160 manufacturers · 18,987 products

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

A lampholder designed for use with Halogen PAR lamp technology. Front loading of the lamp allows for intuitive relamping. Available in white or black. Ideal for accent and display lighting applocations.

This small aperture housing accepts a wide variety of trims allowing for accent and task lighting, ideal over counters and in display areas. The 4" housing is increasingly used for general lighting with a trim providing for wide beam distribution, in conjunction with an appropriate lighting layout. The H99ICAT housing is designed for direct contact with insulation and the AIR-TITE design meets restricted air flow requirements.

5" Splay with self-flange ring

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers.

HL3 is a family of 3” round and square directional LED recessed luminaires delivering superior performance and value. Equipped with Interchangeable trims and optics, HL3 provides solutions for accent, task, wall washing, and general area illumination. The HL3 family is perfect for residential and light commercial applications where performance and flexibility is key.

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

Downlight shower trim designed for use with IC or Non-IC AIR-TITE™ 3" Halo small aperture line and low voltage housings. Flat frosted perimeter glass provides even illumination. This wet location listed shower trim uses MR16 low voltage or GU10 line voltage lamps. Shower trim offers 360° orientation within housing.

Say goodbye to mounting restrictions and mismatched lighting. The CJB Integrated JBox Downlight installs just about anywhere in the ceiling and has simplified installation with no need to attach the junction box to wood framing because it is already attached to the fixture. This slim LED downlight features two mounting options: fast installation directly into the ceiling with no housing needed or as an LED trim into an existing housing in retrofit situations. It’s the downlight that gives you the freedom to add a fixture where you want, while maintaining an attractive, consistent look.

Recessed 3" aperture shallow new construction housing for use with LED integrated trims. Suitable for 2x6 residential framing or shallow plenum commercial construction, type IC rated and can be used in direct contact with insulation. Airtight rating reduces airflow between living spaces and unconditioned areas providing additional energy savings. Use with compatible HALO® LED integrated trims and modules providing general, task and accent lighting when energy savings, long life and optical control are required.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers.

The Halo LA4 LED Adjustable Downlight series are adjustable LED modules for 4” aperture recessed downlights. The LA4 gimbals feature adjustment of 35-degree tilt and up to 360-degree rotation. The lens provides uniform illumination and wet location listing.. Precision construction makes any housing AIR-TITE for added savings and code compliance.

The Halo Two Circuit Current Limiter is available in End-Feed and Center-feed models. Can be utilized on hard or grid ceilings as well as pendant suspended track. Breaker can be used as an on-off switch and features a “tripped” condition indicator. Feeds employing two circuit breakers do not require breakers to be the same size. Each breaker can be sized according to desired load. Approved by the California Energy Commission – meets Title 24 requirements. cULus Listed

Slope Ceiling Baffle trim in the 6" trim family for use in slope ceiling recessed downlighting.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

4" White eyeball, 30° tilt with self-flange trim ring.

Halo Gimbal lampholders are designed for use with Halo Power-Track and Lazer-by-Halo track systems. Halo Gimbal lampholders utilize standard PAR and halogen PAR lamp technology. Front loading lamp design allows for ease of relamping. They are available in white or black finish and are ideal for accent and display lighting applications.

AIR-TITE Baffle trim in the 6" trim family for use in recessed downlighting.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers.

591WB is a 5-inch aperture shallow baffle with non-electrically conductive “dead front” construction. The baffle and self-flange are polymer. 591WB shallow "dead front" baffle is offered in White baffle with White flange. The shallow trim height provides capability for installation into both shallow and standard 5-inch aperture recessed housings with ML56 LED Light Modules. 591WB LED Trim is an integral element in the Halo ML56 LED Downlighting System. ML56 LED System is a series of modular LED Light Modules for use with dedicated 5” or 6” ML56 LED trims. The ML56 LED trims in 5" and 6” aperture sizes are designed to fit Halo, All-Pro and others 5” or 6” recessed housings.

Adjustable Eyeball trim for 120V line voltage 4" H99 family recessed housings. Eyeball has 30° tilt and can be rotated 360°. Eyeball and die cast trim ring available in a variety of finishes. Three “cat’s paw” springs secure trim in housing. Integral trim socket with screw in plug to housing socket.

