160 manufacturers · 18,987 products

• AC input voltage range: 100-277V • Low power consumption and high reliability • 8-15s delay when turn off • Strong anti interference ability • Switch life is greater than 5000 cycles • Approved application patent • Suitable for dry and humid environment

EMWP-CR7054

Limited Warranty: 5 yearsWattage: 9WColor Temperature: Standard 4000KEfficacy: Up to 70LPWLumen output: 630lm • Non dimmable

• Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Wet location use • Innovative, easy installation in minutes • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 3.6 V 500mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed

The LGA-1 Surface Mount fixture features our innovative Point Source Louver (PSL) design that utilizes high-efficiency 90+ CRI chips for precise light management while exceeding the Well Building standard for glare reduction. With an impressive light output of up to 159 lm/W, this fixture offers specified lumen outputs (SLO) ranging from 131 to 1179 lumens per foot. Its minimalistic 1.5” aperture and low-profile design enhance its aesthetic appeal, while the toolless latch system and Quick-Click 5-Wire setup ensure simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.

Laguna 1 Suspended delivers refined architectural lighting with advanced optical performance, featuring a minimalist 1.5" aperture and low-profile form. The Point Source Louver (PSL) optics provide a deeper louver and “extra quiet” visual experience. Engineered to meet or exceed WELL Building standards for glare control, it combines aesthetics with comfort. The fixture offers a readily accessible integral driver and a unique slider optic removal system for effortless installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White come standard. Proudly crafted in Huntington Beach, CA and BABA compliant in most configurations.

The LGADU-1P Direct/Indirect Suspended fixture features innovative Point Source Louver (PSL) design that utilizes high-efficiency 90+ CRI chips for precise light management, exceeding the Well Building standard for glare reduction. With a Brilliant by Design™ philosophy, this fixture combines a minimalistic aesthetic with advanced louvered optic solution. It delivers exceptional light output of up to 159 lm/W, with specified lumen outputs (SLO) ranging from 131-1179 lumens per foot. The minimalistic 1.5” aperture and low-profile design enhance its sleek appearance, while the innovative slider optic removal system ensures easy installation and serviceability. The fixture is available in individual lengths and seamless continuous runs, and it incorporates a toolless latch system and Quick-Click 5-Wire setup for simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.

The LGA-1R-LP Recessed LoPro delivers refined visual comfort and superior performance with Point Source Louver (PSL) optics. PSL offers an 80° deeper louver for an “extra quiet” visual experience—both designed to meet or exceed WELL Building glare standards. This low-profile fixture features a minimalist 1.5" aperture and supports a variety of ceiling integration options, including Trim Flange, Spackle Flange, multiple Grid Lay-in and Tegular systems, Bolt Slot, and Armstrong Interlude/USG Identitee. An innovative slider optic removal system ensures easy installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. Specified Lumen Outputs (SLO) available. Proudly crafted in Huntington Beach, CA and BABA approved in most configurations.

The HTG-1PR-LP LoPro Flush Perimeter fixture offers versatile mounting options with Trimless, Trim Flange, and T-Grid flush configurations. Engineered for low-profile installations, it fits within a slim 2.85"–3.05" depth behind the ceiling, ideal for low-plenum spaces. Designed with uncompromised performance, it provides exceptional glare control with options for diffused (Lambertian) or room-fill optics. With a minimalistic 1.5” aperture and specified lumen outputs (SLO) from 224 lm/ft to 1754 lm/ft, the fixture is available in individual lengths or continuous runs up to 300 feet with no lens breaks. Accessibility is simplified with a patented, toolless “Push to Eject” system, along with a Toolless Latch System and Quick-Click 5-Wire setup for fast, seamless installation. Each fixture is proudly crafted in Huntington Beach, CA, USA.

