160 manufacturers · 18,987 products

Halo Roundback Cylinder lampholders utilize a variety of lamps. Lampholders are yoke mounted and are available in satin white and matte black finishes. Models come in both low and line voltage and also offer optional barn doors, color filters, optical lenses and baffles. Halo Roundback lampholders are compatible with all Halo Power-Trac systems. Ideal for accent and display lighting applications where high coloring rendering and precise beam control are required.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. The L942 Flexible Connector simply pushes into the ends of the track, eliminating splicing. To ensure safe operation the entire track, system is fully polarized and grounded.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

Halo Step Cylinder lampholders come in both line voltage and low voltage models and are available in white or black finish. They are for use with Halo, Power-Trac and Lazer-by-Halo track systems. Lamps supported include R, PAR, A and BR types and several models offer color filters and lens accessories.

The Bachetta series of lampholders offers the beauty and functional design that sophisticated spaces require. The Bachetta family includes lampholders that support 12V MR16 and PAR30/38 lamps. The light weight and small size of this lampholder family makes them ideal for use in museums, galleries, malls, exhibits and similar areas where high interior light is needed. Trim options include color filters, optical lenses and baffle.

Halo Compact Fluorescent Wall Wash is a lampholder designed for use with two energy efficient twin and triple tube compact fluorescent lamps in 18W, 32W, 39W, 40W, 50W, and 55W. The fixture is designed for use with Halo and Lazer-by-Halo track systems. Ideal for wall washing in retail stores, public areas and other commercial spaces. Wall wash Fixtures are used to create architectural interest, add spatial dimensions of the interior, and enhance wall surface textures.

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. Use the Two Circuit Mini Joiner to connect two straight track section where a feed point is not necessary.

Halo Raceway Trac provides electrical flexibility at a fraction of the cost of conventional wiring on long linear runs. This Economical single-circuit raceway track is the most versatile track system on the market. Top portion of track is designed as a raceway - it will carry up to 6 #12 AWG conductors. Raceway can be used to feed additional sections of track from the original feed point, minimizing installation time and cost. L's, T's and X's allow track to be assembled in almost any pattern.

The Gimbal series of lampholders is designed for use with Halo Linea and Lazer track Systems and utilizes standard PAR and halogen PAR lamp technology. Front loading of the lamp allows ease of relamping. Available in white, black or silver finish. Ideal for accent and dramatic display applications. Trim options include color filters, optical lenses, barn door, louver and baffle.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

With sleek simple lines, numerous beam distributions and color temperatures, and all-encompassing light output levels, Stasis gives the flexibility to create spaces that draw clout, foot traffic, sales and good reviews.

Halo Gimbal lampholders are designed for use with Halo Power-Track and Lazer-by-Halo track systems. Halo Gimbal lampholders utilize standard PAR and halogen PAR lamp technology. Front loading lamp design allows for ease of relamping. They are available in white or black finish and are ideal for accent and display lighting applications.

The ALTO series of lampholders offers the beauty and functional design that sophisticated spaces require. The ALTO family includes lampholders in a range of sizes that accept a number of lamp types and sizes. For use with single and two circuit Halo and Lazer-by-Halo track systems. The light weight and small size of this lampholder family makes them ideal for use in museums, galleries, malls, exhibits and similar areas where high interior light is needed.

Versatility has always been the hallmark of track lighting. The modular construction of track and the adjustment capabilities of the trackheads allow the ability to place light exactly where needed and to easily adapt to changing display needs.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

Halo Step Cylinder lampholders are designed for R, PAR, A and BR lamps. Lampholders are available in satin white and black and polished brass finishes. These lampholders are compatible with all Halo Power-Trac systems. Ideal for accent and display lighting applications where high coloring rendering is required. Lampholders include baffles and are available in a variety of finishes. Lazer lampholders are compatible with all Halo Power-Trac systems.

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

Halo Compact Fluorescent Wall Wash is a lampholder designed for use with two energy efficient twin and triple tube compact fluorescent lamps in 18W, 32W, 39W, 40W, 50W, and 55W. The fixture is designed for use with Halo and Lazer-by-Halo track systems. Ideal for wall washing in retail stores, public areas and other commercial spaces. Wall wash Fixtures are used to create architectural interest, add spatial dimensions of the interior, and enhance wall surface textures.

This Universal lampholder family from Halo provides a broad range of clean, stylish lighting. The specialized accessories make possible a customized lighting effect and lampholder look. Lampholders are offered in a symmetrical and an asymmetrical version and are for use with Halo, Power-Trac and Lazer-by-Halo track systems.

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. Use the X connector to join four sections of track into a cross configuration.

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. The Two Circuit Live End Connector is used to start a Trac run.

Power-Trac Transformer. Allows use of Linea track fixtures and pendants on Halo Power-Trac or Lazer Track Finishes.

Live-end feed for HTEK4 two-circuit / two neutral 277V 20 Amp track. Multiple breaker sizes are available. Can be utilized on hard or grid ceilings. Can be used with pendant suspended track. Breaker can be used as an on-off switch. Approved by the California Energy Commission - meets Title 24 requirements. cULus Listed.

