160 manufacturers · 18,987 products

The LITE Industrial Fixture Mount High / Low Bay Sensors (WIK-WH / WIM-WH) are an integral part of the WaveLinx LITE system and offer passive infrared (PIR) occupancy and a photocell for closed loop daylighting. WaveLinx industrial sensors offer installation heights up to 45 feet and have coverage patterns up to 5000 square feet (see sensor specifications - field of view). When part of the WaveLinx LITE system, the sensor operates on a wireless mesh network based on IEEE 802.15.1 standards. The sensors offer simple tool-less integration into WaveLinx industrial light fixtures equipped with the 4-pin Zhaga Book 18 compliant socket. Once installed, sensors receive power from their co-located light fixture with no batteries to replace. The sensor in combination with the WaveLinx LITE Mobile application allows you to gain considerable energy savings from occupancy and daylight sensing lighting control. The WaveLinx LITE Mobile application allows you to map the sensor to any area or control zone, select occupancy or vacancy, occupied and unoccupied light levels and set the hold time.

CORE Locate delivers real-time indoor location service and management by leveraging the CORE smart space IoT platform. It's designed to let you monitor activities by sensing the location of your assets, so staff and patients can use the data to make improvements. Among them: optimized business/production workflows, enhanced safety and heightened security.

The WaveLinx DALI-2 Occupancy & Daylight Ceiling Sensor (OCS-D2-P06 / OCS-D2-P12) combines daylight sensing and occupancy detection into a single device. The Multi-Sensor is powered & communicates over the two wire DALI-2 communication bus and allows for all device settings be adjusted remotely via WaveLinx software apps.

The WaveLinx Wired Network Communication Cable (LCCP / LCCNP) is used to interconnect Source Controllers and peripheral devices. The cable provides one 18AWG wire pair to deliver power to peripherals and one 22AWG twisted and shielded wire pair to carry data transmissions. Both non-plenum (LCCNP) and plenum rated (LCCP) versions are available.

CORE Public REST API (TRX-API) provides a secure programming interface that enables third-party partners to obtain real-time data from WaveLinx controlled spaces as well as Cooper Lighting Solutions BLE tags. Partners can then use the data to offer value-added solutions that improve business processes and tenant experiences. The CORE Public API interface is hosted on the CORE Core appliances.

The WaveLinx Wired iCANnet to PC Interface (SW-3-NA) provides an interface between an WaveLinx Wired network and a computer running WaveLinx Wired configuration software. This compact versatile unit can be mounted virtually anywhere. The SW-3 includes a PC-NODE, Network Connection Card, phone style connection cable.

The WaveLinx Wired Forward Phase to ELV Power Extender (PE400-1) allows a dimmers power handling capacity to be extended to a full 1000W/VA on 120V input power. It allows a dimmer to dim or switch a fully loaded circuit of electronic low voltage and incandescent loads only.

The WaveLinx Wired Universal Interface Module - Mini (UIM-NA) is a network powered universal interface with six configurable inputs. It can be dry contact closure for scene selection. 1.7" diameter potted PCB with 8" flying leads, designed to fit standard junction boxes and ideal for connection to push buttons, dry contact switches and rocker switches. Does not include LED feedback status indicators.

The WaveLinx Wired Field Relay (FRS-DA) provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The WaveLinx Wired Universal Source Controller, Feed Through (SC-UN-FT) lighting control panel provides feed-through wiring flexibility for both new and existing applications. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, and real-time individual dimmer power metering. Constant live feed per dimmer, for battery powered emergency lighting.

The WaveLinx Touchscreen Wall Controller (TSE57) provides an elegant and discreet light control for any WaveLinx controlled space. The portrait-oriented 5.7” (14.5cm) touchscreen features a low-profile design with edge to edge glass and an extremely responsive display making it a great architectural addition to conference rooms, executive offices and open spaces.

The WaveLinx LITE Battery-Powered Wallstation (WWBL-Series), provides wireless control of the lighting in an area, is available in small and large button configurations, and is fully configurable to provide local control in each area. They provide default sequence of operations including 50% light level, scene light levels between 30-70% as well as 100% and full off. They mount in a standard wallbox (single or multi-gang) suitable for use with standard wall plates (not included).

