160 manufacturers · 18,987 products

Combining the functionality of a switchpack, a sensor, and a 0-10V dimmer, this convenient wallbox device saves labor costs and reduces installation times. What's more: it meets all the latest energy codes and standards, including Title 24. This model features both ultrasonic (US) and passive infrared (PIR) sensing technologies.

The OSW-P-0801-120 Passive Infrared Single or 3-way Occupancy Sensing Wall Switch is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. For units to sense motion, the person must cross between two segments. The distance between segments increases the farther you are from the sensor, so motion has to be larger the farther you are from the unit. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. In Automatic On Mode, the lights turn ON when a person enters the room. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain ON as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out.

Dual Relay Switchpacks provide 24 VDC operating voltage to all low voltage, 24 VDC, Greengate occupancy sensors and day lighting controllers. These powerpacks can be used where two circuits need to be controlled at the same point. A single switchpack can provide power for up to five sensors. Up to ten switchpacks can be connected to one sensor for control of multiple circuits. Isolated contacts may also be used to control HVAC, contactors, motors, etc.

The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OAC-DT sensors are also equipped with MicroSet self-adjusting technology which provides an adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. MicroSet self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period.

The Multi-load Decorator Dimmer provides full-range classic linear-slide dimming for 300W dimmable LED and CFL as well as 600W Incandescent, Halogen, Dimmable Fluorescent, Electronic Low Voltage & Magnetic Low Voltage light sources. Preset units feature a preset “ON/OFF” switch that automatically returns controlled light(s) to a preset level without disturbing the brightness level. The device is designed for both Single-Pole (one location) and 3-Way (multi-location) applications, and features an adjustable Rapid-Start setting which provides additional power for a brief time period to ensure lamp start-up at low dim settings. Compatible with any decorator wallplate. Compatible with most dimmable LED and CFL lamps. Adjustable rapid start feature ensures lamp start-up even at low dim levels.

The Integrated Sensor programming remotes (ISHH-01 and ISHH-01) are handheld tools to adjust the light level of fixtures controlled by Cooper Lighting’s SVPD-series integrated sensors. The SVPD integrated sensors are standalone integrated sensors, i.e. each luminaire operates independently. The ISHH-01 allows users to turn adjust the light level of a fixture (on/off, raise and dim and preset light levels). It also allows the programmability of occupied and un-occupied scenes as well as the Energy Saver scene. The ISHH-02 only allows the user to control the luminaire light level only, i.e. turning the lights on/off, dim or raise the light level or set the light to one of the preset light levels.

Wallstations are pre-engraved low voltage switches that operate on 24 VDC power supplied by the Room Controller or DLVP power module. Each wallstation is designed to fit in a standard decorator opening and has two QuickConnect ports for local network connections to eliminate wiring errors.

The Lighting Relay Module is available in 347 VAC input voltage. The Lighting Relay Module (LRM) is designed to force all relays in a lighting control panel to an ON or Closed state regardless of the control panel programmed relay status. This allows the closure of relays during loss of normal (grid) power to allow an alternate power source to drive the lighting loads.

The Passive Infrared Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The OEF-P PIR Fixture Mount High Bay/Low Bay Dimming Occupancy Sensor with Integrated Photocell and Two Interchangeable Lenses provides 1-10V control. The OEF-P is easy to program and set for desired 1-100% continuous dimming levels during daylighting. It is also engineered to meet and exceed all standards requirements of ASHRAE Standard 90.1 2010. Provides robust mechanical latching relay. Relay always returns to close after power loss event. UL listed for electronic ballast loads 120/277V.

The OSW-U-0721-MV is a self contained, energy saving, motion-sensing lighting control which replaces a conventional wall switch and utilizes ultrasonic technology to detect room motion. The sensor produces a low-intensity, inaudible sound to detect occupancy in a room. Changes in the sensor’s acoustic wave caused by motion, such as walking into a room, reaching for a telephone or swiveling in a chair, will cause the lights to turn ON. The sensor does not respond to audible sound. Wall switches are ideal for smaller spaces where you will not have obstructions of line-of-sight due to switch location, room orientation or furniture placement.

The Input/Output Device (OCC-RJ45) provides connection of any Greengate low voltage occupancy sensor, or other low voltage maintain closure, to the Room Controller or DLVP power module to define the occupancy state of the space. The OCC-RJ45 also can be used as an output to the HVAC system, third party systems or Switchpacks based upon room occupancy status.

The OSW-P-1001-MV Passive Infrared Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. In Automatic On Mode, the lights turn ON when a person enters the room. In Manual On Mode, the lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as one of the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with Incandescent, LED, Fluorescent, CFL, MLV, ELV or 1/2 HP motor load.

The DSRC-FMOIR is an open loop daylight sensor that measures the natural light contribution in order to automatically adjust the lighting zones. It is part of the Room Controller and DLVP system and provides three easily distinguished light levels, Low (3-300 lux), High (30-3000 lux), and Direct Sun (300-30000 lux). The high light sensor range is selected by default, although this can be adjusted using the IR handheld programmer.

