160 manufacturers · 18,987 products

The LH01 is unique due to theregressed lens, which helps reduce glare and surface brightness. The mud-over flanges allow for easy installation. Made from anodized aluminum it has great heat dissipation capabilities.

The LF01 is a flangeless mud-over extrusion with regressed lens, helping to not only reduce glare and surface brightness but also creating beautiful and unobtrusive light lines, integrating seamlessly into many architectural applications.

The LE05 is a micro grazer with a regressed light source and therefore very low glare, great for the perimeter. Made from anodized aluminum it provides good heat dissipation.

The LD01 is aflangeless mud-overextrusion created from anodized aluminum that transforms perimeters into a beautiful glow which visually disconnects wall from ceiling. This extrusion’s innovative design allows for an invisible light source , making it a unique and outstanding architectural detail of immense esthetical beauty.

JM02 is an extrusion that was made specifically for Beulux’ line voltage tape, Madrid. It will show no pixilation with both the 270lm/ft and 500 lm/ft Madrid. Made from high quality aluminum alloy, it consists of an inner extrusion and an outer extrusion. The inner one holds the Madrid tape very well in place and is then clicked into the outer extrusion to guarantee easy installation.

Specification grade, flexible LED sheet with minimal cutting increments

Specification grade, flexible LED sheet with minimal cutting increments

DMX Decoder – RGBW, 4 Channel, 120V DDMX4C -120V

BE01 is a very common recessed extrusion as it is still quite small but can hold all lumen output tapes of the Beulux range. Made from anodized aluminum it has great heat dissipation capabilities.

BA02 is made from anodized aluminum and is large enough to incorporate the 120V Madrid tape as well as the Flexbeam but can be equipped with most Beulux’s tape lights. Its versatility allows for use as surface mount, recessed, and pendant mount.

AC02 is made from high quality aluminum and offers a round lens which provides a softer look and a wider distribution angle (180°), therefore also providing lateral light. Made from anodized aluminum it has great heat dissipation capabilities.

AB02 is the perfect extrusion for shelves, under cabinet, and more occasions where small and unobtrusive lighting solutions are required. The sleek design integrates discretely and still offers powerful illumination. The intelligent engineering allows for easy installation without any visible screws. Made from anodized aluminum it has great heat dissipation capabilities.

The VT03 is a medium size extrusion constructed from high quality anodized aluminum that can be suspended as contemporary pendant light, or surface mounted for a sophisticated modern light fixture. The VT03 is accessorized with low-profile mounting hardware; when paired with the VT03-SL, a satined polycarbonate diffusor, creates a cylindrical look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 37⁄64 x 25⁄64CustomizationCut to specified length VT03

The JG04 is a 90° extrusion created from high quality anodized aluminum MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 3⁄16 x 1 3⁄16CustomizationCut to specified length JG04

XT01 is a very common recessed extrusion as it is still quite small but can hold all lumen output tapes of the Beulux range. Made from anodized aluminum it has great heat dissipation capabilities. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 29⁄32 x 49⁄64CustomizationCut to specified length XT01

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.

The CT06 is a unique extrusion that is made from high quality anodized aluminum, it is compact giving this extrusion dual functionality as both a closet rod and lighting fixture. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 19⁄32 x 11⁄32CustomizationCut to specified length CT06

The UT01 is an inground extrusion that is made of high-quality anodized aluminum, this extrusion is very strong and durable, making it perfect for indoor residential or commercial applications. This extrusion pairs with the UT01-SL, which is a sturdy polycarbonate lens that makes it walk-over enabled and emits a smooth line of light for a polished look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 55⁄64 x 1CustomizationCut to specified length UT01

The LB03OUT is a unique extrusion with innovative design that allows to transform an outer dry wall corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length LB03OUT

The PH02 is a recessed or surface mounted walk-over fixture that consists of the outer solid aluminum and the sturdy inner, one-piece PMMA extrusion. This fixture can withstand a maximum weight of 30kN and is considered IP67. This extrusion creates uniform light lines and can be used as single fixture or combining several fixtures without shadows, to create continuous seamless light lines and makes for an excellent outdoor and indoor linear light. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 13⁄16 x 1 49⁄64CustomizationCut to specified length PH02

The VT02 is a slim extrusion constructed from high quality anodized aluminum that can be suspended as contemporary pendant light, or surface mounted for a sophisticated modern light fixture. The VT02 is accessorized with low-profile mounting hardware; when paired with the VT02-SL, a satined polycarbonate diffusor, creates a cylindrical look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 53⁄64 x 9⁄32CustomizationCut to specified length VT02

The AL02 was designed as a very versatile extrusion that is known for its capabilities to bend to fit new and creative applications. Can be used surface mount or as a pendant.

The AA07 was created with bathrooms and kitchen areas in mind; this under tile extrusion is constructed from high quality anodized aluminum and is used to create lineation between tiles or to beautifully end a line of tiles. This creates a sublime accent for counters and vanities alike and it can be mounted horizontally or vertically for added customization. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 31⁄64 x 7⁄16CustomizationCut to specified length AA07

The LB03OUT is a unique extrusion with innovative design that allows to transform an outer dry wall corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length

The JD01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 2 39⁄64 x 39⁄64CustomizationCut to specified length JD01

The JC01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 2 x 39⁄64CustomizationCut to specified length JC01

The JB01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x W 1 27⁄64 x 39⁄64CustomizationCut to specified length JB01

The JA01 is a flangeless pocket extrusion that combines a hidden light source with a smooth angle in the extrusion to exude an exquisite glow onto floors, walkways, stairs and can also be used as an uplight (to replace a cove). MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 39⁄64 x 2 13⁄64CustomizationCut to specified length JA01

The AG01 is a recessed flangeless extrusion that is constructed using anodized aluminum and it is designed to be used for wall and ceiling, with easy installation. This extrusion can have diffusors up to 19’ 6” length, creating a seamless look for longer runs.

The JF04 is a small 90° extrusion that was created from high quality anodized aluminum. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 5⁄8 x 5⁄8CustomizationCut to specified length JF04

The YT02 is a small surface mounted extrusion that is made using quality anodized aluminum. Offering great heat dissipation capabilities, the YT02 is best suited for a low-medium output tape light range. The YT line is known for its size and versatility in applications, which can help facilitate the project specification process. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 11⁄16 x 11⁄32CustomizationCut to specified length YT02

The VT02 is a slim extrusion constructed from high quality anodized aluminum that can be suspended as contemporary pendant light, or surface mounted for a sophisticated modern light fixture. The VT02 is accessorized with low-profile mounting hardware; when paired with the VT02-SL, a satined polycarbonate diffusor, creates a cylindrical look. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 53⁄64 x 9⁄32CustomizationCut to specified length VT02

The AL02 was designed as a very versatile extrusion that is known for its capabilities to bend to fit new and creative applications. Can be used surface mount or as a pendant. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 45⁄64 x 5⁄32CustomizationCut to specified length AL02

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.