Line Card
160 manufacturers · 18,987 products
Search
Product TypeAll types▾
803 products
BrandAll▾
SortRelevance▾
The BAE is a maximum security, prison grade, surface mount luminaire. The BAE can be both ceiling- or wall-mounted. Engineered with a low-profile clamshell housing, while utilizing inner/outer lenses and tamper resistant fasteners for impact resistance and penetration, and to prevent contraband concealment. UL/ cUL listed for damp locations. The BAE is ideal for correctional and high abuse applications, such as inmate cells, psychiatric wards, secure corridors and general population areas. Available with knockouts for continuous runs (option BAECR).
The MEE series is a combination of both ambient and exam light for hospitals, nursing homes and other patient care facilities. The MEE is an ICrated specification-grade luminaire which provides a cost-effective LED patient room lighting solution. Eliminates the need for wall mounted luminaires. Available in 2'x2' and 2'x4' options, the MEE is the perfect healthcare solution for For use in insulated ceilings.
The CLE is a surface mount IC-rated luminaire that provides a costeffective LED clean room lighting solution. Gasketed housing and door frame create a sealed enclosure. The CLE is available in 1x4, 2x2, and 2x4 sizes. Available options such as anti-microbial paint, and wet location. MILSTD 461G available, NSF listed, Red and Green LED option available. Suitable for biosafety labs rated BSL 1 and 2. Suitable for Class 1/ISO 3 Cleanrooms. For use in wet locations (optional), insulated ceilings. NSF/ANSI 2 Food Zone, Splash Zone and Non-Food Zone Applications.
The BAS LED combines maximum security construction with energy saving technology. The BAS is ideal for confinement/security applications. This surface mount luminaire is perfect for applications such as inmate cells, psychiatric wards, secure corridors and general population areas. UL listed for damp locations.
The fully enclosed MEC offers ambient and/or examination lighting, dimmable to the appropriate lighting levels for either occasions. The small aperture MEC is flush to the ceiling line, allowing quick, easy, as well as effective wipe-down. Separately switched ambient and exam functions provide the ability to accommodate the many necessary activities performed in the patient room. Specify the nightlight as an option for an additional function. Typically used in pairs, and positioned along both sides of the bed, the MEC offers glare and shadow free illumination. Specify the LED reading and/or chart light for an additional function in the patient room.
The MET provides a supplemental lighting solution for Behavioral Healthcare facilities. MET is available in 1x4, 2x2, and 2x4 sizes. Driven by performance and a clean aesthetic, the MET is constructed from premium materials with industry leading technology.
The CLPIMP is ideal for biomedical labs, food processing/testing centers, pharmaceutical labs, government facilities, schools and public areas. The CLPIMP is a top access clean room recessed luminaire for IMP ceilings. 625lb load tested to reduce the hazard of foot traffic. One piece overlapping door provides easy cleaning and air-tight integrity of luminaire. Food Zone/Non-Contact listing, ideal for food processing applications.
The CLF is a low-profile, architecturally designed wall-mounted luminaire built to meet the demands of today's clean room facilities. The CLF provides optimal ambient light with due to its specially designed optics. The CLF LED is designed for use in healthcare facilities, specially for use in patient rooms to facilitate all tasks required by both patient and medical professional.
The LSBF is an LED strip with a flat profile that is available in 4’ or 8' body lengths. It is designed for surface or suspended mounting applications. The LSBF utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.
The BAR was designed to be a vandal resistant surface mount luminaire, with prison grade durability. Engineered with a one-piece design, the BAR brings an additional level of security to prison grade fixtures.
The BAG (up/down) and BAGDL (down only) wall or ceiling fixture combines security features along with diminutive size. Less than 4” deep, a back-pan combined with a one-piece housing maximizes impact resistance and prevents unwanted fixture penetration. Suited for schools, mental health facilities, stairwells, corridors, detention centers, and public transportation areas
MEP offers both Reading and ambient lighting in a beautifully designed fixture. The MEP features innovative optical technology which provides powerful, focused illumination for examinations. Its exemplary design directs the light onto the bed and provides glare-free illumination for both the medical professional and patient. This ergonomical styled design helps bring a relaxed, comfortable feel to any patient room.