Slope Ceiling Reflector trim in the 6" trim family for use in slope ceiling recessed downlighting.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

Oversize trim rings are an essential accessory in downlighting, offering a means to span aperture gaps in retrofitting and to provide forgiving coverage over ceiling cut-out errors.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

With sleek simple lines, numerous beam distributions and color temperatures, and all-encompassing light output levels, Stasis gives the flexibility to create spaces that draw clout, foot traffic, sales and good reviews.

The HALO HLBC is a slim LED downlight designed with visual comfort in mind. It features a regressed prismatic lens for superior glare reduction, while maintaining an ultra-thin 1/2" fixture thickness above the ceiling plane. This means the HALO HLBC can be installed virtually anywhere, regardless of plenum space. The HLBC is perfect for new construction, remodel, or retrofit jobs. The 2-in-1 installation system allows the installer to easily switch from canless installation to retrofit installation. During installation select the perfect color temperature for your space with 5 color temperatures between warm (2700K) to daylight (5000K) or Dim-to-warm option. The dim-to-warm setting begins at 3000K and dims smoothly to 1800K, creating a rich, warm glow resembling candlelight or the sun on the horizon. The HALO HLBC is an ideal solution for residential and light commercial applications where visual comfort and installation flexibility are a priority.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

6" White PAR/BR30 eyeball and self-flange ring with a 35-degree maxium tilt

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

Pinhole trim for 120V line voltage 4" H99 family recessed housings. Die cast trim ring is available in a variety of finishes. Three “cat’s paw” springs secure trim in housing.

Halo Roundback Cylinder lampholders utilize a variety of lamps. Lampholders are yoke mounted and are available in satin white and matte black finishes. Models come in both low and line voltage and also offer optional barn doors, color filters, optical lenses and baffles. Halo Roundback lampholders are compatible with all Halo Power-Trac systems. Ideal for accent and display lighting applications where high coloring rendering and precise beam control are required.

6" Shallow full cone baffle with self-flange ring

6" Full cone reflector with self-flange ring

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

OT999P Oversized white metal trim ring. Compatible with 990, 992, 993, 994, 996, 998, 999, 1419, 1420, 1421, 1493 and 1498. Dimensions: 4” ID x 5 3/4” OD

The HALO LCR Series comes in sizes 2", 4", 6" and 8" wall wash and downlights. This high-powered LED module installs without the use of a recessed housing, reducing time and expense on remodel or new construction. The downlight has a wide distribution pattern ideal for general area illumination and the wall wash illuminates a vertical surface with uniform brightness. The LCR series comes with dual dimming as standard and is designed for residential, mixed-use, and commercial spaces. The LCR has ultimate flexibility with selectable color temperature and lumens. During installation select the perfect color temperature for your space with 6 color temperatures between warm (2700K) to daylight (6500K). Depending on your ceiling height or desired light level choose from several lumen options. The LCR Series features an emergency battery option and designer trims in smooth or baffle.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

Halo Linea Surface-mount channel is used when minimal size and weight are desirable. Typical applications for surface-mount are under-cabinet, in-cabinet, cove and strip lighting. Low-voltage lighting Systems do not require grounding when used with LV500 series isolated power supplies. The lampholder adapter may be inserted in either orientation, simplifying installation and allowing greater than 360° rotation for maximum fixture adjustment.

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. The L942 Flexible Connector simply pushes into the ends of the track, eliminating splicing. To ensure safe operation the entire track, system is fully polarized and grounded.

The Halo H47ICT is designed for sloped ceiling installations for ceilings from 2/12 to 6/12 pitch. The socket aiming mechanism allows the lamp to be aimed straight down in accordance with ceiling pitch (2/12 to 6/12). Designed for use in insulated ceilings.

Baffle trim for 120V line voltage 4" H99 family recessed housings. Die cast trim ring available in a variety of finishes. Three “cat’s paw” springs secure trim in housing.

