160 manufacturers · 18,987 products

The VT01 is a slim extrusion constructed from high quality anodized aluminum that can be suspended as contemporary pendant light, or surface mounted, for a sophisticated modern light fixture. The VT01 is accessorized with low-profile mounting hardware; when paired with the VT01-SL, a satined polycarbonate diffusor, creates a cylindrical look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1⁄2 x 1⁄4 , Ø 31/32"CustomizationCut to specified length VT01

The AL02 was designed as a very versatile extrusion that is known for its capabilities to bend to fit new and creative applications. Can be used surface mount or as a pendant.

The AA07 was created with bathrooms and kitchen areas in mind; this under tile extrusion is constructed from high quality anodized aluminum and is used to create lineation between tiles or to beautifully end a line of tiles. This creates a sublime accent for counters and vanities alike and it can be mounted horizontally or vertically for added customization. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 31⁄64 x 7⁄16CustomizationCut to specified length AA07

The LB03OUT is a unique extrusion with innovative design that allows to transform an outer dry wall corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length

The JD01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 2 39⁄64 x 39⁄64CustomizationCut to specified length JD01

The JC01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 2 x 39⁄64CustomizationCut to specified length JC01

The JB01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x W 1 27⁄64 x 39⁄64CustomizationCut to specified length JB01

The JA01 is a flangeless pocket extrusion that combines a hidden light source with a smooth angle in the extrusion to exude an exquisite glow onto floors, walkways, stairs and can also be used as an uplight (to replace a cove). MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 39⁄64 x 2 13⁄64CustomizationCut to specified length JA01

The AG01 is a recessed flangeless extrusion that is constructed using anodized aluminum and it is designed to be used for wall and ceiling, with easy installation. This extrusion can have diffusors up to 19’ 6” length, creating a seamless look for longer runs.

The AA01 is a fully regressed and flangeless dome extrusion giving indirect light. The entirely indirect light combined with the 3-dimensional effect make this product a unique and outstanding architectural detail of immense esthetical beauty. Can be customized on site. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 2 13⁄16 x 1 53⁄64CustomizationCut to specified length AA01

The JF04 is a small 90° extrusion that was created from high quality anodized aluminum. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 5⁄8 x 5⁄8CustomizationCut to specified length JF04

The YT02 is a small surface mounted extrusion that is made using quality anodized aluminum. Offering great heat dissipation capabilities, the YT02 is best suited for a low-medium output tape light range. The YT line is known for its size and versatility in applications, which can help facilitate the project specification process. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 11⁄16 x 11⁄32CustomizationCut to specified length YT02

The VT02 is a slim extrusion constructed from high quality anodized aluminum that can be suspended as contemporary pendant light, or surface mounted for a sophisticated modern light fixture. The VT02 is accessorized with low-profile mounting hardware; when paired with the VT02-SL, a satined polycarbonate diffusor, creates a cylindrical look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 53⁄64 x 9⁄32CustomizationCut to specified length VT02

The AL02 was designed as a very versatile extrusion that is known for its capabilities to bend to fit new and creative applications. Can be used surface mount or as a pendant. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 45⁄64 x 5⁄32CustomizationCut to specified length AL02

RF Receiver – RGBW/Tunable White , 5 Channel C94.92-RF

RF Receiver – RGBW , 4 Channel C94-RF

RF Receiver – Dimming 1-10V /driver 50W, Input 230V, Output 24V C91-RF

DMX/RF – WiFi Controller CRF-WIFI

RF to DMX Converter CRF-DMX

DMX Decoder – 12 channel (4Amp per channel), 5-pin XLR output, 8/16 bit switches CDMX12C

DMX Decoder – 5 Channel (4Amp per channel), 5-pin XLR output, 8/16 bit switches CDMX5C

DMX Controller – USB, Ethernet and RS232 connection, 10 Zone, 1024 Channel C94-3ZW

IP42 16 WattNon-DimmingIP RatingIP42Output Power25.2 WattInput Voltage90~264VACOutput Voltage24V DCDimension (in)3.31 x 2.44 x 1.16SafetyUL8750 NTR25IP42

IP42 Dimming OptionNon-DimmingIP RatingIP42Output Power16.08 WattInput Voltage90~264VACOutput Voltage24V DCDimension (in)3.03 x 1.57 x 1.14SafetyUL8750 NTR16IP42

IP00 Dimming OptionNon-DimmingIP RatingIP00Output Power751.2 WattInput Voltage90 ~ 264VACOutput Voltage24V DCDimension (in)9.84 x 5 x 1.61SafetyUL60950-1 NTR750IP00

IP00 24VDCNon-DimmingIP RatingIP00Output Power321.6 WattInput Voltage88~264VACOutput Voltage24V DCDimension (in)8.46 x 4.53 x 1.18SafetyUL60950-1 NTR320IP00

IP00 Dimming OptionNon-DimmingIP RatingIP00Output Power76.8 WattInput Voltage88~264VACOutput Voltage24V DCDimension (in)5.08 x 3.81 x 1.5SafetyUL60950-1 NTR75IP00

IP00 Dimming OptionNon-DimmingIP RatingIP00Output Power52.8 WattInput Voltage88~264VACOutput Voltage24VDCDimension (in)3.90 x 3.81 x 1.42SafetyUL60950-1 NTR50IP00

Mounting Plate for UT01, VT02, VT03 Extrusions

End support for aluminum closet rod with lighting accent CT06 extrusion

Content here

Mounting Clip for AA02, YT01, YT02, YT04, YT07, YT09 Extrusions

Mounting Clip for WT02, XT01, XT02, YT06 Extrusions

90° Adjustable angle for AA02, XT01, XT02, YT02 Extrusions

Recessed Spring for YT08 Extrusion

Mounting Clip for VT01 / VT02 Extrusions

Mounting Clip for London Wave – Side View

Mounting Clip for Liquid Light – Small Top View

Mounting Clip for Liquid Light – Large Top View

Mounting Clip for Liquid Light – Large Side View

Mounting Clip for JF04 Extrusion

End cap for YT06 Extrusion + YT99-CL / YT99-SL Lens

End cap for YT04 Extrusion + YT99-CL / YT99-SL Lens

End cap for XT01 Extrusion + XT99-DL Lens

End cap for VT03 Extrusion + VT03-SL Lens

End cap for VT02 Extrusion + VT02-SL Lens

End cap for UT01 Extrusion + UT01-SL Lens

End cap for PH02 Extrusion

End cap for PH01 Extrusion

End cap for LA01 Extrusion + LAC99-SL Lens

End cap for JG04 Extrusion + JG04-SL90 Lens

End cap for JA01 Extrusion + JA99-SL Lens

End cap for CT06 Extrusion + CT99-AL / CT99-CL60 / CT99-DL Lens

End cap for AG01 Extrusion + AG01-SL Lens

End cap for AA07 Extrusion + AA99-CL or AA99-SL Lens

Madrid Jumper Cable – 2 Ft

Liquid Light – Small Top/Side View4 Pin connectors: (1 ft) cable for each male & female connector for RGB

Liquid Light – Small/Top Side View3 Pin connectors: (1 ft) cable for each male & female connector for Tunable White

Liquid Light – Small Top/Side View2 Pin connectors: (1 ft) cable for each male & female connector

Liquid Light – Large Top/Side View5 Pin connectors: (1 ft) cable for each male & female connector for RGBW