160 manufacturers · 18,987 products

Model#: ULEW-300XX A range of small, wedge-shaped, wall mounted luminaires with options of downward light distributions. Ideally suited to illuminate the wall and surfaces in front of wall and for light accents on vertical surfaces using high efficiency LED’s. The Leeds Wedge is suitable for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive wall mounted luminaires. This luminaire is available in 3 different sizes and utilizes microVos technology, meaning the ability to do Type I,II,III,IV & V distributions as well as hybrid distributions to suit the designer’s requirements. Using the microVos optics allows for very wide spacing to mounting height ratios, while still providing perfect uniformity and code compliant light levels.

Model#: UBIU-900XX A slim modern style, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer’s requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy. The Billund can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and ME optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. This luminaire complies to dark sky requirements when mounted in the horizontal position. Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option. Available with a selection of integral electronic and dimmable electronic drivers. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: UMC-100XX A modern style die-cast aluminum bollard with excellent downward light distribution that complies with dark sky requirements. Outstanding visual appeal and precision optical system gives very low glare rating, whilst reducing light pollution. This fixture is available in two standard heights, however custom heights can be specified. This bollard is available with the following light distributions to maximize spacing and vastly improve uniformity; Type II, III, Wide and Very Wide. Color temperature 2700K, 3000K, 3500K and 4000K, LED CRI >80 and life time 50,000 Hours. Stainless steel screws. Durable silicone rubber gasket. Powder paint with high corrosion resistance with chemical chromatised protection. Integral control gear. Customer specifice wattages can be provided, please contact the factory for more information.

Model#: UVK-200XX A slim wedge shaped pole mount area light with a variety of different distributions to suit lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using a low wattage LED package. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy. The Vekter can be utilized to suit specific light patterns using the asymmetrical type I, II, III, IV as well as symmetrical lens optics. Variations of these for precise light distribution requirements can be provided. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are available. These fixtures are adjustable, and can also be aimed as floodlights to provide focus lighting in specific areas, as well as facade lighting. This luminaire is suitable for most applications and complies to dark sky requirements when mounted in the horizontal position. Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.

Model#: UBA-311XX A decorative range of cylindrical and square shape wall lanterns with symmetrical light distribution. Developed to complement the Bamboo bollard. Designed for lighting of entrances and residential areas. These luminaires produce pleasant soft light with a high level of visual comfort. The Bamboo is provided with options of clear or opal lenses to suit customer requirements and comes standard with a unique waterproof internal driver housing compartment that is situated at the top of the cylinder to stop water and dust from entering the electrical components.

Model#: UJE-2000X A square post top lantern with excellent downward symmetrical light distribution. Developed to complement the Jet wall light, bollard and pendant. Symmetrical optics suitable for most applications and dark sky compliant. Designed for lighting of entrances, footpaths and car parks. The luminaire has an integral driver and is available in the following color temperatures; 2700K, 3000K and 4000K. This product is available with field interchangeable narrow, medium, wide and very wide optics.

Model#: UAA-100XX A decorative bollard with a symmetrical light distribution. Developed to complement the Atlantic range of pillar lights, post top and wall luminaires. Designed for various application including; entrances, gardens, precincts and pathways. Low copper content corrosion resistant extruded die-cast aluminum column. 316 stainless steel hardware, durable silicone rubber gasket and impact resistant tempered opal diffuser. The luminiare is treated with a chemical nickel and zinc phosphate protection before powder coating (4.9 mil thickness), ensuring high corrosion resistance. Integral control gear.  This fixture is provided with an integrated waterproof driver box at teh top of the bollard that ensures that the electrical components are protected from water and dust. This fixture is prewired to the base of the bollard to facilitate easy electrical connections onsite. A laser cut anchor bolt template is provided for accurate anchor bolt installation. Options of house side shields and GFCI boxes are available.

Model#: UIT-31XXX A range of vandal resistant circular wall and ceiling mounted sconces with an option of flat or dome front opal vandal resistant UV stabilized polycarbonate diffuser that gives off a subtle backlight. Ideal for numerous indoor or outdoor applications. This luminaire can be provided with an integral occupancy sensor. The Itac 1 has a flat front lens and the Itac 2 is provided with a dome front. All Ligman fixtures can be manufactured using a special pre-treatment and coating process that ensures the fixture can be installed in natatoriums as well as environments with high concentrations of chlorine or salt and still maintain the 5 year warranty. For this natatorium rated process please specify NAT in options.

Model#: UAB-100XX A range of rectangular shaped bollards that complement the Abacus wall mounted luminaires providing downward Dark Sky compliant light distributions. Ideally suited to illuminate walkways, as well as providing decorative light accents in parks and public spaces using high effciency LEDs. The Abacus is suitable for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive bollard installations. This product range is available with surface mounted options with 3 different shapes. This product is provided with integral driver and special gasketing to ensure no water enters the luminaire. This product is provided with anchor bolts and laser cut steel bolt template to ensure accurate installation.

Model#: UPR-50XXX Suitable for wet locations A range of small robust and compact round or square on-ground up-lights for outdoor lighting effects using energy saving LED's, and metal halide lamps. The luminaires have adjustable aiming function that can be locked into place after establishing the required light distribution. Designed for use in squares, parks, residential and shopping areas. This product is excellent for illuminating sculptures, trees and landscape environments where in-ground product is not required. Optional colored diffuser, lenses, filters and louvers are available to control the light. The LED luminaires have features such as long life, limited maintenance and constant lifetime performance. Low copper content corrosion resistant die-cast aluminum body. Integral control gear. All external hardware in stainless steel. Durable silicone rubber gasket and clear toughened glass. Anodized high purity aluminum reflector. The luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.

