160 manufacturers · 18,987 products

The EB30 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB30 immediately switches to the emergency mode, keeping one or two lamps illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.

The SP10 is designed for use in conjunction with LED Drivers to provide an additional level of protection against powerline disturbances in industrial and commercial applications. Also protects electronic fluorescent and HID ballasts.

The ENTM Medium Designer Shoebox is designed for general-purpose area lighting with an aesthetically pleasing design. It is the perfect choice for lighting large open areas for safety and security. Retail applications, parking areas, or even wall mount applications for security lighting are all suitable applications for this fixture.

The pole shaft is fabricated from hot rolled carbon steel having a minimum yield of 55,000 PSI and conforms to ASTM A500 grade C requirements. The shaft construction is a single piece of formed steel welded longitudinally. The hand hole is located 1’ 6" above the pole base. A ground lug is provided standard.

Retrofit Kits are a great way to modify an exsisting fixture to save time and energy.

Great for gyms, walk in coolers, parking garages, canopies and other sensitive areas. Suitable for indoor and outdoor applications.

The Genesis Gen2 line of LED Lanscape Bullets are the most versatile LED fixtures on the market today. Various beam spreads and wattages allow for a customized finish to any property. The high end residential grade system was designed for low voltage operation residential applcations.

The ENT Large Designer Shoebox is designed for general-purpose area lighting with an aesthetically pleasing design. It is the perfect choice for lighting large open areas for safety and security. Retail applications, parking areas, or even wall mount applications for security lighting are all suitable applications for this fixture.

The EB5T5 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB5T5 immediately switches to the emergency mode, keeping one lamp illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.

Techlight’s line of high bays was designed for general manufacturing, warehouse, retail, assembly lines, or production environments.

The RCLS Recessed Canopy light was designed for low to mid-level lighting under storefront awnings, indoor retail applications, or any recessed mount lighting application. The finished product is an unobtrusive light fixture where you see the results, and not the fixture itself.

The high performance luminaire is designed for canopy/soffit applications where long life, low maintenance, and consistent color rendering is required. Areas with limited accessibility due to fixture location or where heavy traffic makes maintenance difficult are ideal applications such as retail canopies, parking garages, and petroleum dispensing canopy applications requiring Class 1 Div. 2 Hazardous Location rating.

The Genesis Gen2 line of LED Lanscape Bullets are the most versatile LED fixtures on the market today. Various beam spreads and wattages allow for a customized finish to any property. The high end residential grade system was designed for 120V operation residential applcations.

The Genesis Gen2 line of LED Lanscape Burial Lights are the most versatile LED fixtures on the market today. Various beam spreads and wattages allow for a customized finish to any property. The high end residential grade system was designed for 120V operation residential applcations.

The SP20A is designed for use in conjunction with LED Drivers to provide an additional level of protection against powerline disturbances in industrial and commercial applications. Also protects electronic fluorescent and HID ballasts.

The Tote-Em Series are Multi-Piece Poles designed for easy installation, convenient storage, and simple handling. The pole shaft is fabricated from hot rolled carbon steel having a minimum yield of 55,000 PSI and conforms to ASTM A500 grade C requirements. The shaft construction is formed steel welded longitudinally. The multiple pole pieces interlock via a splice plug welded to the top pole section and secured into the lower section using set screws. The hand hole is located 1’ 6” above the pole base. A ground lug is provided standard.

Low profile recessed Static Luminaries designed for general application and is ideal for restricted plenum spaces. Perfect for commercial office spaces, schools, hospitals or retail merchandising areas. With 50,000 hours of life at L70 standard and a 5-year limited warranty the fixture maintenance cost is reduced substantially over time.

The high performance retrofit is designed for applications where long life, low maintenance, and consistent color rendering are required. Areas with limited accessibility due to fixture location or where heavy pedestrian traffic makes maintenance difficult are ideal applications.

The LUVM-CMVS series retrofit series was designed to replace R40 clear mercury vapor lamps utilized to create moonlight effects. Utilizing a proprietary LED module combining white and colored LEDs, the LUVM-CMVS series is able to re-create the spectral distribution produced by R40 clear mercury vapor lamps. The module can be retrofitted into Techlight R40 bullet fixtures, or it can be installed in new construction installations using existing R40 bullet housings. It's primary usage is to accent lanscape features a greenery, where the application requires a high lumen output.

The high performance luminaire is designed for retrofit applications into existing acorn style luminaires replacing traditional and less effecient light sources without comprimising the quality of the delivered light.

The high lumen output luminaire is designed to be a replacement for HID and fluorescent high bays or low bays. It is optimal for lighting applications where long life, low maintenance, and consistent color rendering is required. Areas with limited accessibility due to fixture location or where heavy pedestrian or vehicle traffic makes maintenance difficult are ideal applications. The high wattage/lumen output allows the fixture to be used for many indoor sports venues and applications.