The BAF combines maximum security construction features with energy saving technology. UL listed for damp locations; optional wet location under covered ceiling. This surface mounted luminaire utilizes a one-piece housing, security lensing and tamper-resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. The BAF is ideal for confinement/security applications. Suitable for use in inmate cells, psychiatric wards, secure corridors and general population areas.
Discover the Classic collection, offering LED mirrors that blend a seamless design with American craftsmanship. Ideal for versatile bathroom or vanity settings.
Two side edge lighted vanity mirror offered in multiple sizes, color temperatures, and light outputs. Light provides an indirect backglow. The mirror dims with an electronic low voltage dimmer. An optional anti-fog demister is also available.
Two side inset lighted vanity mirror offered in multiple sizes, color temperatures, and light outputs. Choose between a direct or both a direct & indirect light source. The fixture dims with an electronic low voltage dimmer. An optional anti-fog demister is also available.
Full frame edge lighted vanity mirror offered in multiple sizes, color temperatures, and light outputs. Light provides an indirect backglow. The mirror dimmable with an electronic low voltage dimmer. An optional anti-fog demister is also available.
At Matrix Mirrors, we construct our mirrors with high-quality materials and craftsmanship, ensuring that they meet the highest standards of quality and durability. All mirrors are built with built-in diffusion, which helps to distribute the light evenly across the surface of the mirror, providing a bright and even illumination. This diffusion also helps to reduce glare and hot spots, making the mirror more comfortable to use.
Classic Full Frame Edge Indirect (L02I)
Two side inset frost with direct illumination for task lighting.
Future F03 Direct and Indirect, frameless design with radius corners and dual side inset frost (long sides), features two separate light sources for direct and indirect lighting that can be switched separately, suitable for residential and commercial applications. Available in any custom size. Made in the USA.
Round full frame edge frost with indirect illumination for general lighting and ambiance.
Double Long Side Edge (L04) Indirect (I) Vertical Mounting (1)
The LGA-1 Surface Mount fixture features our innovative Point Source Louver (PSL) design that utilizes high-efficiency 90+ CRI chips for precise light management while exceeding the Well Building standard for glare reduction. With an impressive light output of up to 159 lm/W, this fixture offers specified lumen outputs (SLO) ranging from 131 to 1179 lumens per foot. Its minimalistic 1.5” aperture and low-profile design enhance its aesthetic appeal, while the toolless latch system and Quick-Click 5-Wire setup ensure simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.
Laguna 1 Suspended delivers refined architectural lighting with advanced optical performance, featuring a minimalist 1.5" aperture and low-profile form. The Point Source Louver (PSL) optics provide a deeper louver and “extra quiet” visual experience. Engineered to meet or exceed WELL Building standards for glare control, it combines aesthetics with comfort. The fixture offers a readily accessible integral driver and a unique slider optic removal system for effortless installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White come standard. Proudly crafted in Huntington Beach, CA and BABA compliant in most configurations.
The LGADU-1P Direct/Indirect Suspended fixture features innovative Point Source Louver (PSL) design that utilizes high-efficiency 90+ CRI chips for precise light management, exceeding the Well Building standard for glare reduction. With a Brilliant by Design™ philosophy, this fixture combines a minimalistic aesthetic with advanced louvered optic solution. It delivers exceptional light output of up to 159 lm/W, with specified lumen outputs (SLO) ranging from 131-1179 lumens per foot. The minimalistic 1.5” aperture and low-profile design enhance its sleek appearance, while the innovative slider optic removal system ensures easy installation and serviceability. The fixture is available in individual lengths and seamless continuous runs, and it incorporates a toolless latch system and Quick-Click 5-Wire setup for simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.
The LGA-1R-LP Recessed LoPro delivers refined visual comfort and superior performance with Point Source Louver (PSL) optics. PSL offers an 80° deeper louver for an “extra quiet” visual experience—both designed to meet or exceed WELL Building glare standards. This low-profile fixture features a minimalist 1.5" aperture and supports a variety of ceiling integration options, including Trim Flange, Spackle Flange, multiple Grid Lay-in and Tegular systems, Bolt Slot, and Armstrong Interlude/USG Identitee. An innovative slider optic removal system ensures easy installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. Specified Lumen Outputs (SLO) available. Proudly crafted in Huntington Beach, CA and BABA approved in most configurations.