The WaveLinx Wired Lighting Control Network Jack (LCNJ) is a system accessory to the WaveLinx Wired Lighting Control System. This device allows access to the WaveLinx Wired network while in the space where the lighting levels are being modified. It is preferred to be in the space being modified when setting and saving light levels to create different moods/atmospheres.

CORE Locate delivers real-time indoor location service and management by leveraging the CORE smart space IoT platform. It's designed to let you monitor activities by sensing the location of your assets, so staff and patients can use the data to make improvements. Among them: optimized business/production workflows, enhanced safety and heightened security.

The PRO Ceiling Sensor (CWPD-1500), a room based wireless sensor is an integral part of the WaveLinx System and offers Passive Infra Red (PIR) occupancy sensing. They have coverage patterns up to 1500 square feet. The room based sensor is battery powered and is one of the smallest ceiling mounted room based wireless occupancy sensors on the market. The sensor operates on a wireless mesh network based on IEEE 802.15.4 standards.

The WaveLinx CAT Contact Closure Input Module (CCI-C-V) is a low-voltage device that interface and provides network addressability for a variety of devices outside the WaveLinx network. The CCI module behaves as an input device that detects a maintained or momentary dry contact closure switch. The CCI module offers four dry contact inputs, that are momentary and/or maintained.

The CAT Sensor Interface Module (SIM-C-V) is a low-voltage device that provides network addressability for low voltage occupancy ceiling sensor such as low voltage Greengate Occupancy Sensor. The CAT Sensor Interface Module communicates with other CAT devices, via CAT5e cable, through its two RJ-45 connectors. The module is powered by the CAT bus power and comes with mounting tabs for easy installation on the wall or a junction box. The CAT bus power is used to power up to X Greengate occupancy sensors. The CAT Sensor Interface Module detects a maintained dry contact closure from the Greengate sensor and sends the occupancy status data to a CAT Dimming Switchpack to turn on/off a group of light fixtures.

The WaveLinx PRO Mobile App from Cooper enables users to perform setup, configuration and maintenance of the WaveLinx system from a wireless smartphone or tablet. The WaveLinx Mobile App simplifies setup and configuration of the WaveLinx Wireless Connected Lighting (WCL) system, utilizing our patent pending automatic code commissioning features. It allows users who perform the setup to easily define Areas of the building and drag and drop compatible WaveLinx wireless devices into lighting zones in each area. The automatic code commissioning feature automatically applies a code compliant sequence of operations to each WaveLinx device as they are dropped into a lighting zone in an area. It also allows a user performing setup to make site specific energy code compliant adjustments to the automatic code commissioning settings.

The DMX light controller Output Interface (SCD96-NA) can control virtually any standard DMX device such as RGB fixtures, moving lights, dimmers, and effects. This unit provides DMX output that tracks 96 channels in the WaveLinx Wired system. These allow lighting sources that use DMX as the control signal to be used as part of the WaveLinx Wired system. This compact unit can be mounted virtually anywhere.

The WaveLinx Wired Digital Wallstation (FDW) offers the specification grade range of wallstations, which combines the easiest user interface in the industry with a large circular On/Off button, a universal module with up to 10 button configurations, large or small button options and engraving. Designed to fit with standard decorator wallplates, Wallstations can be ganged together to meet specific project needs. Individual buttons have backlight indicator lights and strong tactile feedback.

The CLS Wallstation is the new standard in intuitive layout and operation with a large circular On/Off button, an universal module with up to 10 button configurations and custom engraving. Each button has a backlight indicator light and offers users with strong tactile feedback. Designed to fit with standard decorator wallplates, CLS Wallstation can be ganged together to meet all project needs.

The WaveLinx Wired Sensor Powerpack (FLT-SP) provides power to low voltage sensors and communicates occupancy data status to the WaveLinx Wired system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.

The CORE Locate Application (TRX-LOCBAS) is an intuitive, web-based, real-time location application that allows authorized user to locate and manage their assets within their spaces. Once indoor positioning specialists use the Locate application to configure the system, users can manage assets and locate their positions in real-time. CORE Locate application and associated services are hosted on CORE Core (Pro, Enterprise and Virtual) appliances.