The HTG-3PR-LP LoPro Flush Perimeter fixture is available in versatile mounting options, including Trimless, Trim Flange, and T-Grid configurations. Designed for low-plenum installations, it features a low-profile depth of 2.85”–3.05” (integral driver). The fixture offers advanced optics with options for glare control, diffused (Lambertian), or room fill optics, ensuring optimal lighting performance. With specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft, it boasts a minimalistic 3” aperture and can be configured in individual lengths or seamless continuous runs up to 300 feet without lens breaks. Accessibility for drivers, wiring, and serviceability is streamlined through a patented toolless “Push to Eject” system, while the toolless latch system and Quick-Click 5-Wire setup enable simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.

The HTG-3PR Regress Perimeter fixture features versatile mounting options, including Trimless, Trim Flange, and T-Grid regressed configurations, making it suitable for a variety of applications. It accommodates multi-depth ceiling options for most plenum installations, with a 1.75” regress requiring a depth of 5.75”–6.13” (integral driver) and a 3” regress needing 7”–7.38” (remote driver). Designed for optimal performance optics. The fixture boasts a minimalistic 3” aperture and specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft. Available in individual lengths or seamless continuous runs up to 300 feet with no lens breaks, the HTG-3PR ensures easy accessibility for drivers, wiring, and serviceability from below the ceiling, thanks to its patented toolless “Push to Eject” system. Additionally, the toolless latch system and Quick-Click 5-Wire setup facilitate simple and quick installation. Proudly crafted in Huntington Beach, CA, USA.

The HTG-1P Suspended fixture combines sleek architectural design with high-performance lighting, made possible by innovative Microstructure EdgeTech Optics™. Offering seamless illumination and uniformity, it supports a range of optical distributions including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, Room Fill, and Ceiling Wash. With a minimal 1.5" aperture and ultra-low profile, the HTG-1P delivers clean lines and uninterrupted rows up to 250 feet—free of lens breaks, pixelation, or hot spots. Installation is fast and tool-free with the patented “Push to Eject” system. Direct or Indirect orientations are available, along with versatile mounting options: standard aircraft cable or 361° locking rotational aircraft cable. Choose between integral or remote driver configurations, all with concealed hardware for a polished finish. Available with Specified Lumen Outputs (SLO) up to 1480 lm/ft and standard 90+ CRI with optional Tunable White. Custom powder coat finishes are also offered to suit any design vision.

The HTG-3P is a 3-inch suspended linear fixture with Microstructure EdgeTech Optics™ for precise control and seamless, uniform illumination. It supports Batwing, Glare Control, Diffused, Wall Wash, and Ceiling Wash optics, with a low-profile depth of 1.38 to 3.4 inches. Designed to match the HTGDU-3P for architectural consistency, it offers continuous runs up to 250 feet, toolless “Push to Eject” access, and aircraft cable or 361° locking mounting. Available with multiple driver options, custom finishes, and SLO up to 1754 lm/ft. Proudly made in Huntington Beach, CA and BABA compliant.

The HTG-3R-LP delivers high-output performance and architectural elegance in a low-profile design, ideal for any plenum-restricted installation. With depths ranging from 1.5"–1.75" (remote driver) or 2.14"–2.45" (integral driver), it features a sleek 3" aperture and supports Batwing, Glare Control, Diffused (Lambertian), or Wall Wash optics. Offering Specified Lumen Outputs (SLO) from 224 to 1754 lm/ft, the fixture supports seamless runs up to 250 feet with no lens breaks and up to 16’ on-center spacing at 35fc. All components—including drivers and wiring—are accessible from below the ceiling via the patented toolless “Push to Eject” system. Fast, clean installation is ensured with the Toolless Latch and Quick-Click 5 Wire system. Compatible with multiple ceiling types, including Trim and Spackle Flange, Grid Lay-in and Tegular (15/16” or 9/16”), Bolt Slot, Armstrong Interlude/USG Identitee, and 4” TechZone™ for seamless integration. Proudly crafted in Huntington Beach, CA – USA

