160 manufacturers · 18,987 products

Aquaflex® is a wet location flexible linear system that uses special grade silicone rubber housing. The housing is designed for a long life span by providing non-tear durability, extreme low and high temperature immunity and consistent color filters in order to avoid discoloration. Aquaflex arrives with up to 158 lm/ft and is field cuttable for easy installation.

Model#: UKI-606XX A top range of small shallow inground uplights with a round or square profile available with an extended or flush mounted frame. The fixture is manufactured with a marine grade 316 stainless steel front ring and is designed for use in shopping and pedestrian areas for illuminating building facades, columns, squares, parks, gardens, sculptures, flag poles and trees. The adjustable high powered LEDs in conjunction with high efficiencty optics provides focused beam distributions to suit most design applications. The tapered high density polyethylene inground recessing box is provided with securing lugs on each side to allow the installer properly secure the box in place thereby stopping it from moving during the concrete pour procedure. Theses securing lugs can also be used to secure the base to wood support beams and working in conjunction with the tapered recessing box will prevent the fixture from lifting when installed in dirt. The housing also has two shoulders to prevent fixture rotation when used in driver over applications. The Kios is available with a non-slip ADA glass. This glass is infused with a specialized non-slip finish across the entire surface of the lens making this non-slip option the best in the industry. To ensure efficient drainage, gravel must be used to a depth of 17" and a width of 12" beneath the housing, and should also be placed around the luminaire. An animated video can be viewed on the Ligman website to show proper Kios installation procedure to assist contractors and ensure a problem-free installation. Power is provided to the integral control gear through a specially developed anti-wicking PG13.5 watertight cable gland and 2ft of outdoor submersible #18/. SOOW 600v power cable. Clear or frosted tempered 0.6" thick glass. 2.5 ton maximum load is transferred by the housing to the foundation. Vehicles with pneumatic tires can drive over the luminaire, but

Model#: UHA-60XXX Suitable for wet locations A top range of inground uplights with a choice of round or square stainless steel or aluminum front rings, suitable to illuminate shopping and pedestrian areas, parks, gardens and sculptures. Main characteristics are low glare. The LED luminaires have features such as long life, limited maintenance and constant lifetime performance.This product has a standard 'touchable glass' ideally suited for spaces that are used by the general public. To ensure efficient drainage, gravel must be used to a depth of 17" beneath the housing, and should also be placed around the luminaire. Low copper content die-cast aluminum housing with high corrosion resistance. The 0.24" thick front ring is available in grade 316 stainless steel or aluminum. Stainless steel fasteners in grade 316. Power is provided through a single custom designed Ligman VSAW anti-wicking PG 1/2" water tight cable gland and 3ft of Outdoor Submersible #18/3 SOOW 600V power cable. Durable silicone rubber gasket and clear or frosted toughened 0.39" thick glass, walk over 440lbs. maximum. Body is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Optional Recessing box in high density polyethylene. Optional ADA anti slip surface.

Model#: UMK-60XXX A top range of inground guide lights with light distribution options from one, two or four sectors. Designed for use in shopping, pedestrian and park areas with a selection of low voltage, energy saving LEDs. To ensure efficient drainage, gravel must be used to a depth of 17" and a width of 12" beneath the housing and should also be placed around the luminaire. An animated video can be viewed on the Ligman website to show proper Mask installation procedure to assist contractors and ensure a problem-free installation. Power is provided to the integral control gear through a specially developed anti-wicking PG 13.5 watertight cable gland and 2ft of outdoor submersible #18/3 SOOW 600v power cable. A 4500lb maximum load is trasnferred by the housing to the foundation. Vehicles with pneumatic tires can drive over the luminaire, but the speed must not exceed 6mph. Recessing box in high density polyethylene is included. The high power LED optoin is available in white 2700, 3000 and 4000K.

Model#: ULA-300XX Light Linear LA 6 wall washer floodlights are designed as a perfect solution for color changing applications, as well as static color for architectural structures, wall grazing, column lighting and linear floodlighting. Luminaire is suitable for many applications including commercial, historic or modern architectural interiors and exteriors. Two different lengths are provided allowing the luminaire installation to be tailored exactly to the architectural structure. The luminaire is provided with an integral driver for LA 6 & 7, remote driver for LA 8. Luminaires can be installed without any gaps. A remote driver can be provided for the LA 6 & 7 fixtures, please contact the factory for more details. Light Linear LA is available in 2700K, 3000K and 4000K. LED CRI >80. Light Linear LA 7 is perfect for solidstate lighting RGBW color changing. 316 Stainless steel mounting hardware. Durable high-temperature silicone gasket and clear tempered 8mm thick glass. The luminaire is treated with a chemical nickel and zinc phosphate protection before powder coating (4.7 mil thickness), ensuring high corrosion resistance.

