Line Card
160 manufacturers · 18,987 products
Search
Product TypeAll types▾
15,153 products
BrandAll▾
SortRelevance▾
This 8 3/4″ wide, high performance LED cove fixture is made to lay directly into your large cove shelf. The superior, one piece reflector design smoothly illuminates the cove without unsightly shadows between fixtures while projecting light out of the cove and into the space for general illumination.
The HITW LED Series is a unique variety of LED cast GRG (Glass fiber Reinforced Gypsum) fixtures that provide an asymmetric throw of light and integrate into the structure. The GRG castings are available in many sizes from 4×6″ to 8×54″ for the aperture.
LS LED Series low level steplight provides a soft asymmetric wash of light. The indirect optical design shields the LEDs at any viewing angle. Offered in Trimless, Trimmed and Back to Back models.
The HITC LED Series is a unique LED cast GRG (Glass fiber Reinforced Gypsum) down light with round or square apertures that integrate into the structure and become part of the ceiling. It is available in 4-18″ for the aperture opening. Once installed they look like a custom built light niche.
The DL LED Series offers two different looks with a Standard Lens or the Recessed Lens pictured above. The linear downlights may be used alone, as a wall slot or mixed and matched with the DW LED Series wall washers.
The VT LED Series is the leading Video/Tele Conference fixture sold worldwide. The unique indirect LED fixtures comfortably provide vertical illumination on participants, minimizing facial shadowing, while keeping direct light/glare off of the monitor and camera.
Video/Tele Conference fixtures. Unique, indirect 2´ x 2´ LED fixtures provide even vertical illumination in three directions. They comfortably illuminate participants with minimal facial shadowing while keeping direct light/glare off of the monitor and camera.
From programmable light levels to multiple dimming options, our highly configurable luminaire packs in all the options you need. The new BW165 balances visual comfort, performance and tunable white light ranging from 6500K down to 2700K in an easy to specify platform that’s perfectly positioned for today’s competitive marketplace.
Wall Wash/Wal Graze Architectural
Small Profile 1.65” Recessed Linear Flush BW165RF The BW165 by Birchwood Lighting sets a new standard in linear architectural illumination with its intuitive specification, improved installation, and ease of service, all within a 1.65” wide platform. This specification-friendly, no compromise solution is ideal for recessed straight runs, shapes, walls, and wet location covered canopy applications.
High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD DCS is a digital, high definition, passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. It features four pyroelectric detectors with a high performance lens system that creates a new global standard in detection with 4,800 switching zones. Included light level feature provides the option to dim and turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting allows a precise method of controlling lighting zones by means of optimizing the detection reach without compromising sensitivity. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.
40 kHz Ultrasonic Presence Detector. Ceiling Mount. Square & Scalable. The US Quattro DCS is a digital (40kHz) ultrasonic technology presence detector that utilizes STEINEL’s stateof-the-art ultrasonic signal processing to provide superior stable volumetric omnidirectional detection. Ultrasonic is used for best practice in design and retrofit applications where the sensor will not have a clear line of sight view of the occupants in the desired coverage area. Lighting loads are controlled in relation to both presence detection and selectable ambient light levels with the integrated photocell to maximize energy savings. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.
40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Hallway COM1-24 is a low voltage (40 kHz) Ultrasonic Technology Occupancy Sensor that utilizes STEINEL’s state of the art ultrasonic signal processing to provide superior stable volumetric bidirectional detection. The unique linear bidirectional coverage pattern is engineered specifically for hallways and applications requiring a true linear volumetric pattern of detection. This is an ideal hallway sensor for design and retrofit applications. Operational choices of manual on or auto on with either momentary or maintained switch options. Included force off light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for pier to pier grouping achieving expanded detection zones with convenient control set up functions set at only one primary sensor for the entire group. Mounting options provide for 4” Square box, 4” Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available service and user wireless remotes provide simplified commissioning and occupant convenience. The Control PRO group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting (as in the COM2-24 versions) and optional 1-10 volt dimming and daylighting options (in the DIM-24 versions).
PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro DIM-24 is a low voltage passive infrared presence detector setting a new standard in lighting and 1-10 volt dimming control with minimal movement required for human presence detection. Provides for superior presence detection, energy savings and occupant convenience. Lighting is controlled in relation to both the presence of motion and ambient light levels. Operational choices of manual on or auto on with either momentary or maintained switch options. The Stay ‘ON’ time DIM before ‘OFF’ option provides basic illumination for the selected stay-‘ON’ time when ambient light falls below the selected brightness threshold that is set. This can be dimmed to 10% of maximum light intensity. As soon as a person is detected, the sensor switches either to 100% light intensity (constant-lighting controller ‘OFF’) or adjusts to the preselected brightness level (constant-lighting controller ‘ON’). When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brightness after the stay ‘ON’ time (1 min. - 30 min.) has expired or the daylight level exceeds the selected level of brightness. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available time saving wireless remote commissioning and set up tool and the user / occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).
4 Button Scene Switch. Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
PIR 360° Ceiling Mount Occupancy Sensor. The IS 3360-24 is part of the STEINEL family of German engineered, high performance commercial occupancy sensors. With 360° of uninterrupted coverage, the IS 3360-24 provides exceptional lighting control in a wide range of spaces. IS 3360-24 sensors are passive infrared and respond to heat radiated from human body motion. They mount on a ceiling and turn lighting ON either automatically with occupancy or manually using a low voltage wall switch and the manual on mode of a STEINEL power pack. After a period of time where no occupancy has been detected, the sensor switches lighting OFF.
High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD COM1-24 is a low voltage, high definition, passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. Features four digital pyroelectric detectors with a high performance lens system that creates a new global standard in detection with 4,800 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy saings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the detection reach without compromising sensitivity providing precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available time saving wireless remote commissioning set up tool and the user /occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).
2 Zone ON/OFF Switch. Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
High Bay Extension Module ‐ (bulk polybag). The EM 1 Extender Module is used with STEINEL high bay occupancy sensors. It is recommended if the knockout at the end of the fixture is located greater than 1/2” from the bottom edge of the fixture.
Photo Sensor. Open Loop or Closed Loop Photo Sensor. Ceiling Mount. The PS, Photo Sensor, is a low voltage photocell used for controlling lighting circuits based on natural daylight. It works with the STEINEL DCS by signalling a change in light levels to the controller.
40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Quattro COM1-24 is a low voltage (40 kHz) Ultrasonic Technology Presence Detector that utilizes STEINEL’s state of the art ultrasonic signal processing to providing superior stable volumetric omnidirectional detection. Ultrasonic is used for best practice in design and retrofit applications where the sensor will not have a clear line of site view of the occupants in the desired coverage area. Operational choices of manual on or auto on with either momentary or maintained switch options. The force off light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for pier to pier grouping achieving expanded detection zones with convenient control set up functions set at only one primary sensor for the entire group. Mounting options provide for 4” Square box, 4” Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available service and user wireless remotes provide simplified commissioning and occupant convenience. The Control PRO group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting (as in the COM2-24 versions) and optional 1-10 volt dimming and daylighting options (in the DIM-24 versions).
High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD DIM-24 is a low voltage, high definition, passive infrared presence detector that is setting a new standard in lighting control. Featuring 1-10 volt dimming coupled with four pyroelectric detectors and a high performance lense system that creates 4,800 presence detection switching zones. Provides superior presence detection, energy savings and occupant convenience. Lighting is controlled in relation to both the presence of motion and ambient light levels. Operational choices of manual on or auto on with either momentary or maintained switch options. The Stay ‘ON’ time DIM before ‘OFF’ option provides basic illumination for the selected stay-’ON’ time when ambient light falls below the selected brightness threshold that is set. This can be dimmed to 10% of maximum light intensity. As soon as a person is detected, the sensor switches either to 100% light intensity (constant-lighting controller ‘OFF’) or adjusts to the preselected brightness level (constant-lighting controller ‘ON’). When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brighness after the stay ‘ON’ time (1 min. - 30 min.) has expired or the daylight level exceeds the selected level of brightness. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. Available time saving wireless remote commissioning set up tool and the user / occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).
40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Hallway DCS is a digital (40kHz) ultrasonic technology occupancy sensor that utilizes STEINEL’s stateof-the-art ultrasonic signal processing to provide superior stable volumetric bidirectional detection. The unique linear bidirectional coverage pattern is engineered specifically for hallways and applications requiring a true linear volumetric pattern of detection. This is an ideal hallway sensor for design and retrofit applications. Lighting loads are controlled in relation to both presence detection and selectable ambient light levels with the integrated photocell to maximize energy savings. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.
PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro DCS is a digital passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. It features a single pyroelectric detector with a high performance lens system creating 1,760 switching zones. Included light level feature provides the option to dim and turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting allows a precise method of controlling lighting zones by means of optimizing the detection reach without compromising sensitivity. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together, providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.
PIR Occupancy Sensor. Ceiling Mount Recessed. IP65. Required by planners and architects, made by STEINEL. The IR Quattro MICRO fulfills many wishes. Its small size and the low profile design make it perfect for applications where disturbing installations on the ceiling are to be avoided. The micro-precision lens measures just 15 x 15 mm. Its performance is nevertheless stunning. The 360° infrared presence detector detects 36 m². And the IP65 classification lets you install it in rooms that are subject to moisture. The IR Quattro MICRO – our smallest unit with huge potential.
PIR Occupancy Sensor. Ceiling Mount Recessed. Noticeably Inconspicuous. IR Quattro SLIM XS, the extra-slim presence detector in concealed-box format. Fits into any standard concealed box. Overall height of just 6 mm. High-precision 360° infrared senor with globally unique retina lens and 16 sq.m square presence detection zone (4 x 4 m). The extra slim IR Quattro SLIM XS presence detector virtually disappears in the wall or ceiling. Thanks to the new and practical concealed box format it forms a remarkably unobtrusive symbiosis with the office environment and can now be installed in any standard concealed box. In short: our slimmest presence detector would seem to be pretending it wasn't even there - and yet is absolutely present when it matters.
DCS Controller. 3 x 20 A Relays. 3 x 0-10 V Dimming, Wireless BLE Mesh, Time Clock with Astronomic Funcations. STEINEL's new Digital Control Solution answers the demand for a cost-effective digital controller that maximizes energy savings while allowing occupants to control their lighting preferences. We made it functional out of the box with predefined and customer use cases. With no front end needed and packed with standard features, it is the Smarter Digital Control Solution.
PIR High Bay Aisle Sensors. (Individual). The HBS 200 High Bay Occupancy Sensor provides occupancy based lighting control in high bay aisleway applications. The sensor performs at a wide range of mounting heights, up to 45 feet. It mounts directly to a high bay lighting fixture or junction box.
Photo Sensor. Open Loop or Closed Loop Photo Sensor. Ceiling Mount. The PS WL, Photo Sensor, is a low voltage photocell used for controlling lighting circuits based on natural daylight. It works with the STEINEL DCS by signalling a change in light levels to the controller. Designed for an outdoor wet location mounting that is safe for sunlight exposure or indoor location.
High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD COM1-WR is a line voltage, high definition, passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. Features four digital pyroelectric detectors with a high performance lens system that creates a new global standard in detection with 4,800 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box or Round 3.0 Mud-Ring. The available time saving wireless remote commissioning set up tool and the user /occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).
Power Pack. Manual/Auto (ON) Switching. 20 Amp. Relay. The TR 100 is a full featured power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. These are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. Each power pack contains a Mode Switch to select either manual ON or automatic ON operation. In manual ON mode, occupants operate a low voltage momentary switch to turn lights ON.
DCS Connect with BACnet. 3 x 20 A Relays. 3 x 0-10 V Dimming, Wireless BLE Mesh, Time Clock with Astronomic Funcations. STEINEL's new DCS Connect answers the demand for a cost-effective digital controller that maximizes energy savings while allowing occupants to control their lighting preferences. We made it functional out of the box with predefined and customer use cases. With no front end needed and packed with standard features, this model has BACnet allowing a building intelligence and managment control integration.
Dualtech PIR & 40 kHz Ultrasonic Presence Detector. Ceiling Mount. The DT Quattro DCS Dual Technology Presence Detector utilizes PIR and ultrasonic technologies to detect the presence or signature of a person in a space. The logic options for initial “ON” and “Maintained” state of occupancy gives design engineers and installation contractors the choice for proper control of lighting and building automation in difficult applications where detection options are needed in a single device. Lighting loads are controlled in relation to both presence detection and selectable ambient light levels with the integrated photocell to maximize energy savings. STEINEL’s world class PIR optics and ultrasonic signal processing provides unparalleled line of sight and volumetric presence detection. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.