Engineered for plenum-constrained spaces, the HTG-1R-LP Recessed LoPro delivers high-performance illumination with an ultra-slim profile—just 1.5" to 1.75" deep with remote driver, and 2.14" to 2.45" with integral driver. Featuring a minimalistic 1.5" aperture, it supports Batwing, Glare Control, Diffused (Lambertian), or Wall Wash optics for tailored performance without design compromise. Achieve seamless continuous runs up to 250 feet, with uniform light and no lens breaks. Delivering up to 1480 lm/ft with 90+ CRI and optional Tunable White, the fixture enables up to 16' on-center spacing at 35fc. Installation and maintenance are simplified with the patented toolless “Push to Eject” system, Toolless Latch System, and Quick-Click 5 Wire connection. Compatible with a wide range of ceiling types including Trim Flange, Spackle Flange, 15/16” or 9/16” Grid Lay-in and Tegular, Bolt Slot, or Armstrong Interlude/USG. BABA/BABAA compliant in most configurations – contact factory for details.

The HTGDU-1W Arm Mount delivers precision illumination through advanced Microstructure EdgeTech Optics™ and individually controlled direct and indirect MEO™ optics. Its minimalist 1.5" aperture and ultra-low profile support PRO optic options—including Ceiling Wash, Wall Wash, and Diffused (Lambertian)—with Narrow Distribution available for wall wash applications. Engineered for versatility, it features 361° locking rotational arm hubs with beautifully machined end caps and matching hardware, plus an innovative, toolless “Push to Eject” system for effortless installation and service. Custom powder coat finishes and Specified Lumen Outputs (SLO) up to 1480 lm/ft. are available, with 90+ CRI standard and Tunable White optional. Proudly crafted in Huntington Beach, CA, and BABA compliant in most configurations.

The HTG-1 Surface combines sleek design with advanced performance, featuring Microstructure EdgeTech Optics™ for precise light control, seamless illumination, and superior uniformity. With a minimalist 1.5" aperture and ultra-low profile, it offers flexible optic options including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, and Room Fill. Available in individual lengths or seamless runs up to 250 feet with no lens breaks or hotspots. Installation is quick and easy with the innovative toolless “Push to Eject” system, and the design features no visible fasteners for a clean aesthetic. Choose from integral or remote drivers, custom powder coat finishes, and SLO outputs up to 1480 lm/ft with 90+ CRI standard. Tunable White available. Proudly made in Huntington Beach, CA and BABA compliant in most configurations.

Designed for direct T-Grid mounting, the HTG-3 Surface T-Grid delivers seamless integration and high-performance illumination with a minimal 3" aperture and ultra-slim 1.38" depth. Featuring Microstructure EdgeTech Optics™ (MEO™), it offers optic options including Batwing, Glare Control, Diffused (Lambertian), and Wall Wash. Achieve clean, continuous runs up to 250 feet with no lens breaks or hotspots, and design flexibility with mitered lit corners. The innovative toolless “Push to Eject” system and flush T-Grid mounting make installation fast and clean. Supports 16' on-center spacing with Batwing optics and offers SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White options. Available in custom powder coat finishes. Proudly made in Huntington Beach, CA and BABA compliant in most configurations.

Engineered for direct T-Grid mounting, the HTG-1 Surface T-Grid delivers sleek, integrated performance with a minimalist 1.5" aperture and ultra-low profile. Powered by Microstructure EdgeTech Optics™ (MEO™), it offers a variety of precision optics including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, and Room Fill. Designed for visual comfort and performance, it supports outputs from 193 to 1480 lm/ft. Available in 2'–8' lengths or seamless continuous runs up to 250 feet without lens breaks or hotspots. Mitered lit corners align cleanly with T-Grid layouts. Features include a toolless “Push to Eject” system for effortless installation and a flush T-Grid mounting mechanism. Custom powder coat finishes, 90+ CRI, Tunable White, and BABA compliance available. Proudly crafted in Huntington Beach, CA.

Innovative Microstructure EdgeTech Optics delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control or Diffused (Lambertian). • Full 361° locking rotational arm hubs. • MEOTM allows for minimalistic 1.5” Aperture fixtures with extremely low profiles. • Wall Arm Mount with 1” rotational hub. • Optional Ceiling Arm Mount with 1” rotational hub. • Innovative Toolless “Push to Eject” System allows for easy installation and serviceability. • Beautifully machined end caps and matching arm hardware. • Specified Lumen Outputs (SLO) available. • Proudly crafted in Huntington Beach, CA - USA.