The Genesis Gen2 line of LED Lanscape Bullets are the most versatile LED fixtures on the market today. Various beam spreads and wattages allow for a customized finish to any property. The high end residential grade system was designed for low voltage operation residential applcations.

The R3AP36LV is a low voltage bullet light that was designed to effectively and efficiently be used as a statue spot light. Whether you are lighting a small statue in a yard, or a large piece of corporate art, the versatility of our statue spot light makes it the right fixture for the job at hand.

The Techlight Navigator Interchangeable Bollard offers versatility across a wide range of applications. It can be used for small-area lighting, such as illuminating walkways, pathways, and driveways. In architectural and landscape settings, it can provide accent lighting, enhance driveways and entrances, and illuminate pathways. For commercial and municipal applications, it can be used for campus lighting, park lighting, illuminating plazas and squares, enhancing the ambiance of hospitality venues, and illuminating retail spaces. In safety and security applications, it can provide perimeter lighting, serve as emergency lighting, and illuminate security checkpoints.

The LMSEB02 is ideal for powering low voltage lighting systems in both landscape and commercial settings. It improves the appearance, functionality, and safety of outdoor spaces such as gardens, pathways, fountains, and patios, while also providing reliable power for commercial applications like outdoor signage, parking lot lighting, building facades, and pathway illumination. Its robust construction ensures performance in the harshest environments. The indoor/outdoor low voltage transformer is encapsulated in a weatherproof steel enclosure. The aluminum powder-coated exterior housing and gasketed captive hinged door make it ideal for the harshest environments. It features a fully encapsulated 300 Watt, 120/12 Volt, dual-circuit transformer.

The TLCA-WP Series of Angle Iron Cross Arms is designed for use with Techlight lighting fixtures and is intended for field installation on existing wood poles (provided by others). These cross arms are sold individually and are ideal for retrofit or custom installations where Techlight poles are not used.

The Techlight Navigator Interchangeable Bollard offers versatility across a wide range of applications. It can be used for small-area lighting, such as illuminating walkways, pathways, and driveways. In architectural and landscape settings, it can provide accent lighting, enhance driveways and entrances, and illuminate pathways. For commercial and municipal applications, it can be used for campus lighting, park lighting, illuminating plazas and squares, enhancing the ambiance of hospitality venues, and illuminating retail spaces. In safety and security applications, it can provide perimeter lighting, serve as emergency lighting, and illuminate security checkpoints.

The FGE was designed as a durable transformer enclosure that could be used in harsh or coastal environments. Available in a wide range of transformer types and wattages.

In ground junction box for hard mounting fixtures with ½” knuckle or stem.

Retrofit Kits are a great way to modify an existing fixture to save time and energy.

Great for gyms, walk in coolers, parking garages, canopies and other sensitive areas. Suitable for indoor and outdoor applications.

The BL MR16 Zinc Series of low voltage MR16 bullets are sleek and low profile. Nearly seamless integration of the shield assembly removes the opportunity for debris and water to accumulate. The array of MR16 color temperatures and beam spreads available make these fixtures indispensable for directional flood and spot lighting applications.

The LUVM Series Module was conceived to replace the 175W R40 Clear Mercury Vapor utilized to create moonlight effects. The module can be retrofitted into existing R40 bullet fixtures, or it can be installed in new construction installations using several brands of Techlight R40 bullet housings. It's primary usage is for tree lighting applications where mounting height requires high lumen output.

The RTB-Q is designed for mounting floodlights and other luminaires to wood utility poles using a right-angle configuration. It is ideal for temporary data center sites and other rapid-deployment environments across the country, where durable, easy-to-install lighting infrastructure is essential. Compatible with most Techlight product families (contact your sales associate for compatibility details).

The high lumen output luminaire is designed to be a replacement for HID and fluorescent high bays. It is optimal for lighting applications where long life, low maintenance, and consistent color rendering is required. Areas with limited accessibility due to fixture location or where heavy pedestrian or vehicle traffic makes maintenance difficult are ideal applications. The high wattage/lumen output allows the fixture to be used for warehouse, manufacturing and big box retail applications.

Retrofit Kits are a great way to modify an existing fixture to save time and energy.

LED Strip Retrofit Kits are a great way to modify an existing fixture to save time and energy. With 50,000 hours of life at L70 standard and a 5-year limited warranty the fixture maintenance cost is reduced substantially over time.

Die cast zinc housing. Offered standard with either a die cast long shield or die cast flush shield.

Made with a die cast aluminum housing with stainless steel fasteners. Designed to efficiently operate PAR38 and R40 lamps. A high temperature drain plug is provided for uplight applications. A sturdy knuckle mount with locknut is provided for a secure installation. ETL listed for wet locations.

The high performance luminaire is designed for full cutoff applications where long life, low maintenance, and consistent color rendering are required. Areas with limited accessibility due to fixture location or where heavy pedestrian traffic makes maintenance difficult are ideal applications such as building facade lighting or wall mounted security lighting. The contemporary design style of the luminaire allows it to be seamlessly integrated into existing systems when necessary.