Create a smart building ecosystem with convenient, out-of-the-box functionality. The WaveLinx Area Controller, 2nd Gen (WAC2) is the main component of the WaveLinx Connected Lighting System, coordinating between the WaveLinx mobile app and your WaveLinx-enabled fixtures and devices. It's remarkably simple to set up and program (without the need for an IT network). Patent-pending code commissioning features also reduce commissioning times by 40%. This 2nd Generation of the WaveLinx Area Controller allows for a more extensive coverage area with its increased performance, including the support of up to 200 devices, and up to 50 areas resulting in up to 2.5% BOM cost reduction.

CORE Locate delivers real-time indoor location service and management by leveraging the CORE smart space IoT platform. It's designed to let you monitor activities by sensing the location of your assets, so staff and patients can use the data to make improvements. Among them: optimized business/production workflows, enhanced safety and heightened security.

To ensure optimal performance of the WaveLinx CAT network, the terminator plug is an essential accessory. It is necessary to terminate the local CAT bus network on both ends. One of the RJ45 connectors on the end device should have a terminator plug installed. Either one of the two RJ45 connectors can be used.

The PRO Tilemount Sensor Kit (WTA) provides PIR occupancy, daylight dimming and control for connected downlight luminaires or other luminaires that do not support the WaveLinx Integrated Sensor. The Tilemount Sensor Kit provides 0-10V dimming control of LED and non LED loads for 120-277V 3 amp luminaires.

The WaveLinx LITE Industrial Sidecar Sensor Kit (WIM-WH-SKIT) is an integral part of the WaveLinx Lite Connected Lighting System and offers 120-277VAC 6-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx LITE Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The PRO Outdoor Fixture High / Low Mount Sensor (SWPD*) offers passive infrared (PIR) occupancy with a photocell for closed loop daylight sensing. The sensors are IP66 rated for outdoor site and indoor environments with installation heights up to 40 feet and coverage up to 5000 square feet. Easy tool-less fixture connection (Zhaga Book 18 socket) with out of the box controls functionality. Available color options: white, black and bronze.

The WaveLinx DALI-2 Wallstation offers an intuitive layout and operation with a large circular On/Off button, a universal module with up to 8 different configurations, large or small button, color, and engraving options. Designed to fit with standard decorator wallplates, the Wallstation can be ganged together to meet specific project needs. Individual buttons have backlight indicator lights and strong tactile feedback.

The WaveLinx PRO Industrial Sidecar Sensor Kit (SWPD*-WH-SKIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The WaveLinx CORE Pro (TRX-TCPRO2) is an on-premises hardware platform that hosts the CORE Smart Spaces IoT Platform software applications. The CORE software application provides enterprise-level functionality for WaveLinx Connected Lighting system users. It captures critical system data such as devices status, devices present value, areas power consumption from networked of up to 20 WaveLinx Area Controllers for improved maintenance and operational savings. The collected data can be shared with third-party systems via BACnet IP and Public API (REST). The application also offers user management, security management, alarms and events management and system backup functions.

The WaveLinx Wired DIN Rail Network Bridge (BN2-D-NA) is a DIN rail mounted bridging module that allows 2 or more WaveLinx Wired iCANnet® network segments to be connected together or arranged logically into floors or areas for ease of management. The bridge is also used to extend the network as a repeater where more than 500m of cabling is required or more than 100 network devices are used on one segment. BN-2-D also allows network messages to be filtered to ensure optimal performance in large networks.

The WaveLinx CORE Virtual Enterprise (TRX-TCVRT2) provides a virtualized version of the CORE Virtual Enterprise that hosts the CORE Smart Spaces IoT Platform software applications. The CORE software application provides enterprise-level functionality for WaveLinx Connected Lighting system users. It captures critical system data such as devices status, devices present value, areas power consumption from networked of up to 20 WaveLinx Area Controllers for improved maintenance and operational savings. The collected data can be shared with third-party systems via BACnet IP and Public API (REST). The application also offers user management, security management, alarms and events management and system backup functions.

The WaveLinx DALI Field Relay (FRS-DA) provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The WaveLinx Wired Universal Source Controller (SC-UN) lighting control panel sets a new standard in architectural lighting control. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, real-time individual circuit power metering and Phase Sense technology designed to ensure control even during individual phase failure.