The HTG-3W, a 3" Aperture Wall Mount Linear fixture, incorporates innovative Microstructure EdgeTech Optics™ (MEO™) for exceptional optical control, ensuring seamless illumination and uniformity in performance. This sleek fixture offers a minimalistic, low-profile design, made possible by MEO™ technology, and is available in individual lengths or continuous runs up to 300 feet without lens breaks. Installation is simplified with a patented tool-less "Push to Eject" system, allowing for easy serviceability, and the design is free of visible fasteners, delivering a clean, refined aesthetic. Standard finishes include silver anodized, powder-coated white, and powder-coated black, with additional custom anodized and powder-coated RAL options available for a tailored aesthetic. HTG-3W fixture is proudly crafted in Huntington Beach, CA, USA.

The HTG-1P-RD-PDS combines cutting-edge Microstructure EdgeTech Optics™ with a minimalist suspension design for sleek, high-performance lighting. With a discreet 1/8” silver or white cord and chrome-plated connectors, each suspension cable carries both positive and negative conductors and supports drops up to 10 feet. This ultra-low-profile 1.5" aperture fixture delivers seamless, uniform illumination with your choice of Batwing, Glare Control, Diffused (Lambertian), Wall Wash, Room Fill, or Ceiling Wash optics. Available in direct or indirect configurations, with individual lengths or continuous runs up to 250 feet—free from lens breaks or pixelation. Installation is quick and easy with the toolless “Push to Eject” system. Features include custom powder coat finishes, SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White. Proudly made in Huntington Beach, CA and BABA compliant in most configurations.

The HTGDU-3W is a 3-inch direct/indirect rotational arm mount fixture featuring Microstructure EdgeTech Optics™ for superior optic control and seamless illumination. With full 361° locking rotational hubs, individually controlled direct and indirect outputs, and minimalist MEO™ design, it offers flexible performance and clean aesthetics. Includes toolless “Push to Eject” access, integral or remote driver options, precision-machined components, and SLO up to 1480 lm/ft. 90+ CRI standard with Tunable White available. Proudly made in Huntington Beach, CA and BABA compliant.

Innovative Microstructure EdgeTech Optics™ delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control, Diffused (Lambertian) Optics. MEO™ allows for minimalistic 3” Aperture fixtures with extremely low profiles. Individual fixture lengths and seamless continuous rows with no lens breaks up to 400 feet. Innovative Toolless “Push to Eject” system allows for easy installation and serviceability. No visible fasteners Custom powder coat and anodized finishes Specified Lumen Outputs (SLO) available Proudly crafted in Huntington Beach, CA – USA.

Innovative Microstructure EdgeTech Optics™ delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control or Diffused Optics. MEO™ allows for minimalistic 1.5” Aperture fixtures with extremely low profiles. Direct or Indirect illumination. Individual fixture lengths and seamless continuous rows with no lens breaks up to 400 feet. Window mullion mount or over doorways Remote and Integral Driver options Mullion mount — Innovative Toolless “Push to Eject” system allows for easy installation and serviceability. No visible fasteners Custom powder coat and anodized finishes Specified Lumen Outputs (SLO) available Proudly crafted in Huntington Beach, CA – USA.

The HTG-1W Rotational Arm Mount combines sleek design with powerful performance, featuring Microstructure EdgeTech Optics™ for precise light control, uniform illumination, and exceptional visual comfort. With a minimalist 1.5" aperture and ultra-low profile, it supports Batwing, Glare Control, or Diffused optics in direct or indirect configurations. Ideal for mounting to window mullions or over doorways, the fixture is available in individual lengths or seamless continuous runs up to 250 feet without lens breaks. The toolless “Push to Eject” system ensures easy installation and serviceability, with no visible fasteners for a clean architectural finish. Offered with remote or integral driver options, custom powder coat and anodized finishes, and specified lumen outputs. Proudly made in Huntington Beach, CA.