Model#: UTU-X01XX The Tauras is a decorative bollard that is suitable for both modern and classic architecture. Ideal for creating visual guidance with exceptional visual comfort. This product was developed to complement the Tauras range of pillar lights, wall sconces and light columns. The sleek shape provides distinctive lighting effects by night and decorative urban  effects during the day. Suitable for pedestrian precincts, building surrounds, shopping centers, squares and parks. The luminaire is provided with a clear or opa ultra high impact UV stabilized acrylic lens that provides excellent low glare vertical and horizontal illumination.  The Tauras bollard comes standard with a unique waterproof internal driver housing compartment that is situated at the top of the pole to stop water and dust from entering the electrical components. This fixture is supplied completely wired with powercord and waterproof gland from the driver enclosure to the base of the bollard ensuring quick trouble-free installation. Custom bollard heights are available. Color temperatures of 2700, 3000 and 4000 Kelvin.  Security Bollard The Tauras bollard is available as a traffic rated security bollard. This optional design includes a 1/4" wall thick galvanized steel security pole with 2 solid 1" galvanized steel cross support rods that are embedded into concrete. This secuirty bollard provides restraint of vehicular traffic in unauthorized areas. Impact studies show this bollard will stop a 5,500lb vehicle travelling at 30mph. For additional strength, the galvanized pole can be filled with concrete up to the waterproof driver housing to provide a sold concrete barrier.

Model#: ULEE-300XX  A range of small, square and rectangular, ADA compliant wall mounted luminaires with options of upward or downward light distributions. Ideally suited to illuminate the wall and surfaces in front of wall and for light accents on vertical surfaces using high efficiency LED’s. The Leeds is suitable for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive wall mounted luminaires. This luminaire is available in 3 different sizes and in combinations of down, up or up/down light distributions. This fixture utilizes microVos technology, meaning the ability to do Type I,II,III,IV & V distributions as well as hybrid distributions to suit the designer’s requirements. Using the microVos optics allows for very wide spacing to mounting height ratios, while still providing perfect uniformity and code compliant light levels.

Model#: ULD-300XX A range of square outdoor IP66 wall sconce that meets both aesthetic and functional applications. This cubic wall sconce range is available with 4 different sizes, starting with a small 2.4" square profile at 3w, and increases proportionately to 3" at 11w, 4.5" at 21w and 5.5" square at 40w. This glare free luminaire is available in Narrow beam, Medium, Wide, Very Wide and Elliptical beam patterns. This luminaire is engineered to meet harsh outdoor environments, as well as being able to be used as a decorative indoor product. The Lador is provided with an integral driver and has accessories that include; dichroic color filters, linear spread lens, honeycomb louvres and anti-glare visors. The Lador product family consists of; floodlights, wall sconces, ceiling mounted squares and cluster column event poles. This luminaire is available with a natatorium rated coating.

Model#: UNI-80XXX Suitable for wet locations A compact recessed exterior downlight with a round or square front frame design. Options of stainless steel or powder coated aluminum front frame. The luminaires are designed for use in interior and exterior applications. This fixture is totally waterproof. This means that the fixture can be exposed to the elements from above as well as below. This luminaire is manufactured with integrated heat sinks that provides exceptional cooling and heat dissipation ensuring long LED life. This fixture can also be provided with a concrete pour box for casting into concrete slabs, please see opions below. Power is provided to the luminaire through a single PG9 watertight cable gland and 4ft of Outdoor Submersible #18/3 SOOW 600V power cable. Remote mounted transformer. Includes A80191 driver enclosure box.

Model#: UAA-950XX A decorative range of pendants designed to complement the Atlantic wall light, bollard, pillar light, pole top and shepherds crook with options of straight or swept shades with a dome or cone top. This decorative lantern provides a symmetrical light distribution using high ouput COB LED. Designed for lighting entrances, retail outlets, malls and showrooms. This product is available with a swivel mount attachment up to 90° pivot angle for seismic requirements, as well as sloped ceiling applications. The ceiling mount driver enclosure housing covers a 3" octagonal recessed j-box. Contractor to use proper securing devices for the ceiling material on the job to ensure a sturdy and safe installation. This product is provided with an integral driver and a borosilicate glass lens. The pendant is provided with a 1/2" painted galvanized steel pendant rod with various ceiling mount attachments to suit customer requirements. For custom pendant lengths, please specify. The standard wattage for this fixture is 41w, for higher or lower wattages, please contact the factory.

Model#: UOD-800XX  The Odessa is designed with a tempered low iron glass lens, stainless steel cable gland, die-cast aluminum body and an integrated passive heat sink design. The fixture can be surface mounted on ceilings, walls or on ground using the adjustable arm. The Odessa offers a compact design and high lumen output using a COB LED. The Odessa has reliable thermal management which guarantees long life and lumen maintenance. Excellent CRI for actual color reproduction. Eco-friendly LED luminaire for energy savings and visual consistency. Easy maintenance and replaceable COB LED. This floodlight is available with tree strap, garden spike, concentric ring, colored dichroic lenses and anti-glare attachments. This product is supplied complete with integral driver, but can be provided with remote drivers for low voltage wiring applications.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: UGN-300XX A range of top qualtiy ADA compliant decorative linear surface mount luminaires. This small profile decorative wall sconce with upward, downward or up/down light distributions is avaialable in 4 sizes, namely 11.8", 23.4", 35" and 47" lengths. The Gini has integral drivers and lightly frosted low glare tempered glass lenses. A special recessing box is provided to facilitate easy installation. This IP65 luminaire can be used for indoor, as well as outdoor applications. Ideally suited to illuminate wall surfaces and light accents.