Model#: ULA-400XX Light Linear LA 9 recessed wall luminaires are designed to offer a functional, wide range of lighting solutions for use in gardens, residential areas, shopping areas, parks and pedestrian areas. Luminaires are suitable for many applications including commercial, historic, or modern architectural interiors and exteriors. Two different lengths are provided allowing the luminaire installation to be tailored exactly to the architectural structure. The luminaire is provided with an integral driver. A remote driver can be provided, please contact the factory for more details. please contact the factory for more details. Light Linear LA 9 is is available in 2700K, 3000K and 4000K. LED CRI >80. A low copper content high pressure die-cast and extruded aluminum body with high corrosion resistance. Power is provided through a single watertight cable gland. Two cable glands are available upon request for thru wiring. Stainless steel 316 mounting hardware. Durable high-temperature silicone gasket and clear tempered 8mm thick glass. The luminaire is available in 2 lengths with a standard aluminum frame, stainless steel marine grade 316 frame is available as an option. The luminaire is treated with a chemical nickel and zinc phosphate protection before powder coating (4.7 mil thickness), ensuring high corrosion resistance.

Model#: UKI-60XXX A top range of small shallow inground uplights with a round or square profile available with an extended or flush mounted frame. The fixture is manufactured with a marine grade 316 stainless steel front ring and is designed for use in shopping and pedestrian areas for illuminating building facades, columns, squares, parks, gardens, sculptures, flag poles and trees. The adjustable high powered LEDs in conjunction with high efficiencty optics provides focused beam distributions to suit most design applications. The tapered high density polyethylene inground recessing box is provided with securing lugs on each side to allow the installer properly secure the box in place thereby stopping it from moving during the concrete pour procedure. Theses securing lugs can also be used to secure the base to wood support beams and working in conjunction with the tapered recessing box will prevent the fixture from lifting when installed in dirt. The housing also has two shoulders to prevent fixture rotation when used in drive-over applications. The Kios is available with a non-slip ADA glass. This glass is infused with a specialized non-slip finish across the entire surface of the lens making this non-slip option the best in the industry. To ensure efficient drainage, gravel must be used to a depth of 17" and a width of 12" beneath the housing, and should also be placed around the luminaire. An animated video can be viewed on the Ligman website to show proper Kios installation procedure to assist contractors and ensure a problem-free installation. Power is provided to the integral control gear through a specially developed anti-wicking PG13.5 watertight cable gland and 2ft of outdoor submersible #18/. SOOW 600v power cable. Clear or frosted tempered 0.6" thick glass. 2.5 ton maximum load is transferred by the housing to the foundation. Vehicles with pneumatic tires can drive over the luminaire,

Model#: UHA-60XXX Suitable for wet locations A top range of inground uplights with a choice of round or square stainless steel or aluminum front rings, suitable illuminate shopping and pedestrian areas, parks, gardens and sculptures. Main characteristics are low glare The LED luminaires have features such as long life, limited maintenance and constant lifetime performance. This product has a standard 'touchable glass' ideally suited for spaces used by the general public. To ensure efficient drainage, gravel must be used to a depth of 17" beneath the housing, and should also be placed around the luminaire. Low copper content die-cast aluminum housing with high corrosion resistance. The 0.24" thick front ring is available in grade 316 stainless steel or aluminum. Stainless steel fasteners in grade 316. Power is provided through a single PG1/2" water tight cable gland. Durable silicone rubber gasket and clear toughened 0.31" thick glass, walk over 440lbs. maximum. Body is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Remote driver on site by installer. Recessing box in high density polyethylene. Optional ADA anti slip surface.

Model#: UVR-702XX The innovative optical technology of the Veranda pillar light guarantees a high degree of efficiency and optimal visual comfort while fulfilling the dark sky criteria. The Veranda has been developed to have excellent controlled downward light, elimininating any glare. It has three light shields with different light distributions. Designed for lighting of entrances garden pathways and squares. This low level surface mounted luminiare is ideal for areas where inground product is not suitable, but horizontal lighting on the ground is required. Depending on the light distribution required, this fixture is available in 360°, 90°/90°, 90° and 180°. This vandal resistant luminaire can be installe using factory provided anchor bolts, as well as contractor provided wedge anchors.