The 0-10 Volt Slide Dimmer provides full-range classic linear-slide dimming for 0-10V compatible dimmable light sources. These units are ideal for light commercial applications and are compatible with decorator style devices and wallplates. The preset “ON/OFF” switch automatically returns controlled light(s) to a preset level without disturbing the brightness level. The device is designed for both Single-pole (one location) and 3-way (multi-location) applications.

The Dual Technology Low Voltage Occupancy Sensing Wall Switch is a motion sensing lighting control that is used for energy savings and convenience and utilizes an isolated form-C relay that integrates directly with lighting control, building, and HVAC systems. The ONW-D-1001-SP combines Ultrasonic and Passive Infrared (PIR) sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings. HVAC mode allows the load connected to the Form C BAS relay to remain ON when the lights are turned OFF manually.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. The ONW-D-1001-MV-N combines Ultrasonic and Passive Infrared (PIR) sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The Room Controller Wallstation Coupler is used when a primary wallstation is needed to control multiple room controller or DLVP units. When the Wallstation Coupler is connected to multiple wallstations, the primary wallstation will override any scene currently selected by any connected wallstation.

Listed for emergency lighting control applications, the RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that emergency fixtures illuminate at full brightness during utility power interruptions. Its small size makes it ideal for junction box or integrated fixture mounting in wireless or other modern control systems. An integral test switch allows for quick testing and verification.

Combining the functionality of a switchpack, a sensor, and a 0-10V dimmer, this convenient wallbox device saves labor costs and reduces installation times. What's more: it meets all the latest energy codes and standards, including Title 24.

The passive infrared Extreme Temperature Sensor provides consistent, stable coverage where extreme heat, cold or humidity must be accommodated, and where there are wide fluctuations in temperature. Temperature compensating circuitry stabilizes sensitivity at temperatures –40°F to 125°F (-40°C to 52°C). Ambient light control circuit to avoid False ON/OFF from brief changes in background light. Lighting sweep function with selectable DIP Switch prevents unnecessary “lights ON” following power sweeps in facilities with computer control systems

The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OMC-DT sensors are also equipped with MicroSet self-adjusting technology which provides an adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. MicroSet self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period. Available as Buy American compliant.

The Dual Technology Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-DMV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OAWC-DT sensors are also equipped with MicroSet self-adjusting technology which provides an adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. Self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period. Manual On feature for use with 1 or 2 momentary switches controlling 1 or more Switchpacks.

The Passive Infrared (PIR) Single Relay Vacancy Sensing Wall Switch with Night Light is a lighting control and wall switch all-in-one that is used for energy savings and convenience. VNLW-P-1001-MV-N is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. The night light activates when the sensor turns the lights OFF. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Passive Infrared Low Voltage Occupancy Sensing Wall Switch is a motion sensing lighting control and that is used for energy savings and convenience. The wall switch that utilizes an isolated Form-C relay that integrates directly with lighting control, building, and HVAC systems. The ONW-P-1001-SP is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings. HVAC mode allows the load connected to the Form C BAS relay to remain ON when the lights are turned OFF manually.

The TSW-MV is ideal for conformance to energy codes where assurance is needed that lights are turned OFF when not in use and an occupancy sensor is not the best application.

The Forward Power Dimmers are system accessories for Cooper lighting control systems. It allows dimming control of 2 or 3-wire loads via 0-10V control signals. Each module includes a backbox, heatsink, temperature sensor to monitor operating temperature.

The RCPC is ideal for coordinating lighting and wallstation functions across multi-use spaces that are configured or designed with moveable walls. Applications include expandable school rooms, gymnasiums, hotel conference centers, meeting rooms, ballrooms, multi-use rooms and other spaces with movable walls.

Scene wallstations are pre-engraved low voltage switches that operate on 24 VDC power supplied by the Room Controller or DLVP power module. Each scene wallstation is designed to fit in a standard decorator opening and has two QuickConnect ports for local network connections to eliminate wiring errors. Scene wallstations are Click & Go ready and work immediately upon power up. Click & Go scene wallstations are fully functional out-of-the-box but can be customized to meet your needs using the Room Controller Personal Remote to adjust and save the scene settings.

The Remote Relay Unit (RRU) provides 120 or 277 VAC input voltage configurations. The RRU is designed to force all outputs in the lighting control panel to an emergency scene regardless of the control panel programmed output status. This allows the override of outputs to full bright during loss of normal (grid) power to allow an alternate power source to drive the lighting loads. Once the RRU senses the normal power returning, the control panel will return to the normal programmed operating mode.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-MV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

Cooper Lighting Solution's RRU-X-UNV includes a 20A rated high voltage Form C (N/O+N/C) relay and a low voltage Form A (N/O) relay and is UL924 Listed for emergency lighting control applications.The RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that an emergency fixture illuminates at full brightness during a utility power interruption. Its small size makes it ideal for junction box mounting or integrated fixture mounting in wireless or other modern lighting control systems. An integral test switch and LED allow for quick testing and verification of proper function.