Model#: UFRA-100XX Stylish signature seating bollard with numerous combination options for finishes and lighting. Combine your luminiare and seating needs into one piece of contemporary urban lighting furniture. This modern bollard is ideal for providing light, as well as seating at commercial building entrances, parks, recreational areas, as well as schools and universities. This robust luminaire provides ambient light in the evenings as well as functional seating. The luminaire has an incorporated LED band at the base of the bollard that provides a decorative glow and can be ordered with static white, or color changing RGBW. Aside from Ligman’s standard color options, these luminaires can be produced in various custom finishes, as well as the option of having the top and bottom sections in different colors to match corporate or school/university colors. This range of rectangular bollards, with regressed LEDs provides excellent glare control. Color temperature 2700K, 3000K, 3500K and 4000K, LED CRI >80 and lifetime 50,000 Hours. Low copper content die-cast aluminum housing with a high corrosion resistance. This fixture is supplied completely wired with powercord and waterproof gland from the driver enclosure to the base of the column to ensure quick trouble-free installation. This bollard is designed to support a +/-330lb static load.

Model#: UAA-3XXXX A small and medium size shade decorative wall lantern with symmetrical light distribution. Developed to complement the Atlantic bollard and Atlantic pillar light. Designed for lighting of entrances and footpaths. Custom wattages can be provided to suit customer and Title 24 requirements.

Model#: UAUG-100XX A range of modern, contemporary bollard luminaires providing a minimalistic and urban appeal. The Augusta is suitable for indoor and outdoor applications and provides a clean and visually appealing solution for bollard luminaires. This bollard luminaire is available in 3 different sizes, as well as wall mount combinations to retain a common design aesthetic. This product is provided with an integral driver and special gasketing to ensure no water enters the luminaire. All Ligman fixtures can be manufactured using a special pre-treatment and coating process that ensures the fixture can be installed in natatoriums as well as environments with high concentrations of chlorine or salt and still maintain the 5 year warranty. For this natatorium rated process please specify NAT in options.

Model#: ULD-800XX A range of square outdoor IP66 ceiling down lights that meet both aesthetic and functional applications. This cubic ceiling range is available with 4 different sizes, starting with a small 2.4" square profile at 3w, and increases proportionately to 3" at 11w, 4.5" at 21w and 5.5" square at 40w. This glare free luminaire is available in Narrow beam, Medium, Wide, Very Wide and Elliptical beam patterns. This luminaire is engineered to meet harsh outdoor environments, as well as being able to be used as a decorative indoor product. The Lador is provided with an integral driver and has accessories that include; dichroic color filters, linear spread lens, honeycomb louvres and anti-glare visors. The Lador product family consists of; floodlights, wall sconces, ceiling mounted squares and cluster column event poles. This luminaire is available with a natatorium rated coating.

Model#: UFOR-950XX A decorative range of pendants designed to complement the Forrey wall light, bollard and post top with options of having no lens or a high impact UV stabilized opal lens. This decorative lantern provides a symmetrical light distribution using high output COB LED. Designed for lighting entrances, retail outlets, malls and showrooms. This product is available with a swivel mount attachment up to 90˚ pivot angle for seismic requirements, as well as sloped ceiling applications, please specify in options. The ceiling mount driver enclosure housing covers a 3” octagonal recessed j-box. Contractor to use proper securing devices for the ceiling material on the job to ensure a sturdy and safe installation. This product is provided with an integral driver. The pendant is provided with a 1/2” painted galvanized steel pendent rod with various ceiling mount attachments to suit customer requirements, please see options.

Model#: UKI-60XXX A top range of small shallow inground uplights with a round or square profile available with an extended or flush mounted frame. The fixture is manufactured with a marine grade 316 stainless steel front ring and is designed for use in shopping and pedestrian areas for illuminating building facades, columns, squares, parks, gardens, sculptures, flag poles and trees. The adjustable high powered LEDs in conjunction with high efficiencty optics provides focused beam distributions to suit most design applications. The tapered high density polyethylene inground recessing box is provided with securing lugs on each side to allow the installer properly secure the box in place thereby stopping it from moving during the concrete pour procedure. Theses securing lugs can also be used to secure the base to wood support beams and working in conjunction with the tapered recessing box will prevent the fixture from lifting when installed in dirt. The housing also has two shoulders to prevent fixture rotation when used in drive-over applications. The Kios is available with a non-slip ADA glass. This glass is infused with a specialized non-slip finish across the entire surface of the lens making this non-slip option the best in the industry. To ensure efficient drainage, gravel must be used to a depth of 17" and a width of 12" beneath the housing, and should also be placed around the luminaire. An animated video can be viewed on the Ligman website to show proper Kios installation procedure to assist contractors and ensure a problem-free installation. Power is provided to the integral control gear through a specially developed anti-wicking PG13.5 watertight cable gland and 2ft of outdoor submersible #18/. SOOW 600v power cable. Clear or frosted tempered 0.6" thick glass. 2.5 ton maximum load is transferred by the housing to the foundation.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: UVK-900XX The Vekter with Adjustable Arm is a wedge-shaped, low-profile luminaire designed specifically for downlight applications. This variant features an adjustable arm that allows for precise aiming, offering flexibility in directing light where it’s needed most. It is equipped with high-powered LEDs and a range of optical options, including Type II, III, IV, and V light distributions. These options support wider fixture spacing and uniform illumination across various site layouts. The Vekter can also be configured with mixed beam optics, such as combining Type II and Type IV within the same fixture, to achieve customized light distribution. Integral electronic control gear is housed in a waterproof enclosure. This luminaire is designed for use with the SC76 [2.99" x 3.5"] post tenon top. Pole and tenon are not included. Ideal for lighting footpaths, building facades, entrances, and surrounding parking areas, the Vekter with Adjustable Arm delivers targeted performance, versatility, and architectural appeal.