HALO LED Span fixture family is designed for use as a downlight or wall wash light. The SPAN LED is ideal for applications where a wide even distribution of light is desired. The luminaire can be used to wash a wall with light or as a downlight to evenly illuminate a counter. Utilizing LED technology, it is extremely energy efficient.

The HALO Night Light Canless Downlight comes in sizes 4" and 6" and features two modes: downlight mode for general area illumination and night light mode for a gentle glow illuminating the acrylic trim. Simply toggle your light switch to change modes. Choose your color temperature directly on the fixture for the downlight mode. With the flick of a switch, you can choose between 5 color temperatures ranging from warm (2700K) to daylight (5000K) or choose the warm dimming option to mimic candlelight for mood setting in any space. This canless direct mount downlight does not require a housing for installation. The slim design fits in 2x4 construction or ultra-shallow plenum spaces. The smooth lens and even glow make this the perfect solution in a multitude of residential applications including children’s rooms, bathrooms, hallways, or any space you may need a night light.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

6" Straight metal baffle with two rings narrow and wide.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

The RSQ Series is the perfect lighting solution for low to medium-height ceilings. A shallow square lens and rotatable baffle trim make installation and alignment a breeze. With the Lumen Select Switch and flicker-free 5% dimming, you can easily customize the lighting levels to fit your needs. And the 6-position CCT switch offers a range of 5 color temperatures, plus Dim-to-Warm allowing you to create your own amazing ambiance. HALO RSQ LED Trims are suitable for new construction, remodel, and retrofit installation in most IC (insulation contact) or non-IC housings. They’re AIR-TITE, code-compliant, and provide additional energy savings. Upgrade your lighting with the RSQ Square Recessed LED Trims today.

The Halo RL4 Deep Baffle is a complete LED Bafle-Trim Module for 4-Inch aperture recessed downlights' suitable for new construction, remodel and retrofit installation. The regressed lens provides uniform illumination and 50 degree optical cutoff. The Deep Baffle comes standard with both white and black Coilex baffle insters and is wet location. Precision construction makes any housing AIR-TITE for added savings and code compliance.

5" Regressed adjustable baffle, self-flange ring with a 30-degree maxium tilt

Halo Step Cylinder lampholders come in both line voltage and low voltage models and are available in white or black finish. They are for use with Halo, Power-Trac and Lazer-by-Halo track systems. Lamps supported include R, PAR, A and BR types and several models offer color filters and lens accessories.

Shallow Baffle trim for H25 incandescent housing. Dual position socket support for BR or PAR lamps.

Dome Lens with Reflector trim in the 6" trim family for use in recessed downlighting.

596WB is a 5-inch aperture shallow baffle offered in Matte White with Matte White flange. The shallow trim height provides capability for installation into both shallow and standard 5-inch aperture recessed housings with ML56 LED Light Modules. 596WB LED Trim is an integral element in the Halo ML56 LED Downlighting System. ML56 LED System is a series of modular LED Light Modules for use with dedicated 5” or 6” ML56 LED trims. The ML56 LED trims in 5" and 6” aperture sizes are designed to fit Halo, All-Pro and others 5” or 6” recessed housings.

For use with L1730 lampholder. Accepts one or two L200 Series Lenses, one L275 Cube Cell Louver, or one lens and one louver.

Metal Baffle trim for use with the H5 series housings. Trim includes dual position socket supports for BR and PAR lamps.

The Bachetta series of lampholders offers the beauty and functional design that sophisticated spaces require. The Bachetta family includes lampholders that support 12V MR16 and PAR30/38 lamps. The light weight and small size of this lampholder family makes them ideal for use in museums, galleries, malls, exhibits and similar areas where high interior light is needed. Trim options include color filters, optical lenses and baffle.

Halo Compact Fluorescent Wall Wash is a lampholder designed for use with two energy efficient twin and triple tube compact fluorescent lamps in 18W, 32W, 39W, 40W, 50W, and 55W. The fixture is designed for use with Halo and Lazer-by-Halo track systems. Ideal for wall washing in retail stores, public areas and other commercial spaces. Wall wash Fixtures are used to create architectural interest, add spatial dimensions of the interior, and enhance wall surface textures.

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. Use the Two Circuit Mini Joiner to connect two straight track section where a feed point is not necessary.