The WaveLinx PRO Industrial Fixture Mount High / Low Bay Sensors (SWPD*) offer passive infrared (PIR) occupancy with a photocell for closed loop daylight sensing. The sensors are IP66 rated for warehouse, manufacturing and industrial spaces with installation heights up to 40 feet and coverage up to 2500 square feet. Easy tool-less fixture connection (Zhaga Book 18 socket) with out of the box controls functionality.

The WaveLinx CORE Enterprise (TRX-TCENT2) is an on-premises hardware platform that hosts the CORE Smart Spaces IoT Platform software applications. The CORE software application provides enterprise-level functionality for WaveLinx Connected Lighting system users. It captures critical system data such as devices status, devices present value, areas power consumption from networked of up to 300 WaveLinx Area Controllers for improved maintenance and operational savings. The collected data can be shared with third party systems via BACnet IP and Public API (REST). The application also offers user management, security management, alarms and events management and system backup functions.

The WaveLinx Wired TSE Touchscreens (TSE55-B / TSE80-B) provide an elegant and customizable user control to any WaveLinx Wired controlled space. The LCD capacitive 5.5” or 8” screens provides virtually limitless flexibility of system configuration and control. The user interface can be personalized using the Touchscreen Designer software to suit the needs of the user. Background images can be quickly applied using the browse function and virtual buttons positioned at any point with a simple ‘drag & drop’ action.

WaveLinx Wired Configuration Software (SOFT-ILP) includes a set of applications and tools that facilitate the setup, configuration, performance tuning and management of WaveLinx Wired Area Controllers and Source Controllers and their associated devices.

CORE Insights App (TRX-INSOCC) is a Space Analytics software application that allows users to monitor, compare and analyze their space usage to increase workplace effectiveness. It gives you dashboards to visualize space occupancy information in real-time and historical time ranges.

The CORE Mechoshades Interface (TRX-SHADES) allows specifiers to achieve a consistent design aesthetic within the space by using the WaveLinx Pro wallstations to control both shades managed by Mechoshades system and lights managed by WaveLinx system.

The LITE Wireless Tilemount Sensor Kit (WTK) is an accessory to the WaveLinx LITE (WLC) system which may be used with out-of-the-box functionality or commissioned via the WaveLinx LITE mobile application. The wireless tilemount sensor kit is typically used to provide occupancy sensing and daylight dimming for luminaries that cannot include integrated occupancy and daylight sensors.

WaveLinx PRO Integrated Components are available to allow luminaire manufacturers to incorporate WaveLinx Integrated Sensors into their lineup to support WaveLinx project sales. WaveLinx integrated sensor luminaires are an integral of the WaveLinx Wireless System providing motion detection, daylighting, and wireless radio with each having out of the box functionality.

The WaveLinx Unmanaged Network Switch with 8 PoE+ ports (GS308PP) provides power and data from a single CAT-5 or 6 cable to devices such as WaveLinx Area Controller and WaveLinx Touchscreen.

The PRO Battery-Powered Wallstation (WWB-Series) is a wireless, battery-powered wallstation with configurable buttons featuring on/off, raise lower, and preset scenes options. Each button’s actions are configurable using the WaveLinx app. The PRO WWB-Series Wallstation’s elegant design enhances the aesthetic of a space while allowing occupants to adjust the room’s brightness levels based on their sensitivity and needs. The in-wall wallstation can be installed in a single-gang or multi-gang junction box. The wallstation uses a 2.4 GHz IEEE 802.15.4 standard based radio to form a wireless and reliable mesh network with other PRO devices and WaveLinx Area Controller.

The WaveLinx Wired Recessed Combination Sensor (NS3-C-NA) can be connected directly to the iLumin Network via CAN terminals. It features three functions: PIR motion detection, daylight measurement and an infrared (IR) receiver. All three functions may be programmed within the iLumin software according to specific user needs. This sensor features a coverage of up to 27.8 ft (8.5m) diameter depending on installation height with PIR detection optimized for slight motion for superior performance. The PIR feature may be set in Manual or Automatic On with a custom time-out setting. The daylight feature is used to set light levels where daylighting is required. In Operational Mode the infrared receiver may select Scenes, turn lighting ON/OFF and adjust levels locally with the iLumin IR Handheld Remote (HH17IR). The NS3-C sensor’s combined features ensure maximum energy savings as well as great flexibility for the user.