Model#: UKI-606XX A top range of small shallow inground uplights with a round or square profile available with an extended or flush mounted frame. The fixture is manufactured with a marine grade 316 stainless steel front ring and is designed for use in shopping and pedestrian areas for illuminating building facades, columns, squares, parks, gardens, sculptures, flag poles and trees. The adjustable high powered LEDs in conjunction with high efficiencty optics provides focused beam distributions to suit most design applications. The tapered high density polyethylene inground recessing box is provided with securing lugs on each side to allow the installer properly secure the box in place thereby stopping it from moving during the concrete pour procedure. Theses securing lugs can also be used to secure the base to wood support beams and working in conjunction with the tapered recessing box will prevent the fixture from lifting when installed in dirt. The housing also has two shoulders to prevent fixture rotation when used in drive-over applications. The Kios is available with a non-slip ADA glass. This glass is infused with a specialized non-slip finish across the entire surface of the lens making this non-slip option the best in the industry. To ensure efficient drainage, gravel must be used to a depth of 17" and a width of 12" beneath the housing, and should also be placed around the luminaire. An animated video can be viewed on the Ligman website to show proper Kios installation procedure to assist contractors and ensure a problem-free installation. Power is provided to the integral control gear through a specially developed anti-wicking PG13.5 watertight cable gland and 2ft of outdoor submersible #18/. SOOW 600v power cable. Clear or frosted tempered 0.6" thick glass. 2.5 ton maximum load is transferred by the housing to the foundation. Vehicles with pneumatic tires can drive over the luminaire, but

Model#: USM-1069X The Smith is an elegant bollard that is suitable for both modern and classic architecture. Ideal for creating visual guidance with exceptional visual comfort. A sleek and minimalist shape provides distinctive lighting effects by night and decorative urban effects during the day. Suitable for pedestrian precincts, building surrounds, shopping centers, squares and parks. The luminaire is provided with an ultra high impact UV stabilized acrylic lens that provides excellent low glare vertical and illumination. The Smith bollard comes standard with a unique waterproof internal driver housing compartment that is situated at the top of the pole to stop water and dust from entering the electrical components. This fixutre is supplied completely wired with powercord and waterproof gland from teh driver enclosure to the base of the bollard ensuring quick, trouble-free installation. Custom bollard heights are available. Color temperature include; 2700, 3000 and 4000 Kelvin. The Smith bollard has a matching light column available.  Security Bollard The Smith bollard is available as a traffic rated security bollard. This optional design includes a 1/4" wall thick galvanized steel security pole with 2 solid 1" galvanized steel cross support rodds that are embedded into the concrete. This security bollard provides restraint of vehicular traffic in unauthorized areas. Impact studies shows this bollard will stop a 5,500lb vehicle travelling at 30mph. For additional strength, the galvanized pole can be filled with concrete up to the waterproof driver housing to provide a solid concrete barrier.

Model#: UZA-500XX The Zaab family of floodlights have a modern aesthetic design and are a perfect lighting solution for most small to medium size spotlight and floodlight requirements. The floodlights can be aimed and locked in place to highlight specific features or elements in the environment, as well as provide security when illuminating dark areas on campuses and parks. This small an dmedium range of high performance LED floodlight luminaires provides a robust design for demanding applictaions such as recreational areas, public spaces and architectural structures. The luminaire has integrated heat sinks to facilitate LED cooling, as well as an integral driver. The Zaab is available in Narrow, Medium, Wide and Very Wide light distributions. Color temperature 2700K, 3000K and 4000K. Luminaire has optional accessories, such as visors, louvres, and linear spread lenses. For non standard fixture variations, as well as specific reflector requirements and dichroic filters, please contact the factory.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: UMO-800XX Mondova small and medium exterior waterproof downlight range makes this luminaire a unique and attractive option for most outdoor design applications. This innovative 4" deep low profile die-cast aluminum luminaire is designed with integrated heat sink, as well as waterproof die-cast driver housing. This unit is suitable for all wet location environments, as well as applications where the fixture is exposed to water, not only from below, but also from above, e.g open canopies. The product is available with two powder coated die-cast aluminum trim styles, namely baffled and flat trim. The trim is removed using a boyonet style twist lock action, meaning that screws are not required to hold the frame into place. The baffled trim protrudes .78" and the flat trim sits flush with the ceiling. This luminaire is suited for interior and exterior lighting. Available in symmetrical narrow, medium, wide and very wide light distribution. Color temperature 2700K, 3000K and 4000K. A rough in ceiling tray can be provided as an option for ceilings taht are not strong enough to support the weight of the fixture.

Model#: UAUG-300XX A range of decorative square indirect wall mounted luminaires with hidden LEDs and optics that provides decorative and functional wall illumination. Ideally suited to illuminate the wall and surfaces, as well as provide light accents on vertical surfaces. This luminaire can be mounted in a horizontal or vertical position to provide a specific visual element to the building. The Augusta is suitable for indoor and outdoor applications and provides a clean and visually appealing solution for wall mounted luminaires. This surface mounted luminaire is available in 3 different sizes, as well as bollard combinations. The Augusta 1 meets ADA compliancy. All Ligman fixtures can be manufactured using a special pre-treatment and coating process that ensures the fixture can be installed in natatoriums as well as environments with high concentrations of chlorine or salt and still maintain the 5 year warranty. For this natatorium rated process please specify NAT in options.