The HTG-1PR-LP LoPro Flush Perimeter fixture offers versatile mounting options with Trimless, Trim Flange, and T-Grid flush configurations. Engineered for low-profile installations, it fits within a slim 2.85"–3.05" depth behind the ceiling, ideal for low-plenum spaces. Designed with uncompromised performance, it provides exceptional glare control with options for diffused (Lambertian) or room-fill optics. With a minimalistic 1.5” aperture and specified lumen outputs (SLO) from 224 lm/ft to 1754 lm/ft, the fixture is available in individual lengths or continuous runs up to 300 feet with no lens breaks. Accessibility is simplified with a patented, toolless “Push to Eject” system, along with a Toolless Latch System and Quick-Click 5-Wire setup for fast, seamless installation. Each fixture is proudly crafted in Huntington Beach, CA, USA.
The HTG-3PR-LP LoPro Flush Perimeter fixture is available in versatile mounting options, including Trimless, Trim Flange, and T-Grid configurations. Designed for low-plenum installations, it features a low-profile depth of 2.85”–3.05” (integral driver). The fixture offers advanced optics with options for glare control, diffused (Lambertian), or room fill optics, ensuring optimal lighting performance. With specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft, it boasts a minimalistic 3” aperture and can be configured in individual lengths or seamless continuous runs up to 300 feet without lens breaks. Accessibility for drivers, wiring, and serviceability is streamlined through a patented toolless “Push to Eject” system, while the toolless latch system and Quick-Click 5-Wire setup enable simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.
The HTG-3PR Regress Perimeter fixture features versatile mounting options, including Trimless, Trim Flange, and T-Grid regressed configurations, making it suitable for a variety of applications. It accommodates multi-depth ceiling options for most plenum installations, with a 1.75” regress requiring a depth of 5.75”–6.13” (integral driver) and a 3” regress needing 7”–7.38” (remote driver). Designed for optimal performance optics. The fixture boasts a minimalistic 3” aperture and specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft. Available in individual lengths or seamless continuous runs up to 300 feet with no lens breaks, the HTG-3PR ensures easy accessibility for drivers, wiring, and serviceability from below the ceiling, thanks to its patented toolless “Push to Eject” system. Additionally, the toolless latch system and Quick-Click 5-Wire setup facilitate simple and quick installation. Proudly crafted in Huntington Beach, CA, USA.
The HTG-1P Suspended fixture combines sleek architectural design with high-performance lighting, made possible by innovative Microstructure EdgeTech Optics™. Offering seamless illumination and uniformity, it supports a range of optical distributions including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, Room Fill, and Ceiling Wash. With a minimal 1.5" aperture and ultra-low profile, the HTG-1P delivers clean lines and uninterrupted rows up to 250 feet—free of lens breaks, pixelation, or hot spots. Installation is fast and tool-free with the patented “Push to Eject” system. Direct or Indirect orientations are available, along with versatile mounting options: standard aircraft cable or 361° locking rotational aircraft cable. Choose between integral or remote driver configurations, all with concealed hardware for a polished finish. Available with Specified Lumen Outputs (SLO) up to 1480 lm/ft and standard 90+ CRI with optional Tunable White. Custom powder coat finishes are also offered to suit any design vision.
The HTG-3P is a 3-inch suspended linear fixture with Microstructure EdgeTech Optics™ for precise control and seamless, uniform illumination. It supports Batwing, Glare Control, Diffused, Wall Wash, and Ceiling Wash optics, with a low-profile depth of 1.38 to 3.4 inches. Designed to match the HTGDU-3P for architectural consistency, it offers continuous runs up to 250 feet, toolless “Push to Eject” access, and aircraft cable or 361° locking mounting. Available with multiple driver options, custom finishes, and SLO up to 1754 lm/ft. Proudly made in Huntington Beach, CA and BABA compliant.