The WaveLinx LITE Switchpack (RSP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The powerpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. The Switchpack integrates into the LITE system by forming a mesh networking while communicating with other LITE devices using Bluetooth protocol.

The WaveLinx Wired ILS Area Controller with Adaptive Dimming (ILS-SCMA0401) comes with one, two or three SCMA-0401 modules. Each SCMA0401 module offers four adaptive (forward and reverse phase) dimming channels and one iCAN communication interface.

CORE Locate delivers real-time indoor location service and management by leveraging the CORE smart space IoT platform. It's designed to let you monitor activities by sensing the location of your assets, so staff and patients can use the data to make improvements. Among them: optimized business/production workflows, enhanced safety and heightened security.

CORE OpenADR Interface (TRX-OPNADR) allows WaveLinx users to take advantage of utility company incentives by participating in ongoing Demand Response (DR) programs. The CORE OpenADR interface is able to automatically retrieve live power demand information from the utility company and automatically activate load shed profiles according to pre-configured user settings.

The PRO Wallstation (WW-Series) is a wireless, 120/277 VAC powered wallstation with configurable buttons featuring on/off, raise lower, and preset scenes options. Each button’s actions are configurable using the WaveLinx app. The PRO WW-Series Wallstation’s elegant design enhances the aesthetic of a space while allowing occupants to adjust the room’s brightness levels based on their sensitivity and needs. The wallstation uses a 2.4 GHz IEEE 802.15.4 standard based radio to form a wireless and reliable mesh network with other PRO devices and WaveLinx Area Controller.

WaveLinx DALI panels integrate DALI-2 certified drivers (DT6 and DT8) and peripherals into the WaveLinx lighting control. Available in three sizes with up to six DALI-2 hubs, they feature factory pre-wiring, LED diagnostics, and mobile app commissioning. Ideal for small to large projects, WaveLinx DALI ensures flexibility, easy installation, and seamless integration with other technologies (like WaveLinx CAT and PRO) v WaveLinx Area Controller.

WaveLinx Wired is your wired solution for high complexity lighting control specifications, including energy management, architectural and DMX control within a single system. The WaveLinx Wired IL Area Controllers (ILS / ILM / ILL) feature modular design control panels with digital, 0-10V dimming, relay modules, bridge interface, and ethernet gateway.

CORE Locate delivers real-time indoor location service and management by leveraging the CORE smart space IoT platform. It's designed to let you monitor activities by sensing the location of your assets, so staff and patients can use the data to make improvements. Among them: optimized business/production workflows, enhanced safety and heightened security.

The PRO Battery-Powered Wallstation (WB-Series) is a multi-scene, single area dimming wallstation which provides customized light level for each area. The wallstation is available in four hardware configurations with multiple engraving options including generic SCENE versions. The wallstation is easily programmed though the WaveLinx mobile application.

Securely create, set up, and maintain lighting controls projects from mobile device. The mobile app provides Android™ and Apple® users a cloud connection to initiate new projects with up to 28 unique areas per project site. and automatic features like occupancy or vacancy mode, sensor sensitivity, daylight dimming calibration, etc. Additionally, the app’s connection to the cloud portal offers a secure method for site access to be transferred if the installer were not the owner / occupant.

The WaveLinx PRO Tilemount Sensor Kit Without Control Module (WTE) provides motion sensing, daylight dimming and real-time location data. The external plenum rated power supply, WLX-PS-SENSOR, can be used to power the WaveLinx Wireless Tilemount Sensor Kit and the low voltage power supply can power up to 16 sensors. Multiple pre-terminated plenum-rated cable options are also available to simplify the wiring.

The WaveLinx Wired Universal Interface Module (UIG-2-NA) provides a cost-effective interface between the WaveLinx Wired system and other control systems. The UIG-2-NA can be programmed to perform partitioning functions in the WaveLinx Wired network. When used in a partitioning application, one UIG-2-NA can support up to four different zones. Each zone can contain up to 3 partitions (4 consecutive rooms).

CORE Locate delivers real-time indoor location service and management by leveraging the CORE smart space IoT platform. It's designed to let you monitor activities by sensing the location of your assets, so staff and patients can use the data to make improvements. Among them: optimized business/production workflows, enhanced safety and heightened security.