160 manufacturers · 18,987 products

The HALO Outdoor LED Vapor Tight Floodlight provides an indoor/outdoor solution in applications where lighting fixture protection is required. The fixture provides equivalent light output to a 100-watt incandescent and 23-watt CFL fixture, with high-quality long lasting illumination. The fixture is vapor tight protecting against dust and moisture. This fixture’s traditional look and warm color temperature gives consumers the comfort of lighting they are used to. This fixture is ideal for patios, garages, storage, and industrial areas.

The Passive Infrared Single Level Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. The VNW-P-1001-MV uses Passive Infrared (PIR) sensor technology to monitor a room for occupancy and deliver maximum energy savings. The lights are turned ON by pressing the universally recognized light icon pushbutton. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The 0-10V Decorator Dimmer provides full-range classic linear-slide dimming for 0-10 Volt compatible dimmable light sources. These units are ideal for light commercial applications and are compatible with decorator style devices and wallplates. Units feature a preset “ON/OFF” switch that automatically returns controlled light(s) to a preset level without disturbing the brightness level. The device is designed for both Single-pole (one location) and 3-way (multi-location) applications.

The Dual Technology Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. The ONW-D-1001-DMV-N combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

Combining the functionality of a switchpack, a sensor, and a 0-10V dimmer, this convenient wallbox device saves labor costs and reduces installation times. What's more: it meets all the latest energy codes and standards, including Title 24. This model features both ultrasonic (US) and passive infrared (PIR) sensing technologies.

Available in both a network and stand-alone architecture, Room Controller offers code-compliant lighting, emergency, and plug load control out-of-the-box when connected to Room Controller low voltage devices. The system includes three relays and up to three 0-10 VDC dimming outputs to control compatible dimmable ballasts. Network up to 254 ControlKeeper and Room Controller Network panels.

Dual Relay Switchpacks provide 24 VDC operating voltage to all low voltage, 24 VDC, Greengate occupancy sensors and day lighting controllers. These powerpacks can be used where two circuits need to be controlled at the same point. A single switchpack can provide power for up to five sensors. Up to ten switchpacks can be connected to one sensor for control of multiple circuits. Isolated contacts may also be used to control HVAC, contactors, motors, etc.

The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OAC-DT sensors are also equipped with MicroSet self-adjusting technology which provides an adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. MicroSet self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period.

The Passive Infrared Low Voltage Occupancy Sensing Wall/Corner sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. Manual On feature for use with 1 or 2 momentary switches controlling 1 or more Switchpacks.

Instead of pulling line-voltage to low-voltage transformers installed every few feet, bring line voltage to the DLVP power module and pull pre-terminated, low-voltage cable to every fixture, sensor, control, and receptacle control in a space. Available in 2 power levels (300 and 600W), UL924 listed, and pre-assembled, DLVP delivers out-of-the-box, “plug and play” code compliance.

The Passive Infrared Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The OEF-P PIR Fixture Mount High Bay/Low Bay Dimming Occupancy Sensor with Integrated Photocell and Two Interchangeable Lenses provides 1-10V control. The OEF-P is easy to program and set for desired 1-100% continuous dimming levels during daylighting. It is also engineered to meet and exceed all standards requirements of ASHRAE Standard 90.1 2010. Provides robust mechanical latching relay. Relay always returns to close after power loss event. UL listed for electronic ballast loads 120/277V.

The OSW-U-0721-MV is a self contained, energy saving, motion-sensing lighting control which replaces a conventional wall switch and utilizes ultrasonic technology to detect room motion. The sensor produces a low-intensity, inaudible sound to detect occupancy in a room. Changes in the sensor’s acoustic wave caused by motion, such as walking into a room, reaching for a telephone or swiveling in a chair, will cause the lights to turn ON. The sensor does not respond to audible sound. Wall switches are ideal for smaller spaces where you will not have obstructions of line-of-sight due to switch location, room orientation or furniture placement.

Pre-terminated Control Cable, couplers and splitters connect the Room Controller or DLVP power module and devices simplifying the Click & Go connection enabling automatic functionality upon power up. Cables are pre-terminated with industry standard RJ45 connectors.

The OSW-P-1001-MV Passive Infrared Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. In Automatic On Mode, the lights turn ON when a person enters the room. In Manual On Mode, the lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as one of the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with Incandescent, LED, Fluorescent, CFL, MLV, ELV or 1/2 HP motor load.