Model#: UKWH-300XX A slim shaped wall light with a variety of different distributions to suit all lighting designer’s requirements. This luminaire has been designed to provide excellent light distribution patterns using a low wattage LED package. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy. The KWH can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. These fixtures are adjustable, and can also be aimed as floodlights to provide focus lighting in specific areas, as well as facade lighting. This luminaire is suitable for most applications and complies to dark sky requirements when mounted in the horizontal position. Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option. Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install wireless lighting controls to integrate with building management systems. (WATT-ADJ) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: UDE-200XX New adjustable architectural linear housings and high performance type II, III, & IV optics give the Denver series greater flexibility for designers to specify single, double, two step, and three step luminaires with 360 degree aiming on a 4.5" round pole. Available in 2700k, 3000k and 4000k color temperatures and >80CRI LEDs this pole. Available in 2700k, 3000k and 4000k color temperatures and >80CRI LEDs this Dark Sky rated fixture is perfectly suited for use in pedestrian, streetscapes, plazas and area/parking lots. The fixture is manufactured with a low copper content corrosion resistant die-cast aluminum construction for durable performance. Non aging silicone gaskets, IK rated clear tempered glass lens and standard 10kv surge protection add peace of mind to this product. The luminaire is treated with a chemical nickel and zinc phosphate protection before powder coating (4.7 mil thickness), ensuring high corrosion resistance. Integral control gear and 316 stainless hardware. The pole is provided complete with anchor bolts and anchor bolt covers. Ligman leads again with the Light Linear Denver series ... the answer for boring.

Model#: UTA-20XXX Suitable for wet locations Tango post top luminaire was developed to complement the Tango and Jet range of wall mount luminaires as well as the Jet square bollards, using energy saving compact fluorescent, metal halide and high pressure sodium lamps. This rectangular profiled luminaire mounted on a square aluminum pole is available with different reflectors, downward light beam distributions and lamp options. Designed for residential and shopping areas, squares and parks. Available with a selection of integral electronic ballasts. The LED luminaires have features such as long life, limited maintenance and constant lifetime performance. Dark sky compliant Low copper content die-cast aluminum housing and aluminum bottom frame with integral anti-glare baffles. Stainless steel screws. Durable silicone rubber gasket and clear toughened glass lens. Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Integral control gear. Anodized high purity aluminum reflector.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: ULI-21XXX Light Linear PT is an elegant minimalistic lighting column that is suitable for both modern and classic architecture. Ideal for creating visual guidance with exceptional visual comfort. The dual sealed optical chambers with integrated heat sinks houses a range of field interchangeable optically controlled LEDs, providing Type II, III, IV & V distribution, as well as variations of this for precise light distribution requirements. An example of this, is using a combination of Type II and Type IV distribution optics inside the same fixture. This product range is available in 55w,78w, 110w & 156w options, as a single & double head styles. Customer specific wattages can be provided, contact the factory for more information. This luminaire complies to Dark Sky requirements. The sleek and minimalistic shape provides distinctive lighting effects by night and decorative urban effect during the day. Suitable for use in pedestrian precincts, building surrounds, shopping centers, squares, parks and parking lots. This product range is complemented with high performance optics in the bollard and wall mounted luminaires, to provide a consistent range of design aesthetics for the project. See website for more information. Poles can be provided with GFCI boxes positioned to specific heights specified by the customer. A flat low profile hand hole cover with vandal resistant screws is provided for easy installation. Internal house side shields are available as an option. Available with a selection of integral electronic drivers and dimming electronic drivers as well as a provision to install wireless lighting controls to integrate with building management systems, as well as pole mounted occupancy sensors. Easy access to luminaire for maintenance.

Model#: ULD-200XX A range of square outdoor IP66 floodlight projectors that meets both aesthetic and functional applications. This glare free luminaire is available in Narrow 10° beam, Medium 19°, Wide 33°, Very Wide 71° and Elliptical 41°x14° beam patterns. This luminaire is engineered to meet harsh outdoor environments, as well as being able to be used as a decorative indoor product. The Lador is provided with an integral driver and has accessories that include; dichroic color filters, linear spread lens, honeycomb louvres and anti-glare visors. This floodlight also has a unique aiming and locking system for precise mounting and beam aiming.The Lador product family consists of; floodlights, wall sconces, ceiling mounted squares and cluster column event poles. This luminaire is available with a natatorium rated coating.

Model#: UFUN-500XX A high powered compact surface mounted LED underwater projector for lighting small ponds, waterfalls and water jets. The floodlight must be submerged when operating. Stainless steel grade 316 body, stainless steel screws. Cable entry PG.11 cable gland supplied with 7ft of outdoor submersible #18/3 SOOW 600v power cable. Durable high temperature memory retentive silicon gasket and clear tempered vandal resistant glass. Remote 24v constant voltage driver required to be installed by others. Driver output voltage to be determined depending on quantity of luminaires connected in parallel. Color temperature 2700K, 3000K, 3500K and 4000K, LED CRI >80 and life time 50,000 Hours. A variety of beam spreads are available to suit the application requirements. This luminaire is constant voltage and needs connecting in parallel. This product is not available in Canada

Model#: UTA-80XXX, UTA-804XX, UTA-800XX, UTA-801XX Suitable for wet locations A range of cylindrical surface mounted exterior downlight luminaires. The luminaires are suitable for indoor and outdoor applications for use in residential, shopping and public areas as surface ceiling downlights. The luminaires have features such as long life, limited maintenance and constant lifetime performance. The luminaire is rated as class I with the high power LED integral driver. Low copper content die-cast aluminium housing with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Stainless steel screws. Power is provided to the luminaire through water tight single cable gland. Durable silicone rubber gasket and clear toughened glass.