The HTG-3R-LP delivers high-output performance and architectural elegance in a low-profile design, ideal for any plenum-restricted installation. With depths ranging from 1.5"–1.75" (remote driver) or 2.14"–2.45" (integral driver), it features a sleek 3" aperture and supports Batwing, Glare Control, Diffused (Lambertian), or Wall Wash optics. Offering Specified Lumen Outputs (SLO) from 224 to 1754 lm/ft, the fixture supports seamless runs up to 250 feet with no lens breaks and up to 16’ on-center spacing at 35fc. All components—including drivers and wiring—are accessible from below the ceiling via the patented toolless “Push to Eject” system. Fast, clean installation is ensured with the Toolless Latch and Quick-Click 5 Wire system. Compatible with multiple ceiling types, including Trim and Spackle Flange, Grid Lay-in and Tegular (15/16” or 9/16”), Bolt Slot, Armstrong Interlude/USG Identitee, and 4” TechZone™ for seamless integration. Proudly crafted in Huntington Beach, CA – USA
Engineered for plenum-constrained spaces, the HTG-1R-LP Recessed LoPro delivers high-performance illumination with an ultra-slim profile—just 1.5" to 1.75" deep with remote driver, and 2.14" to 2.45" with integral driver. Featuring a minimalistic 1.5" aperture, it supports Batwing, Glare Control, Diffused (Lambertian), or Wall Wash optics for tailored performance without design compromise. Achieve seamless continuous runs up to 250 feet, with uniform light and no lens breaks. Delivering up to 1480 lm/ft with 90+ CRI and optional Tunable White, the fixture enables up to 16' on-center spacing at 35fc. Installation and maintenance are simplified with the patented toolless “Push to Eject” system, Toolless Latch System, and Quick-Click 5 Wire connection. Compatible with a wide range of ceiling types including Trim Flange, Spackle Flange, 15/16” or 9/16” Grid Lay-in and Tegular, Bolt Slot, or Armstrong Interlude/USG. BABA/BABAA compliant in most configurations – contact factory for details.
The HTGDU-1W Arm Mount delivers precision illumination through advanced Microstructure EdgeTech Optics™ and individually controlled direct and indirect MEO™ optics. Its minimalist 1.5" aperture and ultra-low profile support PRO optic options—including Ceiling Wash, Wall Wash, and Diffused (Lambertian)—with Narrow Distribution available for wall wash applications. Engineered for versatility, it features 361° locking rotational arm hubs with beautifully machined end caps and matching hardware, plus an innovative, toolless “Push to Eject” system for effortless installation and service. Custom powder coat finishes and Specified Lumen Outputs (SLO) up to 1480 lm/ft. are available, with 90+ CRI standard and Tunable White optional. Proudly crafted in Huntington Beach, CA, and BABA compliant in most configurations.
The HTG-3P-PDS delivers high-performance lighting with clean aesthetics, featuring Microstructure EdgeTech Optics™ for precise control, seamless illumination, and uniform output. This 3" aperture fixture utilizes a minimalist 1/8" suspension cord, available in silver or white with chrome-plated connectors—carrying both positive and negative wires for streamlined installation. Suspension lengths extend up to 10 feet from canopy to fixture. Designed for both direct and indirect configurations, the ultra-low-profile form supports individual lengths and continuous runs up to 250 feet with no lens breaks or visual hotspots. Choose from a wide range of optics including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, Room Fill, or Ceiling Wash. Additional features include a toolless “Push to Eject” system, custom powder coat finishes, SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White. Proudly manufactured in Huntington Beach, CA and BABA compliant in most configurations.
The HTG-1 Surface combines sleek design with advanced performance, featuring Microstructure EdgeTech Optics™ for precise light control, seamless illumination, and superior uniformity. With a minimalist 1.5" aperture and ultra-low profile, it offers flexible optic options including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, and Room Fill. Available in individual lengths or seamless runs up to 250 feet with no lens breaks or hotspots. Installation is quick and easy with the innovative toolless “Push to Eject” system, and the design features no visible fasteners for a clean aesthetic. Choose from integral or remote drivers, custom powder coat finishes, and SLO outputs up to 1480 lm/ft with 90+ CRI standard. Tunable White available. Proudly made in Huntington Beach, CA and BABA compliant in most configurations.
Designed for direct T-Grid mounting, the HTG-3 Surface T-Grid delivers seamless integration and high-performance illumination with a minimal 3" aperture and ultra-slim 1.38" depth. Featuring Microstructure EdgeTech Optics™ (MEO™), it offers optic options including Batwing, Glare Control, Diffused (Lambertian), and Wall Wash. Achieve clean, continuous runs up to 250 feet with no lens breaks or hotspots, and design flexibility with mitered lit corners. The innovative toolless “Push to Eject” system and flush T-Grid mounting make installation fast and clean. Supports 16' on-center spacing with Batwing optics and offers SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White options. Available in custom powder coat finishes. Proudly made in Huntington Beach, CA and BABA compliant in most configurations.