The Huntington 3 is a 3" aperture fixture that mounts directly to the T-Grid for seamless performance and integration. • Specify Batwing, Glare Control, Diffused (Lambertian) optics or Wall Wash Optics. • MEOTM allows for minimalistic 3” Aperture fixture while only being 1.38” deep. • High performance with visual comfort (224-1713 lm/ft). • Individual fixture lengths and seamless continuous rows with no lens breaks, pixelation or hotspots up to 400 feet. • Mitered lit corner patterns. • Innovative Toolless “Push to Eject” System allows for easy installation and serviceability. • Innovative T-Grid mounting mechanism for flush T-Grid surface mounting. • 16’ on center spacing with MEOBW (Batwing). • Custom powder coat and anodized finishes. • Specified Lumen Outputs (SLO) available. • Proudly crafted in Huntington Beach, CA - USA.

The HTGDU-1P features cutting-edge Microstructure EdgeTech Optics™ for unmatched optical control and seamless, uniform illumination. Offering a minimalist 1.5" aperture and ultra-low profile, it supports a range of customizable optics - including Batwing, Glare Control, Diffused, Room Fill, Ceiling Wash, and Wall Wash. Individually controlled direct and indirect MEO™ optics deliver tailored lumen output. Available with custom powder coat finishes, tool-free installation, and flexible mounting options including 361° rotational aircraft cable. Choose from integral, remote, or emergency drivers, with SLO outputs up to 1480 lm/ft. Available as 90+ CRI standard, with Tunable White available. Made in Huntington Beach, CA and BABA compliant in most configurations.

The HB3015 RGB Series delivers vibrant, full‑color exterior illumination in a slim, architectural profile built for grazing, wall washing, and expressive cove lighting

The HB3016 RGBW Series brings full‑color expression and high‑quality white light together in a compact, design‑forward exterior luminaire

The Smart Lighting Company’s HB1814 Series brings vibrant, even illumination to exterior coves, accents, and wall‑wash applications—all within an ultra‑compact housing that disappears into the architecture

The HB3024PD Series delivers clean, continuous exterior lines of light for edge, direct‑view, and accent applications

Engineered for both indirect and direct illumination, this linear series delivers high‑performance output in a compact, architectural form

The HB308i Series delivers 359 lm/ft of clean, uniform illumination for interior flood lighting, wall washing, grazing, and cove accents—all within a low‑profile housing that fits effortlessly into tight architectural details

The HB40HP RGBW Series from Smart Lighting Company is a high-performance exterior linear LED fixture designed for architectural grazing, wall washing, and flood lighting applications

The HB3014R Series brings a polished, design‑forward approach to exterior illumination, delivering 365–567 lm/ft of smooth, consistent light from a discreet linear profile that blends effortlessly into the architecture

The HB3018PD RGB Series delivers vibrant, direct‑view color for exterior edge, accent, and façade‑outline applications

The HB3014i Series delivers high‑performance interior illumination in a discreet, low‑profile form ideal for wall washing, grazing, and cove lighting

The HB3036PD RGBW Series delivers smooth, continuous direct‑view illumination for exterior edges, outlines, and accent lines

The HB1856 RGBW Series brings dynamic, color‑changing performance to exterior coves, accents, wall washing, edges, borders, and general lighting—all within a discreet 0.79" × 1.5" profile that disappears into the architecture.

The Smart Lighting Company’s HB1828 Series brings bright, even illumination to exterior coves, accents, borders, and general lighting—all within a sleek, low‑profile housing that blends seamlessly into the architecture

The HB308 Series combines optical accuracy, installation flexibility, and spec‑grade performance in a compact exterior linear form

The HB5240 Series is an IP66‑rated, high‑powered linear fixture designed for narrow exterior spaces, cove lighting, and flood applications

A compact, high‑efficiency recessed luminaire for exterior ceilings and walls, this fixture delivers specification‑grade performance from a low‑profile, powder‑coated housing that blends cleanly into canopies, soffits, overhangs, and wall‑mounted details