These Wall Washer lampholders feature a cylindrical scoop design that provides broad uniform illumination. Models support R30 and R40 or PAR38 lamps. They are certified for use with Halo and Lazer-by-Halo track and track systems.

The durable HALO 808 High Performance offers reliable, low-glare, high-power beam performance for accent and display lighting. Featuring high-efficiency LED technology with precision aluminized reflector optics, the 808 delivers energy-saving economical accents to modern spaces. The 808 was engineered to provide exceptional lighting with up to 3,350 lumens and over 35,700 candela of beam power. The beam distribution can also be customized with media, supporting up to two pieces with the media snoot.

Halo Gimbal lampholders are designed for use with Halo Power-Track and Lazer-by-Halo track systems. Halo Gimbal lampholders utilize standard PAR and halogen PAR lamp technology. Front loading lamp design allows for ease of relamping. They are available in white or black finish and are ideal for accent and display lighting applications.

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

Halo Roundback Cylinder lampholders utilize a variety of lamps. Lampholders are yoke mounted and are available in satin white and matte black finishes. Models come in both low and line voltage and also offer optional barn doors, color filters, optical lenses and baffles. Halo Roundback lampholders are compatible with all Halo Power-Trac systems. Ideal for accent and display lighting applications where high coloring rendering and precise beam control are required.

Halo Roundback Cylinder lampholders utilize a variety of lamps. Lampholders are available in White and Black finishes. Halo Roundback lampholders are compatible with all Halo Power-Trac systems and are ideal for accent and display lighting applications where high coloring rendering and precise beam control are required.

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. Join three trac sections with left hand polarity with the Left T Connector.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

The Bachetta series of lampholders offers the beauty and functional design that sophisticated spaces require. The Bachetta family includes lampholders that support 12V MR16 and PAR30/38 lamps. The light weight and small size of this lampholder family makes them ideal for use in museums, galleries, malls, exhibits and similar areas where high interior light is needed. Trim options include color filters, optical lenses and baffle.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

Halo Roundback Cylinder lampholders utilize a variety of lamps. Lampholders are available in White and Black finishes. Halo Roundback lampholders are compatible with all Halo Power-Trac Systems and are ideal for accent and display lighting applications where high coloring rendering and precise beam control are required.

HALO offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and track adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers.

This Universal lampholder family from Halo provides a broad range of clean, stylish lighting. The specialized accessories make possible a customized lighting effect and lampholder look. Lampholders are offered in a symmetrical and an asymmetrical version and are for use with Halo, Power-Trac and Lazer-by-Halo track systems.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

This Universal lampholder family from Halo provides a broad range of clean, stylish lighting. The specialized accessories make possible a customized lighting effect and lampholder look. Lampholders are offered in a symmetrical and an asymmetrical version and are for use with Halo, Power-Trac and Lazer-by-Halo track systems.

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

Live-end feed for TEK4 two-circuit / two neutral 120V 20 Amp track. Multiple breaker sizes are available. Can be utilized on hard or grid ceilings. Can be used with pendant suspended track. Breaker can be used as an on-off switch. Approved by the California Energy Commission - meets Title 24 requirements. cULus Listed.

The Gimbal series of lampholders is designed for use with Halo Linea and Lazer track Systems and utilizes standard PAR and halogen PAR lamp technology. Front loading of the lamp allows ease of relamping. Available in white, black or silver finish. Ideal for accent and dramatic display applications. Trim options include color filters, optical lenses, barn door, louver and baffle.

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

Versatility has always been the hallmark of track lighting. The modular construction of track and the adjustment capabilities of the trackheads allow the ability to place light exactly where needed and to easily adapt to changing display needs and retail and hospitality configurations.

Halo Step Cylinder lampholders come in both line voltage and low voltage models and are available in white or black finish. They are for use with Halo, Power-Trac and Lazer-by-Halo track systems. Lamps supported include R, PAR, A and BR types and several models offer color filters and lens accessories.

The Gimbal series of lampholders is designed for use with Halo Linea and Lazer track Systems and utilizes standard PAR and halogen PAR lamp technology. Front loading of the lamp allows ease of relamping. Available in white, black or silver finish. Ideal for accent and dramatic display applications. Trim options include color filters, optical lenses, barn door, louver and baffle.

Halo Roundback Cylinder lampholders utilize a variety of lamps. Lampholders are available in White and Black finishes. Halo Roundback lampholders are compatible with all Halo Power-Trac Systems and are ideal for accent and display lighting applications where high coloring rendering and precise beam control are required.

These Wall Washer lampholders feature a cylindrical scoop design that provides broad uniform illumination. Models support R30 and R40 or PAR38 lamps. They are certified for use with Halo and Lazer-by-Halo track and track systems.

With sleek simple lines, numerous beam distributions and color temperatures, and all-encompassing light output levels, Stasis gives the flexibility to create spaces that draw clout, foot traffic, sales and good reviews.

ITLP20

ITLP30