The 0-10 Volt Slide Dimmer provides full-range classic linear-slide dimming for 0-10V compatible dimmable light sources. These units are ideal for light commercial applications and are compatible with decorator style devices and wallplates. The preset “ON/OFF” switch automatically returns controlled light(s) to a preset level without disturbing the brightness level. The device is designed for both Single-pole (one location) and 3-way (multi-location) applications.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. The ONW-D-1001-MV-N combines Ultrasonic and Passive Infrared (PIR) sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

Listed for emergency lighting control applications, the RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that emergency fixtures illuminate at full brightness during utility power interruptions. Its small size makes it ideal for junction box or integrated fixture mounting in wireless or other modern control systems. An integral test switch allows for quick testing and verification.

Combining the functionality of a switchpack, a sensor, and a 0-10V dimmer, this convenient wallbox device saves labor costs and reduces installation times. What's more: it meets all the latest energy codes and standards, including Title 24.

The MicroSet Ultrasonic Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The ultrasonic sensor uses the Doppler principle. It produces a low intensity, inaudible sound and detects changes in sound waves caused by motion, such as walking into the room, reaching for the telephone, or turning in a chair. They are volumetric in nature and therefore not line-of-sight dependent. Since they fill the space with these sound waves, they are excellent in bathrooms with stalls, enclosed hallways, or other oddly shaped rooms. In addition, they are much more sensitive to smaller motions. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Dual Technology Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-DMV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OAWC-DT sensors are also equipped with MicroSet self-adjusting technology which provides an adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. Self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period. Manual On feature for use with 1 or 2 momentary switches controlling 1 or more Switchpacks.

The Passive Infrared (PIR) Single Relay Vacancy Sensing Wall Switch with Night Light is a lighting control and wall switch all-in-one that is used for energy savings and convenience. VNLW-P-1001-MV-N is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. The night light activates when the sensor turns the lights OFF. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The TSW-MV is ideal for conformance to energy codes where assurance is needed that lights are turned OFF when not in use and an occupancy sensor is not the best application.

The MicroSet Passive Infrared Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. For units to sense motion, the person must cross between two segments. PIR sensors are considered line-of sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Remote Relay Unit (RRU) provides 120 or 277 VAC input voltage configurations. The RRU is designed to force all outputs in the lighting control panel to an emergency scene regardless of the control panel programmed output status. This allows the override of outputs to full bright during loss of normal (grid) power to allow an alternate power source to drive the lighting loads. Once the RRU senses the normal power returning, the control panel will return to the normal programmed operating mode.

The Heavy Duty Switchpack provides 15 VDC operating voltage to all low voltage, 15 VDC, occupancy sensors and daylighting controllers. A single powerpack can provide power for up to five sensors. Up to ten switchpacks can be connected to one sensor for control of multiple circuits. Isolated contacts may also be used to control HVAC, contactors, motors, etc.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-MV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

Cooper Lighting Solution's RRU-X-UNV includes a 20A rated high voltage Form C (N/O+N/C) relay and a low voltage Form A (N/O) relay and is UL924 Listed for emergency lighting control applications.The RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that an emergency fixture illuminates at full brightness during a utility power interruption. Its small size makes it ideal for junction box mounting or integrated fixture mounting in wireless or other modern lighting control systems. An integral test switch and LED allow for quick testing and verification of proper function.

Linear Dimming Control Module Plenum Rated (LDCM-PL) takes a 0-10V dimming signal and converts it to an ELV dimmed output for up to 1000W with a 277V load and 450W on a 120V load. The LDCM-PL is rated to directly mount to a junction box in a plenum space for easier installations and to meet building requirements.

The SP20-RD4 is the latest addition to the Greengate Switchpacks family, delivering a wide array of switching solutions in a single unit. This robust powerpack is designed to deliver unmatched performance. The SP20-RD4 features robust and reliable mechanical latching relays, exclusive fail-safe circuitry, daylight harvesting, bi-level switching and is configurable for energy code requirements. The switchpack is specifically designed to handle high inrush electronic ballast loads and offer unmatched durability and service.

1200VA, 120/277 Volt AC 60Hz, Single-Pole & 3-Way, WBSD-010M-C1 Preset Electro-Mechanical Electronic 0-10VDC Fluorescent Slide Dimmer, 0-10VDC LED Power Supply Dimmer, Suitable for use with Class 1 or Class 2 wiring - White face assembled on device, Ivory and Light Almond color change kits included. The WBSD-010M-C1 can control a load directly or connect to the SP20-RD4 as a manual pushbutton to toggle the load.