Model#: USE-900XX A slim wedge shaped, high pressure die-cast pole mounted area light with a variety of different light distributions to suit all lighting designer's requirements. This luminaire has been designed to provide excellent light distribution patterns using highly efficient LED packages and optics. The result is excellent spacing to mounting height ratios, with a uniform lighting layout that meets code requirements using less energy.The Steamer can be utilized to suit specific light patterns using the asymmetrical type II, III, IV and symmetrical lens optics, as well as variations of these for precise light distribution requirements. An example of this is using a combination of Type II & Type IV distribution optics inside the same fixture. Type V distributions in medium, wide, very wide & extra wide are also available. This luminaire complies to dark sky requirements when mounted in the horizontal position.Designed for lighting private roadways, car parks, exhibition areas, service stations and truck stops. Internal house side shields are available as an option.Available with a selection of integral electronic and dimmable electronic drivers as well as a provision to install occupancy sensors, as well as wireless lighting controls to integrate with building management systems. (WATT-ADJUST) This luminaire is provided with a programmable driver so that specific wattage requirements can be achieved. These settings are done at the factory during assembly.

Model#: ULZ-108XX Suitable for wet locations The innovative reflector technology of the Lightzone bollard guarantees a high degree of efficiency and optimal visual comfort while fulfilling the dark sky criteria. Lightzone has been developed to have excellent controlled downward light eliminating any glare. The Lightzone is available column in a straight or conical shape design with two different heights. Designed for lighting of entrances and residential areas by providing wide spread illumination on driveways, pathways and squares. The LED luminaires have features such as long life, limited maintenance and constant lifetime performance. Dark sky compliant Extruded aluminum body and low copper content die-cast aluminum housing. Stainless steel screws. Durable silicone rubber gasket and clear impact resistant UV stabilized polycarbonate lens. For HID lamp and toughened glass for LED lamp Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Integral ballast and anodized high purity aluminum reflector.

Model#: UCO-X0XXX Columbus is an decorative bollard that is suitable for both modern and classic architecture. Ideal for creating visual guidance with exceptional visual comfort. This product was developed to complement the Columbus range of pillar lights, wall sconces and post tops. This sleek shape provides distinctive lighting effects by night and decorative urban effect during the day. Suitable for pedestrian precincts, building surrounds, shopping centers, squares and parks. The Columbus Bollard comes standard with a unique waterproof internal driver housing compartment that is situated at the top of the pole to stop water and dust from entering the electrical components. This fixture is supplied completely wired with powercord and waterproof gland from the driver enclosure to the base of the bollard ensuring quick trouble-free installation. Custom bollard heights are available, please specify. Color temperature 2700K, 3000K and 4000K. Custom wattages can be provided to suit customer and Title 24 requirements.Security Bollard: The Columbus Bollard is available as a traffic rated security bollard. This optional design includes a 1/4" wall thickness galvanized steel security pole with 2 solid 1" galvanized steel cross support rods that are embedded into concrete. This security bollard provides restraint of vehicular traffic in unauthorized areas. Impact calculations shows this bollard will stop a 5,500lb vehicle, travelling at 30mph. For additional strength, the galvanized pole can be filled with concrete up to the waterproof driver housing to provide a solid concrete barrier.

Model#: UAA-20XXX Suitable for wet locations A post top luminaire with a medium size shade decorative lantern and symmetrical light distribution and shepherds crook arm using energy saving compact fluorescent lamps as well as metal halide and high pressure sodium lamps. Developed to compliment the Atlantic sheppard's crook wall light, Atlantic bollard and Atlantic pillar light. Designed for lighting car parks, footpaths, pedestrian areas, precincts, parks, gardens and building perimeters. The LED luminaires have features such as long life, limited maintenance and constant lifetime performance. Low copper content die-cast aluminium housing with high corrosion resistance. Stainless steel screws. Durable silicone rubber gasket and opal glass diffuser. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Integral control gear.

Model#: UBE-20011 A stylish Dark Sky Compliant round high performance light column with downward light distribution using LED lamps. This light column offers optimal visual comfort through glare control by utilizing a controlled optics designed by Ligman. These light columns have a round design providing a unique wide light distribution, offering an architecturally appealing clover leaf pattern on the paving. The internal sides of the supporting pillars are accented by light from the LED. Color temperature 2700K, 3000K and 4000K. The minimalistic shape provides distinctive lighting effects by night and decorative urban effect during the day. Suitable for pedestrian areas, precincts, building surrounds, shopping centers, squares and parks. The Benton Light Column comes standard with a unique waterproof internal driver housing compartment that is situated at the top of the pole to stop water and dust from entering the electrical components. This fixture is supplied completely wired with power cord and waterproof gland from the driver enclosure to the base of the column to ensure quick trouble-free installation. Custom column heights are available, please specify. Provided with anchor bolts

Model#: UGI-31XXX A range of small, square and rectangular wall mounted luminaires with options of upward or downward light distributions. Ideally suited to illuminate the wall and surfaces in front of wall and for light accents on vertical surfaces using high efficiency LED's. The Gino is suitable for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive wall mounted luminaires. This luminaire is available in 2 different sizes and in combinations of down, up or up/down light distributions. The Gino 1 and Gino 2 have a decorative spike option for added lighting effects. The Gino 1 and 2 mounts over a 3" octagonal junction box, a 4" j-box cover plate is available upon request. Frosted or clear lenses are available.