6 Button Scene Switch. Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
Super Duty Power Pack. Manual/Auto (ON) Switching. 20 Amp. Relay. The TR 200 is a full-featured super duty lighting and plug load power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. The power packs switch the load(s) on and off in response to signals from control inputs. The TR 200 is a Class 2 Output Power Supply, suitable for parallel interconnection. Wires: All wires have UL Style 1659, 250°C, 600V insulation: • 18 AWG: Black for Line and White for Neutral • 12 AWG: two Red wires for normally closed dry contact from the 20A relay • 22 AWG: 5 low voltage conductors: Red (+24VDC), Black (-24 VDC), Blue (Control Input), Brown (Communication Link), Gray (Switch Input)
Power Pack. Manual/Auto (ON) Switching, Force ON/OFF, Isolated NO/NC. 20 Amp. Relay. The TR 150 is a full featured power pack with an isolated relay that provides power to STEINEL low voltage occupancy sensors and other control devides. They are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. Each power pack contains a Mode Switch to select either manual ON or automatic ON operation. In manual ON mode, occupants operate a low voltage momentary switch to turn lights ON.
Super Duty Power Pack. Manual/Auto (ON) Switching, Force ON/OFF, Isolated NO/NC. 20 Amp. Relay. The TR 250 is a full-featured super duty lighting and plug load power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. The power packs switch the load(s) on and off in response to signals from control inputs. The TR 250 contains force on and force off inputs for use with a building management system and an isolated normally open and normally closed relay for signaling a BMS, HVAC controls or other low voltage devices. The TR 250 is a Class 2 Output Power Supplies, suitable for parallel interconnection.
Universal Smart Remote Commissioning Tool. iOS and Android App. The STEINEL Smart Remote (commissioning tool) gives the installer the ability to set basic functions of the entire line of the Control Pro Series of sensors via remote control. Simply download the free iOS or Android APP to any smartphone or tablet and connect via Bluetooth to the Smart Remote. Installer / commisioning agent can commission all STEINEL Control Pro and KNX sensors remotely with ease and convienance. The commissioning agent can save and reload commonly used setting profiles for repetitive commissioning of typical room types.
Dimming Switch . 1 Zone. 1 Slider and 1 Button. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
Multi Switch. 3 Dimming Zones. 3 Scenes and Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Hallway COM2-24 is a low voltage (40 kHz) Ultrasonic Technology Occupancy Sensor that utilizes STEINEL’s state of the art ultrasonic signal processing to provide superior stable volumetric bidirectional detection for independent control of both lighting and HVAC. Lighting is controlled in relation to both the presence of motion and ambient light levels. The HVAC output (isolated normally open and normally closed dry contacts) are signaled in relation to only the presence of motion. The unique linear bidirectional coverage pattern is engineered specifically for hallways and applications requiring a true volumetric bidirectional linear pattern of detection. This is an ideal hallway sensor for design and retrofit applications. Operational choices of manual on or auto on with either momentary or maintained switch options. Included “force off” light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for pier to pier grouping achieving expanded detection zones with control set up functions set at only one primary sensor for the entire group. Mounting options provide for 4” Square box, 4” Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available service and user wireless remotes provide simplified commissioning and occupant convenience. The Control PRO group of presence detectors are available in multiple presence detection technologies for the control of heating, ventilation and air-conditioning as well as lighting (as in the COM2-24 versions) and optional 1-10 volt dimming and daylighting options (in the DIM-24 versions).
2 Button Scene Switch. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
Wire Guard Cage. For Control Pro Presence Detectors. It provides protection from damage, e.g. from balls or vandals. Suitable for the following Presence Control PRO presence detectors and connection options: IR Quattro HD, IR Quattro, HF 360 and Dual HF.
High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD COM2-24 is a low voltage, high definition, passive infrared presence detector setting a new standard in lighting and HVAC control with minimal movement required for human presence detection. Lighting is controlled in relation to both the presence of motion and ambient light levels. The HVAC output (isolated normally open and normally closed dry contacts) are signaled in relation to only the presence of motion. Features four digital pyroelectric detectors with a high performance lens system that creates a new global standard in detection with 4,800 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available time saving wireless remote commissioning set up tool and the user /occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).
