160 manufacturers · 18,987 products

This Universal lampholder family from Halo provides a broad range of clean, stylish lighting. The specialized accessories make possible a customized lighting effect and lampholder look. Lampholders are offered in a symmetrical and an asymmetrical version and are for use with Halo, Power-Trac and Lazer-by-Halo track systems.

Splay trim for use with R and PAR lamps in H5 series housings. Dual position socket support for R and PAR lamps.

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. Use the X connector to join four sections of track into a cross configuration.

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. The Two Circuit Live End Connector is used to start a Trac run.

Power-Trac Transformer. Allows use of Linea track fixtures and pendants on Halo Power-Trac or Lazer Track Finishes.

5" Splay socket supporting with self-flange ring.

Live-end feed for HTEK4 two-circuit / two neutral 277V 20 Amp track. Multiple breaker sizes are available. Can be utilized on hard or grid ceilings. Can be used with pendant suspended track. Breaker can be used as an on-off switch. Approved by the California Energy Commission - meets Title 24 requirements. cULus Listed.

5" White PAR20 eyeball, self-flange ring with a 35-degree maxium tilt.

These Wall Washer lampholders feature a cylindrical scoop design that provides broad uniform illumination. Models support R30 and R40 or PAR38 lamps. They are certified for use with Halo and Lazer-by-Halo track and track systems.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

The durable HALO 808 High Performance offers reliable, low-glare, high-power beam performance for accent and display lighting. Featuring high-efficiency LED technology with precision aluminized reflector optics, the 808 delivers energy-saving economical accents to modern spaces. The 808 was engineered to provide exceptional lighting with up to 3,350 lumens and over 35,700 candela of beam power. The beam distribution can also be customized with media, supporting up to two pieces with the media snoot.

This small aperture housing accepts a wide variety of trims allowing for accent and task lighting, ideal over counters and in display areas. The 4" housing is increasingly used for general lighting with a trim providing for wide beam distribution, in conjunction with an appropriate lighting layout. The H995ICATCP housing is designed for direct contact with spray foam or air permeable insulation, with Chicago Plenum rating and the AIR-TITE design meets restricted air flow requirements.

694 Series of 6-Inch aperture eyeball with baffle and self-flange. The precision spun aluminum eyeball with baffle element delivers the functionality of a directional accent. The directional eyeball can be tilted from 0 to 30 degrees, and the rotational mechanism allows for rotation adjustment up to 360 degrees. The 694 series baffles may be used in most standard height 6-Inch aperture recessed housings with ML56 LED Light Modules. 694 Series LED Trims are an integral element in the Halo ML56 LED Downlighting System. ML56 LED System is a series of modular LED Light Modules for use with dedicated 5” or 6” ML56 LED trims. The ML56 LED trims in 5" and 6” aperture sizes are designed to fit Halo, All-Pro and others 5” or 6” recessed housings.

Straight Perforated Bafle, Self-flange

Halo Gimbal lampholders are designed for use with Halo Power-Track and Lazer-by-Halo track systems. Halo Gimbal lampholders utilize standard PAR and halogen PAR lamp technology. Front loading lamp design allows for ease of relamping. They are available in white or black finish and are ideal for accent and display lighting applications.

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

Halo Roundback Cylinder lampholders utilize a variety of lamps. Lampholders are yoke mounted and are available in satin white and matte black finishes. Models come in both low and line voltage and also offer optional barn doors, color filters, optical lenses and baffles. Halo Roundback lampholders are compatible with all Halo Power-Trac systems. Ideal for accent and display lighting applications where high coloring rendering and precise beam control are required.

Adjustable flush gimbal trim is designed for use with IC or Non-IC AIRTITE™ 3" Halo small aperture line and low voltage housings. This die-cast trim is available in multiple finishes to match interior decor. Adjustable gimbal trim uses MR16 low voltage or GU10 line voltage lamps ideal for accent and task lighting. Trim offers 35° tilt, and –15° reverse tilt and 360° orientation within housing.

Halo Roundback Cylinder lampholders utilize a variety of lamps. Lampholders are available in White and Black finishes. Halo Roundback lampholders are compatible with all Halo Power-Trac systems and are ideal for accent and display lighting applications where high coloring rendering and precise beam control are required.

Open trim in the 6" trim family for use in recessed downlighting.

5" Open with self-flange ring.

Adjustable pinhole with specular clear reflector designed for use with IC or Non-IC AIR-TITE™ 3" Halo small aperture line and low voltage housings. Trim ring is available in multiple finishes to match interior decor. Pinhole trim uses MR16 low voltage or GU10 line voltage lamps ideal for accent and task lighting. Trim offers 15° tilt, and 360° orientation within housing.