Model#: UEC-40XXX A range of square wall recessed luminaires, with a glare free cut-off reflector system. Suitable for indoor and outdoor applications for pathways and ramps. The linear spread lens provides a wide beam spread taht evenly illuminates up to 26ft of pathway. This luminaire is provided with a powdercoated high pressure die-cast aluminum back box and can be pre shipped to the jobsite for concrete pour or masonry applications. The ECO range has a matching bollard offering to complement the recessed product. Complies with ADA requirements.

Model#: UVI-40XXX A range of round and square wall recessed luminaires. Suitable for indoor or outdoor applications for use in residential, pedestrian areas, and shopping malls, as a decorative wall guide light. The luminaires are provided with an integral 120-277v driver. Remote drivers can be provided. The standard luminaire configuration is non dimmable, however dimming can be provided by utilizing a remote mounted driver. Please contact the factory for more information. Galvanized concrete recessing box included. This fixture is suitable for concrete pour applications.

Model#: ULB-404XX A range of square recessed wall luminaires, with an indirect optical system, offering high vandal resistance. Suitable for indoor or outdoor applications for use in shopping malls and pedestrian areas as a decorative wall guide light. Main characteristics are low glare and the limited maintenance concept. The luminaires use a high quality SMD (LED's) source with low energy consumption and long service life 60,000-80,000 Hrs. Fixture is secured to the recessing box using a hidden screw that provides vandal resistant fixture installation. A remote driver is provided as a standard for outdoor applications. Contractor to provide remote mount waterproof box. This fixture can be provided with a Ligman waterproof box, selected below in options. As an option, this product can be provided with an integrated driver in the galvanized recessing box, however this is for use in indoor/dry locations only. Galvanized recessing box supplied standard. Available in turtle friendly amber and white 2700K, 3000K and 4000K. Note : The LBX black and dark grey paint finish are not recommended due to low light output. This fixture is suitable for concrete pour applications.

Model#: UJE-80XXX, UJE-800XX, UJE-801XX Suitable for wet locations A range of cylindrical and square shape surface mounted exterior downlight luminaires. The luminaires are suitable for indoor and outdoor applications for use in residential, shopping and public areas as surface ceiling downlights. The luminaires have features such as long life, limited maintenance and constant lifetime performance. The luminaire is rated as class I with the high power LED integral driver. Low copper content die-cast aluminium housing with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Stainless steel screws. Power is provided to the luminaire through water tight single cable gland. Durable silicone rubber gasket and clear toughened glass.

Model#: ULW-108XX The innovative reflector technology of the Lightwave bollard guarantees a high degree of efficiency and optimal visual comfort. Lightwave has been developed to have excellent controlled downward light providing wide spacing ratios. The Lightwave is available in a straight or tapered shape design with two different heights. The Lightwave bollard comes standard with a unique waterproof internal driver housing compartment that is situated at the top of the pole to stop water and dust from entering the electrical components. This fixture is supplied completely wired with powercord and waterproof gland from the driver enclosure to the base of the bollard ensuring quick trouble-free installation. Custom bollard heights are available, please specify. Color temperature 2700, 3000 and 4000 Kelvin. Custom wattages can be provided to suit customer and Title 24 requirements.  Security Bollard The Lightwave 2 bollard is available as a traffic rated security bollard. This optional design includes a 1/4" thick wall galvanized steel security pole with 2 solid 1" galvanized steel cross support rods that are embedded into concrete. This security bollard provides restraint of vehicular traffic in unauthorized areas. Impact studies show that this bollard will stop a 5,500lb vehicle that is travelling at 30mph. For added strength, the galvanized pole can be filled with concrete up to the waterproof driver housing to provide a solid concrete barrier.

Model#: ULI-212XX The Light Linear PT range of contemporary outdoor lighting fixtures utilizes an industry leading LED light module to provide high performance with multiple low glare lighting distributions for all design requirements. This product is designed not only to be aestetically pleasing, but to also be an economic alternative to conventional HPS or Metal Halide sources. Industry leading optical technology ensures that only the targeted areas are illuminated, reducing unwanted light trespass and uplight. The Light Linear PT family complies with Dark Sky requirements.  Additionally, the Light Linear PT ffering is available in post top, bollard and wall mount versions that provides designers with four matching families of products to ensure design uniformity throughout the project. The Light Linear series is designed with a rectangular, minimalistic look that is sleek and modern. High corrosion resistant poles are coated with a UV stabilized polyester powder coat that is applied after undergoing a two-stage zinc & nickel phosphate coating process. A durable injected molded silicone gasket, clear tempered vandal resistant glass lens with decorative trim and 316 stainless steel hardware is used to ensure ruggedness while maintaining a modern classic outlook without compromising performance and reliability.

Model#: UQA-210XX Quantum small size LED cluster projectors on light column. The high pressure die-cast housings have integrated heat sinks, as well as a internal waterproof control gear housing compartment. The mounting arm is attached to a ratcheting tilting adjustment that is lockable once the desired aiming position has been achieved. The floodlights can be aimed in different directions to highlight specific features or elements in the environment, as well as provide security when illuminating dark areas on campuses and parks. The luminaires are available with RGBW or static white light. This fixture has been designed around powerful high performance LEDs and precision optics so that the luminaire can be used to illuminate various applications like parks and recreational areas, building facades, high multi-story surfaces and accents. The luminaire is provided with an integral driver and is available in Narrow, Medium, Wide and Elliptical light distributions. RGBW full color LED integration and static white with color temperatures of 2700K, 3000K and 4000K. Cable gland entries on luminaire. Stainless steel fasteners in grade 316. Optional louvers or visors are available upon request. Consult factory for available configurations. As a standard product this is offered in a 3 or 6 fixture configuration, however the fixture quantities, positions, watts & beam spread can be manufactured to suit designer's specifications. The Quantum Cluster adds to Ligman's comprehensive range of event pole cluster luminaires with different floodlight shapes, styles and wattages.