Model#: ULA-950XX Light Linear LA luminaires are designed to be multi functional, offering a wide range of lighting solutions and dramatic highlighting effects. They are suitable for many applications and can be used in indoor and outdoor applications. The luminaires have features such as long life, low glare limited maintenance and constant lifetime performance. Two different lengths are provided allowing the luminaire installation to be tailored exactly to the architectural structure. The suspension height is fully adjustable. The luminaire is provided with an integral driver for Light Linear LA 3 and the Light Linear LA 4 uses a remote driver. The Light Linear LA is available in 2700K, 3000K and 4000K. A low copper content high pressure die-cast and extruded aluminum body with high corrosion resistance. Power is provided through a single watertight cable gland. Two cable glands are available upon request. Mounting hardware consists of stainless steel screws. Durable high-temperature silicone gasket and clear or frosted tempered glass. The luminaire is treated with a chemical nickel and zinc phosphate protection before powder coating (4.7 mil thickness), ensuring high corrosion resistance.

Model#: UKI-60XXX A top range of small shallow inground uplights with a round or square profile available with an extended or flush mounted frame. The fixture is manufactured with a marine grade 316 stainless steel front ring and is designed for use in shopping and pedestrian areas for illuminating building facades, columns, squares, parks, gardens, sculptures, flag poles and trees. The adjustable high powered LEDs in conjunction with high efficiencty optics provides focused beam distributions to suit most design applications. The tapered high density polyethylene inground recessing box is provided with securing lugs on each side to allow the installer properly secure the box in place thereby stopping it from moving during the concrete pour procedure. Theses securing lugs can also be used to secure the base to wood support beams and working in conjunction with the tapered recessing box will prevent the fixture from lifting when installed in dirt. The housing also has two shoulders to prevent fixture rotation when used in drive-over applications. The Kios is available with a non-slip ADA glass. This glass is infused with a specialized non-slip finish across the entire surface of the lens making this non-slip option the best in the industry. To ensure efficient drainage, gravel must be used to a depth of 17" and a width of 12" beneath the housing, and should also be placed around the luminaire. An animated video can be viewed on the Ligman website to show proper Kios installation procedure to assist contractors and ensure a problem-free installation. Power is provided to the integral control gear through a specially developed anti-wicking PG13.5 watertight cable gland and 2ft of outdoor submersible #18/. SOOW 600v power cable. Clear or frosted tempered 0.6" thick glass. 2.5 ton maximum load is transferred by the housing to the foundation.

Model#: UKI-606XX A top range of small shallow inground uplights with a round or square profile available with an extended or flush mounted frame. The fixture is manufactured with a marine grade 316 stainless steel front ring and is designed for use in shopping and pedestrian areas for illuminating building facades, columns, squares, parks, gardens, sculptures, flag poles and trees. The adjustable high powered LEDs in conjunction with high efficiencty optics provides focused beam distributions to suit most design applications. The tapered high density polyethylene inground recessing box is provided with securing lugs on each side to allow the installer properly secure the box in place thereby stopping it from moving during the concrete pour procedure. Theses securing lugs can also be used to secure the base to wood support beams and working in conjunction with the tapered recessing box will prevent the fixture from lifting when installed in dirt. The housing also has two shoulders to prevent fixture rotation when used in drive-over applications. The Kios is available with a non-slip ADA glass. This glass is infused with a specialized non-slip finish across the entire surface of the lens making this non-slip option the best in the industry. To ensure efficient drainage, gravel must be used to a depth of 17" and a width of 12" beneath the housing, and should also be placed around the luminaire. An animated video can be viewed on the Ligman website to show proper Kios installation procedure to assist contractors and ensure a problem-free installation. Power is provided to the integral control gear through a specially developed anti-wicking PG13.5 watertight cable gland and 2ft of outdoor submersible #18/. SOOW 600v power cable. Clear or frosted tempered 0.6" thick glass. 2.5 ton maximum load is transferred by the housing to the foundation. Vehicles with pneumatic tires can drive over the luminaire, but