592 Series of 5-inch aperture reflectors with self-flange. The precision spun aluminum reflector provides excellent optical performance. The 592 series reflectors may be used in most standard height 5-inch aperture recessed housings with ML56 LED Light Modules. 592 Series LED Reflector Trims are an integral element in the Halo ML56 LED Downlighting System. ML56 LED System is a series of modular LED Light Modules for use with dedicated 5” or 6” ML56 LED trims. The ML56 LED trims in 5" and 6” aperture sizes are designed to fit Halo, All-Pro and others 5” or 6” recessed housings.

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. Join three trac sections with left hand polarity with the Left T Connector.

The Classic pendants family from Halo includes 5 different styles with glass or metal shades. Clean simple lines blend with a variety of interior spaces and provide effective task or accent lighting. The shapes include soft cones, cylinders and tall cones of cased glass in white, amber or blue. These line and low voltage Cylinder Pendants use MR16, T4, A15 or G16.5 lamps.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

Use HALO Mounting Frames to ensure the proper placement and alignment of canless LED downlights in new construction applications. With HALO Mounting Frames, you don’t need a full recessed housing. They help you meet code requirements by holding the fixture's remote junction box during rough-in. They also make the trim-out phase easier for installers. HALO Mounting Frames are available in multiple sizes, with contractor-friendly features like adjustable hanger bars, Got Nail™ captive pre-installed nails, and integrated thumb screws for holding canless junction boxes in place.

The Bachetta series of lampholders offers the beauty and functional design that sophisticated spaces require. The Bachetta family includes lampholders that support 12V MR16 and PAR30/38 lamps. The light weight and small size of this lampholder family makes them ideal for use in museums, galleries, malls, exhibits and similar areas where high interior light is needed. Trim options include color filters, optical lenses and baffle.

Smart control made simple. The Pure Smart™ Wi-Fi ON/OFF Switch upgrades any standard light to smart functionality with no hub required. From the wall, the app, or your voice, control traditional lighting loads with ease — while unlocking scheduling, grouping, and automation through the WiZ ecosystem. Designed for pros but simple enough for anyone, this switch brings smart convenience to every room.

Adjustable square baffle designed for use with IC or Non-IC AIR-TITE™ 3” Halo small aperture line and low voltage housings. This die-cast aluminum trim is available in multiple finishes to match interior decor. Trim uses low voltage MR16 or GU10 line voltage lamps ideal for accent and task lighting. Trim offers 15° tilt and integral 350° lamp holder rotation with locking thumbscrew. The trim construction allows use with the Halo H3 series of standard round aperture housings.

Halo offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and trac adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers

Halo Roundback Cylinder lampholders utilize a variety of lamps. Lampholders are available in White and Black finishes. Halo Roundback lampholders are compatible with all Halo Power-Trac Systems and are ideal for accent and display lighting applications where high coloring rendering and precise beam control are required.

HALO offers a wide variety of accessories that complement our broad track lighting product line: dichroic color filters, barn door shutters, beam concentrators, clips, springs and holders, transformers, power supplies, lamp holders, canopy adapters, base and slope adapters, showroom and track adapters. Also available are continental cylinders, louvers, lenses, light shields, pendant and outlet adapters, framing projectors and wall washers.

Self Flanged Reflector trim in the 6" trim family for use in recessed downlighting.

This Universal lampholder family from Halo provides a broad range of clean, stylish lighting. The specialized accessories make possible a customized lighting effect and lampholder look. Lampholders are offered in a symmetrical and an asymmetrical version and are for use with Halo, Power-Trac and Lazer-by-Halo track systems.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

692 Series of 6-Inch aperture reflectors with self-flange. The precision spun aluminum reflector provides excellent optical performance. The 692 series reflectors may be used in most standard height 6-Inch aperture recessed housings with ML56 LED Light Modules. 692 Series LED Reflector Trims are an integral element in the Halo ML56 LED Downlighting System. ML56 LED System is a series of modular LED Light Modules for use with dedicated 5” or 6” ML56 LED trims. The ML56 LED trims in 5" and 6” aperture sizes are designed to fit Halo, All-Pro and others 5” or 6” recessed housings.

Adjustable Coilex® baffle trim designed for use with IC or Non-IC AIRTITE™ 3" Halo small aperture line and low voltage housings. Trim ring is available in multiple finishes to match interior decor. Baffle trim uses MR16 low voltage or GU10 line voltage lamps ideal for accent and task lighting. Trim offers 35° tilt, and 360° orientation within housing.

Scoop wall wash trim for 120V line voltage 4" H99 family recessed housings. Trim can be rotated 360° to align with wall surface. Scoop and die cast trim ring available in a variety of finishes. Three “cat’s paw” springs secure trim in housing.