The Techlight center basket, selectable, troffer includes ability to adjust CCT and Lumen output with the flip of a selector switch. CBS provides impressive appearance and soothing glare diffusion, as well as high efficiency illumination and CCT adjustment, within a single fixture. Adjustments from a warm 3500K to a crisp 5000K, along with full range brightness adjustment. This fixture series allows setting of the ambiance necessary for the application, in one simple step. From welcoming entryways to invigorating office spaces, banks, supermarkets, or even libraries. This 2x4 provides an output range from 4237LM to 6987LM at 29W to 48W, with an efficacy that reaches 162 lm/w.

The pole shaft is fabricated from hot rolled carbon steel having a minimum yield of 55,000 PSI and conforms to ASTM A500 grade C requirements. The shaft construction is two pieces of formed steel welded longitudinally connect by an internal hinge. The hand hole is located 1’ 6" above the pole base. A ground lug is provided standard. Winch ordered separately.

The high performance luminaire is designed for refrigerated environments where the normal operation ambient temperature is below 60°F. The low 1.75” luminaire profile minimizes the chance for luminaire damage due to operational traffic. The luminaire’s sloped walls further help by forcing the contact object to slip under the luminaire.

The LEDH-CFK8 is an 8“ LED, Non-IC Commercial Flat Frame-in Kit and is available with multiple Trim styles. Designed for use in non-insulated ceilings, Insulation material must be kept a minimum of 3” from fixture. Available with a 14W, 23W, 30W or 45W high efficacy LED engine and universal, dimmable drivers. The special optical diffuser produces high lumen transmission and even illumination. Suitable for Wet Locations.

The high performance luminaire is designed for applications where long life, low maintenance, and consistent color rendering are required. Areas with limited accessibility due to fixture location or where heavy traffic makes maintenance difficult are ideal applications such as parking garages, canopy lighting or low bay applications. The traditional design style of the luminaire allows it to be seemlessly integrated into existing systems when necessary.

The FSPENCA277V is designed for use in conjunction with LED Drivers to provide an additional level of protection against powerline disturbances in industrial and commercial applications. Also protects electronic fluorescent and HID ballasts.

The high lumen output luminaire is designed to be a replacement for HID and fluorescent high bays. It is optimal for lighting applications where long life, low maintenance, and consistent color rendering is required. Areas with limited accessibility due to fixture location or where heavy pedestrian or vehicle traffic makes maintenance difficult are ideal applications. The high wattage/lumen output allows the fixture to be used for warehouse, manufacturing and big box retail applications.

The LWW Series Linear LED Wall Wash is designed for illuminating architectural surfaces and commercial signage. Areas with limited accessibility due to fixture location or where heavy pedestrian or vehicle traffic makes maintenance difficult are ideal applications. The low-profile design keeps the fixture placement discrete for both ground and wall mounted applications.

The high performance luminaire is designed for surface mount applications where long life, low maintenance, and consistent color rendering is required. Areas with limited accessibility due to fixture location or where heavy vehicle traffic makes maintenance difficult are ideal applications such as parking garages.

The EB14 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB14 immediately switches to the emergency mode, keeping one lamp illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.

Great for gyms, walk in coolers, parking garages, canopies and other sensitive areas. Suitable for indoor and outdoor applications.

Techlight’s line of high bays was designed for general manufacturing, warehouse, retail, assembly lines, or production environments.

Retrofit Kits are a great way to modify an exsisting fixture to save time and energy.

The TLLET75 and TLLET150 Electronic Low Voltage AC Transformers are ideal for quick installs into bell boxes or existing enclosures. Small projects are made quick and effortless with simple mounting and wiring.

The housing is made of compression molded fiber reinforced polyester composite. The color impregnated SR2 composite will not flake or peal. Multiple ring/guard assemblies are available for a customizable trim finish.

The LWDHB brings the benefits of gasketed enclosures to High Bay and Low Bay applications. Ideal for use in high mounting height environments where dust, dirt, or moisture is present including food processing, cold storage, sports concourses, manufacturing, and industrial.

Low profile recessed Static Luminaries designed for general application and is ideal for restricted plenum spaces. Perfect for commercial office spaces, schools, hospitals or retail merchandising areas. With 50,000 hours of life at L70 standard and a 5-year limited warranty the fixture maintenance cost is reduced substantially over time.

Techlight’s line of high bays was designed for general manufacturing, warehouse, retail, assembly lines, or production environments.

Great for gyms, walk in coolers, parking garages, canopies and other sensitive areas. Suitable for indoor and outdoor applications.

Made with a die cast aluminum housing with stainless steel fasteners. Designed to efficiently operate PAR30 lamps. A high temperature drain plug is provided for uplight applications. A sturdy knuckle mount with locknut is provided for a secure installation. ETL listed for wet locations.