The BMS Pro products are feature-rich, high performance protocol translators which allows data exchange between Cooper's (Greengate, WaveLinx Wired and Fifth Light) lighting control systems and the Building Automation Systems and other third party systems using standard based communication protocols. The BMS Pro 2 converts Cooper’s Greengate, WaveLinx Wired and Fifth Light lighting control systems’ protocols to BACnet/IP, BACnet MS/TP, Modbus TCP/IP, Modbus RTU.

The Field Relay provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The Fifth Light Sensor Powerpack provides power to low voltage sensors and communicates occupancy data status to the Fifth Light system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.

Fail-Safe Changing Views Enhanced combines a fully luminous panel with the aesthetic appeal of visual stimulation. Great for use in patient rooms, recovery rooms, or hospital lobbies, the Changing Views Enhanced is the ideal fixture for adding a touch of visual warmth to any environment.

FLR Fully Luminous Recessed luminaire, with a clear bottom lens for added protection, can be used in a variety of medical / cleanroom, wet location, or high abuse applications. Choose from 3 sizes and a host of lumen packages and color temperatures, to perfectly suit your needs

The Circadian LED nightlights bring soft, low-level illumination to any environment. Fitting into a standard junction box (single-gang, handy box, 2-inch minimum inside width) for easy installation, the Circadian Series offers up to 30 lumens of illumination. Specify the thru-wall junction box to use two night lights on opposing sides of the wall with one junction box.

MRI 4" and 6" aperture round downlight, perfect for your MRI suite. Non-ferrous construction, remote drivers and driver enclosures, and MRI filters to complete the job. 4" downlight to 2500 lumens and the 6" downlight delivers up to 4000 lumens. Available 1% dimming, dim to off, and DALI drivers are available. IP65 rated for ingress protection and NSF for easy cleaning and wipe-down

FailSafe ArcMed Sealed InDepth allows for the use of the stylish InDepth luminaire in complex environments such as behavioral health, sterile environments, healthcare, food service/processing/prep, and general wet location environments. Sealed clear bottom lens provides physical protection and also provides dust and water ingress protection.

Designed to bring modern aesthetics to the patient room, the ArcMed APR puts patient experience at the forefront. The one-piece diffuser lens provides a clean look while making the fixture easy to clean, while the internal compartmentalization divides the functions of the fixture into identifiable sections.Now offered with a dimmable relay for integration with nurse call systems, this option allows patients the ability to dim the lights from their bed controller, increasing patient satisfaction.

The ArcMed APN fixture brings "Lines of Light" to the patient room. A one-piece diffuser and internal compartmentalization create a unique look that will elevate aesthetic appeal of the fixture. Positioning fixtures on either side of the bed frees up valuable space above the bed, and increases patient visual comfort. Now offered with a dimmable relay for integration with nurse call systems, this option allows patients the ability to dim the lights from their bed controller, increasing patient satisfaction.

The Fail-Safe FCZ is a sealed, IP65 rated center basket troffer with high performance, visual comfort and aesthetics. Offered in three different sizes, multiple lumen packages, and optional polycarbonate lenses, the FCZ is an excellent choice for a wide range of applications including vandal-resistant, behavioral health, medical, cleanroom, and hose down.

The Fail-Safe FSP is a fully luminous, sealed LED luminaire designed to accomodate shallow plenum spaces. Offered in three different sizes, multiple lumen options, and optional IP hosedown ratings, the FSP is an excellent choice for a wide range of applications including vandal-resistent, behavioral health, medical, and hosedown.

The Fail-Safe MRI-ATR is an architectural troffer specifically designed for MRI rooms in healthcare facilities and medical spaces because of its non-ferrous construction. Available in 1'x4', 2'x2', and 2'x4' sizes, the MRI-ATR has a slim frame design allowing a fully luminous aesthetic with only the illuminated lens being visible. The fixture also has multi-channel MRI filters and a remote driver.

