Line Card
160 manufacturers · 18,987 products
Search
Product TypeAll types▾
15,153 products
BrandAll▾
SortRelevance▾
The LA01 is a recessed pocket extrusion that is crafted from high quality anodized aluminum, measuring just below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch studs or create special stud structures. The pocket extrusion allows for a hidden light source with a smooth angle in the extrusion to exude a beautiful radiant light onto floors, walkways, stairs and can also be used as an uplight (to replace a cove). MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 31⁄64 x 2 9⁄32CustomizationCut to specified length LA01
The VT01 is a slim extrusion constructed from high quality anodized aluminum that can be suspended as contemporary pendant light, or surface mounted, for a sophisticated modern light fixture. The VT01 is accessorized with low-profile mounting hardware; when paired with the VT01-SL, a satined polycarbonate diffusor, creates a cylindrical look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1⁄2 x 1⁄4 , Ø 31/32"CustomizationCut to specified length VT01
RF Remote Controller – Tunable White , 6 Zone, 3 Channel C92-6ZR
Seamless satined lens for extrusion XT family MaterialSeamless PCColorMilky WhiteDimension (ft)Length - Up to 19.7 ftCustomizationCut to specified length
Seamless satined lens for extrusion JD01 MaterialSeamless PCColorMilky WhiteDimension (ft)Length - Up to 19.7 ftCustomizationCut to specified length
Satined lens for extrusion YT family MaterialPMMAColorSatinedLight TransmissionDimension (in)Length - 78 3⁄4CustomizationCut to specified length
90° Satined lens for extrusion WT02 MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4CustomizationCut to specified length
Satined lens for extrusion JA MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4CustomizationCut to specified length
Satined lens for extrusion AG01 MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4CustomizationCut to specified length
London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.
London Wave is an improved Neon Flex replacement using latest LED technology and creates pixilation free, uniform light lines, straight or curved. Made from UV-resistant silicone. The 270° light output provides direct as well as lateral and back light. Can be used with aluminum extrusion for straight lines or with the flexible extrusion to keep curves exactly as desired. Also mounts to the surface with mounting clips.
Architectural tape light using high quality LEDs. LM80>60,000 hours. Discharge and reverse polarization protection. CRI90 IP00 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>90LEDs/ft36Output (lm/ft)420-481Consumption (watt/ft)4.1Efficacy (lm/watt)97-114Beam Angle120°Voltage24V DCMax Run Length16 ftCustomization Increment2” Athens A-L460 Installation Guide 24V Tapelight
Architectural tape light using high quality LEDs. LM80>60,000 hours. Discharge and reverse polarization protection. CRI90 IP00 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>90LEDs/ft36Output (lm/ft)240-275Consumption (watt/ft)2.1Efficacy (lm/watt)100-117Beam Angle120°Voltage24V DCMax Run Length26 ftCustomization Increment2” Athens A-L240 Installation Guide 24V Tapelight
Specification Grade tape light with intelligent design and high quality components. Osram LEDs, 3Oz double layer copper conductors, gold-plated solder pads and constant current ICs guarantee uniform light levels even with longer run lengths up to 55’. LM80>60,000 hours. Discharge and reverse polarization protection. CRI90 IP00 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>90LEDs/ft36Output (lm/ft)174-204Consumption (watt/ft)1.6Efficacy (lm/watt)102-120Beam Angle120°Voltage24V DCMax Run Length55 ftCustomization Increment2" Florence F-L200 Installation Guide 24V Tapelight
The VT03 is a medium size extrusion constructed from high quality anodized aluminum that can be suspended as contemporary pendant light, or surface mounted for a sophisticated modern light fixture. The VT03 is accessorized with low-profile mounting hardware; when paired with the VT03-SL, a satined polycarbonate diffusor, creates a cylindrical look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 37⁄64 x 25⁄64CustomizationCut to specified length VT03
Seamless clear lens for extrusion XT family MaterialSeamless PCColorClearDimension (ft)Length - Up to 19.7 ftCustomizationCut to specified length
60° Clear lens for extrusions CT family MaterialPMMA / PCColorClearDimension (in)Length - 78 3⁄4CustomizationCut to specified length
The YT06 is a unique dual sided extrusion designed to create the perfect wall sconce that offers mounting versatility for the look of choice. When mounted horizontally the light produced can be direct – indirect lighting, or one sided. When mounted to the ceiling, it produces a distinctive semi-indirect light. The dual sided capabilities of this extrusion makes it easy to provide an exclusive look to any room it is installed in. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 47⁄64 x 2 11⁄64CustomizationCut to specified length YT06
The PH01 is a recessed walk-over fixture that consists of the outer solid aluminum and the sturdy inner, one-piece PMMA extrusion. This fixture can withstand a maximum weight of 30kN and is considered IP67. To be used with the flanges in the ground or above ground, both is possible. PH01 creates uniform light lines and can be used as single fixture or combining several fixtures without shadows to create continuous seamless light lines and makes for an excellent outdoor and indoor ingrade uplight. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 9⁄32 x 2 21⁄64CustomizationCut to specified length PH01