Engineered for direct T-Grid mounting, the HTG-1 Surface T-Grid delivers sleek, integrated performance with a minimalist 1.5" aperture and ultra-low profile. Powered by Microstructure EdgeTech Optics™ (MEO™), it offers a variety of precision optics including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, and Room Fill. Designed for visual comfort and performance, it supports outputs from 193 to 1480 lm/ft. Available in 2'–8' lengths or seamless continuous runs up to 250 feet without lens breaks or hotspots. Mitered lit corners align cleanly with T-Grid layouts. Features include a toolless “Push to Eject” system for effortless installation and a flush T-Grid mounting mechanism. Custom powder coat finishes, 90+ CRI, Tunable White, and BABA compliance available. Proudly crafted in Huntington Beach, CA.
Innovative Microstructure EdgeTech Optics delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control or Diffused (Lambertian). • Full 361° locking rotational arm hubs. • MEOTM allows for minimalistic 1.5” Aperture fixtures with extremely low profiles. • Wall Arm Mount with 1” rotational hub. • Optional Ceiling Arm Mount with 1” rotational hub. • Innovative Toolless “Push to Eject” System allows for easy installation and serviceability. • Beautifully machined end caps and matching arm hardware. • Specified Lumen Outputs (SLO) available. • Proudly crafted in Huntington Beach, CA - USA.
The HTG-3W, a 3" Aperture Wall Mount Linear fixture, incorporates innovative Microstructure EdgeTech Optics™ (MEO™) for exceptional optical control, ensuring seamless illumination and uniformity in performance. This sleek fixture offers a minimalistic, low-profile design, made possible by MEO™ technology, and is available in individual lengths or continuous runs up to 300 feet without lens breaks. Installation is simplified with a patented tool-less "Push to Eject" system, allowing for easy serviceability, and the design is free of visible fasteners, delivering a clean, refined aesthetic. Standard finishes include silver anodized, powder-coated white, and powder-coated black, with additional custom anodized and powder-coated RAL options available for a tailored aesthetic. HTG-3W fixture is proudly crafted in Huntington Beach, CA, USA.
The HTG-1P-RD-PDS combines cutting-edge Microstructure EdgeTech Optics™ with a minimalist suspension design for sleek, high-performance lighting. With a discreet 1/8” silver or white cord and chrome-plated connectors, each suspension cable carries both positive and negative conductors and supports drops up to 10 feet. This ultra-low-profile 1.5" aperture fixture delivers seamless, uniform illumination with your choice of Batwing, Glare Control, Diffused (Lambertian), Wall Wash, Room Fill, or Ceiling Wash optics. Available in direct or indirect configurations, with individual lengths or continuous runs up to 250 feet—free from lens breaks or pixelation. Installation is quick and easy with the toolless “Push to Eject” system. Features include custom powder coat finishes, SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White. Proudly made in Huntington Beach, CA and BABA compliant in most configurations.
The HTGDU-3W is a 3-inch direct/indirect rotational arm mount fixture featuring Microstructure EdgeTech Optics™ for superior optic control and seamless illumination. With full 361° locking rotational hubs, individually controlled direct and indirect outputs, and minimalist MEO™ design, it offers flexible performance and clean aesthetics. Includes toolless “Push to Eject” access, integral or remote driver options, precision-machined components, and SLO up to 1480 lm/ft. 90+ CRI standard with Tunable White available. Proudly made in Huntington Beach, CA and BABA compliant.
Innovative Microstructure EdgeTech Optics™ delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control, Diffused (Lambertian) Optics. MEO™ allows for minimalistic 3” Aperture fixtures with extremely low profiles. Individual fixture lengths and seamless continuous rows with no lens breaks up to 400 feet. Innovative Toolless “Push to Eject” system allows for easy installation and serviceability. No visible fasteners Custom powder coat and anodized finishes Specified Lumen Outputs (SLO) available Proudly crafted in Huntington Beach, CA – USA.