HALO LTE LED Trims are an economical version of our LT Series with the same non-conductive, dead-front baffle trim and flat, diffuse lens design. Available with dedicated 3000K CCT and flicker-free dimming to 10% in convenient bulk packs. Suitable for new construction, remodel, and retrofit installation in IC (insulation contact) or non-IC housings. These fixtures meet AIR-TITE and code compliance for additional energy savings. LTE Bulk Packs are an excellent choice when you need a low-cost alternative to HALO LT or RL Series.

High Coilex™ baffle for deep regressed lamp position with H5 non-IC housings. Dual position socket support for R, BR or PAR lamps.

593 Series of 5-inch aperture baffles with self-flange. The 593 series of spun aluminum baffles may be used in most standard height 5-inch aperture recessed housings with ML56 LED Light Modules. 593 Series LED Trims are an integral element in the Halo ML56 LED Downlighting System. ML56 LED System is a series of modular LED Light Modules for use with dedicated 5” or 6” ML56 LED trims. The ML56 LED trims in 5" and 6” aperture sizes are designed to fit Halo, All-Pro and others 5” or 6” recessed housings.

Recessed 3" aperture shallow housing for use with LED integrated trims. Installs from below the ceiling and suitable for 2x6 residential or shallow plenum commercial construction. Suitable for direct contact with insulation; airtight rating reduces airflow between living spaces and unconditioned areas providing additional energy savings. Use with compatible HALO® LED integrated trims and modules providing general, task and accent lighting when energy savings, long life and optical control are required.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

These canless LED downlights deliver fast, efficient installation without the need for a recessed housing, mounting directly into the ceiling for both remodel and new construction to save time and reduce labor costs; now featuring patented Flip-N-Klip™ Locking Springs, they lock upright during installation and removal to help prevent painful snap-back while improving control and safety; the low-profile design fits tight spaces without sacrificing performance, providing bright, crisp 90+ CRI light with field-selectable color temperature and Dim-to-Warm capability to fine-tune any environment; with long-life performance, flexible configuration, and installer-focused innovation, RL remains a reliable, cost-effective lighting solution.

The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.

This Universal lampholder family from Halo provides a broad range of clean, stylish lighting. The specialized accessories make possible a customized lighting effect and lampholder look. Lampholders are offered in a symmetrical and an asymmetrical version and are for use with Halo, Power-Trac and Lazer-by-Halo track systems.

For use with L4007 to attach L1967 Barn Doors or L200 Series uv/color filters or L275 louver.

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

Live-end feed for TEK4 two-circuit / two neutral 120V 20 Amp track. Multiple breaker sizes are available. Can be utilized on hard or grid ceilings. Can be used with pendant suspended track. Breaker can be used as an on-off switch. Approved by the California Energy Commission - meets Title 24 requirements. cULus Listed.

The Gimbal series of lampholders is designed for use with Halo Linea and Lazer track Systems and utilizes standard PAR and halogen PAR lamp technology. Front loading of the lamp allows ease of relamping. Available in white, black or silver finish. Ideal for accent and dramatic display applications. Trim options include color filters, optical lenses, barn door, louver and baffle.

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

Open Frosted Glass trim for 120V line voltage 4" H99 family recessed housings. Available in either frosted natural finish or frosted blue glass. Three barb springs secure trim in housing. Positive lock retaining strap included.

Versatility has always been the hallmark of track lighting. The modular construction of track and the adjustment capabilities of the trackheads allow the ability to place light exactly where needed and to easily adapt to changing display needs and retail and hospitality configurations.

5" Shallow full cone baffle with self-flange ring

Halo Step Cylinder lampholders come in both line voltage and low voltage models and are available in white or black finish. They are for use with Halo, Power-Trac and Lazer-by-Halo track systems. Lamps supported include R, PAR, A and BR types and several models offer color filters and lens accessories.

Lensed showerlight trim for 120V line voltage 4" H99 family recessed housings. Non-conductive, non-corosive polymer trim available in a variety of finishes. Pebble finish glass lens and full reflector for even light distribution. The 951 trim is wet location listed for use as a showerlight. Three “cat’s paw” springs secure trim in housing.

The Gimbal series of lampholders is designed for use with Halo Linea and Lazer track Systems and utilizes standard PAR and halogen PAR lamp technology. Front loading of the lamp allows ease of relamping. Available in white, black or silver finish. Ideal for accent and dramatic display applications. Trim options include color filters, optical lenses, barn door, louver and baffle.

Halo Roundback Cylinder lampholders utilize a variety of lamps. Lampholders are available in White and Black finishes. Halo Roundback lampholders are compatible with all Halo Power-Trac Systems and are ideal for accent and display lighting applications where high coloring rendering and precise beam control are required.

The HLC Tapered Disk Lights deliver a low-profile, flush ceiling finish with ultra-fast installation from below the ceiling. Designed for high-volume residential applications, they mount directly to compatible junction boxes with no clips or plates required. The twist-release lens allows quick access to the 5-position CCT switch, making color selection simple. Available in economical bulk packs for streamlined contractor installs.