Engineered for long‑run performance and architectural subtlety, the HB3014 Series combines optical accuracy, installation flexibility, and spec‑grade reliability in a compact exterior form

This Class I Division 1 luminaire can be used as a spot light, down light, tunnel light, or strip light which can provide general illumination in hazardous locations, such as: 1. Oil refineries and Gas stations 2. Oil and gasoline loading docks 3. Distilleries 4. Painting manufacturing plants 5. Pumping stations 6. Mines 7. Vessels 8. Other high humidity, high temperature, or dusty locations

This Class I Division 2 luminaire can be used as a spot light, down light, tunnel light, or strip light which can provide general illumination in hazardous locations, such as: 1. Oil refineries and Gas stations 2. Oil and gasoline loading docks 3. Distilleries 4. Painting manufacturing plants 5. Pumping stations 6. Mines 7. Vessels 8. Other high humidity, high temperature, or dusty locations

This Class I Division 1 luminaire can be used as spot light, down light and tunnel light, low bay which can provide general illumination in hazardous locations, such as: 1. Oil refineries and Gas stations 2. Oil and gasoline loading docks 3. Distilleries 4. Painting manufacturing plants 5. Pumping stations 6. Mines 7. Vessels 8. Other high humidity, high temperature, dusty locations

This Class I Division 1 luminaire can be used as a spot light, down light, tunnel light, or area light which can provide general illumination in hazardous locations, such as: 1. Oil refineries and Gas stations 2. Oil and gasoline loading docks 3. Distilleries 4. Painting manufacturing plants 5. Pumping stations 6. Mines 7. Vessels 8. Other high humidity, high temperature, or dusty locations

This Class I Division 1 luminaire can be used as a spot light, down light, tunnel light, or strip light which can provide general illumination in hazardous locations, such as: 1. Oil refineries and Gas stations 2. Oil and gasoline loading docks 3. Distilleries 4. Painting manufacturing plants 5. Pumping stations 6. Mines 7. Vessels 8. Other high humidity, high temperature, or dusty locations

This Class I Division 1 luminaire can be used as a spot light, down light, tunnel light, low bay, or high bay which can provide general illumination in hazardous locations, such as: 1. Oil refineries and Gas stations 2. Oil and gasoline loading docks 3. Distilleries 4. Painting manufacturing plants 5. Pumping stations 6. Mines 7. Vessels 8. Other high humidity, high temperature, or dusty locations

This Class I Division 2 luminaire can be used as a spot light, down light, tunnel light, or strip light which can provide general illumination in hazardous locations, such as: 1. Oil refineries and Gas stations 2. Oil and gasoline loading docks 3. Distilleries 4. Painting manufacturing plants 5. Pumping stations 6. Mines 7. Vessels 8. Other high humidity, high temperature, or dusty locations

This Class I Division 2 luminaire can be used as a spot light, down light, tunnel light, flood light and wall pack which can provide general illumination in hazardous locations, such as: 1. Oil refineries and Gas stations 2. Oil and gasoline loading docks 3. Distilleries 4. Painting manufacturing plants 5. Pumping stations 6. Mines 7. Vessels 8. Other high humidity, high temperature, or dusty locations

Shape offers the choice of aesthetically pleasing lens style to add visual appeal to office space. The back-lit LED engine with TIR optic ensures visual comfortable illumination.

Direct mount canless downlight with deep arch bezel • Small 2.6” aperture but powerful up to 800LM output • IC and Damp location rated with FT6/CMP plenum rated cable • Multiple optic option with excellent glare control and visual cut-off • 90CRI, 5CCT field changeable standard • Warm dim 3000-1800K optional

Direct mount canless downlight with quiet ceiling multi-cell design. Wet location, IC rated with FT6/CMP plenum rated cable

The gooseneck light is easy to install directly to a wall. The optional photocell provides reliable dusk-to-dawn operation and the multi-volt electronics allows for 120-277V operation.

Second Gen High Bay Round

Vapor Tight

Edge Lit Round Pendant Series