Model#: UBE-10001 A stylish Dark Sky Compliant round high performance bollard with downward light distribution using LED lamps. This bollard offers optimal visual comfort through glare control by utilizing a controlled optics designed by Ligman. These bollards have a round design providing a unique wide light distribution, offering an architecturally appealing clover leaf pattern on the paving. The internal sides of the supporting pillars are accented by light from the LED. Color temperature 2700K, 3000K and 4000K. The minimalistic shape provides distinctive lighting effects by night and decorative urban effect during the day. Suitable for pedestrian areas, precincts, building surrounds, shopping centers, squares and parks. The Benton Bollard comes standard with a unique waterproof internal driver housing compartment that is situated at the top of the pole to stop water and dust from entering the electrical components. This fixture is supplied completely wired with power cord and waterproof gland from the driver enclosure to the base of the column to ensure quick trouble-free installation. Custom bollard heights are available, please specify. Provided with anchor bolts

Model#: UOD-50XXX The Odessa family of floodlights have a modern aesthetic design and are a perfect lighting solution for most small to medium size spotlights and floodlight requirements. The floodlights can be aimed and locked in place to highlight specific features or elements in the environment, as well as provide secuirty when illuminating dark areas on campuses and parks. This small and medium range of high performance LED floodlight luminaires provides a robust design for demanding applications such as recreational areas, public spaces and architectural structures. The luminaire has integrated heat sinks to facilitate LED cooling, as well as an integral driver. The Odessa is available in narrow, medium, wide and very wide light distributions. Color temperatures include 2700, 3000 and 4000 Kelvin. Luminaire has optional accessories, such as ground spike, visors, louvres, and linear spread lenses. For non standar fixture variations, as well as specific reflector requirements and dichroic filters, please contact the factory.?The Odessa floodight is also available as an event pole, see the Odessa Cluster, as well as in a surface mount cluster configuration, see the Odessa Surface Cluster.

Model#: ULI-30001X Light Linear PT wall light is an elegant wall mount fixture suitable for both modern and classic architecture. Ideal for creating visual guidance, with exceptional visual comfort. The dual sealed optical chamber with integrated heat sinks houses a range of field interchangeable optically controlled LED's, providing Type II, III, IV & V distribution, as well as variations of this for precise light distribution requirements. An example of this, is using a combination of Type II and Type IV distribution optics inside the same fixture. This fixture is uinique as it has a IP68 driver housing container that is housed within the IP65 rated light fixture. It is available in 28w and 55w options. This luminaire complies to Dark Sky requirements. This product range is complemented with high performance optics in the bollard and streetlight luminaires, to provide a consistent range of design aesthetics for any project.

Model#: USA-3XXXX   A range of small and large circular wall mounted bulkheads with a vandal resistant UV stabilized polycarbonate diffuser. Ideal for numerous indoor or outdoor applications. Sandy has a subtle chamfered frame and it can be given a more striking appearance by way of different grill and visor options. As with all wall mounted luminaires, these fixtures are provided with a special self-healing waterproof cable gland that prevents water entering the fixture after wiring. This fixture can be provided with an integral self diagnosing emergency battery pack.

Model#: UFOR-200XX A decorative range of post top luminaires, designed to complement the Forrey pendant, bollard and wall mount with options of having no lens or a high impact UV stabilized opal lens. This decorative lantern provides a symmetrical light distribution using high output COB LED. Color temperature 2700K, 3000K, 3500K and 4000K, LED CRI >80 and life time 50,000 Hours. High pressure die-cast marine grade LM6 aluminum body that is pre-treated with a nickel and zinc phosphate and then powder coated with a 4.9mil thick paint finish ensuring high corrosion resistance. Marine grade 316 stainless steel fasteners. Durable memory retentive silicone rubber gasket and clear high impact naturally UV stabilized acrylic lens. Anodized high purity aluminum reflector. This luminaire is provided prewired with power cord to the handhole to simplify installation.

Model#: ULA-600XX  Light Linear LA inground families are provided in RGBW color changing and static white color formats for wall grazing, wall washing, column lighting and uplight applications. Luminaires are suitable for many applications including commercial, historic, or modern architectural interiors and exteriors. Two different lengths are provided allowing the luminaire installation to be tailored exactly to the architectural structure. The luminaire is provided with an integral driver. A remote driver can be provided, please contact the factory for more details. The Light Linear LA 1 is available in 2700K, 3000K and 4000K. LED CRI >80 A low copper content high pressure die-cast and extruded aluminum body with high corrosion resistance. Power is provided through a single watertight cable gland. Two cable glands are available upon request for thru wiring. Stainless steel 316 mounting hardware. Durable high-temperature silicone gasket and clear tempered 8mm thick glass with a walk over rating of 1,102lb maximum load. The luminaire is available in 2 lengths with a standard stainless steel marine grade 316 frame. The luminaire is treated with a chemical nickel and zinc phosphate protection before powder coating (4.7 mil thickness), ensuring high corrosion resistance.