The LB03IN’s innovative design has been created to transform an inner corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length
The PH01 is a recessed walk-over fixture that consists of the outer solid aluminum and the sturdy inner, one-piece PMMA extrusion. This fixture can withstand a maximum weight of 30kN and is considered IP67. To be used with the flanges in the ground or above ground, both is possible. PH01 creates uniform light lines and can be used as single fixture or combining several fixtures without shadows to create continuous seamless light lines and makes for an excellent outdoor and indoor ingrade uplight. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 9⁄32 x 2 21⁄64CustomizationCut to specified length PH01
The YT04 is a small 90° extrusion that is built from quality anodized aluminum. With great heat dissipation capabilities, the YT04 is best suited for a low-medium output tapelight range. The YT line is known for its size and versatility in applications, which can help facilitate the project specification process. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 11⁄16 x 11⁄16CustomizationCut to specified length YT04
DMX Controller – USB, Ethernet and RS232 connection, 10 Zone, 1024 Channel Input Power6-7V DCOutput ProtocolDMX512 (x2)ProgrammabilityPC, Mac, Tablet, SmartphoneConnectionsUSB, Ethernet, RS232, Clock, 8 dry contact ports, 5v Output RelayDimension (in)4.17 x 5.75 x .39StandardsEC, EMC, ROHS, ETL C94-10ZDMX
Dimming OptionNon-DimmingIP RatingIP00Output Power960 WattInput Voltage90~264 VACOutput Voltage24V DCDimension (in)11.60" x 5.00" x 1.61"SafetyUL60950-1 NTR960IP00
90° Connector for AA01, JB01, JC01, JD01, JG04, VT01, VT02, XT01, Xt02, YT07 Extrusions
35° Clear lens for extrusion XT family MaterialPMMA / PCColorClearDimension (in)Length - 78 3⁄4CustomizationCut to specified length
Satined round lens for extrusion VT01 (Ø 31⁄32″) MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4 , Ø 31⁄32CustomizationCut to specified length
90⁰ Satined lens for extrusion AA family MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4CustomizationCut to specified length
Clear lens for extrusion AA family MaterialPMMA / PCColorClearDimension (in)Length - 78 3⁄4CustomizationCut to specified length
London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.
XT02 is a very common surface mounted extrusion as it is still quite small but can hold all lumen output tapes of the Beulux range. Made from anodized aluminum it has great heat dissipation capabilities.
Flo is made of silicone material which provided great flexibility allowing versatile designs from simple to stylish. It has a unique optical light distribution structure design that gives uniform lighting surface with no shadow. It is UV, saltwater, and solvent resistant.
The YT041 is a small 90° extrusion that is built from quality anodized aluminum. With great heat dissipation capabilities, the YT041 is best suited for a low-medium output tapelight range. The YT line is known for its size and versatility in applications, which can help facilitate the project specification process.
The JE08 is a small recessed extrusion, built using high quality anodized aluminum. This extrusion offers great heat dissipation qualities make it best suited for the low- medium output tape light range. The JE line is known for its size and versatility in applications, which can help facilitate the project specification process.
Beulux Coblence-S specification-graded series surpasses standard COB tape lights by using preselected, 1-Bin LEDs, ensuring perfect color consistency even over long runs. Constructed with SMD technology, it provides uniform light distribution without pixelation, offering superior performance and visual comfort.
525 W - 2.2 kW Lighting Inverter This UL 924 Listed, high-efficiency (up to 98.8%) fast-transfer inverter has a 2 millisecond or less transfer time, and includes monitored surge protection for LED lighting / drivers. The “Model FST” performs a weekly inverter self-diagnostic … no other fast-transfer or standby inverter manufacturer offers this! Wall- and floor-mount models provide the required 90 minutes of emergency backup power. Other runtimes up to 120 minutes are available.
58.5 kW - 112.5 kW Lighting Inverter (3 Phase) This LED-compatible, NFPA 101 compliant inverter features an intelligent, robust design providing enhanced levels of quality, reliability, and energy savings. Unique to CPC lighting inverters, the “Model ELS” offers four (4) field-selectable modes of operation based on input power conditions, lighting design, and the desire for high operating efficiency. All kW sizes are UL 924 Listed as “Emergency Lighting Equipment” (90 minutes runtime standard) and “Auxiliary Lighting and Power Equipment” (30, 60, and 120 minute runtimes available). C-UL models Listed to CSA C22.2 No. 141-15 are available with runtimes of 30, 60, or 90 minutes.
10 kW - 55 kW Lighting Inverter (3 Phase) Meeting stringent design and performance specifications, the self-diagnostic, self-testing "EON Model EL3" centralized emergency lighting inverter is UL 924 listed as “Emergency Lighting Equipment” and “Auxiliary Lighting and Power Equipment”, as well as NFPA compliant as “Life Safety Equipment”.
600 W - 2 kW Lighting Inverter The "UltraLITE Model ELC’s" compact front access design features one of the smallest cabinet footprints in the industry! Meeting the NFPA 101 and NFPA 111 standards, the Model ELC is considered "Life Safety Equipment". It is also UL 924 listed as "Emergency Lighting Equipment".