Line Card
160 manufacturers · 18,987 products
Search
Product TypeAll types▾
15,153 products
BrandAll▾
SortRelevance▾
Specification grade, flexible LED sheet with minimal cutting increments
Double FlexBeam is a fantastic new solution for challenging architectural applications. It combines precise optics, power and high flexibility with capability to bend both horizontally and vertically. Various beam spreads increase the flexibility and help finding the perfect solution for various lighting challenges.
DMX Controller – 1 zone, 4 Channel Input Power12-24VDCOutput ProtocolDMX512ProgrammabilityN/ADimension (in)3.38 x 3.38 x 1.15StandardsEC, EMC, ROHS, ETL CDMX4C
BE01 is a very common recessed extrusion as it is still quite small but can hold all lumen output tapes of the Beulux range. Made from anodized aluminum it has great heat dissipation capabilities.
BA02 is made from anodized aluminum and is large enough to incorporate the 120V Madrid tape as well as the Flexbeam but can be equipped with most Beulux’s tape lights. Its versatility allows for use as surface mount, recessed, and pendant mount.
Architectural tape light using high quality LEDs. LM80>60,000 hours. Discharge and reverse polarization protection.
AC02 is made from high quality aluminum and offers a round lens which provides a softer look and a wider distribution angle (180°), therefore also providing lateral light. Made from anodized aluminum it has great heat dissipation capabilities.
AB02 is the perfect extrusion for shelves, under cabinet, and more occasions where small and unobtrusive lighting solutions are required. The sleek design integrates discretely and still offers powerful illumination. The intelligent engineering allows for easy installation without any visible screws. Made from anodized aluminum it has great heat dissipation capabilities.
The VT03 is a medium size extrusion constructed from high quality anodized aluminum that can be suspended as contemporary pendant light, or surface mounted for a sophisticated modern light fixture. The VT03 is accessorized with low-profile mounting hardware; when paired with the VT03-SL, a satined polycarbonate diffusor, creates a cylindrical look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 37⁄64 x 25⁄64CustomizationCut to specified length VT03
The JG04 is a 90° extrusion created from high quality anodized aluminum MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 3⁄16 x 1 3⁄16CustomizationCut to specified length JG04
IP42 Dimming OptionNon-DimmingIP RatingIP42Output Power12 WattInput Voltage90~264VACOutput Voltage24V DCDimension (in)3.03 x 1.57 x 1.14SafetyUL8750 NTR12IP42
IP00 Dimming OptionNon-DimmingIP RatingIP00Output Power108 WattInput Voltage88~264VACOutput Voltage24V DCDimension (in)6.26 x 3.81 x 1.5SafetyUL60950-1 NTR100IP00
Satined round lens extrusion VT03 (Ø 2 9⁄32″) MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4 , Ø 2 9⁄32CustomizationCut to specified length
XT01 is a very common recessed extrusion as it is still quite small but can hold all lumen output tapes of the Beulux range. Made from anodized aluminum it has great heat dissipation capabilities. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 29⁄32 x 49⁄64CustomizationCut to specified length XT01
IP00 Dimming OptionNon-DimmingIP RatingIP00Output Power156 WattInput Voltage88 ~ 132VACOutput Voltage24V DCDimension (in)7.83 x 3.86 x 1.5SafetyUL60950-1 NTR150IP00
London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.
OSLO L1000 was specifically developed to be used with extrusion JD01. The lumen output is arranged in a way that enables the use of the widths of fixtures with the exact same light density. Thus, the respective 2.2” wide diffusers will look uniform and harmonious. Using high quality components, OSLO comes with CRI>95 and maximum run lengths of 47’ due to the use of thick copper conductors and ICs along the tapes. CRI95 IP20 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>95LEDs/ft195Output (lm/ft)~ 1000Consumption (watt/ft)12.1Efficacy (lm/watt)83Beam Angle120°Voltage24V DCMax Run Length47 ftCustomization Increment1/2" Oslo Installation Guide 24V Tapelight
OSLO L450 was specifically developed to be used with extrusion JB01. The lumen output is arranged in a way that enables the use of the widths of fixtures with the exact same light density. Thus, the respective 1” wide diffusers will look uniform and harmonious. Using high quality components, OSLO comes with CRI>95 and maximum run lengths of 47’ due to the use of thick copper conductors and ICs along the tapes. CRI95 IP20 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>95LEDs/ft97Output (lm/ft)~ 450Consumption (watt/ft)5.5Efficacy (lm/watt)91Beam Angle120°Voltage24V DCMax Run Length47 ftCustomization Increment1/2" Oslo Installation Guide 24V Tapelight
The CT06 is a unique extrusion that is made from high quality anodized aluminum, it is compact giving this extrusion dual functionality as both a closet rod and lighting fixture. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 19⁄32 x 11⁄32CustomizationCut to specified length CT06
The UT01 is an inground extrusion that is made of high-quality anodized aluminum, this extrusion is very strong and durable, making it perfect for indoor residential or commercial applications. This extrusion pairs with the UT01-SL, which is a sturdy polycarbonate lens that makes it walk-over enabled and emits a smooth line of light for a polished look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 55⁄64 x 1CustomizationCut to specified length UT01
The PH02 is a recessed or surface mounted walk-over fixture that consists of the outer solid aluminum and the sturdy inner, one-piece PMMA extrusion. This fixture can withstand a maximum weight of 30kN and is considered IP67. This extrusion creates uniform light lines and can be used as single fixture or combining several fixtures without shadows, to create continuous seamless light lines and makes for an excellent outdoor and indoor linear light. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 13⁄16 x 1 49⁄64CustomizationCut to specified length
The LB03OUT is a unique extrusion with innovative design that allows to transform an outer dry wall corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length LB03OUT
The PH02 is a recessed or surface mounted walk-over fixture that consists of the outer solid aluminum and the sturdy inner, one-piece PMMA extrusion. This fixture can withstand a maximum weight of 30kN and is considered IP67. This extrusion creates uniform light lines and can be used as single fixture or combining several fixtures without shadows, to create continuous seamless light lines and makes for an excellent outdoor and indoor linear light. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 13⁄16 x 1 49⁄64CustomizationCut to specified length PH02
The VT02 is a slim extrusion constructed from high quality anodized aluminum that can be suspended as contemporary pendant light, or surface mounted for a sophisticated modern light fixture. The VT02 is accessorized with low-profile mounting hardware; when paired with the VT02-SL, a satined polycarbonate diffusor, creates a cylindrical look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 53⁄64 x 9⁄32CustomizationCut to specified length VT02