Innovative Microstructure EdgeTech Optics™ delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control or Diffused Optics. MEO™ allows for minimalistic 1.5” Aperture fixtures with extremely low profiles. Direct or Indirect illumination. Individual fixture lengths and seamless continuous rows with no lens breaks up to 400 feet. Window mullion mount or over doorways Remote and Integral Driver options Mullion mount — Innovative Toolless “Push to Eject” system allows for easy installation and serviceability. No visible fasteners Custom powder coat and anodized finishes Specified Lumen Outputs (SLO) available Proudly crafted in Huntington Beach, CA – USA.
The HTG-1W Rotational Arm Mount combines sleek design with powerful performance, featuring Microstructure EdgeTech Optics™ for precise light control, uniform illumination, and exceptional visual comfort. With a minimalist 1.5" aperture and ultra-low profile, it supports Batwing, Glare Control, or Diffused optics in direct or indirect configurations. Ideal for mounting to window mullions or over doorways, the fixture is available in individual lengths or seamless continuous runs up to 250 feet without lens breaks. The toolless “Push to Eject” system ensures easy installation and serviceability, with no visible fasteners for a clean architectural finish. Offered with remote or integral driver options, custom powder coat and anodized finishes, and specified lumen outputs. Proudly made in Huntington Beach, CA.
The Huntington 3 is a 3" aperture fixture that mounts directly to the T-Grid for seamless performance and integration. • Specify Batwing, Glare Control, Diffused (Lambertian) optics or Wall Wash Optics. • MEOTM allows for minimalistic 3” Aperture fixture while only being 1.38” deep. • High performance with visual comfort (224-1713 lm/ft). • Individual fixture lengths and seamless continuous rows with no lens breaks, pixelation or hotspots up to 400 feet. • Mitered lit corner patterns. • Innovative Toolless “Push to Eject” System allows for easy installation and serviceability. • Innovative T-Grid mounting mechanism for flush T-Grid surface mounting. • 16’ on center spacing with MEOBW (Batwing). • Custom powder coat and anodized finishes. • Specified Lumen Outputs (SLO) available. • Proudly crafted in Huntington Beach, CA - USA.
The HTGDU-3P is a 3-inch direct/indirect suspended fixture featuring Microstructure EdgeTech Optics™ for seamless, uniform illumination with precise optical control. It supports Batwing, Glare Control, Diffused, Wall Wash, Room Fill, and Ceiling Wash optics, with PRO options available. Designed with a 3.4 x 3.4 inch profile to match the HTG-3P, it offers individually controlled direct and indirect outputs, toolless “Push to Eject” installation, and continuous runs up to 250 feet. Mounting options include aircraft cable and 361° locking, with integral, remote, or in-canopy driver configurations. Proudly made in Huntington Beach, CA.
• Innovative Microstructure EdgeTech OpticsTM delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control, Diffused (Lambertion) optics. • MEO allows for minimalistic 3” Aperture fixtures with extremely low profiles. • PRO optics available with Asymmetric, Wide and Narrow distributions. • Individually controlled Direct and Indirect MEO optics and lumen outputs. • Wall Mount or Rotational Arm Mount • Innovative Patent Pending Tool-less “Push to Eject” system alows for easy installation and serviceability. • Individual fixture lengths and seamless continuous rows with no lens breaks, pixilation or hotspots up to 400 feet. • Integral Driver, Remote Driver, In-Canopy Driver and In-Canopy Emergency Driver options. • Specified Lumen Outputs (SLO) available • Proudly crafted in Huntington Beach, CA - USA
The HTGDU-1P features cutting-edge Microstructure EdgeTech Optics™ for unmatched optical control and seamless, uniform illumination. Offering a minimalist 1.5" aperture and ultra-low profile, it supports a range of customizable optics - including Batwing, Glare Control, Diffused, Room Fill, Ceiling Wash, and Wall Wash. Individually controlled direct and indirect MEO™ optics deliver tailored lumen output. Available with custom powder coat finishes, tool-free installation, and flexible mounting options including 361° rotational aircraft cable. Choose from integral, remote, or emergency drivers, with SLO outputs up to 1480 lm/ft. Available as 90+ CRI standard, with Tunable White available. Made in Huntington Beach, CA and BABA compliant in most configurations.