A sealed recessed Encounter luminaire is accomplished by precisely adhering a clear lens to the fixture bottom. Wet location under covered ceiling standard. Choose from a variety of clear lenses - acrylic or polycarbonate. IP66 standard, NSF listed, Class 100 rated (ENC)

The Fail-Safe FCT LED combines maximum security construction features with energy saving technology. This low profile surface mounted luminaire has a clamshell housing, security lensing and tamper-resistant fasteners to maximize impact-resistance and prevent contraband concealment and unauthorized fixture penetration. The fixture can be ceiling or wall-mounted. An emergency battery pack is available as an option. It is UL/CUL listed for damp locations.

6 inch LED recessed downlight designed for operating room applications. Featuring a two-stage reflector with excellent light control and low aperture brightness. Lumen packages up to 7000 lumens with color temperatures of 3000K, 3500K, 4000K, and 5000K. Available with dim-to-warm technology, the 3000K LED warms smoothly as dimmed to 1850K, creating a warm glow within the space. IP66 compliant standard, NSF and MILSTD461G available.

MPR3 LED removes lighting elements from walls incorporating them into a multi-compartment recessed ceiling fixture. Sections provide independent task illumination; patient reading, patient ambient, and medical professional exam.

The Fail-Safe VRVT4 is designed to withstand environmental stress for years to come. VRVT4 is tightly sealed with a closed cell foam in place gasket and is equipped with tamperproof latches standard and impact resistant lenses, as well as optional narrow spectrum color LEDs for vivariums and certain types of specialty materials production. These features allow the VRVT4 to be used in a wide variety of vaportite applications where a standard product would not be sufficient.

FMB Wall LED combines maximum security construction features with energy saving LED technology. One piece clamshell housing, security lensing and tamper-resistant hardware to maximize impact resistance and prevent contraband concealment and unauthorized entry. ETL listed for damp locations.

HDF LED high pressure hose down luminaire withstands water penetration up to 2800 PSI. Stainless steel hardware provides a watertight seal by compressing the 6 3/4"" diameter tube between two fully gasketed end plates. Water-tight connectors ensure the integrity of the seal at the power supply entry. An emergency battery pack is available. UL/cUL listed for wet locations. Ideal for food processing facilities, car & truck washes, high humidity/moisture areas, maintenance facilities, inspection stations, athletic/training facilities.

H12 is a traditional surface mount LED high abuse luminaire perfect for new construction or retro-fit opportunities. Die-cast aluminum back box (shallow, deep version), polycarbonate lens, and tamperproof hardware ensures a tough, robust luminaire that is built to last in the most demanding environments

The Fail-Safe VRVT3 is designed to withstand environmental stress for years to come. VRVT3 is tightly sealed with a closed cell foam in place gasket and is equipped with tamperproof latches standard and impact resistant lenses, as well as optional narrow spectrum color LEDs for vivariums and certain types of specialty materials production. These features allow the VRVT3 to be used in a wide variety of vaportite applications where a standard product would not be sufficient.

The low-profile Fail-Safe FWL, FWLSC and FWLDL are perfect where non-obtrusive confinement / vandal resistant products are required. Combining form and function, the FWL (up/down), FWLSC (sconce), and the FWLDL are perfect for mental health facilities, public transportation areas, psychiatric wards, detention centers, stairwells, corridors and schools

FCC LED combines security construction features with energy savings technology. This corner mount fixture uses a one-piece clamshell housing, security lensing, and tamper-resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. Energy efficient LEDs and standard 0-10V dimming driver make this corner correctional fixture the ideal choice for your next project.

The Fail-Safe MWL Medical Wall LED is an excellent choice for headwall mounted bed lighting. The MWL provides both direct and indirect lighting, with a variety of options for patient control, including pull chains and low voltage relays. Additional optional features, including a Wavelinx Wireless Driver and VividTune White Tuning Technology, allow the fixture to be specified to meet the needs of a wide variety of facilities.

The Fail-Safe VRVT2 is designed to withstand environmental stress for years to come. VRVT2 is tightly sealed with a closed cell foam in place gasket and is equipped with tamperproof latches standard and impact resistant lenses, as well as optional narrow spectrum color LEDs for vivariums and certain types of specialty materials production. These features allow the VRVT2 to be used in a wide variety of vaportite applications where a standard product would not be sufficient.

A recessed center basket fixture that is both stylish and functional. Choose from a variety of decorative inlays, add a functional wipe down door, or specify the wet location option for use in medical, commercial, retail, education, or numerous other applications

This architectural, recessed patient room fixture offers both exam, ambient, and reading lighting in one streamlined, attractive fixture. The MAE LED features innovative optical technology which provides powerful, focused illumination for examinations.