40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Hallway DIM-24 is a low voltage (40 kHz) Ultrasonic Technology Occupancy Sensor that utilizes STEINEL’s state of the art ultrasonic signal processing to provide superior stable volumetric bidirectional detection and provides a 1-10 volt dimming output to control ballasts or driver lighting loads. Lighting is controlled in relation to the presence of motion, the user selected dim level by remote or momentary switch and ambient light levels. As soon as occupancy is detected, the sensor goes to either the last selected electric light dim level (constant-lighting controller ‘OFF’) or adjusts to the last selected electric light + daylight brightness level (constant-lighting controller ‘ON’). The “force off” light level feature will turn lights off when sufficient daylight is present for additional energy savings. When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brightness (1.6 volts), after the Stay ‘ON’ time DIM before ‘OFF’ delay has expired the light turns off. The unique linear bidirectional coverage pattern is engineered specifically for hallways and applications requiring a true volumetric linear pattern of detection. This is an ideal hallway sensor for design and retrofit applications. Operational choices of auto on or manual on with a momentary or maintained switch input. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for pier to pier grouping achieving expanded detection zones with control set up functions set at only one primary sensor for the entire group. The available service and user wireless remotes provide simplified commissioning and occupant convenience. The Control PRO group of detectors are available in multiple presence detection technologies for the control of heating, ventilation and air-conditioning as well as lighting (as in the COM2-24 versions) and optional 1-10 volt dimming and daylighting options (in the DIM-24 versions).
40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Oneway DCS is a digital (40kHz) ultrasonic technology occpancy sensor that utilizes STEINEL’s state of the art ultrasonic signal processing to provide superior stable volumetric unidirectional detection. The unique linear unidirectional coverage pattern is engineered specifically for hallways and applications requiring a true volumetric linear pattern of detection. This is an ideal hallway sensor for design and retrofit applications where coverage is desired only in a single direction or small space applications where the sensor will not have a complete line of sight view of the occupied space. Lighting loads are controlled in relation to both presence detection and selectable ambient light levels with the integrated photocell to maximize energy savings. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.
3 Zone ON/OFF Switch. Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
PIR Ceiling Mount Corridor Occupancy Sensor. With a unique, specially designed detection lens, the IS 345-24 occupancy sensor is ideal for controlling lights in long corridors or aisleways. The sensor is part of the STEINEL family of German engineered, high performance commercial occupancy sensors. IS 345-24 sensors are passive infrared and respond to heat radiated from human body motion. They mount on a ceiling and turn lighting ON either automatically with occupancy or manually using a low voltage wall switch and the manual on mode of a STEINEL power pack. After a period of time where no occupancy has been detected, the sensor switches lighting OFF.
40 kHz Ultrasonic Presence Detector. Ceiling Mount. The US Oneway COM1-24 is a low voltage (40 kHz) Ultrasonic Technology Occupancy Sensor that utilizes STEINEL’s state of the art ultrasonic signal processing to providing superior stable volumetric unidirectional detection. The unique linear unidirectional coverage pattern is engineered specifically for hallways and applications requiring a true volumetric linear pattern of detection. This is an ideal hallway sensor for design and retrofit applications where coverage is desired only in a single direction or small space applications where the sensor will not have a complete line of site view of the occupied space. Operational choices of manual on or auto on with either momentary or maintained switch options. Included force off light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for pier to pier grouping achieving expanded detection zones with convenient control set up functions set at only one primary sensor for the entire group. Mounting options provide for 4” Square box, 4” Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available service and user wireless remotes provide simplified commissioning and occupant convenience. The Control PRO group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting (as in the COM2-24 versions) and optional 1-10 volt dimming and daylighting options (in the DIM-24 versions).
Dimming Switch . 2 Zone. 2 Sliders and 2 Buttons. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
PIR High Bay 360° Sensor. (Individual). The HBS 300 High Bay Occupancy Sensor provides 360 degrees of occupancy based lighting control in high bay open area applications. The sensor performs at a wide range of mounting heights, up to 45 feet. It mounts directly to a high bay lighting fixture or junction box. With three highly sensitive pyroelectric detectors and a multi-segmented lens, the HBS 300 is able to achieve 1416 switching zones.