1200VA, 120/277 Volt AC 60Hz, Single-Pole & 3-Way, WBSD-010M-C1 Preset Electro-Mechanical Electronic 0-10VDC Fluorescent Slide Dimmer, 0-10VDC LED Power Supply Dimmer, Suitable for use with Class 1 or Class 2 wiring - White face assembled on device, Ivory and Light Almond color change kits included. The WBSD-010M-C1 can control a load directly or connect to the SP20-RD4 as a manual pushbutton to toggle the load.

The VSW-P-0801-120 Passive Infrared Single or Multi-way Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. The VSW-P-0801-120 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with incandescent, LED, fluorescent, CFL, MLV, ELV or 1/6 HP motor load.

The Momentary Decorator Switch is a system accessory for the Greengate Lighting Control System. This switch is recommended for most low voltage switching applications and fits a standard decorator wallplate. The Momentary Decorator Switch is a low voltage contact closure device used with Greengate Lighting Control Panels and Occupancy Sensors. When toggled, the switch momentarily makes a contact closure to the lighting control panel or occupancy sensor, sending an “ON” signal. When not pressed, the switch is in the (open) position.

The Momentary Toggle Switch is a low voltage contact closure switch used with Greengate Lighting Control Panels. When toggled up or down, the switch momentarily makes a contact closure to the lighting control panel, sending an “On” signal and has a center “Off” position. These switches have 0.050” (1.27mm) zinc-plated thick steel mounting straps for corrosion resistance and the combination slot/Phillips head mounting and terminal screws make for ease of installation.

Fifth Light’s Relay Panel provides scalable and modular On/Off control over a lighting panel as part of a DALI system for convenient control of multiple On/Off loads.

The Field Relay provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The Digital Wallstation offers the specification grade range of wallstations, which combines the easiest user interface in the industry with a large circular On/Off button, a universal module with up to 10 button configurations, large or small button options and engraving. Designed to fit with standard decorator wallplates, Wallstations can be ganged together to meet specific project needs. Individual buttons have backlight indicator lights and strong tactile feedback.

The Fifth Light Sensor Powerpack provides power to low voltage sensors and communicates occupancy data status to the Fifth Light system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.

The Multi-Sensor (OCS-D-P06 / OCS-D-P12) combines daylight sensing and occupancy detection into a single device. The Multi-Sensor communicates over the two wire communication bus and allows for all device settings and groups to be adjusted remotely.

The BACnet Integration Module allows Evenlite inverters to become part of the Building Management System via the facility's existing BACnet network.

The Remote Test Switch and Monitor option allows the user to fully monitor the status of the sine wave inverter from a remote location. The user can now locate the inverter away from public areas in schools or other public access buildings where there may be a concern with unauthorized entry to the system.

Tufflite SCHL is a Chicago Approved Steel LED Emergency Unit featuring LVD (low voltage disconnect) and internal solid-state transfer switch.

Evenlite’s emergency lighting control device ELCD 1008 is a UL-listed, Branch Circuit Emergency Lighting Transfer Switch (BCELTS) which transfers AC power between two non-synchronous power sources (emergency and normal) to the emergency lighting loads

UL924 Enclosed Lighting Relay, 20 Amp SPST, 120-277 Vac Coil Input.

Mechanically Latching Relay, 20 Amp SPST + True Override Switch, 24 Vac/dc Coil Input

Mechanically Latching Relay, 20 Amp SPST, 24 Vac/dc Coil Input

UL924 Relay, 10 Amp SPDT, 120 Vac Coil Input, Switched Utility Detection

UL924 Relay, 20 Amp SPDT, 24 Vac/dc/208-277 Vac Coil Input

Closet Light Controller, 10 Amp SPST, Class 2 Dry Contact Input, 120-277 Vac Power, 60-Minute Time Out Setting

Mechanically Latching Relay, 20 Amp SPST, 24 Vac/dc Coil Input, Status LED and Auxiliary Output

Mechanically Latching Relay, 20 Amp SPST + True Override Switch, 12 Vac/dc Coil Input

Mechanically Latching Relay, 20 Amp SPST, 12 Vac/dc Coil Input, Status LED and Auxiliary Output

Mechanically Latching Relay, 20 Amp SPST, 12 Vac/dc Coil Input

EnOcean® Enabled 902 MHz Wireless Keycard Transmitter Switch

EnOcean® Enabled 902 MHz Wireless Wall Switch with Barrier and Cover Plate, White

UL924 Relay, 10 Amp SPDT, 277 Vac Coil Input, Switched Utility Detection

Momentary Test Button for Use with Models ESRB and ESRN