Model#: ULA-600XX  Light Linear LA inground families are provided in RGBW color changing and static white color formats for wall grazing, wall washing, column lighting and uplight applications. Luminaires are suitable for many applications including commercial, historic, or modern architectural interiors and exteriors. Two different lengths are provided allowing the luminaire installation to be tailored exactly to the architectural structure. The luminaire is provided with an integral driver. A remote driver can be provided, please contact the factory for more details. The Light Linear LA 1 is available in 2700K, 3000K and 4000K. LED CRI >80 A low copper content high pressure die-cast and extruded aluminum body with high corrosion resistance. Power is provided through a single watertight cable gland. Two cable glands are available upon request for thru wiring. Stainless steel 316 mounting hardware. Durable high-temperature silicone gasket and clear tempered 8mm thick glass with a walk over rating of 1,102lb maximum load. The luminaire is available in 2 lengths with a standard stainless steel marine grade 316 frame. The luminaire is treated with a chemical nickel and zinc phosphate protection before powder coating (4.7 mil thickness), ensuring high corrosion resistance.

Model#: UKI-60XXX A top range of small shallow inground uplights with a round or square profile available with an extended or flush mounted frame. The fixture is manufactured with a marine grade 316 stainless steel front ring and is designed for use in shopping and pedestrian areas for illuminating building facades, columns, squares, parks, gardens, sculptures, flag poles and trees. The adjustable high powered LEDs in conjunction with high efficiencty optics provides focused beam distributions to suit most design applications. The tapered high density polyethylene inground recessing box is provided with securing lugs on each side to allow the installer properly secure the box in place thereby stopping it from moving during the concrete pour procedure. Theses securing lugs can also be used to secure the base to wood support beams and working in conjunction with the tapered recessing box will prevent the fixture from lifting when installed in dirt. The housing also has two shoulders to prevent fixture rotation when used in drive-over applications. The Kios is available with a non-slip ADA glass. This glass is infused with a specialized non-slip finish across the entire surface of the lens making this non-slip option the best in the industry. To ensure efficient drainage, gravel must be used to a depth of 17" and a width of 12" beneath the housing, and should also be placed around the luminaire. An animated video can be viewed on the Ligman website to show proper Kios installation procedure to assist contractors and ensure a problem-free installation. Power is provided to the integral control gear through a specially developed anti-wicking PG13.5 watertight cable gland and 2ft of outdoor submersible #18/. SOOW 600v power cable. Clear or frosted tempered 0.6" thick glass. 2.5 ton maximum load is transferred by the housing to the foundation. Vehicles with pneumatic tires can drive over the luminaire,

Model#: UKI-60XXX A top range of small shallow inground uplights with a round or square profile available with an extended or flush mounted frame. The fixture is manufactured with a marine grade 316 stainless steel front ring and is designed for use in shopping and pedestrian areas for illuminating building facades, columns, squares, parks, gardens, sculptures, flag poles and trees. The adjustable high powered LEDs in conjunction with high efficiencty optics provides focused beam distributions to suit most design applications. The tapered high density polyethylene inground recessing box is provided with securing lugs on each side to allow the installer properly secure the box in place thereby stopping it from moving during the concrete pour procedure. Theses securing lugs can also be used to secure the base to wood support beams and working in conjunction with the tapered recessing box will prevent the fixture from lifting when installed in dirt. The housing also has two shoulders to prevent fixture rotation when used in drive-over applications. The Kios is available with a non-slip ADA glass. This glass is infused with a specialized non-slip finish across the entire surface of the lens making this non-slip option the best in the industry. To ensure efficient drainage, gravel must be used to a depth of 17" and a width of 12" beneath the housing, and should also be placed around the luminaire. An animated video can be viewed on the Ligman website to show proper Kios installation procedure to assist contractors and ensure a problem-free installation. Power is provided to the integral control gear through a specially developed anti-wicking PG13.5 watertight cable gland and 2ft of outdoor submersible #18/. SOOW 600v power cable. Clear or frosted tempered 0.6" thick glass. 2.5 ton maximum load is transferred by the housing to the foundation. Vehicles with pneumatic tires can drive over the luminaire, but

Light Linear LA 6 wall washer floodlights are designed as a perfect solution for color changing applications, as well as static color for architectural structures, wall grazing, column lighting and linear floodlighting. Luminaire is suitable for many applications including commercial, historic or modern architectural interiors and exteriors. Two different lengths are provided allowing the luminaire installation to be tailored exactly to the architectural structure. The luminaire is provided with an integral driver for LA 6 & 7, remote driver for LA 8. Luminaires can be installed without any gaps. A remote driver can be provided for the LA 6 & 7 fixtures, please contact the factory for more details. Light Linear LA is available in 2700K, 3000K and 4000K. LED CRI >80. Light Linear LA 7 is perfect for solidstate lighting RGBW color changing. 316 Stainless steel mounting hardware. Durable high-temperature silicone gasket and clear tempered 8mm thick glass. The luminaire is treated with a chemical nickel and zinc phosphate protection before powder coating (4.7 mil thickness), ensuring high corrosion resistance.

