and high temperature Peak Sun-Hour used in the calculations is 3 hours per day Remote solar charge controller can be ordered as an accessory Standard: Off-grid, 100% solar, not connected to the utility grid Utility grid connection is available upon request

Model Number: UAR-21052-SO-X0 Ratings: IP65 CE IK08 The Arizona is an elegant solar-powered post-top luminaire that complements both modern and classic architecture. Designed for visual guidance with exceptional comfort, it features a dual-sealed optical chamber with heat sinks and field-interchangeable MicroVOS distributions. As part of a coordinated product family, Arizona Solar provides a consistent design aesthetic across any site.

Model Number: PO29-GP041-SO-X0 Ratings: IP66 IK08 Engineered from the base up with environmental consciousness and energy efficiency in mind, LIGMAN's PowerMission series, developed specifically to fulfill the demanding conditions of road and street lighting applications, are highly flexible and can be easily retrofitted onto existing street lighting infrastructure making it a state-of-the-art technology that is practical and affordable. MicroVOS® optical technology minimizes light pollution and optimizes light distribution ensures that only the targeted areas are illuminated, reducing unwanted light trespass and sky glow. This characteristic ensures PowerMission's compliance to the Dark Sky requirements. A high quality die-casted aluminum casing not only houses the control gear and the light modules but it also acts as the primary thermal management device, eliminating the need for additional and sometimes bulky heat sinks while improving the overall performance and extending the life span of the LEDs. Product Features Compatible with all PowerMission products On board connectors make installation and maintenance activities quick and simple Modular design for effortless upgrades to future LED generations Flexibility to change over optical distribution or to customize distributions as per application requirements Unique overlapping optics ensures no 'dark spots' in the event of partial failure LEDs are designed to 'fail short' to prevent catastrophic failures of modules in the event of single or multiple LED chip failures

Complementing the Arizona family of outdoor floodlight columns and wall mounted sconces, is the Arizona 8. The Arizona 8 is an 8.8" diameter column and incorporates precision optics that provides a type V distribution and type II, III and IV distribution housed within an ultra high impact clear acrylic lens. This modern aesthetic design can be used to light areas, such as campuses, parks, recreational areas and public spaces.This luminaire is provided with an integral driver housed within a waterproof electrical compartment secured inside the pole. The luminaire is pre-wired with power cord to the handhole to simplify installation. The Arizona is available with two different LED packages, namely COB which is available with a very wide type V distribution and the HP LED version for Type II, III and IV distributions.The Arizona 8 is unique in the fact that the pole features a laser cut pattern with internal lighting for static white or color changing RGBW. Patterns can be customized to suit design.Color temperatures include; 2700, 3000, 3500 and 4000 Kelvin for the Arizona top light. Reduced wattages can be provided to adhere to Title 24 requirements. For non standard fixture variations, as well as specific perforated reflector requirements and decoerative house side shields, please contact the factory. This product is provided complete with anchor bolts and a laser cut steel bolt template.

A stylish Dark Sky Compliant square high performance wall mounted luminaire with downward light distribution using LED lamps. This light column offers optimal visual comfort through glare control by utilizing a controlled optics designed by Ligman. These luminaires have a square design providing a unique wide light distribution, offering an architecturally appealing shadow pattern on the mounted surface. The internal sides of the supporting pillars are accented by light from the LED. Color temperature 2700K, 3000K, 3500K and 4000K and RGBW. The minimalistic shape provides distinctive lighting effects by night and decorative urban effect during the day.Suitable for pedestrian areas, precincts, building surrounds, shopping centers, squares and parks. The Vancouver comes standard with a unique waterproof internal driver housing compartment that is situated at the top of the pole to stop water and dust from entering the electrical components. This fixture is supplied completely wired with powercord and waterproof gland from the driver enclosure to the base of the column to ensure quick trouble-free installation. Custom heights are available, please specify in options. Designed to complement the Vancouver Light Column and bollard.

The Boca Lighting and Controls HPNLS-HO-WD is a shallow-profile fixture well suited for many lighting situations where both space and locating transformers are concerns.

Boca Lighting and Controls's NanoX is an ultra-sleek, exterior-rated line-voltage luminaire designed for façade accents, under-eave and canopy applications where space is tight and energy efficiency is critical.

Boca Lighting and Control’s NanoLume is a line voltage fixture perfect for Cove Lighting or Task Lighting areas where space, budget and energy are a factor.

The Boca Lighting and Controls SBL-Mix is a powerful instrument developed for large-coverage illumination.

Boca Lighting and Controls’s Nano HD is the latest addition to the popular NanoLume family.

Even color washing, also at short distances.

The Boca Lighting and Controls HPNLS-HO is a shallow-profile fixture well suited for many lighting situations where both space and locating transformers are concerns.

The Boca Lighting and Controls HPFB is a dual-row fixture that uses Boca’s patented technology for RGB additive color mixing.

The Boca Lighting and Controls HPNLS-MIX is the newest addition to the popular HPNLS family of fixtures.

Even color washing, also at short distances.

The Boca Lighting and Controls HPNLS-LO is a small-profile fixture well suited for many lighting situations where both space and locating transformers are concerns.

Tuneable, dimmable white light fixture for those spaces where temperature adjustment is essential, and suited for exterior or damp locations.

The Boca Lighting and Controls Lumeline-RT is a shallow profile fixture well suited for direct view applications.

The Boca Lighting and Controls HPNFC-RT is a small-profile fixture well suited for many lighting situations where space is a concern.

The Boca Lighting and Controls HPNLS-LO is a small-profile fixture well suited for many lighting situations where both space and locating transformers are concerns.

The Boca Lighting and Controls Lumeline is a shallow-profile fixture well suited for direct view applications.

A line voltage fixture perfect for Cove Lighting or Task Lighting areas where space, budget and energy are a factor. Boca’s CleanDim® technology ensures even dimming from 0-100%.

Boca Lighting and Controls’s NanoWedge is a small profile line voltage fixture well suited to installations areas where space and energy consumption are of concern.

The Boca Lighting and Controls HPNFC-HO is a shallow-profile fixture well suited for many lighting situations where both space and locating transformers are concerns.

The Boca Lighting and Controls HPNLS-HO is a shallow-profile fixture well suited for many lighting situations where both space and locating transformers are concerns.

The Boca Lighting and Controls HPNLS-RT is a very small fixture well suited for many lighting situations wherespace is a concern.

Tuneable, dimmable white light fixture for those spaces where temperature adjustment is essential.

The SBL-MC Lighting System is the perfect choice for Wall Washing & Facades.