Therecessed ceiling downlightideal fordecorative and functional lightingin contexts requiringmaximum protection. Its resistant structure and compact design, with shallow depth installation required, concentrates excellent performance and variety of optics, making it a versatile lighting solution, that fits a wide range of applications.

The in-ground luminaires for functional and scenographic lighting

The in-ground luminaires for functional and scenographic lighting

The in-ground luminaires for functional and scenographic lighting

The recessed wall luminaire for functional outdoor lighting

The in-ground luminaires for functional and scenographic lighting

Orion Energy Systems VTOD2 product is NSF/ANSI Standard 2. Durable and versatile fixture suitable for demanding environments that require a dust-proof fixture or watertight seal such as food-processing facilities, breweries, agricultural, wash down applications and cooler/freezer environments.

Orion Energy Systems VTON2 product is NSF/ANSI Standard 2. Durable, versatile fixture suitable for demanding environments that require a watertight seal such as food-processing facilities, milking parlor, wash down applications and cooler/ freezer environments.

Durable and versatile fixture suitable for demanding environments that require a dust-proof fixture or watertight seal such as food-processing facilities, breweries, agricultural, wash down applications and cooler/freezer environments

The ISON IAHP1 industry leading lumen per watt performance maximizes energy savings and leads to the lowest total cost of ownership for exterior lighting. The ISON Area Light High Performance provides uniform distribution for area and site lighting in retail, commercial, and residential applications including driveways and parking areas. Replaces up to 1200W HID high intensity discharge fixtures.

Series of spot lights to be mounted on floor, wall, spike, tree with belt system or on a pole system

The Corrimano is a sleek, architectural-grade LED handrail luminaire engineered for durability, performance, and refined aesthetics

Introducing the Calamus, a sleek and modern lighting solution designed to elevate the aesthetics of any space

Series of spot lights to be mounted on floor, wall, spike, tree with belt system or on a pole system

Bollards for outdoors with unique and elegant designs, using the grammar of contemporary architecture for the first time thanks to the use of special materials, and transparent and light forms

The Segno P by BULLARD BOLLARDS is a modern outdoor bollard luminaire designed for elegant, indirect illumination of pathways, gardens, and open-air architectural spaces

A beautifully designed outdoor lighting solution that blends seamlessly with your garden landscape

The ZACK D31 by Bullard Bollards is a compact, vandal-resistant outdoor luminaire designed for architectural and landscape use, offering 360° radial light distribution with a sleek, low-profile form

Series of spot lights to be mounted on floor, wall, spike, tree with belt or on a pole system.

Side-bending flexible fixture with a medium form factor. Light curved details or create long, straight runs of dotless linear light. Standard color temperatures (CCTs) from 2400K to 4000K, and light output up to 80+ lumens per foot.

Round, flexible architectural light that bends and emits light in all directions. Water resistant with precision light quality and full diffusion for a dotless look. Standard color temperatures (CCTs) from 2400K to 4000K, and light output up to 250+ lumens per foot.

Top-bending flexible fixture with a medium form factor. Light curved details or create long, straight runs of dotless linear light. Standard color temperatures (CCTs) from 2400K to 4000K, and light output up to 150+ lumens per foot.

Small, flexible architectural light that bends in both top and side directions to fit any space. Water resistant with precision light quality and full diffusion for a dotless look. Place long runs of linear light anywhere – including wet locations – with this versatile, elegant linear light. Standard color temperatures (CCTs) from 2400K to 4000K, and light output up to 80+ lumens per foot.

Flexible architectural light that bends in both top and side directions to fit any space. Water resistant with precision light quality and full diffusion for a dotless look. Place long runs of linear light anywhere – including wet locations – with this versatile, elegant linear light. Standard color temperatures (CCTs) from 2400K to 4000K, and light output up to 150+ lumens per foot.

The VANDAL bollard is designed and built to achieve the highest Vandal-resistant rating, IK10+